MacDonald Plumbing Supplies MacVessel Sealed System Filling Kit

The MacVessel Sealed System Filling Kit provides the essential components required for filling and monitoring sealed central heating systems using expansion vessels from 8 to 80 litres. The kit includes a filling loop with two 15mm compression fittings, a 3 bar safety relief valve and gauge, a 3/4 inch manifold, and a red or blue safety valve cap. Supplied as a convenient kit, it helps installers bring the key components together for efficient system installation and servicing. Suitable for use with a range of sealed heating systems and expansion vessel sizes.

MacDonald Plumbing Supplies Refill For The MacPack Endfeed Starter Pack

The Refill For The MacPack Endfeed Starter Pack provides a complete replacement selection of high-quality WRAS approved endfeed fittings from MacDonald Plumbing Supplies. Containing 255 popular 15mm and 22mm fittings, including couplings, 90 degree elbows, equal tees, reducing tees and reducers, this refill pack is designed to replenish your existing MacPack storage case without purchasing another case. Ideal for plumbers and heating engineers who regularly use endfeed fittings on professional installations. Pack Contents 50 x MacEndfeed Coupling 15mm WRAS Approved 25 x MacEndfeed Coupling 22mm WRAS Approved 50 x MacEndfeed 90 Degree Elbow 15mm WRAS Approved 50 x MacEndfeed 90 Degree Elbow 22mm WRAS Approved 25 x MacEndfeed Equal Tee 15mm WRAS Approved 20 x MacEndfeed Equal Tee 22mm WRAS Approved 10 x MacEndfeed Reducing Tee 22mm x 22mm x 15mm WRAS Approved 25 x MacEndfeed Fitting Reducer 22mm x 15mm WRAS Approved

MacDonald Plumbing Supplies MacPack Solder Ring Starter Pack

The MacPack Solder Ring Starter Pack provides a comprehensive selection of high-quality WRAS approved solder ring fittings from MacDonald Plumbing Supplies. Supplied in a practical FatMac storage case, the pack contains popular 15mm and 22mm couplings, elbows, equal tees, reducing tees and reducers, making it ideal for a wide range of plumbing installations. The compact design of the solder ring fittings makes them particularly useful when working in areas where space is limited. Pack Contents 1 x FatMac Storage Case 50 x MacSolder Ring Coupling 15mm WRAS Approved 25 x MacSolder Ring Coupling 22mm WRAS Approved 50 x MacSolder Ring 90 Degree Elbow 15mm WRAS Approved 50 x MacSolder Ring 90 Degree Elbow 22mm WRAS Approved 25 x MacSolder Ring Equal Tee 15mm WRAS Approved 20 x MacSolder Ring Equal Tee 22mm WRAS Approved 10 x MacSolder Ring Reducing Tee 22mm x 22mm x 15mm WRAS Approved 25 x MacSolder Ring Fitting Reducer 22mm x 15mm WRAS Approved

Advantay Safety Outlet Discharge Terminal Guard 210mm x 115mm x 90mm

The Advantay Safety Outlet Discharge Terminal Guard 210mm x 115mm x 90mm is designed to protect exposed safety valve discharge outlets and overflow terminals from accidental damage while helping to improve safety around external pipe terminations. Manufactured with a durable brown plastic-coated finish, this robust guard provides reliable protection in domestic and commercial installations. Its compact design makes it suitable for a wide range of heating and plumbing applications where discharge pipework requires safeguarding.

Press Mate Pro Press Lubrication 150ml

The Press Mate Pro Press Lubrication 150ml is a professional-grade dry lubricant designed to improve the performance and longevity of press tools. Formulated with natural oils, it delivers smoother, more consistent crimps while protecting seals and O-rings from damage. Suitable for most press jaws, it reduces friction, wear and drag, helping engineers achieve reliable results with minimal mess on every job.

