MacDonald Plumbing Supplies Dosing Funnel

The MacDonald Plumbing Supplies Dosing Funnel provides a fast, clean, and convenient method of introducing inhibitors, sludge removers, and other heating system treatment chemicals into a central heating system via a radiator. Supplied with a ½" BSP adaptor, it connects directly to the radiator, allowing chemicals to be poured into the system with minimal mess. It is an essential tool for heating engineers carrying out routine servicing and system maintenance.

Advantay 24Ltr Intermediate Vessel 1" x 1"

The Advantay 24Ltr Intermediate Vessel 1" x 1" is designed to increase and maintain the required water volume within air source heat pump systems. Featuring a straight-through inline design with 1" connections, this volumiser tank helps support efficient system operation in accordance with heat pump manufacturer requirements. Manufactured from durable carbon steel, it is suitable for a wide range of heating applications.

MacDonald Plumbing Supplies MacValve WRAS Remote Filling Loop Part L Compliant with Gauge

The MacValve WRAS Remote Filling Loop Part L Compliant with Gauge is a practical and compliant solution for filling and pressurising central heating systems and heat interface units. Designed for flexible installation, it can be fitted remotely from the boiler or cylinder, making it ideal where access is limited or no integral pressure gauge is present. Supplied complete with a gauge and essential safety components, it ensures accurate pressure monitoring and safe system operation.

Todays Tools Pit Bull Jet Klean Air Duster

The Todays Tools Pit Bull Jet Klean Air Duster is a powerful and versatile cleaning tool designed for removing dust and debris from a wide range of surfaces. With a high-speed 11,000 RPM motor and USB-C rechargeable functionality, it delivers strong, consistent airflow without the need for disposable air cans. Featuring a 2,000mAh battery, it offers reliable performance with extended usage time, making it ideal for workshops, electronics, and general maintenance tasks. Supplied with four attachments and a convenient storage case, it ensures efficient and organised cleaning on the go.

Todays Tools Screwdriver Bit Holder Carabiner Set CCBH

The Todays Tools Screwdriver Bit Holder Carabiner Set CCBH is a practical and convenient solution for keeping frequently used screwdriver bits organised and easily accessible. Designed for trade professionals and DIY users alike, this set allows you to securely store bits while attaching them to tool belts, bags, or workwear using the integrated carabiner clip. Ideal for on-site efficiency, it helps reduce time spent searching for loose bits and keeps essential accessories within easy reach throughout the working day.

Regin Braided Glass Yarn 6mm x 5mtr Black REGY17

The Regin Braided Glass Yarn 6mm x 5mtr Black REGY17 is a durable and flexible stove rope, designed for use in sealing and insulating stoves, fireplaces and other high-temperature applications. Made from high-quality braided glass yarn, it withstands heat and maintains its shape, providing a reliable seal that prevents air leaks and enhances efficiency. Supplied in a 5-metre pack, this black stove rope is ideal for maintenance, repair or new installations, offering a professional finish and long-lasting performance.

Regin Braided Glass Yarn 10mm x 5mtr Black REGY22

The Regin Braided Glass Yarn 10mm x 5mtr Black REGY22 is a robust and flexible stove rope, designed for sealing and insulating stoves, fireplaces, and other high-temperature applications. Made from premium braided glass yarn, it provides excellent heat resistance and maintains a secure seal, preventing air leaks and improving stove efficiency. Supplied in a 5-metre roll, this black stove rope is ideal for maintenance, repairs, or new installations, ensuring long-lasting performance and a professional finish.

Regin Braided Glass Yarn 12mm x 5mtr Black REGY24

The Regin Braided Glass Yarn 12mm x 5mtr Black REGY24 is a durable and flexible stove rope, designed for sealing and insulating stoves, fireplaces, and other high-temperature applications. Made from premium braided glass yarn, it offers excellent heat resistance and creates a reliable seal that prevents air leaks and improves efficiency. Supplied in a 5-metre roll, this black stove rope is ideal for maintenance, repairs, or new installations, providing long-lasting performance and a professional finish.

Todays Tools Large Drip Stopper Bung DSL

The Todays Tools Large Drip Stopper Bung DSL is a practical and effective accessory designed to temporarily seal pipes and stop unwanted drips during maintenance, repairs or system flushing. Suitable for a wide range of pipe diameters from 13 mm up to 42 mm, this drip stopper bung provides a secure seal that helps prevent water wastage and keeps work areas cleaner and safer. Easy to insert and remove, it is an essential tool for plumbers, heating engineers and maintenance professionals working on domestic and commercial systems.

Todays Tools Regular Drip Stopper Bung (Pack of Two) DSR

The Todays Tools Regular Drip Stopper Bung (Pack of Two) DSR is a practical and versatile solution for temporarily sealing small pipework during maintenance, repairs or flushing operations. Supplied as a pair, these drip stopper bungs are suitable for pipes with diameters between 5 mm and 22 mm, providing a tight and reliable seal to prevent unwanted drips and leaks. Lightweight and easy to use, they help reduce water wastage, protect work areas and make servicing tasks quicker and cleaner for plumbers, heating engineers and general tradespeople.

Drayton Pipe/Frost Thermostat Stat PTS1

The Drayton Pipe Frost Thermostat PTS1 is a dependable and easy to install solution for protecting heating systems, boilers and exposed pipework from frost damage. Designed for use as either a high or low limit thermostat, it is most commonly paired with the Drayton RTS3 Air Frost Thermostat to create an effective two stage frost protection system. The PTS1 features changeover contacts, a lockable anti tamper adjustment knob and a durable housing with a conduit adaptor for secure cable entry. Suitable for both domestic and commercial systems, it offers reliable performance and straightforward installation, ensuring essential frost protection whenever temperatures drop.   For more information, please follow the link here.  

McAlpine CARBON-CAR Replacement Carbon Cartridge for MACFILTER

The McAlpine CARBON-CAR Replacement Carbon Cartridge for MACFILTER is a genuine two-way activated carbon filter cartridge designed to maintain the performance and efficiency of McAlpine MACFILTER systems. Engineered for effective odour absorption and hygienic air control, this replacement cartridge helps keep waste systems fresh and operating efficiently in both domestic and commercial applications.

Todays Tools Pit Bull Funnel-it Flexible Draining Funnel

The Todays Tools Pit Bull Funnel-it is a flexible, high temperature resistant draining funnel designed for clean and efficient fluid transfer. Measuring 369x168x94mm, it bends and forms to create a leak-proof channel, making it ideal for draining and filling in garages, workshops, and industrial sites. Unlike makeshift solutions such as cut jugs or cardboard, this funnel is reusable, durable, and easy to clean with most common degreasers. Its resistance to high temperatures ensures reliable use with oils, lubricants, and hot fluids, preventing mess and accidental spillages while saving time.

ACR Instantor R-Press ⅝ 45 Degree Obtuse Bend PxP (Pack Of 3)

The R-Press ⅝ 45 Degree Obtuse Bend PxP (Pack Of 3) provides a fast, secure, and flame-free method of creating smooth directional changes in refrigeration and air conditioning pipework. Designed with a precision V-profile, it forms a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Manufactured from refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this bend offers long-lasting sealing performance and excellent corrosion resistance. Fully UL 207 certified and cULus listed, it meets stringent industry standards, ensuring safety and reliability in every installation. Suitable for operating pressures up to 48 bar and temperatures between -40°C and 140°C, it is the perfect choice for professional installers who demand both speed and quality.

ACR Instantor R-Press ¾ 45 Degree Obtuse Bend PxP (Pack Of 3)

The R-Press ¾ 45 Degree Obtuse Bend PxP (Pack Of 3) provides a fast, secure, and flame-free method of creating smooth directional changes in refrigeration and air conditioning pipework. Designed with a precision V-profile, it forms a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Manufactured from refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this bend offers long-lasting sealing performance and excellent corrosion resistance. Fully UL 207 certified and cULus listed, it meets stringent industry standards, ensuring safety and reliability in every installation. Suitable for operating pressures up to 48 bar and temperatures between -40°C and 140°C, it is the perfect choice for professional installers who demand both speed and quality.

ACR Instantor R-Press ⅞ 45 Degree Obtuse Bend PxP (Pack Of 3)

The R-Press ⅞ 45 Degree Obtuse Bend PxP (Pack Of 3) provides a fast, secure, and flame-free method of creating smooth directional changes in refrigeration and air conditioning pipework. Designed with a precision V-profile, it forms a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Manufactured from refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this bend offers long-lasting sealing performance and excellent corrosion resistance. Fully UL 207 certified and cULus listed, it meets stringent industry standards, ensuring safety and reliability in every installation. Suitable for operating pressures up to 48 bar and temperatures between -40°C and 140°C, it is the perfect choice for professional installers who demand both speed and quality.

ACR Instantor R-Press 1⅛ 45 Degree Obtuse Bend PxP (Pack Of 2)

The R-Press 1⅛ 45 Degree Obtuse Bend PxP (Pack Of 2) provides a fast, secure, and flame-free method of creating smooth directional changes in refrigeration and air conditioning pipework. Designed with a precision V-profile, it forms a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Manufactured from refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this bend offers long-lasting sealing performance and excellent corrosion resistance. Fully UL 207 certified and cULus listed, it meets stringent industry standards, ensuring safety and reliability in every installation. Suitable for operating pressures up to 48 bar and temperatures between -40°C and 140°C, it is the perfect choice for professional installers who demand both speed and quality.

ACR Instantor R-Press ¼ Stop End PxCAP (Pack Of 3)

The R-Press ¼ Stop End PxCAP (Pack Of 3) provides a reliable, flame-free solution for capping copper pipework in refrigeration and air conditioning systems. Designed with a V-profile for precise mechanical joint connections, it creates a secure seal without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-quality refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this stop end ensures long-lasting leak-free performance. Suitable for operating temperatures from -40°C to 140°C and pressures up to 48 bar, it is UL 207 certified, meeting stringent industry safety and quality standards.

ACR Instantor R-Press ⅜ Stop End PxCAP (Pack Of 3)

The R-Press ⅜ Stop End PxCAP (Pack Of 3) provides a reliable, flame-free solution for capping copper pipework in refrigeration and air conditioning systems. Designed with a V-profile for precise mechanical joint connections, it creates a secure seal without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-quality refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this stop end ensures long-lasting leak-free performance. Suitable for operating temperatures from -40°C to 140°C and pressures up to 48 bar, it is UL 207 certified, meeting stringent industry safety and quality standards.

ACR Instantor R-Press ½ Stop End PxCAP (Pack Of 3)

The R-Press ½ Stop End PxCAP (Pack Of 3) provides a reliable, flame-free solution for capping copper pipework in refrigeration and air conditioning systems. Designed with a V-profile for precise mechanical joint connections, it creates a secure seal without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-quality refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this stop end ensures long-lasting leak-free performance. Suitable for operating temperatures from -40°C to 140°C and pressures up to 48 bar, it is UL 207 certified, meeting stringent industry safety and quality standards.

ACR Instantor R-Press ⅝ Stop End PxCAP (Pack Of 2)

The R-Press ⅝ Stop End PxCAP (Pack Of 2) provides a reliable, flame-free solution for capping copper pipework in refrigeration and air conditioning systems. Designed with a V-profile for precise mechanical joint connections, it creates a secure seal without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-quality refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this stop end ensures long-lasting leak-free performance. Suitable for operating temperatures from -40°C to 140°C and pressures up to 48 bar, it is UL 207 certified, meeting stringent industry safety and quality standards.

ACR Instantor R-Press ¾ Stop End PxCAP (Pack Of 2)

The R-Press ¾ Stop End PxCAP (Pack Of 2) provides a reliable, flame-free solution for capping copper pipework in refrigeration and air conditioning systems. Designed with a V-profile for precise mechanical joint connections, it creates a secure seal without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-quality refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this stop end ensures long-lasting leak-free performance. Suitable for operating temperatures from -40°C to 140°C and pressures up to 48 bar, it is UL 207 certified, meeting stringent industry safety and quality standards.

ACR Instantor R-Press ⅞ Stop End PxCAP (Pack Of 2)

The R-Press ⅞ Stop End PxCAP (Pack Of 2) provides a reliable, flame-free solution for capping copper pipework in refrigeration and air conditioning systems. Designed with a V-profile for precise mechanical joint connections, it creates a secure seal without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-quality refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this stop end ensures long-lasting leak-free performance. Suitable for operating temperatures from -40°C to 140°C and pressures up to 48 bar, it is UL 207 certified, meeting stringent industry safety and quality standards.

ACR Instantor R-Press 1⅛ Stop End PxCAP (Pack Of 1)

The R-Press 1⅛ Stop End PxCAP (Pack Of 1) provides a reliable, flame-free solution for capping copper pipework in refrigeration and air conditioning systems. Designed with a V-profile for precise mechanical joint connections, it creates a secure seal without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-quality refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this stop end ensures long-lasting leak-free performance. Suitable for operating temperatures from -40°C to 140°C and pressures up to 48 bar, it is UL 207 certified, meeting stringent industry safety and quality standards.

ACR Instantor R-Press 1⅛ x ⅞ Reducing Coupler PxP (Pack Of 1)

The R-Press 1⅛ x ⅞ Reducing Coupler PxP (Pack Of 1) provides a fast, flame-free, and dependable solution for connecting copper pipes of different sizes in refrigeration and air conditioning systems. Its precision V-profile design creates a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-grade refrigerant copper (UNS C12200) and featuring a robust HNBR O-ring, it ensures long-lasting sealing performance and resistance to corrosion. UL 207 certified and cULus listed, it complies with strict industry safety standards. Designed for pressures up to 48 bar and temperatures between -40°C and 140°C, it is ideal for professional installers who prioritise safety, efficiency, and reliability.

