MacDonald Plumbing Supplies Brass ¾ Cap

The Brass 3/4" Cap is a reliable fitting designed to seal off pipe ends in plumbing and heating systems. Manufactured from durable brass, it provides a secure and leak-free connection using a simple compression fitting. Ideal for both temporary and permanent applications, it ensures dependable performance in a wide range of installations.

MacDonald Plumbing Supplies MacValve WRAS Remote Filling Loop Part L Compliant with Gauge

The MacValve WRAS Remote Filling Loop Part L Compliant with Gauge is a practical and compliant solution for filling and pressurising central heating systems and heat interface units. Designed for flexible installation, it can be fitted remotely from the boiler or cylinder, making it ideal where access is limited or no integral pressure gauge is present. Supplied complete with a gauge and essential safety components, it ensures accurate pressure monitoring and safe system operation.

MacDonald Plumbing Supplies Thermostatic Mixing Valve 22mm WRAS Approved TMV22

The Thermostatic Mixing Valve 22mm WRAS Approved TMV22 is designed to ensure safe and reliable water temperature regulation in both domestic and commercial plumbing systems. This high-performance valve blends hot and cold water to deliver a consistent, pre-set temperature, preventing the risk of scalding. Fully WRAS approved and compliant with TMV2 standards, the TMV22 is perfect for larger systems, including communal bathrooms, healthcare facilities, and care homes. It features 22mm compression ends, internal check valves, and strainers for maximum safety and performance.

MacDonald Plumbing Supplies MacPress 22mm Red/Blue Lever Valves M Profile WRAS Approved

The MacPress 22mm Red/Blue Lever Valves M Profile are WRAS approved, offering reliable water flow control for press fit plumbing systems. Featuring convenient red and blue lever handles, they ensure easy operation and compliance with regulatory standards. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 15mm Red/Blue Lever Valves M Profile WRAS Approved

The MacPress 15mm Red/Blue Lever Valves M Profile are WRAS approved, offering reliable water flow control for press fit plumbing systems. Featuring convenient red and blue lever handles, they ensure easy operation and compliance with regulatory standards. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Long Tail Drain Off Valve Type A 15mm

The MacPress Long Tail Drain Off Valve Type A 15mm offers efficient drainage for gas, LPG, and fuel oil systems. Approved by British Gas to EN 331 standards, this durable valve is ideal for residential and commercial applications, providing reliable performance in demanding environments.     Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.