Conex Bänninger CLEARANCE - Conex B Press Reducer Bundle

Conex B Press Reducer Bundle consisting of: 21 x 22 - 15mm 3 x 28 - 15mm 10 x 28 - 22mm   Please note quantities +/- 2 Non refundable sale item

MacDonald Plumbing Supplies Refill For The MacPack Press Starter Kit For Water 22mm Fittings

The Refill For The MacPack Press Pack For Water 22mm. This refill kit is tailor-made for plumbing professionals who use the MacPress system and need a fresh supply of premium 22mm copper press fittings. Designed for use in potable water, sealed heating systems, and hot water circuits, every fitting is WRAS approved and made for secure, flame-free installation. The pack includes elbows, couplings, equal tees, reducers, and reducing tees – all engineered for reliability and leak-free performance. Supplied in quantities that suit real-world installation demands, this refill pack is a smart, timesaving addition to your MacPack setup. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPack Press Starter Kit For Water 22mm Fittings

The MacPack Press Pack For Water 22mm Fittings is your complete solution for fast, safe, and professional-grade water installations. Designed around the industry-trusted MacPress M-profile press system, this pack includes a hand-picked selection of high-quality 22mm fittings, ideal for use in potable water, heating, and hot water systems. Engineered for clean, flame-free installation, the fittings require no solder, flux, or compound making them perfect for both domestic and commercial environments. Each component is WRAS approved and backed by a 20-year manufacturer’s warranty, ensuring a secure and long-lasting fit every time. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies Refill For The MacPack Press Starter Kit For Water 15mm Fittings

The MacPack Press Refill Pack For Water 15mm Fittings is ideal for topping up your stock of the most-used water press fittings. Designed to match the quality and compatibility of MacPress M profile fittings, this refill pack ensures you always have essential components on hand. With a practical selection of 15mm couplings, elbows, tees, reducers, and reducing tees, it's perfect for professionals working on potable water, hot water, and heating installations. These flame-free fittings provide a fast, clean and safe solution with reliable performance. Fully WRAS approved and BS EN compliant, this pack keeps your installations efficient and up to standard. Not suitable for use with MLCP pipe and fittings. Installation Instructions for Press Fittings 1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPack Press Starter Kit For Water 15mm Fittings

The MacPack Press Pack For Water 15mm Fittings is a purpose-built solution designed for fast, safe, and clean water installations. Ideal for both domestic and commercial applications, this all-in-one pack contains a selection of premium 15mm MacPress water press fittings including couplings, elbows, tees, reducers, and reducing tees. Thanks to its flame-free installation process, it eliminates the need for hot works while maintaining a high standard of performance and safety. Every fitting uses the reliable “M” profile for secure press connections. The included fittings are WRAS approved and manufactured to meet the highest quality and compliance standards. Backed by a 20-year manufacturer’s warranty, this pack offers peace of mind and long-term durability. Installation Instructions for Press Fittings  1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacScale 15mm Electrolytic Scale Reducer

The MacScale 15mm Electrolytic Scale Reducer is an effective, maintenance-free solution designed to reduce limescale build-up in plumbing systems. Suitable for both domestic and commercial use, it provides whole house protection using an electrolytic process that requires no chemicals or power. WRAS approved and easy to install with 15mm compression fittings, it helps extend the life of appliances and pipework.

MacDonald Plumbing Supplies MacScale 15mm Electrolytic Scale Reducer

The MacScale 15mm Electrolytic Scale Reducer is an effective, maintenance-free solution designed to reduce limescale build-up in plumbing systems. Suitable for both domestic and commercial use, it provides whole house protection using an electrolytic process that requires no chemicals or power. WRAS approved and easy to install with 15mm compression fittings, it helps extend the life of appliances and pipework.

MacDonald Plumbing Supplies MacTRV 15mm White Head TRV & Lockshield Pack

The MacTRV 15mm White Head TRV & Lockshield Pack is a complete solution for controlling radiator temperature efficiently. Featuring a 15mm angled thermostatic radiator valve and matching lockshield, it allows precise heat regulation while improving energy efficiency. With a liquid-filled sensor and built-in frost protection, it ensures consistent performance in domestic heating systems.

MacDonald Plumbing Supplies MacEndfeed Swept Branch Tee 22mm WRAS APPROVED & KITE MARKED

The Endfeed Swept Branch Tee, 22mm, is a WRAS approved and Kite marked fitting designed for reliable and secure connections in plumbing systems. Its high-quality construction ensures durability and compliance with industry standards.

