MacDonald Plumbing Supplies MacPress Straight Jaws Case

The MacPress Straight Jaws Case is a durable storage solution designed to safely store and transport MacPress straight press jaws. Manufactured to fit all MacPress straight jaws, it helps keep your equipment organised, protected, and readily accessible on site or in the workshop. Ideal for professional installers, this robust case protects valuable press jaws from damage, dirt, and moisture during transport and storage.

MacDonald Plumbing Supplies NovoPress ACO103 c/w MacPress 15mm, 22mm & 28mm Standard M Profile Jaws (NB3)

The NovoPress ACO103 c/w MacPress 15mm, 22mm & 28mm Standard M Profile Jaws is a reliable and efficient press tool kit designed for everyday plumbing installations. Supplied with the most commonly used jaw sizes, along with batteries, charger, and carry case, it offers a practical and cost-effective solution for professional installers. We have sold over 400 sets of MacPress Jaws in the last 9 months & customer feedback has been amazing - They are the perfect fit for NovoPress ACO102 & ACO103 making this bundle a great value price! PLEASE NOTE: These Jaws are not Official Approved NovoPress as they sell their own version  

MacDonald Plumbing Supplies Brass ¾ Cap

The Brass 3/4" Cap is a reliable fitting designed to seal off pipe ends in plumbing and heating systems. Manufactured from durable brass, it provides a secure and leak-free connection using a simple compression fitting. Ideal for both temporary and permanent applications, it ensures dependable performance in a wide range of installations.

Press Mate Pro Press Lubrication 150ml

The Press Mate Pro Press Lubrication 150ml is a professional-grade dry lubricant designed to improve the performance and longevity of press tools. Formulated with natural oils, it delivers smoother, more consistent crimps while protecting seals and O-rings from damage. Suitable for most press jaws, it reduces friction, wear and drag, helping engineers achieve reliable results with minimal mess on every job.

Rob Pond PressFit 22mm Perfect Pump Valve Pair

The Rob Pond PressFit 22mm Perfect Pump Valve Pair PPV22-PF provides a reliable and efficient solution for connecting circulating pumps in heating systems. Designed with 22mm M profile press connections and 1½" swivel unions, these valves allow quick installation and secure pump isolation. Manufactured from durable nickel plated brass and rated to 16 bar, they offer excellent strength and long-term reliability. Supplied as a matched pair with rubber washers, they ensure a tight seal and simplify installation for professional heating engineers.

MacDonald Plumbing Supplies MacCompression 22mm Slip Coupling

The MacCompression 22mm Slip Couplings provide a dependable solution for repairing or extending 22mm pipework where movement is limited or access is restricted. Designed with a slip function, these couplings slide along the pipe to bridge gaps or replace damaged sections without requiring pipe disassembly. Manufactured to BS EN 1254-2 standards and WRAS approved, they are suitable for potable water systems and professional plumbing installations. Supplied complete with copper olives, they ensure a secure, watertight seal and reliable long term performance.

MacDonald Plumbing Supplies MacCompression 15mm Slip Coupling

The MacCompression 15mm Slip Coupling is a practical and dependable solution for repairing or extending 15mm pipework without the need for additional pipe movement. Designed for ease of installation, this coupling slides along the pipe to bridge gaps or replace damaged sections, making it ideal for maintenance, repair, and retrofit plumbing tasks. Manufactured to BS EN 1254-2 standards and WRAS approved, it ensures reliable performance and suitability for potable water systems. Supplied complete with copper olives, it provides a secure, watertight seal for professional and long lasting installations.

MacDonald Plumbing Supplies MacCompression Reducing Coupling Poly P25 x 22mm

The MacCompression Reducing Coupling Poly P25 x 22mm is designed to connect 25mm MDPE pipe to 22mm pipework quickly and securely. Manufactured from high quality poly material, this compression fitting provides a dependable solution for reducing pipe sizes in cold water supply installations. Kitemarked and WRAS Approved, it meets recognised UK standards for potable water use, making it suitable for both domestic and commercial applications. Its robust construction ensures a long service life, even in demanding ground level or external environments.

