MacPress Fitting Reducer 22mm x 15mm - WATER

The MacPress Fitting Reducer 22mm x 15mm offers a seamless and secure reduction between pipe sizes in heating, hot water, and potable water systems. WRAS approved and M-profile design for leak-free reliability. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacPress Fitting Reducer 28mm x 15mm - WATER

The MacPress Fitting Reducer 28mm x 15mm offers a seamless and secure reduction between pipe sizes in heating, hot water, and potable water systems. WRAS approved and M-profile design for leak-free reliability. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacPress Fitting Reducer 28mm x 22mm - WATER

The MacPress Fitting Reducer 28mm x 22mm offers a seamless and secure reduction between pipe sizes in heating, hot water, and potable water systems. WRAS approved and M-profile design for leak-free reliability. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacPress Fitting Reducer 35mm x 22mm - WATER

The MacPress Fitting Reducer 35mm x 22mm offers a seamless and secure reduction between pipe sizes in heating, hot water, and potable water systems. WRAS approved and M-profile design for leak-free reliability. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacPress Fitting Reducer 35mm x 28mm - WATER

The MacPress Fitting Reducer 35mm x 28mm offers a seamless and secure reduction between pipe sizes in heating, hot water, and potable water systems. WRAS approved and M-profile design for leak-free reliability. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacPress Fitting Reducer 42mm x 22mm - WATER

The MacPress Fitting Reducer 42mm x 22mm offers a seamless and secure reduction between pipe sizes in heating, hot water, and potable water systems. WRAS approved and M-profile design for leak-free reliability. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacPress Fitting Reducer 42mm x 28mm - WATER

The MacPress Fitting Reducer 42mm x 28mm offers a seamless and secure reduction between pipe sizes in heating, hot water, and potable water systems. WRAS approved and M-profile design for leak-free reliability. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacPress Fitting Reducer 42mm x 35mm - WATER

The MacPress Fitting Reducer 42mm x 35mm offers a seamless and secure reduction between pipe sizes in heating, hot water, and potable water systems. WRAS approved and M-profile design for leak-free reliability. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacPress Fitting Reducer 54mm x 28mm - WATER

The MacPress Fitting Reducer 54mm x 28mm offers a seamless and secure reduction between pipe sizes in heating, hot water, and potable water systems. WRAS approved and M-profile design for leak-free reliability. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacPress Fitting Reducer 54mm x 35mm - WATER

The MacPress Fitting Reducer 54mm x 35mm offers a seamless and secure reduction between pipe sizes in heating, hot water, and potable water systems. WRAS approved and M-profile design for leak-free reliability. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacPress Fitting Reducer 54mm x 42mm - WATER

The MacPress Fitting Reducer 54mm x 42mm offers a seamless and secure reduction between pipe sizes in heating, hot water, and potable water systems. WRAS approved and M-profile design for leak-free reliability. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.