MacDonald Plumbing Supplies Refill For The MacPack Press Starter Kit For Gas

The Refill For The MacPack Press Starter Pack For Gas is designed to replenish your MacPress Starter Pack 1 with essential components for ongoing gas system installations. It includes 90 fittings to ensure your projects run smoothly and efficiently. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPack Press Starter Kit For Gas

Top up your MacPress fitting stock with the MacPack Press Refill Pack For Water – 15mm Fittings, designed for professional installers who value speed, safety, and simplicity. This refill pack includes 105 premium-quality 15mm M Profile press fittings for water applications – all neatly stored in a robust FatMac case for easy access on-site. Suitable for potable water, heating, and hot water systems, each fitting is WRAS Approved and compatible with standard copper tube. Perfect for topping up your MacPress Water Starter Pack or expanding your on-the-go fitting kit. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies Refill For The MacPack Solder Ring Starter Pack

The Refill For The MacPack Solder Ring Starter Pack provides a complete replacement selection of high-quality WRAS approved solder ring fittings from MacDonald Plumbing Supplies. Containing 255 popular 15mm and 22mm fittings, including couplings, 90 degree elbows, equal tees, reducing tees and reducers, this refill pack is designed to replenish your existing MacPack storage case without purchasing another case. Ideal for plumbers and heating engineers who regularly use solder ring fittings on professional installations. Pack Contents 50 x MacSolder Ring Coupling 15mm WRAS Approved 25 x MacSolder Ring Coupling 22mm WRAS Approved 50 x MacSolder Ring 90 Degree Elbow 15mm WRAS Approved 50 x MacSolder Ring 90 Degree Elbow 22mm WRAS Approved 25 x MacSolder Ring Equal Tee 15mm WRAS Approved 20 x MacSolder Ring Equal Tee 22mm WRAS Approved 10 x MacSolder Ring Reducing Tee 22mm x 22mm x 15mm WRAS Approved 25 x MacSolder Ring Fitting Reducer 22mm x 15mm WRAS Approved

MacDonald Plumbing Supplies MacPack Endfeed Starter Pack

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies Refill For The MacPack Press Starter Kit For Water

The Refill For The MacPack Press Starter Pack For Water provides a comprehensive, professional-grade selection of MacPress M-profile press fittings. Specially curated for potable water and heating systems, this refill pack ensures you have the most commonly used fittings readily available for seamless installation work. From elbows and couplings to equal tees and reducers, each component in this pack is engineered for flame-free, WRAS-approved connections that deliver long-term leak-free performance. Designed to work flawlessly with copper pipe, the refill pack offers dependable quality for installers who demand reliability, efficiency, and peace of mind. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPack Press Starter Kit For Water

The MacPack Press Starter Pack For Water is a comprehensive solution for plumbing professionals working on water system installations. This starter pack includes an essential selection of WRAS Approved MacPress fittings designed for domestic and commercial water applications, including potable water, heating, and hot water systems. All fittings feature a high-performance M-Profile design that ensures fast, secure, and flame-free connections. With no need for hot works, this kit saves time on-site while ensuring full compliance with BS EN standards. Supplied in a durable FatMac case, the pack is ideal for installers looking for reliable, professional-grade fittings. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

Danfoss RAS-C2 15mm TRV & LS 013G6005

This Danfoss RAS-C2 15mm TRV & LS 013G6005 set includes a RAS-C2 sensor, RA-FS 15 mm bidirectional angle valve, and a matching lockshield valve. It is designed for precise temperature regulation and offers efficient control over your heating system. The set is easy to install and comes in a clean, white finish (RAL 9016) that complements any décor.