MacDonald Plumbing Supplies MacPress TH Profile Jaw 4 Piece Kit 16mm 20mm 26mm 32mm

The MacPress TH Profile Jaw 4 Piece Kit 16mm 20mm 26mm 32mm is a complete set of TH profile jaws designed for use with the PZ-1930 & MP-1930 press tool. Covering the most commonly used pipe sizes, this kit ensures precise and reliable pressing for multilayer composite pipes (MLCP) in both hot and cold water systems. Ideal for domestic, commercial, and industrial installations, the set allows installers to switch quickly between sizes, maintaining consistent press quality and efficiency. Built to professional standards, these jaws provide durability, accuracy, and long-term performance on every job.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress U Profile 25mm For PZ-1550

The MacPress U Profile 25mm For PZ-1550 is a precision engineered press jaw designed for creating strong and dependable U profile connections on 25mm multilayer and MLCP pipework. Made for use exclusively with the PZ-1550 press tool when fitted with the correct head adaptor, it offers reliable performance across domestic, commercial and industrial installations. With its sturdy build, smooth operation and accurate pressing action, this jaw ensures consistent, leak free joints in heating, hot and cold water and multilayer pipe systems.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress U Profile 32mm For PZ-1550

The MacPress U Profile 32mm For PZ-1550 is a heavy duty press jaw designed for producing secure and accurate U profile connections on 32mm multilayer and MLCP pipework. Built for use exclusively with the PZ-1550 press tool and its matching head adaptor, this jaw provides reliable performance across domestic, commercial and industrial installations. Its robust construction, smooth operation and consistent pressing force make it ideal for larger diameter multilayer pipelines, heating systems and hot and cold water services where a dependable and leak free connection is essential.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress V Profile Jaw 22mm For PZ-1930 & MP-1930

The MacPress V Profile Jaw 22mm For PZ-1930 & MP-1930 is a professional-grade jaw designed specifically for pressing 22 mm V-profile fittings. Compatible with the PZ-1930 & MP-1930 Z-Press tool, it allows installers to swap quickly between pipe sizes, improving workflow efficiency. Ideal for underfloor heating, central heating, and hot water systems, this jaw ensures secure, leak-free connections. Suitable for copper, stainless steel, and PEX pipes, it is an essential tool for professional installers requiring reliable performance and precise press-fit results.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress V Profile Jaw 28mm For PZ-1930 & MP-1930

The MacPress V Profile Jaw 28mm For PZ-1930 & MP-1930 is a precision-engineered jaw designed for pressing 28 mm V-profile fittings. Compatible with the PZ-1930 & MP-1930 Z-Press tool, it allows installers to switch quickly between pipe sizes, improving workflow efficiency on site. Ideal for underfloor heating, central heating, and hot water systems, this jaw ensures secure, leak-free connections. Suitable for copper, stainless steel, and PEX pipe, it is a trusted accessory for professional installers requiring accuracy, durability, and consistent press-fit results.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress M Profile Jaw Adaptor for PZ-1550

MacDonald Plumbing Supplies MacPress M Profile Jaw 15mm For PZ-1550

The MacPress M Profile Jaw 15mm For PZ-1550 is engineered for direct use with the PZ-1550 Z-PRESS hydraulic battery press tool, eliminating the need for a jaw adaptor. Designed for forming accurate and secure M-profile press connections on 15 mm copper press fittings, it offers smooth operation and dependable performance for professional installers. Its robust construction and precise fit ensure consistent, leak-free results across heating, hot water and general plumbing applications. Ideal for on-site efficiency, this jaw supports quick changes and reliable pressing every time.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress M Profile Jaw 22mm For PZ-1550

The MacPress M Profile Jaw 22mm For PZ-1550 is a precision engineered jaw designed for direct use with the PZ-1550 hydraulic battery press tool. With no adaptor required, it enables fast, accurate and secure pressing of 22 mm M-profile copper fittings. Built for professional performance, this jaw ensures uniform deformation of fittings, producing strong, dependable and leak-free joints across heating, hot water and general plumbing installations. Its durable construction and quick-change design make it ideal for busy installers who need reliable results on every job.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress M Profile Jaw 28mm For PZ-1550

