MacPress Gas Obtuse Elbows from MacDonald Plumbing & Heating Supplies http://www.macdonaldplumbingsupplies.com/rss/1/productlistings/macpress-gas-obtuse-elbows/cat2091 <p data-start="712" data-end="1172">The <strong data-start="751" data-end="781">MacPress Gas Obtuse Elbows</strong> range is engineered to deliver safe and reliable directional changes within gas pipework without the need for hot works. Featuring press fit technology, these elbows allow installers to create strong mechanical joints quickly and safely, reducing installation time and improving on site safety. This makes them especially suitable for installations in occupied buildings or confined spaces.</p> <p data-start="1174" data-end="1483">Manufactured to comply with BS EN 1254 7:2021, <strong data-start="1221" data-end="1251">MacPress Gas Obtuse Elbows</strong> provide consistent performance and long term reliability. The obtuse angle design offers greater flexibility than standard elbows, allowing for smoother pipe runs and reduced stress on the system while maintaining optimal gas flow.</p> <p data-start="1485" data-end="1727">These fittings are suitable for a wide operating temperature range and feature low thermal expansion, helping maintain system integrity over time. When used with compatible press tools, the joints are permanent, secure and resistant to leaks.</p> <p>&nbsp;</p> <p data-start="1729" data-end="1994">Backed by a 20 year warranty, <strong data-start="1759" data-end="1789">MacPress Gas Obtuse Elbows</strong> form an essential part of the complete MacPress gas press system. They allow installers to achieve compliant, professional installations using a single trusted press fit method throughout the gas network.</p> Copyright 2026 MacDonald Plumbing & Heating Supplies en Sun, 11 Oct 2026 02:05:06 +0100 Sun, 11 Oct 2026 02:05:06 +0100 Sun, 11 Oct 2026 02:05:06 +0100 MacPress Obtuse Elbow 15mm - GAS MacPress Obtuse Elbow 15mm - GAS

MacPress Obtuse Elbow 15mm - GAS

The MacPress 15mm Obtuse Gas Elbow is BS EN 1254-7 approved, featuring a yellow O-ring and gas marking for clear gas system identification. Ideal for gentle directional changes in gas pipework, it delivers a secure, flame-free press connection.&nbsp; Installation Instructions for Press Fittings &nbsp; 1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the &lsquo;O&rsquo; ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw. &nbsp;

 /metal-fittings-c1/macpress-fittings-gas-c233/macpress-gas-obtuse-elbows-c2091/macdonald-plumbing-supplies-macpress-obtuse-elbow-15mm-gas-p13446 /metal-fittings-c1/macpress-fittings-gas-c233/macpress-gas-obtuse-elbows-c2091/macdonald-plumbing-supplies-macpress-obtuse-elbow-15mm-gas-p13446 Sun, 11 Oct 2026 02:05:06 +0100 MacPress Obtuse Elbow 22mm - GAS MacPress Obtuse Elbow 22mm - GAS

MacPress Obtuse Elbow 22mm - GAS

The MacPress 22mm Obtuse Gas Elbow is BS EN 1254-7 approved, featuring a yellow O-ring and gas marking for clear gas system identification. Ideal for gentle directional changes in gas pipework, it delivers a secure, flame-free press connection.&nbsp; Installation Instructions for Press Fittings &nbsp; 1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the &lsquo;O&rsquo; ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw. &nbsp;

 /metal-fittings-c1/macpress-fittings-gas-c233/macpress-gas-obtuse-elbows-c2091/macdonald-plumbing-supplies-macpress-obtuse-elbow-22mm-gas-p13494 /metal-fittings-c1/macpress-fittings-gas-c233/macpress-gas-obtuse-elbows-c2091/macdonald-plumbing-supplies-macpress-obtuse-elbow-22mm-gas-p13494 Sun, 11 Oct 2026 02:05:06 +0100 MacPress Obtuse Elbow 28mm - GAS MacPress Obtuse Elbow 28mm - GAS