MacDonald Plumbing Supplies MacEndfeed Female Adaptor 28mm x 1 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Male Adaptor 28mm x 1 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Female Adaptor 15mm x 1/4 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Female Adaptor 15mm x 1/2 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Female Adaptor 22mm x 3/4 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Female Adaptor 42mm x 1 1/2 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Female Adaptor 54mm x 2 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Male Adaptor 15mm x 1/4 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Male Adaptor 15mm x 1/2 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Male Adaptor 22mm x 3/4 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Male Adaptor 35mm x 1 1/4 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Male Adaptor 42mm x 1 1/2 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Male Adaptor 54mm x 2 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Male Elbow 15mm x 1/2 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Female Elbow 15mm x 1/2 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Female Elbow 15mm x 1/2 WRAS APPROVED & KITE MARKED (COPPER VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications, including central heating and hot & cold water supplies. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies meet BSEN1254 standard and are WRAS approved high quality products. Sizes range from 8mm to 54mm plus fittings are suitable for use with potable water, central heating and gas.

MacDonald Plumbing Supplies MacEndfeed Male Adaptor 15mm x 3/4 WRAS APPROVED & KITE MARKED (COPPER VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications, including central heating and hot & cold water supplies. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies meet BSEN1254 standard and are WRAS approved high quality products. Sizes range from 8mm to 54mm plus fittings are suitable for use with potable water, central heating and gas.

MacDonald Plumbing Supplies MacEndfeed 90 Degree Long Tail Street Elbow 22mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed 90 Degree Long Tail Street Elbow 15mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacPress Female Reducing Tee 15mm x 15mm x ½ - GAS

The MacPress Female Reducing Tee 15mm x 15mm x ½ – GAS provides a secure press-fit solution with two 15mm copper ends and a ½ inch BSP female threaded branch. Designed for gas installations, this tee features a yellow O-ring and full compliance with BS EN 1254-7. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Female Coupling 15mm x ½ - GAS

The MacPress Female Coupling 15mm x ½ – GAS is designed to connect 15mm copper pipe to ½ BSP female threaded components, specifically for gas applications. Featuring a yellow gas O-ring and compliance with BS EN 1254-7 standards. Backed by a 20-year warranty.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Coupling 15mm x ¾ - GAS

The MacPress Female Coupling 15mm x ¾ – GAS is designed to connect 15mm copper pipe to ¾ BSP female threaded components, ideal for gas applications. Featuring a yellow gas O-ring and compliance with BS EN 1254-7 standards. Backed by a 20-year warranty.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Backplate Elbow 15mm x ½ - GAS

The MacPress Backplate Elbow 15mm x ½ – GAS connects 15mm copper pipe to a ½ BSP male thread, perfect for gas applications. Featuring a yellow gas O-ring and compliance with BS EN 1254-7 standards. Supported by a 20-year warranty.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducing Tee 22mm x 22mm x 15mm - GAS

The MacPress 22mm x 22mm x 15mm Reducing Tee – GAS is a high-performance press-fit gas fitting designed for professional installers. Clearly marked for gas use with a yellow O-ring, this reducing tee ensures safe, efficient installation.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducing Tee 28mm x 28mm x 15mm - GAS

The MacPress 28mm x 28mm x 15mm Reducing Tee – GAS provides a secure and efficient way to branch off a 15mm pipe from a 28mm gas supply. Fully certified and designed for quick, flame-free installation.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducing Tee 22mm x 15mm x 22mm - GAS

The MacPress 22mm x 15mm x 22mm Reducing Tee – GAS is a professional-grade press-fit solution for branching gas supply pipework. Featuring a yellow O-ring and M Profile compatibility, it delivers fast, flame-free installation and long-term reliability.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Coupling 15mm x ½ - GAS

The MacPress Male Coupling 15mm x ½" – GAS provides a secure transition from copper pipe to threaded fittings in gas systems. Engineered with a yellow O-ring and designed for safe, flame-free gas installations.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reduced Coupling 22mm x 15mm - WATER

The MacPress Reduced Coupling 22mm x 15mm is a WRAS approved copper press fitting designed to securely join different pipe sizes in water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reduced Coupling 28mm x 15mm - WATER

The MacPress Reduced Coupling 28mm x 15mm is a WRAS approved copper press fitting designed to securely join different pipe sizes in water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacEndfeed Equal Tee 54mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacPress Reducer 28mm x 15mm - GAS

The MacPress Reducer 28mm x 15mm – GAS offers a reliable solution for reducing the gas supply from 28mm to 15mm. Featuring a yellow gas O-ring for easy identification and guaranteed compliance with industry standards.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacEndfeed 90 Degree Street Elbow 54mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed 90 Degree Street Elbow 42mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Equal Tee 42mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacSolder Ring Fitting Reducer 35mm x 15mm

Our Solder Ring fittings are manufactured with lead free solder and are suitable for use with potable water, central heating and gas. Solder Ring Fittings benefit from a pre-soldered ring that saves time when installing new pipework or repairing and old run.