ACR Instantor R-Press ¼ 90 Degree Street Elbow FTGxP (Pack Of 3)

The R-Press ¼ 90 Degree Street Elbow FTGxP (Pack Of 3) offers a secure, flame-free, and time-efficient solution for changing pipe direction in refrigeration and air conditioning installations. Designed with a male (FTG) end and a press (P) connection, it allows a compact 90-degree change in direction while maintaining system integrity. Manufactured from refrigerant grade copper (UNS C12200) with a robust HNBR O-ring, it delivers exceptional sealing performance and durability. UL 207 certified and cULus listed, it meets stringent safety standards. Capable of operating from -40°C to 140°C and withstanding pressures up to 48 bar, it is perfect for professional installers seeking a fast, safe, and reliable fitting solution.

ACR Instantor R-Press ⅜ 90 Degree Street Elbow FTGxP (Pack Of 3)

The R-Press ⅜ 90 Degree Street Elbow FTGxP (Pack Of 3) offers a secure, flame-free, and time-efficient solution for changing pipe direction in refrigeration and air conditioning installations. Designed with a male (FTG) end and a press (P) connection, it allows a compact 90-degree change in direction while maintaining system integrity. Manufactured from refrigerant grade copper (UNS C12200) with a robust HNBR O-ring, it delivers exceptional sealing performance and durability. UL 207 certified and cULus listed, it meets stringent safety standards. Capable of operating from -40°C to 140°C and withstanding pressures up to 48 bar, it is perfect for professional installers seeking a fast, safe, and reliable fitting solution.

ACR Instantor R-Press ½ 90 Degree Street Elbow FTGxP (Pack Of 3)

The R-Press ½ 90 Degree Street Elbow FTGxP (Pack Of 3) offers a secure, flame-free, and time-efficient solution for changing pipe direction in refrigeration and air conditioning installations. Designed with a male (FTG) end and a press (P) connection, it allows a compact 90-degree change in direction while maintaining system integrity. Manufactured from refrigerant grade copper (UNS C12200) with a robust HNBR O-ring, it delivers exceptional sealing performance and durability. UL 207 certified and cULus listed, it meets stringent safety standards. Capable of operating from -40°C to 140°C and withstanding pressures up to 48 bar, it is perfect for professional installers seeking a fast, safe, and reliable fitting solution.

ACR Instantor R-Press ⅝ 90 Degree Street Elbow FTGxP (Pack Of 3)

The R-Press ⅝ 90 Degree Street Elbow FTGxP (Pack Of 3) offers a secure, flame-free, and time-efficient solution for changing pipe direction in refrigeration and air conditioning installations. Designed with a male (FTG) end and a press (P) connection, it allows a compact 90-degree change in direction while maintaining system integrity. Manufactured from refrigerant grade copper (UNS C12200) with a robust HNBR O-ring, it delivers exceptional sealing performance and durability. UL 207 certified and cULus listed, it meets stringent safety standards. Capable of operating from -40°C to 140°C and withstanding pressures up to 48 bar, it is perfect for professional installers seeking a fast, safe, and reliable fitting solution.

ACR Instantor R-Press ¾ 90 Degree Street Elbow FTGxP (Pack Of 3)

The R-Press ¾ 90 Degree Street Elbow FTGxP (Pack Of 3) offers a secure, flame-free, and time-efficient solution for changing pipe direction in refrigeration and air conditioning installations. Designed with a male (FTG) end and a press (P) connection, it allows a compact 90-degree change in direction while maintaining system integrity. Manufactured from refrigerant grade copper (UNS C12200) with a robust HNBR O-ring, it delivers exceptional sealing performance and durability. UL 207 certified and cULus listed, it meets stringent safety standards. Capable of operating from -40°C to 140°C and withstanding pressures up to 48 bar, it is perfect for professional installers seeking a fast, safe, and reliable fitting solution.

ACR Instantor R-Press ⅞ 90 Degree Street Elbow FTGxP (Pack Of 3)

The R-Press ⅞ 90 Degree Street Elbow FTGxP (Pack Of 3) offers a secure, flame-free, and time-efficient solution for changing pipe direction in refrigeration and air conditioning installations. Designed with a male (FTG) end and a press (P) connection, it allows a compact 90-degree change in direction while maintaining system integrity. Manufactured from refrigerant grade copper (UNS C12200) with a robust HNBR O-ring, it delivers exceptional sealing performance and durability. UL 207 certified and cULus listed, it meets stringent safety standards. Capable of operating from -40°C to 140°C and withstanding pressures up to 48 bar, it is perfect for professional installers seeking a fast, safe, and reliable fitting solution.

ACR Instantor R-Press 1⅛ 90 Degree Street Elbow FTGxP (Pack Of 2)

The R-Press 1⅛ 90 Degree Street Elbow FTGxP (Pack Of 2) offers a secure, flame-free, and time-efficient solution for changing pipe direction in refrigeration and air conditioning installations. Designed with a male (FTG) end and a press (P) connection, it allows a compact 90-degree change in direction while maintaining system integrity. Manufactured from refrigerant grade copper (UNS C12200) with a robust HNBR O-ring, it delivers exceptional sealing performance and durability. UL 207 certified and cULus listed, it meets stringent safety standards. Capable of operating from -40°C to 140°C and withstanding pressures up to 48 bar, it is perfect for professional installers seeking a fast, safe, and reliable fitting solution.

ACR Instantor R-Press ¼ 45 Degree Obtuse Bend PxP (Pack Of 3)

The R-Press ¼ 45 Degree Obtuse Bend PxP (Pack Of 3) provides a fast, secure, and flame-free method of creating smooth directional changes in refrigeration and air conditioning pipework. Designed with a precision V-profile, it forms a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Manufactured from refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this bend offers long-lasting sealing performance and excellent corrosion resistance. Fully UL 207 certified and cULus listed, it meets stringent industry standards, ensuring safety and reliability in every installation. Suitable for operating pressures up to 48 bar and temperatures between -40°C and 140°C, it is the perfect choice for professional installers who demand both speed and quality.

ACR Instantor R-Press ⅜ 45 Degree Obtuse Bend PxP (Pack Of 3)

The R-Press ⅜ 45 Degree Obtuse Bend PxP (Pack Of 3) provides a fast, secure, and flame-free method of creating smooth directional changes in refrigeration and air conditioning pipework. Designed with a precision V-profile, it forms a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Manufactured from refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this bend offers long-lasting sealing performance and excellent corrosion resistance. Fully UL 207 certified and cULus listed, it meets stringent industry standards, ensuring safety and reliability in every installation. Suitable for operating pressures up to 48 bar and temperatures between -40°C and 140°C, it is the perfect choice for professional installers who demand both speed and quality.

ACR Instantor R-Press ½ 45 Degree Obtuse Bend PxP (Pack Of 3)

The R-Press ½ 45 Degree Obtuse Bend PxP (Pack Of 3) provides a fast, secure, and flame-free method of creating smooth directional changes in refrigeration and air conditioning pipework. Designed with a precision V-profile, it forms a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Manufactured from refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this bend offers long-lasting sealing performance and excellent corrosion resistance. Fully UL 207 certified and cULus listed, it meets stringent industry standards, ensuring safety and reliability in every installation. Suitable for operating pressures up to 48 bar and temperatures between -40°C and 140°C, it is the perfect choice for professional installers who demand both speed and quality.

ACR Instantor R-Press ½ x ¼ Reducing Coupler PxP (Pack Of 2)

The R-Press ½ x ¼ Reducing Coupler PxP (Pack Of 2) provides a fast, flame-free, and dependable solution for connecting copper pipes of different sizes in refrigeration and air conditioning systems. Its precision V-profile design creates a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-grade refrigerant copper (UNS C12200) and featuring a robust HNBR O-ring, it ensures long-lasting sealing performance and resistance to corrosion. UL 207 certified and cULus listed, it complies with strict industry safety standards. Designed for pressures up to 48 bar and temperatures between -40°C and 140°C, it is ideal for professional installers who prioritise safety, efficiency, and reliability.

ACR Instantor R-Press ½ x ⅜ Reducing Coupler PxP (Pack Of 2)

The R-Press ½ x ⅜ Reducing Coupler PxP (Pack Of 2) provides a fast, flame-free, and dependable solution for connecting copper pipes of different sizes in refrigeration and air conditioning systems. Its precision V-profile design creates a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-grade refrigerant copper (UNS C12200) and featuring a robust HNBR O-ring, it ensures long-lasting sealing performance and resistance to corrosion. UL 207 certified and cULus listed, it complies with strict industry safety standards. Designed for pressures up to 48 bar and temperatures between -40°C and 140°C, it is ideal for professional installers who prioritise safety, efficiency, and reliability.

ACR Instantor R-Press ⅝ x ¼ Reducing Coupler PxP (Pack Of 2)

The R-Press ⅝ x ¼ Reducing Coupler PxP (Pack Of 2) provides a fast, flame-free, and dependable solution for connecting copper pipes of different sizes in refrigeration and air conditioning systems. Its precision V-profile design creates a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-grade refrigerant copper (UNS C12200) and featuring a robust HNBR O-ring, it ensures long-lasting sealing performance and resistance to corrosion. UL 207 certified and cULus listed, it complies with strict industry safety standards. Designed for pressures up to 48 bar and temperatures between -40°C and 140°C, it is ideal for professional installers who prioritise safety, efficiency, and reliability.

ACR Instantor R-Press ⅝ x ⅜ Reducing Coupler PxP (Pack Of 2)

The R-Press ⅝ x ⅜ Reducing Coupler PxP (Pack Of 2) provides a fast, flame-free, and dependable solution for connecting copper pipes of different sizes in refrigeration and air conditioning systems. Its precision V-profile design creates a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-grade refrigerant copper (UNS C12200) and featuring a robust HNBR O-ring, it ensures long-lasting sealing performance and resistance to corrosion. UL 207 certified and cULus listed, it complies with strict industry safety standards. Designed for pressures up to 48 bar and temperatures between -40°C and 140°C, it is ideal for professional installers who prioritise safety, efficiency, and reliability.

ACR Instantor R-Press ⅝ x ½ Reducing Coupler PxP (Pack Of 2)

The R-Press ⅝ x ½ Reducing Coupler PxP (Pack Of 2) provides a fast, flame-free, and dependable solution for connecting copper pipes of different sizes in refrigeration and air conditioning systems. Its precision V-profile design creates a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-grade refrigerant copper (UNS C12200) and featuring a robust HNBR O-ring, it ensures long-lasting sealing performance and resistance to corrosion. UL 207 certified and cULus listed, it complies with strict industry safety standards. Designed for pressures up to 48 bar and temperatures between -40°C and 140°C, it is ideal for professional installers who prioritise safety, efficiency, and reliability.

ACR Instantor R-Press ¾ x ½ Reducing Coupler PxP (Pack Of 2)

The R-Press ¾ x ½ Reducing Coupler PxP (Pack Of 2) provides a fast, flame-free, and dependable solution for connecting copper pipes of different sizes in refrigeration and air conditioning systems. Its precision V-profile design creates a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-grade refrigerant copper (UNS C12200) and featuring a robust HNBR O-ring, it ensures long-lasting sealing performance and resistance to corrosion. UL 207 certified and cULus listed, it complies with strict industry safety standards. Designed for pressures up to 48 bar and temperatures between -40°C and 140°C, it is ideal for professional installers who prioritise safety, efficiency, and reliability.

ACR Instantor R-Press ¾ x ⅝ Reducing Coupler PxP (Pack Of 2)

The R-Press ¾ x ⅝ Reducing Coupler PxP (Pack Of 2) provides a fast, flame-free, and dependable solution for connecting copper pipes of different sizes in refrigeration and air conditioning systems. Its precision V-profile design creates a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-grade refrigerant copper (UNS C12200) and featuring a robust HNBR O-ring, it ensures long-lasting sealing performance and resistance to corrosion. UL 207 certified and cULus listed, it complies with strict industry safety standards. Designed for pressures up to 48 bar and temperatures between -40°C and 140°C, it is ideal for professional installers who prioritise safety, efficiency, and reliability.

ACR Instantor R-Press ⅞ x ½ Reducing Coupler PxP (Pack Of 2)

The R-Press ⅞ x ½ Reducing Coupler PxP (Pack Of 2) provides a fast, flame-free, and dependable solution for connecting copper pipes of different sizes in refrigeration and air conditioning systems. Its precision V-profile design creates a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-grade refrigerant copper (UNS C12200) and featuring a robust HNBR O-ring, it ensures long-lasting sealing performance and resistance to corrosion. UL 207 certified and cULus listed, it complies with strict industry safety standards. Designed for pressures up to 48 bar and temperatures between -40°C and 140°C, it is ideal for professional installers who prioritise safety, efficiency, and reliability.

ACR Instantor R-Press ⅞ x ⅝ Reducing Coupler PxP (Pack Of 2)

The R-Press ⅞ x ⅝ Reducing Coupler PxP (Pack Of 2) provides a fast, flame-free, and dependable solution for connecting copper pipes of different sizes in refrigeration and air conditioning systems. Its precision V-profile design creates a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-grade refrigerant copper (UNS C12200) and featuring a robust HNBR O-ring, it ensures long-lasting sealing performance and resistance to corrosion. UL 207 certified and cULus listed, it complies with strict industry safety standards. Designed for pressures up to 48 bar and temperatures between -40°C and 140°C, it is ideal for professional installers who prioritise safety, efficiency, and reliability.