MacPress Obtuse Elbow 28mm - GAS

The MacPress 28mm Obtuse Gas Elbow is BS EN 1254-7 approved, featuring a yellow O-ring and gas marking for clear gas system identification. Ideal for gentle directional changes in gas pipework, it delivers a secure, flame-free press connection.&nbsp; Installation Instructions for Press Fittings &nbsp; 1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the &lsquo;O&rsquo; ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw. &nbsp;

 /metal-fittings-c1/macpress-fittings-gas-c233/macpress-gas-obtuse-elbows-c2091/macdonald-plumbing-supplies-macpress-obtuse-elbow-28mm-gas-p13666 /metal-fittings-c1/macpress-fittings-gas-c233/macpress-gas-obtuse-elbows-c2091/macdonald-plumbing-supplies-macpress-obtuse-elbow-28mm-gas-p13666 Sun, 11 Oct 2026 02:05:05 +0100 MacPress Obtuse Elbow 35mm - GAS MacPress Obtuse Elbow 35mm - GAS

MacPress Obtuse Elbow 35mm - GAS

The MacPress 35mm Obtuse Gas Elbow is BS EN 1254-7 approved, featuring a yellow O-ring and gas marking for clear gas system identification. Ideal for gentle directional changes in gas pipework, it delivers a secure, flame-free press connection.&nbsp; Installation Instructions for Press Fittings &nbsp; 1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the &lsquo;O&rsquo; ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw. &nbsp;

 /metal-fittings-c1/macpress-fittings-gas-c233/macpress-gas-obtuse-elbows-c2091/macdonald-plumbing-supplies-macpress-obtuse-elbow-35mm-gas-p13784 /metal-fittings-c1/macpress-fittings-gas-c233/macpress-gas-obtuse-elbows-c2091/macdonald-plumbing-supplies-macpress-obtuse-elbow-35mm-gas-p13784 Sun, 11 Oct 2026 02:05:06 +0100 MacPress Obtuse Elbow 42mm - GAS MacPress Obtuse Elbow 42mm - GAS

MacPress Obtuse Elbow 42mm - GAS

The MacPress 42mm Obtuse Gas Elbow is BS EN 1254-7 approved, featuring a yellow O-ring and gas marking for clear gas system identification. Ideal for gentle directional changes in gas pipework, it delivers a secure, flame-free press connection.&nbsp; Installation Instructions for Press Fittings &nbsp; 1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the &lsquo;O&rsquo; ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw. &nbsp;

 /metal-fittings-c1/macpress-fittings-gas-c233/macpress-gas-obtuse-elbows-c2091/macdonald-plumbing-supplies-macpress-obtuse-elbow-42mm-gas-p13800 /metal-fittings-c1/macpress-fittings-gas-c233/macpress-gas-obtuse-elbows-c2091/macdonald-plumbing-supplies-macpress-obtuse-elbow-42mm-gas-p13800 Sun, 11 Oct 2026 02:05:06 +0100 MacPress Obtuse Elbow 54mm - GAS MacPress Obtuse Elbow 54mm - GAS

MacPress Obtuse Elbow 54mm - GAS

The MacPress 54mm Obtuse Gas Elbow is BS EN 1254-7 approved, featuring a yellow O-ring and gas marking for clear gas system identification. Ideal for gentle directional changes in gas pipework, it delivers a secure, flame-free press connection.&nbsp; Installation Instructions for Press Fittings &nbsp; 1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the &lsquo;O&rsquo; ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw. &nbsp;

 /metal-fittings-c1/macpress-fittings-gas-c233/macpress-gas-obtuse-elbows-c2091/macdonald-plumbing-supplies-macpress-obtuse-elbow-54mm-gas-p13807 /metal-fittings-c1/macpress-fittings-gas-c233/macpress-gas-obtuse-elbows-c2091/macdonald-plumbing-supplies-macpress-obtuse-elbow-54mm-gas-p13807