MacDonald Plumbing Supplies MacPress Stop End 15mm - GAS

The MacPress 15mm Stop End is a robust and reliable press-fit fitting designed for safely terminating gas pipe runs, featuring a yellow O-ring and gas conformity marking for clear identification.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Equal Tee 15mm - GAS

The MacPress 15mm Equal Tee is a high-quality gas fitting featuring a yellow O-ring and gas conformity marking, designed for safe and secure press-fit connections in gas systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacEndfeed Equal Tee 35mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed 90 Degree Elbow 54mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacPress Fitting Reducer 28mm x 15mm - WATER

The MacPress Fitting Reducer 28mm x 15mm offers a seamless and secure reduction between pipe sizes in heating, hot water, and potable water systems. WRAS approved and M-profile design for leak-free reliability. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducer 22mm x 15mm - GAS

Compatibility: Connection: ‘M’ Profile Tube: Copper tube made in accordance with EN1057 Parameters: Temperature Range: -20°C to 70°C Maximum Pressure: 5 Bar Materials: ‘O’ Ring: HNBR (Hydrogenated Nitrile Butadiene Rubber) Copper: CW024A Brass: CW511L Approvals: Made in accordance with EN 1254 Applications: 1st, 2nd & 3rd Family Gases Compressed Air *For above ground use only*

MacDonald Plumbing Supplies MacEndfeed Reducing Coupling 28mm x 15mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed 90 Degree Street Elbow 35mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacPress Obtuse Elbow 15mm - GAS

The MacPress 15mm Obtuse Gas Elbow is BS EN 1254-7 approved, featuring a yellow O-ring and gas marking for clear gas system identification. Ideal for gentle directional changes in gas pipework, it delivers a secure, flame-free press connection.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Street Elbow 15mm - GAS

The MacPress 15mm Street Elbow is designed for gas installations, featuring a yellow O-ring and gas conformity marking, ensuring a safe and secure press-fit connection for natural gas and LPG systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacCompression Reducer Single Part 28mm x 15mm

Discover top-quality Compression Reducer Single Parts, ideal for various applications including central heating and hot & cold water supplies. No soldering or heat required, these fittings provide a reliable solution for areas with limited space. WRAS approved and compliant with BSEN1254-2 standards, ensuring suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacPress Elbow 15mm - GAS

The MacPress 15mm Gas Elbow features a yellow O-ring and gas conformity marking, offering a reliable, flame-free solution for directional changes in copper gas pipework for both domestic and commercial applications.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Obtuse Street Elbow 15mm - GAS

The MacPress 15mm Obtuse Street Elbow is designed for gas pipe installations. Featuring a yellow O-ring and clear gas markings, this fitting offers reliable and secure press-fit connections for natural gas and LPG systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacEndfeed 90 Degree Elbow 42mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacPress Coupling 15mm - GAS

The MacPress 15mm Gas Coupling features a yellow O-ring and gas conformity marking, offering a safe and certified solution for connecting copper pipe in domestic and commercial gas installations. Installation Instructions for Press Fittings 1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacEndfeed Coupling 54mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacPress Fitting Reducer 22mm x 15mm - WATER

The MacPress Fitting Reducer 22mm x 15mm offers a seamless and secure reduction between pipe sizes in heating, hot water, and potable water systems. WRAS approved and M-profile design for leak-free reliability. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacSolder Ring Fitting Reducer 28mm x 15mm

Our Solder Ring fittings are manufactured with lead free solder and are suitable for use with potable water, central heating and gas. Solder Ring Fittings benefit from a pre-soldered ring that saves time when installing new pipework or repairing and old run.