ACR Instantor R-Press ⅞ x ¾ Reducing Coupler PxP (Pack Of 2)

The R-Press ⅞ x ¾ Reducing Coupler PxP (Pack Of 2) provides a fast, flame-free, and dependable solution for connecting copper pipes of different sizes in refrigeration and air conditioning systems. Its precision V-profile design creates a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-grade refrigerant copper (UNS C12200) and featuring a robust HNBR O-ring, it ensures long-lasting sealing performance and resistance to corrosion. UL 207 certified and cULus listed, it complies with strict industry safety standards. Designed for pressures up to 48 bar and temperatures between -40°C and 140°C, it is ideal for professional installers who prioritise safety, efficiency, and reliability.

ACR Instantor R-Press 1⅛ x ⅝ Reducing Coupler PxP (Pack Of 1)

The R-Press 1⅛ x ⅝ Reducing Coupler PxP (Pack Of 1) provides a fast, flame-free, and dependable solution for connecting copper pipes of different sizes in refrigeration and air conditioning systems. Its precision V-profile design creates a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-grade refrigerant copper (UNS C12200) and featuring a robust HNBR O-ring, it ensures long-lasting sealing performance and resistance to corrosion. UL 207 certified and cULus listed, it complies with strict industry safety standards. Designed for pressures up to 48 bar and temperatures between -40°C and 140°C, it is ideal for professional installers who prioritise safety, efficiency, and reliability.

ACR Instantor R-Press 1⅛ x ¾ Reducing Coupler PxP (Pack Of 1)

The R-Press 1⅛ x ¾ Reducing Coupler PxP (Pack Of 1) provides a fast, flame-free, and dependable solution for connecting copper pipes of different sizes in refrigeration and air conditioning systems. Its precision V-profile design creates a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-grade refrigerant copper (UNS C12200) and featuring a robust HNBR O-ring, it ensures long-lasting sealing performance and resistance to corrosion. UL 207 certified and cULus listed, it complies with strict industry safety standards. Designed for pressures up to 48 bar and temperatures between -40°C and 140°C, it is ideal for professional installers who prioritise safety, efficiency, and reliability.

ACR Instantor R-Press ⅝ 90 Degree Elbow PxP (Pack Of 3)

The R-Press ⅝ 90 Degree Elbow PxP (Pack Of 3) provides a secure, flame-free, and efficient way to create tight 90-degree bends in refrigeration and air conditioning pipework. Designed with a precision V-profile, it ensures a strong mechanical joint without the need for brazing or nitrogen purging. Manufactured from refrigerant grade copper (UNS C12200) and fitted with a robust HNBR O-ring, this elbow offers excellent sealing performance and durability. UL 207 certified and cULus listed, it meets strict industry standards for safety and reliability. Capable of withstanding pressures up to 48 bar and operating temperatures between -40°C and 140°C, it is ideal for installers seeking a faster, safer alternative to traditional methods.

ACR Instantor R-Press ¾ 90 Degree Elbow PxP (Pack Of 3)

The R-Press ¾ 90 Degree Elbow PxP (Pack Of 3) provides a secure, flame-free, and efficient way to create tight 90-degree bends in refrigeration and air conditioning pipework. Designed with a precision V-profile, it ensures a strong mechanical joint without the need for brazing or nitrogen purging. Manufactured from refrigerant grade copper (UNS C12200) and fitted with a robust HNBR O-ring, this elbow offers excellent sealing performance and durability. UL 207 certified and cULus listed, it meets strict industry standards for safety and reliability. Capable of withstanding pressures up to 48 bar and operating temperatures between -40°C and 140°C, it is ideal for installers seeking a faster, safer alternative to traditional methods.

ACR Instantor R-Press ⅞ 90 Degree Elbow PxP (Pack Of 3)

The R-Press ⅞ 90 Degree Elbow PxP (Pack Of 3) provides a secure, flame-free, and efficient way to create tight 90-degree bends in refrigeration and air conditioning pipework. Designed with a precision V-profile, it ensures a strong mechanical joint without the need for brazing or nitrogen purging. Manufactured from refrigerant grade copper (UNS C12200) and fitted with a robust HNBR O-ring, this elbow offers excellent sealing performance and durability. UL 207 certified and cULus listed, it meets strict industry standards for safety and reliability. Capable of withstanding pressures up to 48 bar and operating temperatures between -40°C and 140°C, it is ideal for installers seeking a faster, safer alternative to traditional methods.

ACR Instantor R-Press 1⅛ 90 Degree Elbow PxP (Pack Of 2)

The R-Press 1⅛ 90 Degree Elbow PxP (Pack Of 2) provides a secure, flame-free, and efficient way to create tight 90-degree bends in refrigeration and air conditioning pipework. Designed with a precision V-profile, it ensures a strong mechanical joint without the need for brazing or nitrogen purging. Manufactured from refrigerant grade copper (UNS C12200) and fitted with a robust HNBR O-ring, this elbow offers excellent sealing performance and durability. UL 207 certified and cULus listed, it meets strict industry standards for safety and reliability. Capable of withstanding pressures up to 48 bar and operating temperatures between -40°C and 140°C, it is ideal for installers seeking a faster, safer alternative to traditional methods.

ACR Instantor R-Press ¼ Tee PxPxP (Pack Of 3)

The R-Press ¼ Tee PxPxP (Pack Of 3) is designed for creating reliable three-way copper connections in refrigeration and air conditioning systems. Manufactured from refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this tee offers long-lasting sealing performance and exceptional corrosion resistance. Its V-profile design ensures a precise mechanical joint without the need for brazing or nitrogen purging, reducing both installation time and on-site hazards. UL 207 certified and cULus listed, it meets stringent safety and quality standards. Suitable for operating pressures up to 48 bar and temperatures from -40°C to 140°C, it is the ideal choice for installers seeking fast, safe, and professional results.

ACR Instantor R-Press ⅜ Tee PxPxP (Pack Of 3)

The R-Press ⅜ Tee PxPxP (Pack Of 3) is designed for creating reliable three-way copper connections in refrigeration and air conditioning systems. Manufactured from refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this tee offers long-lasting sealing performance and exceptional corrosion resistance. Its V-profile design ensures a precise mechanical joint without the need for brazing or nitrogen purging, reducing both installation time and on-site hazards. UL 207 certified and cULus listed, it meets stringent safety and quality standards. Suitable for operating pressures up to 48 bar and temperatures from -40°C to 140°C, it is the ideal choice for installers seeking fast, safe, and professional results.

ACR Instantor R-Press ½ Tee PxPxP (Pack Of 3)

The R-Press ½ Tee PxPxP (Pack Of 3) is designed for creating reliable three-way copper connections in refrigeration and air conditioning systems. Manufactured from refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this tee offers long-lasting sealing performance and exceptional corrosion resistance. Its V-profile design ensures a precise mechanical joint without the need for brazing or nitrogen purging, reducing both installation time and on-site hazards. UL 207 certified and cULus listed, it meets stringent safety and quality standards. Suitable for operating pressures up to 48 bar and temperatures from -40°C to 140°C, it is the ideal choice for installers seeking fast, safe, and professional results.

ACR Instantor R-Press ⅝ Tee PxPxP (Pack Of 2)

The R-Press ⅝ Tee PxPxP (Pack Of 2) is designed for creating reliable three-way copper connections in refrigeration and air conditioning systems. Manufactured from refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this tee offers long-lasting sealing performance and exceptional corrosion resistance. Its V-profile design ensures a precise mechanical joint without the need for brazing or nitrogen purging, reducing both installation time and on-site hazards. UL 207 certified and cULus listed, it meets stringent safety and quality standards. Suitable for operating pressures up to 48 bar and temperatures from -40°C to 140°C, it is the ideal choice for installers seeking fast, safe, and professional results.

ACR Instantor R-Press ¾ Tee PxPxP (Pack Of 2)

The R-Press ¾ Tee PxPxP (Pack Of 2) is designed for creating reliable three-way copper connections in refrigeration and air conditioning systems. Manufactured from refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this tee offers long-lasting sealing performance and exceptional corrosion resistance. Its V-profile design ensures a precise mechanical joint without the need for brazing or nitrogen purging, reducing both installation time and on-site hazards. UL 207 certified and cULus listed, it meets stringent safety and quality standards. Suitable for operating pressures up to 48 bar and temperatures from -40°C to 140°C, it is the ideal choice for installers seeking fast, safe, and professional results.

ACR Instantor R-Press ⅞ Tee PxPxP (Pack Of 2)

The R-Press ⅞ Tee PxPxP (Pack Of 2) is designed for creating reliable three-way copper connections in refrigeration and air conditioning systems. Manufactured from refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this tee offers long-lasting sealing performance and exceptional corrosion resistance. Its V-profile design ensures a precise mechanical joint without the need for brazing or nitrogen purging, reducing both installation time and on-site hazards. UL 207 certified and cULus listed, it meets stringent safety and quality standards. Suitable for operating pressures up to 48 bar and temperatures from -40°C to 140°C, it is the ideal choice for installers seeking fast, safe, and professional results.

ACR Instantor R-Press 1⅛ Tee PxPxP (Pack Of 1)

The R-Press 1⅛ Tee PxPxP (Pack Of 1) is designed for creating reliable three-way copper connections in refrigeration and air conditioning systems. Manufactured from refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this tee offers long-lasting sealing performance and exceptional corrosion resistance. Its V-profile design ensures a precise mechanical joint without the need for brazing or nitrogen purging, reducing both installation time and on-site hazards. UL 207 certified and cULus listed, it meets stringent safety and quality standards. Suitable for operating pressures up to 48 bar and temperatures from -40°C to 140°C, it is the ideal choice for installers seeking fast, safe, and professional results.

ACR Instantor R-Press ⅜ x ¼ Reducing Coupler PxP (Pack Of 2)

The R-Press ⅜ x ¼ Reducing Coupler PxP (Pack Of 2) provides a fast, flame-free, and dependable solution for connecting copper pipes of different sizes in refrigeration and air conditioning systems. Its precision V-profile design creates a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-grade refrigerant copper (UNS C12200) and featuring a robust HNBR O-ring, it ensures long-lasting sealing performance and resistance to corrosion. UL 207 certified and cULus listed, it complies with strict industry safety standards. Designed for pressures up to 48 bar and temperatures between -40°C and 140°C, it is ideal for professional installers who prioritise safety, efficiency, and reliability.

ACR Instantor R-Press ½ Straight Coupler PxP (Pack Of 5)

The R-Press ½ Straight Coupler PxP (Pack Of 5) delivers a professional, secure, and flame-free connection for refrigeration and air conditioning installations. Made from high-quality refrigerant grade copper (UNS C12200) with a robust HNBR O-ring seal, this straight coupler offers excellent durability and leak resistance under demanding operating conditions. With its UL 207 certification and cULus listing, it meets strict safety and quality standards. Designed for mechanical joint installation, it eliminates the need for nitrogen purging or hot works, reducing on-site risks. Suitable for use in systems operating between -40°C and 140°C, this coupler can withstand pressures of up to 48 bar, making it a trusted choice for installers seeking speed, safety, and reliability.

ACR Instantor R-Press ⅝ Straight Coupler PxP (Pack Of 5)

The R-Press ⅝ Straight Coupler PxP (Pack Of 5) delivers a professional, secure, and flame-free connection for refrigeration and air conditioning installations. Made from high-quality refrigerant grade copper (UNS C12200) with a robust HNBR O-ring seal, this straight coupler offers excellent durability and leak resistance under demanding operating conditions. With its UL 207 certification and cULus listing, it meets strict safety and quality standards. Designed for mechanical joint installation, it eliminates the need for nitrogen purging or hot works, reducing on-site risks. Suitable for use in systems operating between -40°C and 140°C, this coupler can withstand pressures of up to 48 bar, making it a trusted choice for installers seeking speed, safety, and reliability.

ACR Instantor R-Press ¾ Straight Coupler PxP (Pack Of 2)

The R-Press ¾ Straight Coupler PxP (Pack Of 2) delivers a professional, secure, and flame-free connection for refrigeration and air conditioning installations. Made from high-quality refrigerant grade copper (UNS C12200) with a robust HNBR O-ring seal, this straight coupler offers excellent durability and leak resistance under demanding operating conditions. With its UL 207 certification and cULus listing, it meets strict safety and quality standards. Designed for mechanical joint installation, it eliminates the need for nitrogen purging or hot works, reducing on-site risks. Suitable for use in systems operating between -40°C and 140°C, this coupler can withstand pressures of up to 48 bar, making it a trusted choice for installers seeking speed, safety, and reliability.

ACR Instantor R-Press ⅞ Straight Coupler PxP (Pack Of 2)

The R-Press ⅞ Straight Coupler PxP (Pack Of 2) delivers a professional, secure, and flame-free connection for refrigeration and air conditioning installations. Made from high-quality refrigerant grade copper (UNS C12200) with a robust HNBR O-ring seal, this straight coupler offers excellent durability and leak resistance under demanding operating conditions. With its UL 207 certification and cULus listing, it meets strict safety and quality standards. Designed for mechanical joint installation, it eliminates the need for nitrogen purging or hot works, reducing on-site risks. Suitable for use in systems operating between -40°C and 140°C, this coupler can withstand pressures of up to 48 bar, making it a trusted choice for installers seeking speed, safety, and reliability.

