MacDonald Plumbing Supplies Refill For The MacPack Press Starter Kit For Water 22mm Fittings

The Refill For The MacPack Press Pack For Water 22mm. This refill kit is tailor-made for plumbing professionals who use the MacPress system and need a fresh supply of premium 22mm copper press fittings. Designed for use in potable water, sealed heating systems, and hot water circuits, every fitting is WRAS approved and made for secure, flame-free installation. The pack includes elbows, couplings, equal tees, reducers, and reducing tees – all engineered for reliability and leak-free performance. Supplied in quantities that suit real-world installation demands, this refill pack is a smart, timesaving addition to your MacPack setup. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPack Press Starter Kit For Water 22mm Fittings

The MacPack Press Pack For Water 22mm Fittings is your complete solution for fast, safe, and professional-grade water installations. Designed around the industry-trusted MacPress M-profile press system, this pack includes a hand-picked selection of high-quality 22mm fittings, ideal for use in potable water, heating, and hot water systems. Engineered for clean, flame-free installation, the fittings require no solder, flux, or compound making them perfect for both domestic and commercial environments. Each component is WRAS approved and backed by a 20-year manufacturer’s warranty, ensuring a secure and long-lasting fit every time. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies Refill For The MacPack Press Starter Kit For Water 15mm Fittings

The MacPack Press Refill Pack For Water 15mm Fittings is ideal for topping up your stock of the most-used water press fittings. Designed to match the quality and compatibility of MacPress M profile fittings, this refill pack ensures you always have essential components on hand. With a practical selection of 15mm couplings, elbows, tees, reducers, and reducing tees, it's perfect for professionals working on potable water, hot water, and heating installations. These flame-free fittings provide a fast, clean and safe solution with reliable performance. Fully WRAS approved and BS EN compliant, this pack keeps your installations efficient and up to standard. Not suitable for use with MLCP pipe and fittings. Installation Instructions for Press Fittings 1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPack Press Starter Kit For Water 15mm Fittings

The MacPack Press Pack For Water 15mm Fittings is a purpose-built solution designed for fast, safe, and clean water installations. Ideal for both domestic and commercial applications, this all-in-one pack contains a selection of premium 15mm MacPress water press fittings including couplings, elbows, tees, reducers, and reducing tees. Thanks to its flame-free installation process, it eliminates the need for hot works while maintaining a high standard of performance and safety. Every fitting uses the reliable “M” profile for secure press connections. The included fittings are WRAS approved and manufactured to meet the highest quality and compliance standards. Backed by a 20-year manufacturer’s warranty, this pack offers peace of mind and long-term durability. Installation Instructions for Press Fittings  1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies Refill For The MacPack Press Starter Kit For Gas

The Refill For The MacPack Press Starter Pack For Gas is designed to replenish your MacPress Starter Pack 1 with essential components for ongoing gas system installations. It includes 90 fittings to ensure your projects run smoothly and efficiently. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPack Press Starter Kit For Gas

Top up your MacPress fitting stock with the MacPack Press Refill Pack For Water – 15mm Fittings, designed for professional installers who value speed, safety, and simplicity. This refill pack includes 105 premium-quality 15mm M Profile press fittings for water applications – all neatly stored in a robust FatMac case for easy access on-site. Suitable for potable water, heating, and hot water systems, each fitting is WRAS Approved and compatible with standard copper tube. Perfect for topping up your MacPress Water Starter Pack or expanding your on-the-go fitting kit. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies Refill For The MacPack Press Starter Kit For Water

The Refill For The MacPack Press Starter Pack For Water provides a comprehensive, professional-grade selection of MacPress M-profile press fittings. Specially curated for potable water and heating systems, this refill pack ensures you have the most commonly used fittings readily available for seamless installation work. From elbows and couplings to equal tees and reducers, each component in this pack is engineered for flame-free, WRAS-approved connections that deliver long-term leak-free performance. Designed to work flawlessly with copper pipe, the refill pack offers dependable quality for installers who demand reliability, efficiency, and peace of mind. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPack Press Starter Kit For Water

The MacPack Press Starter Pack For Water is a comprehensive solution for plumbing professionals working on water system installations. This starter pack includes an essential selection of WRAS Approved MacPress fittings designed for domestic and commercial water applications, including potable water, heating, and hot water systems. All fittings feature a high-performance M-Profile design that ensures fast, secure, and flame-free connections. With no need for hot works, this kit saves time on-site while ensuring full compliance with BS EN standards. Supplied in a durable FatMac case, the pack is ideal for installers looking for reliable, professional-grade fittings. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Equal Tee 22mm - WATER

The MacPress 22mm Equal Tee is a WRAS approved press fitting ideal for connecting three equal pipe runs in water, heating, and potable systems. M-Profile design for reliable, professional installations.   Installation Instructions for Press Fittings 1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Slip Coupling 22mm - WATER

The MacPress Slip Coupling 22mm is a WRAS approved press fitting designed for quick, secure pipe repairs and connections on hot water, heating, and potable water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Equal Tee 15mm - WATER

The MacPress 15mm Equal Tee is a WRAS approved press fitting ideal for connecting three equal pipe runs in water, heating, and potable systems. M-Profile design for reliable, professional installations.   Installation Instructions for Press Fittings 1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Slip Coupling 15mm - WATER

The MacPress Slip Coupling 15mm is a WRAS approved press fitting designed for quick, secure pipe repairs and connections on hot water, heating, and potable water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Elbow 22mm - WATER

The MacPress 22mm Elbow is a high-quality press fitting designed for heating, hot water, and potable water systems. WRAS approved and M-profile – trusted by professionals for secure, leak-free joints. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Coupling 22mm - WATER

The MacPress 22mm Coupling is a reliable M-Profile press fitting suitable for water, heating, and potable applications. WRAS approved and built for professional use, it's perfect for quick, leak-free installations.     Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Fitting Reducer 22mm x 15mm - WATER

The MacPress Fitting Reducer 22mm x 15mm offers a seamless and secure reduction between pipe sizes in heating, hot water, and potable water systems. WRAS approved and M-profile design for leak-free reliability. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Elbow 15mm - WATER

The MacPress 15mm Elbow is a high-quality press fitting designed for heating, hot water, and potable water systems. WRAS approved and M-profile – trusted by professionals for secure, leak-free joints. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Coupling 15mm - WATER

The MacPress 15mm Coupling is a reliable M-Profile press fitting suitable for water, heating, and potable applications. WRAS approved and built for professional use, it's perfect for quick, leak-free installations.   Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.