MacDonald Plumbing Supplies MacCompression Reducer Single Part 15mm x 8mm

Discover top-quality Compression Reducer Single Parts, ideal for various applications including central heating and hot & cold water supplies. No soldering or heat required, these fittings provide a reliable solution for areas with limited space. WRAS approved and compliant with BSEN1254-2 standards, ensuring suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacCompression Reducer Single Part 15mm x 10mm

Discover top-quality Compression Reducer Single Parts, ideal for various applications including central heating and hot & cold water supplies. No soldering or heat required, these fittings provide a reliable solution for areas with limited space. WRAS approved and compliant with BSEN1254-2 standards, ensuring suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacCompression Reducer Single Part 22mm x 15mm

Discover top-quality Compression Reducer Single Parts, ideal for various applications including central heating and hot & cold water supplies. No soldering or heat required, these fittings provide a reliable solution for areas with limited space. WRAS approved and compliant with BSEN1254-2 standards, ensuring suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacEndfeed Part Crossover 15mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Full Crossover 15mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Bent Tap Connector 15mm x 3/4 WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Fitting Reducer 35mm x 15mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed 45 Degree Street Obtuse Elbow 28mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Coupling 42mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed 90 Degree Street Elbow 28mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed 90 Degree Elbow 35mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Straight Tap Connector 15mm x 3/4 WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Reducing Coupling 22mm x 15mm WRAS APPROVED

The MacEndfeed Reducing Coupling 22mm x 15mm WRAS APPROVED is a high-quality copper fitting designed to connect 22mm pipe to 15mm pipe in plumbing and heating systems. Compact and reliable, it provides a strong, permanent connection when soldered, making it ideal for use in tight or restricted spaces. WRAS approved for potable water use, it ensures safe and dependable performance across a wide range of applications.

MacDonald Plumbing Supplies MacEndfeed Equal Tee 28mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Reducing Coupling 15mm x 10mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Female Adaptor 22mm x 3/4 WRAS APPROVED & KITE MARKED (COPPER VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications, including central heating and hot & cold water supplies. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies meet BSEN1254 standard and are WRAS approved high quality products. Sizes range from 8mm to 54mm plus fittings are suitable for use with potable water, central heating and gas.

MacDonald Plumbing Supplies MacEndfeed Male Adaptor 22mm x 3/4 WRAS APPROVED & KITE MARKED (COPPER VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications, including central heating and hot & cold water supplies. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies meet BSEN1254 standard and are WRAS approved high quality products. Sizes range from 8mm to 54mm plus fittings are suitable for use with potable water, central heating and gas.

MacDonald Plumbing Supplies MacEndfeed 90 Degree Elbow 28mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Imperial Adaptor Coupling 28mm x 1 WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Reducing Coupling 10mm x 8mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Female Adaptor 15mm x 1/2 WRAS APPROVED & KITE MARKED (COPPER VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications, including central heating and hot & cold water supplies. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies meet BSEN1254 standard and are WRAS approved high quality products. Sizes range from 8mm to 54mm plus fittings are suitable for use with potable water, central heating and gas.

MacDonald Plumbing Supplies MacEndfeed Straight Tap Connector 15mm x 1/2 WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Coupling 35mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacSolder Ring Fitting Reducer 22mm x 15mm

Our Solder Ring fittings are manufactured with lead free solder and are suitable for use with potable water, central heating and gas. Solder Ring Fittings benefit from a pre-soldered ring that saves time when installing new pipework or repairing and old run.

MacDonald Plumbing Supplies MacEndfeed Bent Tap Connector 15mm x 1/2 WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed 45 Degree Street Obtuse Elbow 22mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Fitting Reducer 28mm x 15mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Reducing Coupling 28mm x 22mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed 90 Degree Street Elbow 22mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed 45 Degree Obtuse Elbow 15mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Imperial Adaptor Coupling 15mm x 1/2 WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Stop End 28mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Fitting Reducer 15mm x 8mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Equal Tee 22mm WRAS APPROVED

The MacEndfeed Equal Tee 22mm WRAS APPROVED is a durable copper fitting designed to create a branch connection within 22mm pipework in plumbing and heating systems. Compact and reliable, it provides a strong, permanent soldered joint, making it ideal for installations in both domestic and commercial environments. WRAS approved for potable water use, it ensures safe and consistent performance across a wide range of applications.