ACR Instantor R-Press 1⅛ Straight Coupler PxP (Pack Of 2)

The R-Press 1⅛ Straight Coupler PxP (Pack Of 2) delivers a professional, secure, and flame-free connection for refrigeration and air conditioning installations. Made from high-quality refrigerant grade copper (UNS C12200) with a robust HNBR O-ring seal, this straight coupler offers excellent durability and leak resistance under demanding operating conditions. With its UL 207 certification and cULus listing, it meets strict safety and quality standards. Designed for mechanical joint installation, it eliminates the need for nitrogen purging or hot works, reducing on-site risks. Suitable for use in systems operating between -40°C and 140°C, this coupler can withstand pressures of up to 48 bar, making it a trusted choice for installers seeking speed, safety, and reliability.

ACR Instantor R-Press ¼ Straight Swivel Union PxFPT (Pack Of 4)

The R-Press ¼ Straight Swivel Union PxFPT (Pack Of 4) offers a secure, flame-free, and time-saving solution for refrigeration and air conditioning connections. Designed with a V-profile for precision and reliability, this swivel union allows a copper-to-female pipe thread connection without the need for hot works. Manufactured from refrigerant grade copper (UNS C12200) and equipped with a durable HNBR O-ring, it ensures excellent sealing performance under demanding conditions. UL 207 certified and cULus listed, it meets strict quality and safety standards. Suitable for temperatures from -40°C to 140°C and pressures up to 48 bar, it’s ideal for professional installers looking to save up to 35% installation time compared to brazing methods.

ACR Instantor R-Press ⅜ Straight Swivel Union PxFPT (Pack Of 4)

The R-Press ⅜ Straight Swivel Union PxFPT (Pack Of 4) offers a secure, flame-free, and time-saving solution for refrigeration and air conditioning connections. Designed with a V-profile for precision and reliability, this swivel union allows a copper-to-female pipe thread connection without the need for hot works. Manufactured from refrigerant grade copper (UNS C12200) and equipped with a durable HNBR O-ring, it ensures excellent sealing performance under demanding conditions. UL 207 certified and cULus listed, it meets strict quality and safety standards. Suitable for temperatures from -40°C to 140°C and pressures up to 48 bar, it’s ideal for professional installers looking to save up to 35% installation time compared to brazing methods.

ACR Instantor R-Press ½ Straight Swivel Union PxFPT (Pack Of 2)

The R-Press ½ Straight Swivel Union PxFPT (Pack Of 2) offers a secure, flame-free, and time-saving solution for refrigeration and air conditioning connections. Designed with a V-profile for precision and reliability, this swivel union allows a copper-to-female pipe thread connection without the need for hot works. Manufactured from refrigerant grade copper (UNS C12200) and equipped with a durable HNBR O-ring, it ensures excellent sealing performance under demanding conditions. UL 207 certified and cULus listed, it meets strict quality and safety standards. Suitable for temperatures from -40°C to 140°C and pressures up to 48 bar, it’s ideal for professional installers looking to save up to 35% installation time compared to brazing methods.

ACR Instantor R-Press ⅝ Straight Swivel Union PxFPT (Pack Of 2)

The R-Press ⅝ Straight Swivel Union PxFPT (Pack Of 2) offers a secure, flame-free, and time-saving solution for refrigeration and air conditioning connections. Designed with a V-profile for precision and reliability, this swivel union allows a copper-to-female pipe thread connection without the need for hot works. Manufactured from refrigerant grade copper (UNS C12200) and equipped with a durable HNBR O-ring, it ensures excellent sealing performance under demanding conditions. UL 207 certified and cULus listed, it meets strict quality and safety standards. Suitable for temperatures from -40°C to 140°C and pressures up to 48 bar, it’s ideal for professional installers looking to save up to 35% installation time compared to brazing methods.

ACR Instantor R-Press ¾ Straight Swivel Union PxFPT (Pack Of 2)

The R-Press ¾ Straight Swivel Union PxFPT (Pack Of 2) offers a secure, flame-free, and time-saving solution for refrigeration and air conditioning connections. Designed with a V-profile for precision and reliability, this swivel union allows a copper-to-female pipe thread connection without the need for hot works. Manufactured from refrigerant grade copper (UNS C12200) and equipped with a durable HNBR O-ring, it ensures excellent sealing performance under demanding conditions. UL 207 certified and cULus listed, it meets strict quality and safety standards. Suitable for temperatures from -40°C to 140°C and pressures up to 48 bar, it’s ideal for professional installers looking to save up to 35% installation time compared to brazing methods.

ACR Instantor R-Press ¼ 90 Degree Elbow PxP (Pack Of 5)

The R-Press ¼ 90 Degree Elbow PxP (Pack Of 5) provides a secure, flame-free, and efficient way to create tight 90-degree bends in refrigeration and air conditioning pipework. Designed with a precision V-profile, it ensures a strong mechanical joint without the need for brazing or nitrogen purging. Manufactured from refrigerant grade copper (UNS C12200) and fitted with a robust HNBR O-ring, this elbow offers excellent sealing performance and durability. UL 207 certified and cULus listed, it meets strict industry standards for safety and reliability. Capable of withstanding pressures up to 48 bar and operating temperatures between -40°C and 140°C, it is ideal for installers seeking a faster, safer alternative to traditional methods.

ACR Instantor R-Press ⅜ 90 Degree Elbow PxP (Pack Of 5)

The R-Press ⅜ 90 Degree Elbow PxP (Pack Of 5) provides a secure, flame-free, and efficient way to create tight 90-degree bends in refrigeration and air conditioning pipework. Designed with a precision V-profile, it ensures a strong mechanical joint without the need for brazing or nitrogen purging. Manufactured from refrigerant grade copper (UNS C12200) and fitted with a robust HNBR O-ring, this elbow offers excellent sealing performance and durability. UL 207 certified and cULus listed, it meets strict industry standards for safety and reliability. Capable of withstanding pressures up to 48 bar and operating temperatures between -40°C and 140°C, it is ideal for installers seeking a faster, safer alternative to traditional methods.

ACR Instantor R-Press ½ 90 Degree Elbow PxP (Pack Of 3)

The R-Press ½ 90 Degree Elbow PxP (Pack Of 3) provides a secure, flame-free, and efficient way to create tight 90-degree bends in refrigeration and air conditioning pipework. Designed with a precision V-profile, it ensures a strong mechanical joint without the need for brazing or nitrogen purging. Manufactured from refrigerant grade copper (UNS C12200) and fitted with a robust HNBR O-ring, this elbow offers excellent sealing performance and durability. UL 207 certified and cULus listed, it meets strict industry standards for safety and reliability. Capable of withstanding pressures up to 48 bar and operating temperatures between -40°C and 140°C, it is ideal for installers seeking a faster, safer alternative to traditional methods.

ACR Instantor R-Press ¼ Straight Coupler PxP (Pack Of 5)

The R-Press ¼ Straight Coupler PxP (Pack Of 5) delivers a professional, secure, and flame-free connection for refrigeration and air conditioning installations. Made from high-quality refrigerant grade copper (UNS C12200) with a robust HNBR O-ring seal, this straight coupler offers excellent durability and leak resistance under demanding operating conditions. With its UL 207 certification and cULus listing, it meets strict safety and quality standards. Designed for mechanical joint installation, it eliminates the need for nitrogen purging or hot works, reducing on-site risks. Suitable for use in systems operating between -40°C and 140°C, this coupler can withstand pressures of up to 48 bar, making it a trusted choice for installers seeking speed, safety, and reliability.

ACR Instantor R-Press ⅜ Straight Coupler PxP (Pack Of 5)

The R-Press ⅜ Straight Coupler PxP (Pack Of 5) delivers a professional, secure, and flame-free connection for refrigeration and air conditioning installations. Made from high-quality refrigerant grade copper (UNS C12200) with a robust HNBR O-ring seal, this straight coupler offers excellent durability and leak resistance under demanding operating conditions. With its UL 207 certification and cULus listing, it meets strict safety and quality standards. Designed for mechanical joint installation, it eliminates the need for nitrogen purging or hot works, reducing on-site risks. Suitable for use in systems operating between -40°C and 140°C, this coupler can withstand pressures of up to 48 bar, making it a trusted choice for installers seeking speed, safety, and reliability.

Raptor Thermometer RAP100 Single Input Thermometer

Raptor Thermometer RAP100 Single Input Thermometer is a compact, professional-grade temperature measuring device designed for use with K-type thermocouple probes. It delivers fast, accurate readings across a wide temperature range, making it suitable for HVAC, refrigeration, cold storage, and laboratory settings. Its backlit LCD screen ensures visibility in dim environments, and it comes in a durable protective case for easy storage and transport. Single Input K-Type Thermometer with Backlit Display for HVAC and Industrial Use.

Trappex 22mm Centramag 2 Magnetic Filter

The Trappex Centramag 2 Magnetic Filter (22mm) is an advanced in-line filter designed to protect residential and light commercial heating systems from harmful debris. With a unique nine-separator design and quick-fit installation, it delivers premium performance in a compact form.

BritTherm Automatic Сirculator Pump P7 Series P7 25/10-180 (661995903)

The BritTherm P7 25/10-180 circulator pump is a robust, high-efficiency solution for commercial heating systems, including large residential installations and complex underfloor circuits. Engineered with permanent magnet motor technology and a compact rotor, this pump offers quiet operation, excellent energy efficiency, and advanced control. With 13 automatic operation modes and self-ventilated design, it delivers dependable performance for demanding environments. The BritTherm P7 25/10-180 represents a significant leap forward in circulator pump performance for commercial and high-demand residential systems. Its 180mm length and 25mm connections ensure it fits standard installations while delivering reliable output with a maximum head of 10 metres. This P7 model features an expanded set of 13 control modes, including four constant pressure settings (CP2–CP5), four proportional pressure options (PP2–PP5), and four constant rotor speed selections, plus the one-touch AUTO mode for universal compatibility. The P7 series also benefits from automatic night power reduction to just 5W, reducing energy use without sacrificing heating efficiency. Thanks to a self-ventilated body and integrated thermal and electrical protection, this pump ensures longevity, minimal maintenance, and uninterrupted performance even in challenging systems.   Features & Benefits: ✅ Permanent magnet motor for high efficiency ✅ Quiet operation with compact rotor design ✅ 13 advanced control modes for versatile applications ✅ AUTO mode for plug-and-play setup ✅ 4x Constant Pressure & 4x Proportional Pressure settings ✅ 4x Fixed rotor speeds for traditional control ✅ Energy-saving night mode reduces consumption to 5W ✅ Self-ventilated casing prevents air ingress ✅ Full thermal & electrical protection built-in ✅ Ideal for commercial and large domestic heating

BritTherm Automatic Сirculator Pump P7 Series P7 25/8-180 (661995901)

The BritTherm P7 25/8-180 is a high-performance circulator pump engineered for commercial heating applications. Featuring a permanent magnet motor and compact rotor design, it delivers whisper-quiet operation alongside excellent energy efficiency. With 13 automatic operation modes, including advanced pressure and speed settings, this pump suits a wide range of heating systems. Its self-ventilated casing and built-in protections ensure reliable, long-lasting performance. Designed specifically for commercial environments, the BritTherm P7 25/8-180 circulator pump combines advanced technology with versatile control options to meet diverse heating needs. This model features a 180mm length and 25mm ports, with a maximum head of 8 metres, making it suitable for systems requiring moderate flow and pressure. Its permanent magnet motor and compact rotor technology deliver low power consumption and nearly silent operation, making it ideal for installations where noise reduction is critical. The pump offers 13 operation modes: one AUTO mode for easy setup, four constant pressure modes (CP2–CP5), four proportional pressure modes (PP2–PP5), and four fixed rotor speeds, catering to both traditional and modern system requirements. The automatic night power reduction function lowers energy use to just 5 watts without compromising heating performance. Additionally, the self-ventilated pump body prevents air ingress, enhancing durability and efficiency. Electrical and thermal protection systems safeguard against damage caused by external factors, ensuring reliability.   Features & Benefits: ✅ Permanent magnet motor for superior efficiency ✅ Ultra-quiet operation thanks to compact rotor design ✅ 13 versatile operation modes including AUTO ✅ Four constant pressure modes (CP2 to CP5) ✅ Four proportional pressure modes (PP2 to PP5) ✅ Four fixed rotor speeds for traditional control ✅ Night power reduction to 5W for energy savings ✅ Self-ventilated casing to prevent air ingress ✅ Electrical and thermal protection for pump safety ✅ Ideal for commercial HVAC and underfloor heating

BritTherm Automatic Сirculator Pump P7 Series P7 32/10-180 (661995904)

