MacPress Reducer 22mm x 15mm - GAS

Compatibility: Connection: ‘M’ Profile Tube: Copper tube made in accordance with EN1057 Parameters: Temperature Range: -20°C to 70°C Maximum Pressure: 5 Bar Materials: ‘O’ Ring: HNBR (Hydrogenated Nitrile Butadiene Rubber) Copper: CW024A Brass: CW511L Approvals: Made in accordance with EN 1254 Applications: 1st, 2nd & 3rd Family Gases Compressed Air *For above ground use only*

MacPress Reducer 28mm x 15mm - GAS

The MacPress Reducer 28mm x 15mm – GAS offers a reliable solution for reducing the gas supply from 28mm to 15mm. Featuring a yellow gas O-ring for easy identification and guaranteed compliance with industry standards.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacPress Reducer 28mm x 22mm - GAS

The MacPress Reducer 28mm x 22mm – GAS offers a reliable solution for reducing the gas supply from 28mm to 22mm. Featuring a yellow gas O-ring for easy identification and guaranteed compliance with industry standards.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacPress Reducer 35mm x 22mm - GAS

The MacPress Reducer 35mm x 22mm – GAS offers a reliable solution for reducing the gas supply from 35mm to 22mm. Featuring a yellow gas O-ring for easy identification and guaranteed compliance with industry standards.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacPress Reducer 35mm x 28mm - GAS

The MacPress Reducer 35mm x 28mm – GAS offers a reliable solution for reducing the gas supply from 35mm to 28mm. Featuring a yellow gas O-ring for easy identification and guaranteed compliance with industry standards.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacPress Reducer 42mm x 28mm - GAS

The MacPress Reducer 42mm x 28mm – GAS offers a reliable solution for reducing the gas supply from 42mm to 28mm. Featuring a yellow gas O-ring for easy identification and guaranteed compliance with industry standards.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.