MacDonald Plumbing Supplies MacEndfeed Reducing Coupling 15mm x 12mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Female Adaptor 15mm x 1/4 WRAS APPROVED & KITE MARKED (COPPER VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications, including central heating and hot & cold water supplies. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies meet BSEN1254 standard and are WRAS approved high quality products. Sizes range from 8mm to 54mm plus fittings are suitable for use with potable water, central heating and gas.

MacDonald Plumbing Supplies MacEndfeed 45 Degree Street Obtuse Elbow 15mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Male Adaptor 15mm x 1/2 WRAS APPROVED & KITE MARKED (COPPER VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications, including central heating and hot & cold water supplies. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies meet BSEN1254 standard and are WRAS approved high quality products. Sizes range from 8mm to 54mm plus fittings are suitable for use with potable water, central heating and gas.

MacDonald Plumbing Supplies MacEndfeed 90 Degree Elbow 22mm WRAS APPROVED

The MacEndfeed 90 Degree Elbow 22mm WRAS APPROVED is a durable copper fitting designed to change the direction of 22mm pipework by 90 degrees in plumbing and heating systems. Compact and reliable, it provides a strong, permanent soldered joint, making it ideal for installations where space is limited. WRAS approved for potable water use, it ensures safe and dependable performance in domestic and commercial applications.

MacDonald Plumbing Supplies MacEndfeed Fitting Reducer 22mm x 15mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Reducing Coupling 15mm x 8mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Stop End 22mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Male Adaptor 15mm x 3/8 WRAS APPROVED & KITE MARKED (COPPER VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications, including central heating and hot & cold water supplies. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies meet BSEN1254 standard and are WRAS approved high quality products. Sizes range from 8mm to 54mm plus fittings are suitable for use with potable water, central heating and gas.

MacDonald Plumbing Supplies MacEndfeed Fitting Reducer 15mm x 10mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Coupling 28mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Imperial Adaptor Coupling 22mm x 3/4 WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Coupling 15mm WRAS APPROVED

The MacEndfeed Coupling 15mm WRAS APPROVED is a high-quality copper fitting designed for joining 15mm pipe in plumbing and heating systems. Compact and reliable, it provides a strong, permanent connection when soldered, making it ideal for use in tight spaces. WRAS approved for use with potable water, it offers dependable performance across a wide range of domestic and commercial applications.

MacDonald Plumbing Supplies MacEndfeed 90 Degree Elbow 15mm WRAS APPROVED

The MacEndfeed 90 Degree Elbow 15mm WRAS APPROVED is a high-quality copper fitting designed to change the direction of pipework by 90 degrees in plumbing and heating systems. Compact and durable, it provides a strong, permanent soldered joint, making it ideal for installations in confined spaces. WRAS approved for potable water use, it delivers safe and reliable performance across domestic and commercial applications.

MacDonald Plumbing Supplies MacEndfeed Coupling 22mm WRAS APPROVED

The MacEndfeed Coupling 22mm WRAS APPROVED is a high-quality copper fitting designed for joining 22mm pipe in plumbing and heating systems. Compact and reliable, it provides a strong, permanent connection when soldered, making it ideal for installations where space is limited. WRAS approved for use with potable water, it delivers dependable performance across a wide range of domestic and commercial applications.

MacDonald Plumbing Supplies MacEndfeed 90 Degree Street Elbow 15mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Stop End 15mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Equal Tee 15mm WRAS APPROVED

The MacEndfeed Equal Tee 15mm WRAS APPROVED is a high-quality copper fitting designed to create a branch connection within 15mm pipework in plumbing and heating systems. Compact and durable, it provides a strong, permanent soldered joint, making it ideal for use in confined spaces. WRAS approved for potable water applications, it delivers safe and reliable performance across domestic and commercial installations.