The BritTherm P7 32/10-180 is a robust circulator pump tailored for commercial heating systems. It features a permanent magnet motor and compact rotor design that ensures whisper-quiet, energy-efficient operation. With 13 automatic operation modes including AUTO, constant pressure, proportional pressure, and fixed speed settings, this pump adapts to a wide variety of heating requirements. Its self-ventilated casing and built-in electrical and thermal protections guarantee reliable and safe performance. Designed for demanding commercial HVAC and underfloor heating applications, the BritTherm P7 32/10-180 offers advanced functionality combined with durable engineering. This pump has 32mm ports and a 180mm length, delivering up to 10 metres of head pressure, making it suitable for medium to large heating circuits. The pump’s permanent magnet motor and compact rotor technology minimise power consumption while maintaining ultra-quiet operation, ideal for installations where noise must be kept to a minimum. It includes 13 selectable operation modes: AUTO mode for simple commissioning, four constant pressure modes (CP2 to CP5) ideal for stable flow systems, four proportional pressure modes (PP2 to PP5) for systems with varying flow rates, and four fixed rotor speed modes for traditional setups. An automatic night power reduction function decreases power consumption to just 5 watts during low demand periods without affecting heating comfort. The self-ventilated pump body design prevents air ingress, enhancing reliability and efficiency. Electrical and thermal protection systems safeguard the pump from external faults, ensuring longevity and dependable operation.   Features & Benefits: ✅ Permanent magnet motor for superior energy efficiency ✅ Quiet operation with compact rotor technology ✅ 13 flexible operation modes including AUTO ✅ Four constant pressure modes (CP2 to CP5) ✅ Four proportional pressure modes (PP2 to PP5) ✅ Four fixed rotor speed modes for traditional control ✅ Night power reduction to 5W for energy savings ✅ Self-ventilated casing to prevent air ingress ✅ Electrical and thermal protection for added safety ✅ Ideal for commercial heating and underfloor heating systems

BritTherm Automatic Сirculator Pump P7 Series P7 32/8-180 (661995902)

The BritTherm P7 32/8-180 circulator pump is engineered for commercial heating applications, combining a permanent magnet motor with compact rotor technology for silent and energy-saving performance. Offering 13 automatic operation modes, including AUTO, constant pressure, proportional pressure, and fixed speed modes, it adapts easily to various system demands. With advanced electrical and thermal protections and a self-ventilated casing, this pump ensures reliability and long service life in underfloor heating and HVAC systems. Designed for commercial HVAC and underfloor heating systems, the BritTherm P7 32/8-180 is a high-performance circulator pump featuring 32mm ports and a 180mm length. It delivers up to 8 metres of head pressure, ideal for medium-demand installations requiring quiet and efficient operation. Equipped with a permanent magnet motor and compact rotor, the pump provides whisper-quiet operation while reducing power consumption. Its 13 selectable modes include AUTO mode for straightforward setup, four constant pressure modes (CP2 to CP5) for stable flow applications, four proportional pressure modes (PP2 to PP5) that adjust to varying flow rates, and four fixed rotor speed modes for traditional control. The automatic night power reduction feature drops energy use to just 5 watts during off-peak hours, maintaining heating quality while saving electricity. Its self-ventilated design prevents air ingress, improving operational reliability. Built-in electrical and thermal protection systems guard against external faults, minimising downtime and enhancing durability.   Features & Benefits: ✅ Permanent magnet motor for superior energy efficiency ✅ Whisper-quiet operation with compact rotor technology ✅ 13 flexible operation modes for varied heating systems ✅ Four constant pressure modes (CP2 to CP5) ✅ Four proportional pressure modes (PP2 to PP5) ✅ Four fixed rotor speed modes for consistent operation ✅ Automatic night power reduction to 5 watts ✅ Self-ventilated casing to prevent air ingress ✅ Electrical and thermal protection for enhanced safety ✅ Ideal for commercial HVAC and underfloor heating

Todays Tools 50ml That Rapid Blu Gel Anaerobic Sealant Non Drip

Todays Tools That Rapid Blu Gel 50ml Anaerobic Sealant is a powerful, fast-curing solution for sealing metal threaded joints in plumbing, heating, and gas installations. This non-drip, gel-based formula offers precise application with minimal mess, ensuring a secure, leak-proof seal that resists pressure and harsh conditions. Suitable for water, gas, oil, and air systems, this versatile sealant is ideal for professionals and DIY users alike.  

Todays Tools Pack Of 5no ⅝ Holeasw Adaptors For Use With Pit Bull Quick Change Arbor

The Todays Tools Pack of 5 x ⅝" Holesaw Adaptors is designed for seamless compatibility with the Pit Bull Quick Change Arbor. Built for fast and tool-free changes, these adaptors offer a secure fit, making them ideal for professionals who need reliable performance on the job.

Todays Tools 50ml That Rapid Blu Gel Anaerobic Sealant Non Drip

The Todays Tools That Rapid Blu Gel 50ml Anaerobic Sealant is a fast-curing, non-drip sealant designed for sealing threaded metal joints in plumbing, heating and gas applications. Its gel-based formula provides precise, clean application while creating a secure and leak-resistant seal. Suitable for potable water, gas, LPG, oil, grease and air systems, it can be used on metal-to-metal and compatible plastic-to-metal threaded connections. WRAS and DVGW approved, it is ideal for professional trade use.

MacDonald Plumbing Supplies MacAntifreeze Valve 28mm V2

The MacAntifreeze Valve 28mm V2 is a highly effective solution for protecting heat source pump systems from freezing temperatures. Automatically activating when the temperature drops to 3°C, this valve opens the flow and return circuit to prevent ice formation, safeguarding the system from potential damage. With no need for glycol or ongoing maintenance, it offers a cost-effective and low-maintenance solution to ensure smooth operation in cold weather.

MacDonald Plumbing Supplies Automatic Air Vent ⅛ Chrome

The Automatic Air Vent ⅛ Chrome is an essential fitting for releasing trapped air from heating and plumbing systems automatically. With a sleek chrome finish and compact design, it ensures smooth system operation while enhancing the aesthetic appeal of installations. Suitable for residential and commercial systems, this vent is highly reliable and easy to install.

MacDonald Plumbing Supplies Brass Air Vent Cap 15mm

The Brass Air Vent Cap 15mm is a durable and efficient solution for releasing trapped air from plumbing and heating systems. Made from high-quality brass, it ensures long-lasting performance while preventing air blockages that can reduce system efficiency. Easy to install and compact in design, this air vent cap is ideal for maintaining consistent pressure and ensuring smooth system operation.

MacDonald Plumbing Supplies Brass Slip Air Release Plug 15mm

The Brass Slip Air Release Plug 15mm is an essential component for effective venting of heating and plumbing systems. Designed with durability in mind, this robust brass fitting allows for the easy release of trapped air to optimise system performance. Its compact slip design ensures a quick and secure installation, making it a versatile and dependable choice for a range of applications.

Inta Zero Anti Freeze Valve 1" Male x 1" Female Swivel ZERO1SW

The Inta Zero Anti-Freeze Valve 1" Male x 1" Female Swivel ZERO1SW is designed to protect heat pump systems operating with water. It automatically discharges when the water temperature falls to 3°C, preventing ice formation that could lead to system breakdowns or costly damage.

Inta Zero Anti Freeze Valve 1¼ Male x 1¼ Female Swivel ZERO14SW

The Inta Zero Anti-Freeze Valve 1¼ Male x 1¼ Female Swivel ZERO14SW is specifically designed to safeguard heat pump systems operating with water. This unique valve discharges automatically when the water temperature falls to 3°C, preventing ice formation that could lead to system breakdowns or costly damage.

MacDonald Plumbing Supplies MacAnti Freeze Valve 28mm

The MacAnti Freeze Valve 28mm is designed to enable the antifreeze function in systems exposed to low outside air temperatures. This valve ensures the circuit medium is drained when temperatures reach an average value of 3℃, preventing ice formation and protecting your system, typically used with heat pumps, from potential damage.

MacDonald Plumbing Supplies MacAnti Freeze Valve 1"

The MacAnti Freeze Valve 1" is designed to enable the antifreeze function in systems exposed to low outside air temperatures. This valve ensures the circuit medium is drained when temperatures reach an average value of 3℃, preventing ice formation and protecting your system, typically used with heat pumps, from potential damage.

MacDonald Plumbing Supplies MacAnti Freeze Valve 1¼"

The MacAnti Freeze Valve 1¼" is designed to enable the antifreeze function in systems exposed to low outside air temperatures. This valve ensures the circuit medium is drained when temperatures reach an average value of 3℃, preventing ice formation and protecting your system, typically used with heat pumps, from potential damage.

Inta 35mm Anti-Freeze Valve ZERO35

Operation The Inta Zero is a unique antifreeze valve designed and engineered to protect heat pump systems that are operating with water. Designed to discharge when the system water temperature drops to 3°C, preventing ice from forming in the heat pump circuit that could cause breakdown or costly damage to the system.

Rob Pond Auto Air Vent & Check Valve ½

The Rob Pond ½" Auto Air Vent with Check Valve 12AAV is designed to efficiently remove trapped air from heating systems, enhancing performance and preventing potential issues. Its integrated check valve ensures optimal functionality and reliability.

Trappex Expansion Vessel Bracket

Securely and precisely connect your expansion vessel to your heating system with the Trappex Expansion Vessel Bracket. Designed for installations with limited space, this bracket ensures reliable support and functionality for expansion vessels ranging from 2 to 25 litres.

McAlpine VP1 Ventapipe 25 With 1½ BSP Thread On Outlet Grey

1½” BSP thread on Outlet A1 rated

McAlpine VP1W Ventapipe 25 With 1½ BSP Thread On Outlet White

1½” BSP thread on Outlet A1 rated

McAlpine VP4 Ventapipe 25 With Integral 1¼ Multi Fit Tee

1¼” Multifit Tee

McAlpine VP50-100 Ventapipe 50 For 2" 3" & 4" Pipe

Fits 2″, 3″/75mm or 4″/110mm pipe Dual fit synthetic rubber finger seal outlet Also incorporates 2″ Universal outlet

McAlpine VSG1T6SS Valve Shower Gully For Tiled Or Stone Floors 1½ Polished Stainless Steel

1½” BS EN 1329-1:2020 Solvent Weld Horizontal Outlet Sheet floor gully suitable for concrete and suspended timber floors Manufactured in ABS to the highest quality The valve acts as a non-return valve, the weight of the water discharge will open the valve and it will reseal when the discharge has ceased thus prohibiting foul air from entering the dwelling.

McAlpine VSG1T6WH Valve Shower Gully For Tiled Or Stone Floors 1½ White ABS

1½” BS EN 1329-1:2020 Solvent Weld Horizontal Outlet Sheet floor gully suitable for concrete and suspended timber floors Manufactured in ABS to the highest quality The valve acts as a non-return valve, the weight of the water discharge will open the valve and it will reseal when the discharge has ceased thus prohibiting foul air from entering the dwelling.

McAlpine VSG1WH Valve Shower Gully For Sheet Flooring 1½ White Plastic

1½” BS EN 1329-1:2020 Solvent Weld Horizontal Outlet Sheet floor gully suitable for concrete and suspended timber floors Manufactured in ABS to the highest quality The valve acts as a non-return valve, the weight of the water discharge will open the valve and it will reseal when the discharge has ceased thus prohibiting foul air from entering the dwelling.

McAlpine VSG1WH-NSC Valve Shower Gully For Sheet Flooring 1½ White Plastic (No Screws)

1½” BS EN 1329-1:2020 Solvent Weld Horizontal Outlet Sheet floor gully suitable for concrete and suspended timber floors Manufactured in ABS to the highest quality The valve acts as a non-return valve. The weight of the water discharge will open the valve and it will reseal when the discharge has ceased, thus prohibiting foul air from entering the dwelling. Eliminates the release of foul air due to backflow.

McAlpine VSG52T6SS Two-piece Valve Shower Gully For Tiled Or Stone Floors 1½ Polished Stainless Steel

1½” BS EN 1329-1:2020 Solvent Weld Horizontal Outlet Tiled/Stone floor gully suitable for concrete and suspended timber floors Manufactured in ABS to the highest quality The valve acts as a non-return valve. The weight of the water discharge will open the valve and it will reseal when the discharge has ceased thus prohibiting foul air from entering the dwelling. Eliminates the release of foul air due to backflow..

McAlpine VSG52T6WH Two-piece Valve Shower Gully For Tiled Or Stone Floors 1½ White ABS

1½” BS EN 1329-1:2020 Solvent Weld Horizontal Outlet Tiled/Stone floor gully suitable for concrete and suspended timber floors Manufactured in ABS to the highest quality The valve acts as a non-return valve. The weight of the water discharge will open the valve and it will reseal when the discharge has ceased thus prohibiting foul air from entering the dwelling. Eliminates the release of foul air due to backflow..

McAlpine VSG52WH Two-piece Valve Shower Gully For Sheet Flooring 1½ White Plastic

1½” BS EN 1329-1:2020 Solvent Weld Horizontal Outlet Tiled/Stone floor gully suitable for concrete and suspended timber floors Manufactured in ABS to the highest quality The valve acts as a non-return valve. The weight of the water discharge will open the valve and it will reseal when the discharge has ceased, thus prohibiting foul air from entering the dwelling. Eliminates the release of foul air due to backflow..

McAlpine VSG52WH-NSC Two-piece Valve Shower Gully For Sheet Flooring 1½ White Plastic (No Screws)

1½” BS EN 1329-1:2020 Solvent Weld Horizontal Outlet Tiled/Stone floor gully suitable for concrete and suspended timber floors Manufactured in ABS to the highest quality The valve acts as a non-return valve. The weight of the water discharge will open the valve and it will reseal when the discharge has ceased, thus prohibiting foul air from entering the dwelling. Eliminates the release of foul air due to backflow..