Speedfit 15mm x 10mm Reducer PEM061510W (Pack of 10)

The Speedfit 15mm x 10mm Reducer PEM061510W is a push-fit fitting designed to connect two Speedfit fittings of unequal sizes, reducing the line size effectively and securely. The reducer features a reduced spigot end, making it ideal for joining 15mm and 10mm pipes. It is quick and easy to install and demount without tools, offering a simple solution for reducing pipe sizes without the need for hot works or additional tools. WRAS approved, this fitting is perfect for both hot and cold water systems. Designed and manufactured in the UK with a 50-year guarantee.  

Speedfit 22mm x 15mm Reducer PEM062215W (Pack of 10)

The Speedfit 22mm x 15mm Reducer PEM062215W is designed to quickly and securely reduce pipe sizes from 22mm to 15mm. This push-fit fitting offers an easy installation process, with no tools required for fitting or removal. The reduced spigot end connects unequal sized pipes, making it ideal for plumbing applications where size reduction is necessary. It is flame-free and requires no hot works, glue, or flux, offering up to 40% faster installation than traditional methods. WRAS approved and designed for both hot and cold water and central heating systems, this fitting is manufactured in the UK and comes with a 50-year guarantee.  

Speedfit 28mm x 15mm Reducer PEM062815W (Pack of 5)

The Speedfit 28mm x 15mm Reducer PEM062815W offers a quick and secure solution to reduce the pipe size from 28mm to 15mm. Designed for both plastic and copper pipes, this push-fit fitting eliminates the need for hot works, glue, or flux, providing a faster, tool-free installation. Ideal for applications where a line size reduction is needed, the fitting’s Grip & Seal™ collet ensures a tight and secure connection. It is suitable for use with hot and cold water systems and central heating. Manufactured in the UK, it comes with a 50-year guarantee.  

Speedfit Unequal Straight Connector 15mm x 10mm PEM201510W (Pack Of 10)

The Speedfit 15 x 10mm Reducing Straight Coupler PEM201510W is a quick and reliable solution for connecting two unequal pipe sizes (15mm to 10mm). This push-fit fitting simplifies installation by eliminating the need for tools, hot works, or glue. Designed for both plastic and copper pipes, it ensures a secure and flame-free connection. The Grip & Seal™ collet and Twist & Lock® cap provide added security and compression. This fitting is WRAS approved, compatible with hot and cold water systems, and suitable for central heating. It is designed, manufactured, and assembled in the UK and comes with a 50-year guarantee.  

Speedfit Unequal Straight Connector 22mm x 15mm PEM202215W (Pack of 5)

The Speedfit 22 x 15mm Reducing Straight Coupler PEM202215W is designed to quickly and securely connect two unequal pipe sizes (22mm to 15mm). This push-fit fitting offers easy installation without the need for tools, hot works, or glue. It features a Grip & Seal™ collet with stainless steel teeth for a tight and secure fit. The Twist & Lock® cap ensures additional compression and stability. Suitable for both plastic and copper pipes, it is WRAS approved and ideal for hot and cold water systems, as well as central heating. This fitting is designed, manufactured, and assembled in the UK and comes with a 50-year guarantee.  

MacDonald Plumbing Supplies MacEndfeed Reducing Tee 22mm x 15mm x 15mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Reducing Tee 22mm x 15mm x 22mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Reducing Tee 22mm x 22mm x 15mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Reducing Tee 28mm x 15mm x 28mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Reducing Tee 28mm x 28mm x 15mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacValve 15mm & 22mm Pressure Reducing Valve & Gauge

The MacValve 15mm & 22mm Pressure Reducing Valve, complete with a pressure gauge, is designed to efficiently regulate and reduce pressure in plumbing and heating systems. With dual compatibility for 15mm and 22mm pipe sizes, this valve offers flexible installation and ensures system protection by controlling excessive water pressure. Adjustable outlet pressure between 1 and 6 bar with a factory pre-set of 3 bar.

MacDonald Plumbing Supplies MacValve 15mm WRAS Filling Loop Part L

The MacValve 15mm WRAS Filling Loop Part L is a reliable and compliant solution for refilling and maintaining pressure in domestic and commercial heating systems. Designed to meet Part L regulations and fully WRAS approved, it ensures safe operation while preventing backflow contamination. Suitable for use with boilers and other pressurised systems, this filling loop offers a straightforward and dependable method for topping up system pressure.