McAlpine Tunvalve (Clear) ¾ X 19/23mm

This non-return valve may be installed to take the discharge condensate from a boiler, air conditioning unit or cold water cistern when the discharge is being installed into a waste or soil pipe. The non-return valve will prevent foul odour entering the building

McAlpine TV1 Teevent 1½

Depending on model, can be connected directly to trap or extended away from the trap using a length of 1½” waste pipe For use with WM4 Trap Incorporates a Non-Return Valve, which provides an air break and enables the waste system to be sealed

McAlpine TSGSTOP Stopper For TSG Dip Tubes

When after installation the Gully is not going to be used there is a possibility that the water seal will evaporate. The Stopper when inserted into the Dip Tube will prevent foul air entering the building.  

McAlpine MACFILTER Two Way Active Carbon Filter

The McAlpine MACFILTER Two Way Active Carbon Filter is a high-performance external filtration system designed to eliminate unpleasant odours produced by drainage systems. Suitable for use with septic tanks, sewage treatment plants, rainwater tanks, and grease separators, this active carbon filter provides effective and reliable odour control for 4"/110mm pipe systems.

McAlpine A10AR Resealing Adjustable Inlet Bottle Trap 1¼

75mm Water Seal Multifit Compression Outlet suits all plastic, copper and lead pipes Adjustable Inlet makes trap suitable for all domestic repair, maintenance and improvement work The simple non-mechanical action ensures retention of adequate water seal even under extreme syphonic conditions

Regin Yellow Hi-Viz Silicone Tube (6mm ID) REGU98

Enhance visibility and safety with Regin's Hi-Viz Silicone Tube. This 2-metre length tubing, with a 6mm internal diameter, is designed for use with gas readings in manometers. The vibrant yellow colour ensures better visibility compared to standard tubing. It is suitable for high-temperature applications, with a capacity to withstand temperatures up to 150°C.

McAlpine VSG52SL-WH Slimline Floor Gully With Non-Return Valve Round 1½ White

The Shallowest McAlpine Gully available at only 59mm. Suitable for Tiled Flooring. The valve acts as a non-return valve, and the weight of the water discharge will open the valve then it will reseal when the discharge has ceased thus prohibiting foul air from entering the dwelling. Eliminates the release of foul air due to backflow.

Todays Tools Pit Bull Folding Bucket 11L PBFB

The Todays Tools Pit Bull Folding Bucket 11L PBFB is a practical, lightweight and highly durable solution for everyday trade, DIY and outdoor tasks. With an 11 litre capacity, it provides ample volume for carrying water, tools, cleaning supplies or materials while remaining easy to store and transport. Its foldable design allows it to collapse flat, making it ideal for vans, tool bags and tight storage spaces. Built with leakproof construction and reinforced seams, this bucket offers long lasting reliability whether used on site, in the garden or during maintenance work. A convenient, multi purpose option for anyone needing a portable and dependable bucket.

Trappex 22mm Centramag 2 Magnetic Filter

The Trappex Centramag 2 Magnetic Filter (22mm) is an advanced in-line filter designed to protect residential and light commercial heating systems from harmful debris. With a unique nine-separator design and quick-fit installation, it delivers premium performance in a compact form.

MacDonald Plumbing Supplies MacVent 15mm Compression Air Vent

The MacVent 15mm Compression Air Vent is a versatile manual air vent designed for use with 15mm compression fittings in heating, cooling, and other wet systems. Manufactured from durable brass, it can replace a standard 15mm olive to provide a convenient venting point. Suitable for both temporary and permanent applications, it offers a reusable and practical solution for installers working on vented and unvented systems.

McAlpine VSG52SL-T6SQ-B Slimline Floor Gully For Sheet Flooring With Non-Return Valve Square 1½

The Shallowest McAlpine Gully available at only 59mm. Suitable for Tiled Flooring. The valve acts as a non-return valve, and the weight of the water discharge will open the valve then it will reseal when the discharge has ceased thus prohibiting foul air from entering the dwelling. Eliminates the release of foul air due to backflow.

Advantay Heat Pump Buffer Tank 24 Litres

Specifically designed for use with heat pump installations. to provide a stored volume of heated water which helps to prevent heat pump short cycling and can increase response mes, COP and increase the lifespan of the heat pump. Use for treated water only. The ACF-P range features wall mounting brackets featuring twin insulaon layer and a so PVC Jacket. The ACF-P has an industry leading Class A energy rating and is ERP ready. Made from Carbon Steel and will need suitable water treatment to prevent corrosion.

Hotun Shield Dry Trap Tundish HS100C

Hotun shield 100C prevents any access to any potentially scalding water discharging through the tundish. It is normally fitted on a risk assessment basis on boiler applications if the tundish is located in an accessible position. As an accessory, Hotun shield is the ONLY product available on the market which is 100% effective at preventing access to potentially scalding hot water still allowing visibility of any discharging water. To fit Hotun shield, simply place the product onto the Hotun tundish and click into place. The shield is held securely in place with the plastic nut. Due to Water Regulation requirements Hotun shield is NOT to be used for unvented water heater applications or applications where the connection to drain is in "fluid communication" with wholesome water. Hotun shield 100C is only compatible with the Hotun "100C" range of tundishes (for sf range shield alternative see model product number (MPN) - HSSF.

Hotun SF Range Black 15 - 22 Dry Trap Tundish HBSF15-22

The revolutionary, market-leading, plumber-designed Hotun dry trap tundish allows a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Allowing both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline which makes it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. This means that diagnoses of any faults is quick and simple. Hotun fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge

Hotun SF Range White 15 - 22 Dry Trap Tundish HWSF15-22

The revolutionary, market-leading, plumber-designed Hotun dry trap tundish allows a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Allowing both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline which makes it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. This means that diagnoses of any faults is quick and simple. Hotun fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge

Hotun SF Range Hiflo Black 15 - 32 Dry Trap Tundish HHBSF15-32

From the manufacturer that brought you the revolutionary, market-leading, plumber-designed Hotun dry trap tundish, here is our latest innovation, the Hotun Hiflo sf push-fit dry trap tundish. Allowing a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Taking both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline making it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers and now, with its push-fit inlet connection, can be fitted in seconds. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. Making diagnoses of any faults quick and simple. Hotun Hiflo sf is WRAS approved and fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge.

Hotun SF Range Hiflo White 15 - 32 Dry Trap Tundish HHWSF15-32

From the manufacturer that brought you the revolutionary, market-leading, plumber-designed Hotun dry trap tundish, here is our latest innovation, the Hotun Hiflo sf push-fit dry trap tundish. Allowing a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Taking both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline making it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers and now, with its push-fit inlet connection, can be fitted in seconds. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. Making diagnoses of any faults quick and simple. Hotun Hiflo sf is WRAS approved and fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge.

Hotun SF Range XL 22 - 32 Dry Trap Tundish HXLSF22-32

From the manufacturer that brought you the revolutionary, market-leading, plumber-designed Hotun dry trap tundish, here is our latest innovation, the Hotun xl sf push-fit dry trap tundish. Allowing a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Taking both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline making it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers and now, with its push-fit inlet connection, can be fitted in seconds. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. Making diagnoses of any faults quick and simple. Hotun xl sf is WRAS approved and fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge.

Hotun SF Range Shield Dry Trap Tundish HSSF

Hotun shield sf prevents any access to any potentially scalding water discharging through the tundish. It is normally fitted on a risk assessment basis on boilers, if the tundish is located in an accessible position. As an accessory, Hotun shield sf is the ONLY product available on the market which is 100% effective at preventing access to potentially scalding hot water still allowing visibility of any discharging water. To fit Hotun shield sf simply place the product onto the Hotun tundish and click into place. The shield is held securely in place with the plastic circlip. Due to Water Regulation requirements, Hotun shield sf is NOT to be used for unvented water heater applications or applications where the connection to drain is in "fluid communication" with wholesome water. Hotun shield sf is only compatible with the Hotun sf range of tundishes. (except Hotun xl sf unless shield is modified) (for 100C range shield alternative see model product number (MPN) - HS100C).

Hotun White 15 - 22 Dry Trap Tundish HW100C15-22

The revolutionary, market-leading, plumber-designed hotun dry trap tundish allows a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Allowing both trickle and full flow but preventing foul odours and gases from coming back into a property, hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline which makes it ideal for use in hard water areas. Award-winning and cost effective, Hotun  is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. This means that diagnoses of any faults is quick and simple. Hotun is WRAS approved and fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge.

Hotun Hiflo Black 15 - 32 Dry Trap Tundish HHB100C15-32

The revolutionary, market-leading, plumber-designed Hotun dry trap tundish allows a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Allowing both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline which makes it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. This means that diagnoses of any faults is quick and simple. Hotun fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge

Hotun Hiflo White 15 - 32 Dry Trap Tundish HHW100C15-32

The revolutionary, market-leading, plumber-designed Hotun dry trap tundish allows a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Allowing both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline which makes it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. This means that diagnoses of any faults is quick and simple. Hotun fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge

Hotun Black 15 - 22 Dry Trap Tundish HB100C15-22

The revolutionary, market-leading, plumber-designed hotun dry trap tundish allows a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Allowing both trickle and full flow but preventing foul odours and gases from coming back into a property, hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline which makes it ideal for use in hard water areas. Award-winning and cost effective, Hotun  is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. This means that diagnoses of any faults is quick and simple. Hotun is WRAS approved and fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge.

Inta 28mm Anti-Freeze Valve ZERO28

Operation The Inta Zero is a unique antifreeze valve designed and engineered to protect heat pump systems that are operating with water. Designed to discharge when the system water temperature drops to 3°C, preventing ice from forming in the heat pump circuit that could cause breakdown or costly damage to the system.

Todays Tools Quick Saw Cable Pipe Saw 600mm QSPS

The Todays Tools Quick Saw Cable Pipe Saw 600mm QSPS is a practical pipe cutting tool designed for cutting plastic pipes where access is restricted. Featuring a durable stainless steel cutting cable and comfortable soft grip handles, it is suitable for cutting a wide range of plastic pipe materials including PP, PEX and PVC. The flexible 600mm design makes it particularly useful for plumbers and heating engineers working in confined or difficult-to-reach areas.

Todays Tools Multi Size Rad Valve Tail Key & Ratchet Inc 22mm Socket MGPS

The Todays Tools Multi Size Rad Valve Tail Key & Ratchet Inc 22mm Socket MGPS is a versatile radiator installation and removal set designed for internal fittings from 3/8 inch to 1 inch. Its unique combination stepped key design provides multiple sizes in one tool, making it suitable for radiator valve tails, lugs, nipples and tank connectors. The set includes a 1/2 inch drive ratchet manufactured from high strength chrome vanadium steel for strength and reliability. A 22mm socket is also included for working with compatible air vents and blanking plugs.

Todays Tools Automatic Ratchet Pipe Shear 0-42mm PS

The Todays Tools Auto Ratchet Plastic Pipe Shear 0-42mm PS is a durable and easy-to-use pipe cutting tool designed for clean, accurate cuts through plastic pipework. Featuring a high-quality ratchet mechanism and long-life stainless steel angled V-shaped blade, it makes cutting larger and more rigid pipes easier while helping to reduce pipe distortion. Suitable for PP, PEX, PX, PVC and ABS plastic pipes, it is ideal for professional plumbing and heating applications.

Gledhill SL Plus HP 400 4SQM EE PLUHP400

Due to the fact that many heat pumps will not raise the stored water temperature to 60 degrees celsius, which is necessary to prevent the growth of legionella, the StainlessLite Plus HP model is supplied with an immersion heater tapping and a thermostat pocket.

Regin Automatic Air Vent Removal Tool REGT30

Regin Automatic Air Vent Removal Tool . The Regin AAV Removal Tool is designed to assist in the replacement of the Caleffi Robocal 502 series Automatic Air Vents, particularly where access with a normal spanner or grips is at best very difficult due to location within the appliance For easy replacement of: Caleffi Robocal 502 Series AAVs found on many Combi Boilers & Pumps Includes 7mm Bolt for awkward locations

Regin Automatic Air Vent Removal Tool REGT31

  Automatic Air Vent Removal Tool.

MacDonald Plumbing Supplies Denso Protective Tape 50mm x 10Mtr

The Denso Protective Tape 50mm x 10Mtr is a highly durable self-adhesive tape designed to provide long-lasting waterproofing and corrosion protection for pipes, fittings, valves, and metal surfaces. Measuring 50mm wide and supplied on a 10-metre roll, it creates a reliable watertight and airtight barrier that helps extend the life of plumbing and industrial installations. Its flexible construction allows it to conform easily to irregular shapes, making it ideal for maintenance, repairs, and new installations.

FM Products Clip Link Pipe Clip 15mm Double (Qty Of 50) P613

The 15mm Double Pipe Clip is designed to securely hold and fasten two pipes of 15mm diameter in place. It provides a reliable and durable solution for double pipe installations, offering stability and preventing movement or vibration. This clip is suitable for various applications, including plumbing, heating, and other pipe systems.

FM Products Clip Link Pipe Clip 22mm Double (Qty Of 50) P614

The 22mm Double Pipe Clip is designed to securely hold and fasten two pipes of 22mm diameter in place. It provides a reliable and durable solution for double pipe installations, offering stability and preventing movement or vibration. This clip is suitable for various applications, including plumbing, heating, and other pipe systems.

PipeSnug Solvent Weld Waste 32mm White 2 Pack PS32WH2PKSF

* Internal and external use * Fits 52mm core-drilled hole * Designed for Solvent weld waste pipe fittings * Boiler condensate pipe (when fed into 32mm pipe to avoid freezing) * Use for bathroom waste or kitchen waste * Fits all makes of solvent weld waste pipe elbow * Replaces need to ‘make good’ around pipes where they exit the wall * Installs in seconds * Fits all makes of solvent weld waste pipe elbow * Professional finish with Air and water-tight seal * Cheaper and cleaner than traditional methods

PipeSnug Solvent Weld Waste 40mm Black 2 Pack PS40BK2PKSF

* Internal and external use * Fits 52mm core-drilled hole * Designed for Solvent weld waste pipe fittings * Boiler condensate pipe (when fed into 40mm pipe to avoid freezing) * Use for bathroom waste or kitchen waste * Fits all makes of solvent weld waste pipe elbow * Replaces need to ‘make good’ around pipes where they exit the wall * Installs in seconds * Fits all makes of solvent weld waste pipe elbow * Professional finish with Air and water-tight seal * Cheaper and cleaner than traditional methods

PipeSnug Solvent Weld Waste 40mm White 2 Pack PS40WH2PKSF

* Internal and external use * Fits 52mm core-drilled hole * Designed for Solvent weld waste pipe fittings * Boiler condensate pipe (when fed into 40mm pipe to avoid freezing) * Use for bathroom waste or kitchen waste * Fits all makes of solvent weld waste pipe elbow * Replaces need to ‘make good’ around pipes where they exit the wall * Installs in seconds * Fits all makes of solvent weld waste pipe elbow * Professional finish with Air and water-tight seal * Cheaper and cleaner than traditional methods

PipeSnug 110mm Grey PS110GYSF

* Internal and external use * Fits 152mm core-drilled hole * Designed for all push-fit and solvent weld soil pipe fittings * Use for soil pipe sealant or waste pipe cover * Fits all makes of solvent weld and push-fit soil waste pipe fittings * Replaces need to ‘make good’ around pipes where they exit the wall * Installs in seconds * For use with 110mm/4" soil waste pipe * Professional finish with Air and water-tight seal * Cheaper and cleaner than traditional methods

PipeSnug 110mm White PS110WHSF

* Internal and external use * Fits 152mm core-drilled hole * Designed for all push-fit and solvent weld soil pipe fittings * Use for soil pipe sealant or waste pipe cover * Fits all makes of solvent weld and push-fit soil waste pipe fittings * Replaces need to ‘make good’ around pipes where they exit the wall * Installs in seconds * For use with 110mm/4" soil waste pipe * Professional finish with Air and water-tight seal * Cheaper and cleaner than traditional methods

PipeSnug Solvent Weld Waste 32mm Black 2 Pack PS32BK2PKSF

* Internal and external use * Fits 52mm core-drilled hole * Designed for Solvent weld waste pipe fittings * Boiler condensate pipe (when fed into 32mm pipe to avoid freezing) * Use for bathroom waste or kitchen waste * Fits all makes of solvent weld waste pipe elbow * Replaces need to ‘make good’ around pipes where they exit the wall * Installs in seconds * Fits all makes of solvent weld waste pipe elbow * Professional finish with Air and water-tight seal * Cheaper and cleaner than traditional methods

PipeSnug 110mm Black PS110BKSF

* Internal and external use * Fits 152mm core-drilled hole * Designed for all push-fit and solvent weld soil pipe fittings * Use for soil pipe sealant or waste pipe cover * Fits all makes of solvent weld and push-fit soil waste pipe fittings * Replaces need to ‘make good’ around pipes where they exit the wall * Installs in seconds * For use with 110mm/4" soil waste pipe * Professional finish with Air and water-tight seal * Cheaper and cleaner than traditional methods

Eastbrook D Shaped Vent Cap (Pair) Grey 101.0114

Product DataHeight (mm) = n/aLength (mm) = n/aWidth (mm) = n/aInternal Depth (mm) = n/aWater Capacity (Litres) = n/aAdjustment (mm) = n/aBar Pressure Key = n/aColour = GreyDoor Opening (mm) = n/aEasy clean glass = n/aElement Power = n/aEnclosure Size = n/aGlass Thickness (mm) = n/aMaterial = n/aMinimum Bar Pressure required = n/aNumber of grips Supported = n/aNumber of Tap holes = n/aProduct Range = UniversalTray Plan = n/aBTU Range ΔT60°C = n/aBTU Delta ΔT60°C = n/aWatts Delta ΔT60°C = n/aBTU Delta ΔT50°C = n/aWatts Delta ΔT50°C = n/aBTU Range ΔT50°C = n/aProduct Type = Vent CapFlow rate Litres/Min (1.0 bar) = n/aFlow rate Litres/Min (2.0 bar) = n/aFlow rate Litres/Min (3.0 bar) = n/aFrosted Glass? = n/aGlass Type = n/aManufacturers Warranty (years) = 2Supplied with fixings? = n/aSchema classification = Heating AccessoriesNumber of Horizontal Bars = n/aNumber of Vertical Bars = n/aNumber of Vertical Panels = n/aPanel thickness (mm) = n/aValve Types = n/aWRAS Approved = n/a

Eastbrook D Shaped Vent Cap (Pair) Black 101.0060

Product DataHeight (mm) = n/aLength (mm) = n/aWidth (mm) = n/aInternal Depth (mm) = n/aWater Capacity (Litres) = n/aAdjustment (mm) = n/aBar Pressure Key = n/aColour = BlackDoor Opening (mm) = n/aEasy clean glass = n/aElement Power = n/aEnclosure Size = n/aGlass Thickness (mm) = n/aMaterial = n/aMinimum Bar Pressure required = n/aNumber of grips Supported = n/aNumber of Tap holes = n/aProduct Range = UniversalTray Plan = n/aBTU Range ΔT60°C = n/aBTU Delta ΔT60°C = n/aWatts Delta ΔT60°C = n/aBTU Delta ΔT50°C = n/aWatts Delta ΔT50°C = n/aBTU Range ΔT50°C = n/aProduct Type = Vent CapFlow rate Litres/Min (1.0 bar) = n/aFlow rate Litres/Min (2.0 bar) = n/aFlow rate Litres/Min (3.0 bar) = n/aFrosted Glass? = n/aGlass Type = n/aManufacturers Warranty (years) = 2Supplied with fixings? = n/aSchema classification = Heating AccessoriesNumber of Horizontal Bars = n/aNumber of Vertical Bars = n/aNumber of Vertical Panels = n/aPanel thickness (mm) = n/aValve Types = n/aWRAS Approved = n/a

Eastbrook Round Vent Cap (Pair) Cappuccino 101.0003

Product DataHeight (mm) = n/aLength (mm) = n/aWidth (mm) = n/aInternal Depth (mm) = n/aWater Capacity (Litres) = n/aAdjustment (mm) = n/aBar Pressure Key = n/aColour = CappuccinoDoor Opening (mm) = n/aEasy clean glass = n/aElement Power = n/aEnclosure Size = n/aGlass Thickness (mm) = n/aMaterial = n/aMinimum Bar Pressure required = n/aNumber of grips Supported = n/aNumber of Tap holes = n/aProduct Range = UniversalTray Plan = n/aBTU Range ΔT60°C = n/aBTU Delta ΔT60°C = n/aWatts Delta ΔT60°C = n/aBTU Delta ΔT50°C = n/aWatts Delta ΔT50°C = n/aBTU Range ΔT50°C = n/aProduct Type = Vent CapFlow rate Litres/Min (1.0 bar) = n/aFlow rate Litres/Min (2.0 bar) = n/aFlow rate Litres/Min (3.0 bar) = n/aFrosted Glass? = n/aGlass Type = n/aManufacturers Warranty (years) = 2Supplied with fixings? = n/aSchema classification = Heating AccessoriesNumber of Horizontal Bars = n/aNumber of Vertical Bars = n/aNumber of Vertical Panels = n/aPanel thickness (mm) = n/aValve Types = n/aWRAS Approved = n/a

Eastbrook Round Vent Cap (Pair) Anthracite 101.0004

Product DataHeight (mm) = n/aLength (mm) = n/aWidth (mm) = n/aInternal Depth (mm) = n/aWater Capacity (Litres) = n/aAdjustment (mm) = n/aBar Pressure Key = n/aColour = AnthraciteDoor Opening (mm) = n/aEasy clean glass = n/aElement Power = n/aEnclosure Size = n/aGlass Thickness (mm) = n/aMaterial = n/aMinimum Bar Pressure required = n/aNumber of grips Supported = n/aNumber of Tap holes = n/aProduct Range = UniversalTray Plan = n/aBTU Range ΔT60°C = n/aBTU Delta ΔT60°C = n/aWatts Delta ΔT60°C = n/aBTU Delta ΔT50°C = n/aWatts Delta ΔT50°C = n/aBTU Range ΔT50°C = n/aProduct Type = Vent CapFlow rate Litres/Min (1.0 bar) = n/aFlow rate Litres/Min (2.0 bar) = n/aFlow rate Litres/Min (3.0 bar) = n/aFrosted Glass? = n/aGlass Type = n/aManufacturers Warranty (years) = 2Supplied with fixings? = n/aSchema classification = Heating AccessoriesNumber of Horizontal Bars = n/aNumber of Vertical Bars = n/aNumber of Vertical Panels = n/aPanel thickness (mm) = n/aValve Types = n/aWRAS Approved = n/a

Eastbrook Round Vent Cap (Pair) Black 101.0005

Product DataHeight (mm) = n/aLength (mm) = n/aWidth (mm) = n/aInternal Depth (mm) = n/aWater Capacity (Litres) = n/aAdjustment (mm) = n/aBar Pressure Key = n/aColour = BlackDoor Opening (mm) = n/aEasy clean glass = n/aElement Power = n/aEnclosure Size = n/aGlass Thickness (mm) = n/aMaterial = n/aMinimum Bar Pressure required = n/aNumber of grips Supported = n/aNumber of Tap holes = n/aProduct Range = UniversalTray Plan = n/aBTU Range ΔT60°C = n/aBTU Delta ΔT60°C = n/aWatts Delta ΔT60°C = n/aBTU Delta ΔT50°C = n/aWatts Delta ΔT50°C = n/aBTU Range ΔT50°C = n/aProduct Type = Vent CapFlow rate Litres/Min (1.0 bar) = n/aFlow rate Litres/Min (2.0 bar) = n/aFlow rate Litres/Min (3.0 bar) = n/aFrosted Glass? = n/aGlass Type = n/aManufacturers Warranty (years) = 2Supplied with fixings? = n/aSchema classification = Heating AccessoriesNumber of Horizontal Bars = n/aNumber of Vertical Bars = n/aNumber of Vertical Panels = n/aPanel thickness (mm) = n/aValve Types = n/aWRAS Approved = n/a

Eastbrook Round Vent Cap (Pair) Chrome 101.0006

Product DataHeight (mm) = n/aLength (mm) = n/aWidth (mm) = n/aInternal Depth (mm) = n/aWater Capacity (Litres) = n/aAdjustment (mm) = n/aBar Pressure Key = n/aColour = ChromeDoor Opening (mm) = n/aEasy clean glass = n/aElement Power = n/aEnclosure Size = n/aGlass Thickness (mm) = n/aMaterial = n/aMinimum Bar Pressure required = n/aNumber of grips Supported = n/aNumber of Tap holes = n/aProduct Range = UniversalTray Plan = n/aBTU Range ΔT60°C = n/aBTU Delta ΔT60°C = n/aWatts Delta ΔT60°C = n/aBTU Delta ΔT50°C = n/aWatts Delta ΔT50°C = n/aBTU Range ΔT50°C = n/aProduct Type = Vent CapFlow rate Litres/Min (1.0 bar) = n/aFlow rate Litres/Min (2.0 bar) = n/aFlow rate Litres/Min (3.0 bar) = n/aFrosted Glass? = n/aGlass Type = n/aManufacturers Warranty (years) = 2Supplied with fixings? = n/aSchema classification = Heating AccessoriesNumber of Horizontal Bars = n/aNumber of Vertical Bars = n/aNumber of Vertical Panels = n/aPanel thickness (mm) = n/aValve Types = n/aWRAS Approved = n/a

Eastbrook D Shaped Vent Cap (Pair) White 101.0007

Product DataHeight (mm) = n/aLength (mm) = n/aWidth (mm) = n/aInternal Depth (mm) = n/aWater Capacity (Litres) = n/aAdjustment (mm) = n/aBar Pressure Key = n/aColour = WhiteDoor Opening (mm) = n/aEasy clean glass = n/aElement Power = n/aEnclosure Size = n/aGlass Thickness (mm) = n/aMaterial = n/aMinimum Bar Pressure required = n/aNumber of grips Supported = n/aNumber of Tap holes = n/aProduct Range = UniversalTray Plan = n/aBTU Range ΔT60°C = n/aBTU Delta ΔT60°C = n/aWatts Delta ΔT60°C = n/aBTU Delta ΔT50°C = n/aWatts Delta ΔT50°C = n/aBTU Range ΔT50°C = n/aProduct Type = Vent CapFlow rate Litres/Min (1.0 bar) = n/aFlow rate Litres/Min (2.0 bar) = n/aFlow rate Litres/Min (3.0 bar) = n/aFrosted Glass? = n/aGlass Type = n/aManufacturers Warranty (years) = 2Supplied with fixings? = n/aSchema classification = Heating AccessoriesNumber of Horizontal Bars = n/aNumber of Vertical Bars = n/aNumber of Vertical Panels = n/aPanel thickness (mm) = n/aValve Types = n/aWRAS Approved = n/a

Eastbrook D Shaped Vent Cap (Pair) Anthracite 101.0008

Product DataHeight (mm) = n/aLength (mm) = n/aWidth (mm) = n/aInternal Depth (mm) = n/aWater Capacity (Litres) = n/aAdjustment (mm) = n/aBar Pressure Key = n/aColour = AnthraciteDoor Opening (mm) = n/aEasy clean glass = n/aElement Power = n/aEnclosure Size = n/aGlass Thickness (mm) = n/aMaterial = n/aMinimum Bar Pressure required = n/aNumber of grips Supported = n/aNumber of Tap holes = n/aProduct Range = UniversalTray Plan = n/aBTU Range ΔT60°C = n/aBTU Delta ΔT60°C = n/aWatts Delta ΔT60°C = n/aBTU Delta ΔT50°C = n/aWatts Delta ΔT50°C = n/aBTU Range ΔT50°C = n/aProduct Type = Vent CapFlow rate Litres/Min (1.0 bar) = n/aFlow rate Litres/Min (2.0 bar) = n/aFlow rate Litres/Min (3.0 bar) = n/aFrosted Glass? = n/aGlass Type = n/aManufacturers Warranty (years) = 2Supplied with fixings? = n/aSchema classification = Heating AccessoriesNumber of Horizontal Bars = n/aNumber of Vertical Bars = n/aNumber of Vertical Panels = n/aPanel thickness (mm) = n/aValve Types = n/aWRAS Approved = n/a

Eastbrook D Shaped Vent Cap (Pair) Chrome 101.0009

Product DataHeight (mm) = n/aLength (mm) = n/aWidth (mm) = n/aInternal Depth (mm) = n/aWater Capacity (Litres) = n/aAdjustment (mm) = n/aBar Pressure Key = n/aColour = ChromeDoor Opening (mm) = n/aEasy clean glass = n/aElement Power = n/aEnclosure Size = n/aGlass Thickness (mm) = n/aMaterial = n/aMinimum Bar Pressure required = n/aNumber of grips Supported = n/aNumber of Tap holes = n/aProduct Range = UniversalTray Plan = n/aBTU Range ΔT60°C = n/aBTU Delta ΔT60°C = n/aWatts Delta ΔT60°C = n/aBTU Delta ΔT50°C = n/aWatts Delta ΔT50°C = n/aBTU Range ΔT50°C = n/aProduct Type = Vent CapFlow rate Litres/Min (1.0 bar) = n/aFlow rate Litres/Min (2.0 bar) = n/aFlow rate Litres/Min (3.0 bar) = n/aFrosted Glass? = n/aGlass Type = n/aManufacturers Warranty (years) = 2Supplied with fixings? = n/aSchema classification = Heating AccessoriesNumber of Horizontal Bars = n/aNumber of Vertical Bars = n/aNumber of Vertical Panels = n/aPanel thickness (mm) = n/aValve Types = n/aWRAS Approved = n/a

Eastbrook Round Vent Cap (Pair) White 101.0001

Product DataHeight (mm) = n/aLength (mm) = n/aWidth (mm) = n/aInternal Depth (mm) = n/aWater Capacity (Litres) = n/aAdjustment (mm) = n/aBar Pressure Key = n/aColour = WhiteDoor Opening (mm) = n/aEasy clean glass = n/aElement Power = n/aEnclosure Size = n/aGlass Thickness (mm) = n/aMaterial = n/aMinimum Bar Pressure required = n/aNumber of grips Supported = n/aNumber of Tap holes = n/aProduct Range = UniversalTray Plan = n/aBTU Range ΔT60°C = n/aBTU Delta ΔT60°C = n/aWatts Delta ΔT60°C = n/aBTU Delta ΔT50°C = n/aWatts Delta ΔT50°C = n/aBTU Range ΔT50°C = n/aProduct Type = Vent CapFlow rate Litres/Min (1.0 bar) = n/aFlow rate Litres/Min (2.0 bar) = n/aFlow rate Litres/Min (3.0 bar) = n/aFrosted Glass? = n/aGlass Type = n/aManufacturers Warranty (years) = 2Supplied with fixings? = n/aSchema classification = Heating AccessoriesNumber of Horizontal Bars = n/aNumber of Vertical Bars = n/aNumber of Vertical Panels = n/aPanel thickness (mm) = n/aValve Types = n/aWRAS Approved = n/a

Eastbrook Round Vent Cap (Pair) Grey 101.0002

Product DataHeight (mm) = n/aLength (mm) = n/aWidth (mm) = n/aInternal Depth (mm) = n/aWater Capacity (Litres) = n/aAdjustment (mm) = n/aBar Pressure Key = n/aColour = GreyDoor Opening (mm) = n/aEasy clean glass = n/aElement Power = n/aEnclosure Size = n/aGlass Thickness (mm) = n/aMaterial = n/aMinimum Bar Pressure required = n/aNumber of grips Supported = n/aNumber of Tap holes = n/aProduct Range = UniversalTray Plan = n/aBTU Range ΔT60°C = n/aBTU Delta ΔT60°C = n/aWatts Delta ΔT60°C = n/aBTU Delta ΔT50°C = n/aWatts Delta ΔT50°C = n/aBTU Range ΔT50°C = n/aProduct Type = Vent CapFlow rate Litres/Min (1.0 bar) = n/aFlow rate Litres/Min (2.0 bar) = n/aFlow rate Litres/Min (3.0 bar) = n/aFrosted Glass? = n/aGlass Type = n/aManufacturers Warranty (years) = 2Supplied with fixings? = n/aSchema classification = Heating AccessoriesNumber of Horizontal Bars = n/aNumber of Vertical Bars = n/aNumber of Vertical Panels = n/aPanel thickness (mm) = n/aValve Types = n/aWRAS Approved = n/a

Altecnic 15mm Robocal Auto Air Vent 6 bar 502649

SPECIFICATION The range of automatic air vents is operated via a float mechanism and is designed for the removal of air from systems

Altecnic 1/2" Robocal Auto Air Vent 6 bar 502640

SPECIFICATION The range of automatic air vents is operated via a float mechanism and is designed for the removal of air from systems

Altecnic 3/8" Robocal Auto Air Vent 4 bar 502430

SPECIFICATION The range of automatic air vents is operated via a float mechanism and is designed for the removal of air from systems

Altecnic 22mm x 28mm Straight Plastic Tundish AP-400011

SPECIFICATION Suitable for use where air gap or air break is required in sealed or unvented systems.

McAlpine FGT150-SV-110 150mm Square Stainless Steel Tile With Internal Non-Return Valve (Push-fit Outlet)

Push-fit outlet Suitable for wet floor areas where 4″/110mm drainage pipework has been installed to the finished floor level Internal non-return valve prevents foul air entering the building

McAlpine MACTUN-1 Tundish With Self Closing Valve 15mm Inlet X 22mm Outlet

The McAlpine MACTUN-1 Tundish with Self Closing Valve is a unique solution, featuring a silicone membrane seal that remains unaffected by hard water. It prevents foul odours or sewer gas from entering the building when installed in a waste or soil pipe. With no spring mechanism, the membrane seal offers smooth discharge flow from the PRV/TRV. This maintenance-free product is KIWA Certified and WRAS approved, suitable for use on cylinders, boilers, water heaters, PRV valves, condensate, and air conditioning units.

McAlpine MACTUN-2 Tundish With Self Closing Valve 15/22mm Inlet X 1¼ Outlet

The McAlpine MACTUN-1 Tundish with Self Closing Valve is a unique solution, featuring a silicone membrane seal that remains unaffected by hard water. It prevents foul odours or sewer gas from entering the building when installed in a waste or soil pipe. With no spring mechanism, the membrane seal offers smooth discharge flow from the PRV/TRV. This maintenance-free product is KIWA Certified and WRAS approved, suitable for use on cylinders, boilers, water heaters, PRV valves, condensate, and air conditioning units.

McAlpine ST90CP10-NRV 90mm Shower Trap With Non-Return Valve

90mm Shower Trap with Non-Return Valve 90mm x Spring Loaded Non-Return Valve with 1½” Solvent Weld Outlet Socket Overall height 53mm The valve acts as a non-return valve. The weight of the water discharge will open the valve and it will reseal when the discharge has ceased thus prohibiting foul air from entering the dwelling.

McAlpine VP100E-GR Ventapipe 100 Internal/external For 4" Pipe Grey

Fits 4″/110mm soil pipe Dual fit synthetic rubber finger seal outlet A1 rated Can be installed above or below the flood level of connecting appliances.

McAlpine VP100E-WH Ventapipe 100 Internal/external For 4" Pipe White

Fits 4″/110mm soil pipe Dual fit synthetic rubber finger seal outlet A1 rated Can be installed above or below the flood level of connecting appliances.

McAlpine VP100E Ventapipe 100 Internal/external For 4" Pipe Black

The VP100E is an innovative valve suitable for internal and external use. It is easy installation as it has a simple push-fit connection. The product stops bad smells that can occur from negative pressures.

McAlpine WV-1 Space Saver With Self-closing Waste Valve 1½ X 1½

Bath Space-saver. 1½” BSP female inlet nut x 1½” universal compression outlet.

McAlpine WHB-1 Space Saver With Self-Closing Waste Valve 1¼ X 1¼

Wash Hand Basin Space-saver. 1¼” BSP female inlet nut x 1¼” universal compression outlet

McAlpine VP15M Ventapipe 15 With 1¼ Universal Outlet

1¼” Universal Outlet

McAlpine VP3 Ventapipe 25 With Integral 1½ Multi Fit Tee

1½” Multifit Tee

McAlpine VP2W Ventapipe 25 With 1½ Universal Outlet White

1½” Universal Outlet A1 rated

McAlpine VP2 Ventapipe 25 With 1½ Universal Outlet Grey

½” Universal Outlet A1 rated

McAlpine VPSF-40/50 Ventapipe 40/50 For Fits 1¼ 1½ & 2" Waste Pipe

Fits 1¼”, 1½” and 2″ waste pipe Solvent weld Outlet

McAlpine VP50 Ventapipe 50 With 2" Universal Outlet

2″ Universal Outlet

McAlpine VP50P Ventapipe 50 For 3" & 4" Pipe

Fits 3″/75mm or 4″/110mm soil pipe Dual fit synthetic rubber finger seal outlet

McAlpine VP100N Ventapipe 100 With Solvent Weld Outlet For 4" Pipe

Fits 4″/110mm soil pipe Solvent weld Outlet  

McAlpine VP100 Ventapipe 100 For 3" Or 4" Soil Pipe

Fits 3″/75mm or 4″/110mm soil pipe Dual fit synthetic rubber finger seal outlet

McAlpine TUN5-CL Tunvalve Straight Through (Clear) 19/23mm

This non-return valve may be installed to take the discharge condensate from a boiler, air conditioning unit or cold water cistern when the discharge is being installed into a waste or soil pipe. The non-return valve will prevent foul odour entering the building

McAlpine C10AR-CP Chrome Plated Plastic Resealing Adjustable Inlet Bottle Trap 1½

75mm Water Seal Multifit Compression Outlet suits all plastic, copper and lead pipes Adjustable Inlet makes trap suitable for all domestic repair, maintenance and improvement work

McAlpine C10AR Resealing Adjustable Inlet Bottle Trap 1½

75mm Water Seal Multifit Compression Outlet suits all plastic, copper and lead pipes Adjustable Inlet makes trap suitable for all domestic repair, maintenance and improvement work

McAlpine A10AR-CP Chrome Plated Plastic Resealing Adjustable Inlet Bottle Trap 1¼

75mm Water Seal Multifit Compression Outlet suits all plastic, copper and lead pipes Adjustable Inlet makes trap suitable for all domestic repair, maintenance and improvement work The simple non-mechanical action ensures retention of adequate water seal even under extreme syphonic conditions

McAlpine ASA10 Adjustable Inlet Tubular Swivel 'p' Trap 1¼

The McAlpine ASA10 Adjustable Inlet Tubular Swivel ‘P’ Trap 1¼" is a versatile and easy-to-install waste trap designed to prevent unpleasant sink odours. Featuring a 75mm water seal and adjustable inlet, it is ideal for a wide range of domestic plumbing applications. With a Multifit outlet compatible with plastic, copper, and lead pipes, it provides a reliable and flexible installation solution.

Regin Radiator Bleeder Set REGR18

REGR18 – Radiator Bleeder Set  

Regin Free-Air Gauge Kit REGK75

REGK75 - Free-Air Gauge Kit  

Regin Hook & Pick Set REGK40

Regin Hook & Pick Set is a versatile five piece tool set designed for precision work where small components, seals and fittings need to be removed, positioned or marked. Manufactured from chrome vanadium steel, the set provides strength and durability for regular professional use. It is particularly useful for replacing O rings, marking tools, removing small fuses and freeing stuck or awkward parts. The compact design makes it a practical addition to a plumber's, heating engineer's or maintenance technician's toolbox, providing a selection of useful picks and hooks for detailed work.

MacDonald Plumbing Supplies MacVent 15mm Auto Air Vent Compression

The MacVent 15mm Auto Air Vent Compression offers a high-quality solution to prevent trapped air in heating systems. Built from premium materials, it operates efficiently under pressures up to 10 bar and temperatures up to 100°C, providing consistent and reliable performance in residential and commercial heating applications.