The MacPress M Profile Jaw 28mm For PZ-1550 is a professional-grade jaw designed for direct use with the PZ-1550 hydraulic battery press tool, requiring no adaptor. It is ideal for pressing 28 mm M-profile copper fittings, providing accurate, secure, and leak-free joints. This jaw is built for durability and consistent performance, making it suitable for domestic, commercial, and industrial plumbing applications, including heating and hot water systems. Its quick-fit design allows fast jaw changes to improve installation efficiency on site.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress M Profile Jaw 35mm For PZ-1550

The MacPress M Profile Jaw 35mm For PZ-1550 is a precision-engineered jaw designed for direct use with the PZ-1550 hydraulic battery press tool. Eliminating the need for an adaptor, it allows installers to create secure, leak-free connections on 35 mm M-profile copper fittings efficiently. Built for professional trade use, this jaw provides consistent, accurate pressing across heating, hot water, and general plumbing applications, ensuring reliability and high-quality results on every job.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress M Profile Jaw 42mm For PZ-1550

The MacPress M Profile Jaw 42mm For PZ-1550 is a high-quality pressing jaw designed for direct use with the PZ-1550 hydraulic battery press tool, requiring no adaptor. It enables precise and reliable pressing of 42 mm M-profile copper fittings, delivering secure, leak-free connections for heating, hot water, and general plumbing installations. Built for professional installers, it ensures consistent performance, efficiency on site, and long-term durability.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress M Profile Jaw 54mm For PZ-1550

The MacPress M Profile Jaw 54mm For PZ-1550 is a professional-grade pressing jaw designed for direct use with the PZ-1550 hydraulic battery press tool, requiring no adaptor. It provides precise and secure pressing for 54 mm M-profile copper fittings, ensuring strong, leak-free connections for heating, hot water, and general plumbing applications. Engineered for durability and efficiency, it is ideal for professional installers seeking consistent performance and reliable results on every job.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress M Profile Jaw 7 Piece Kit 15mm - 54mm for PZ-1550 Inc. Adaptor

The MacPress M Profile Jaw 7 Piece Kit 15mm - 54mm for PZ-1550 Inc. Adaptor is a comprehensive set designed for professional installers working with M-profile copper fittings. Compatible with the PFTOOL1554, this kit includes six jaw sizes (15mm, 22mm, 28mm, 35mm, 42mm, 54mm) and a jaw adaptor, allowing seamless use with the PZ-1550 press tool. Ideal for heating, hot water, and general plumbing applications, it provides quick jaw changes, reliable performance, and leak-free press connections for all common M-profile pipe sizes. For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress U Profile 16mm For PZ-1550

The MacPress U Profile 16mm For PZ-1550 is a high quality press jaw designed specifically for creating secure U profile press connections on 16mm multilayer and MLCP pipework. Used exclusively with the PZ-1550 press tool when fitted with the correct head adaptor, this jaw offers dependable performance across domestic, commercial and industrial installations. Its precision engineering ensures strong and reliable crimps, making it ideal for hot and cold water systems, heating circuits and multilayer pipe applications.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress U Profile 20mm For PZ-1550

The MacPress U Profile 20mm For PZ-1550 is a professional grade press jaw designed for accurate and reliable U profile pressing on 20mm multilayer and MLCP pipework. Built for use exclusively with the PZ-1550 press tool when fitted with the appropriate head adaptor, it ensures secure and consistent connections across domestic, commercial and industrial installations. Its robust construction and precise pressing action make it ideal for hot and cold water services, heating systems and multilayer pipe applications where dependable performance is essential.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress V Profile Jaw 15mm For PZ-1930 & MP-1930

The MacPress V Profile Jaw 15mm For PZ-1930 & MP-1930 is a specialised jaw designed for pressing 15 mm V-profile fittings. Easily attached to the PZ-1930 & MP-1930 Z-Press tool, it allows for quick swaps between pipe sizes, improving workflow efficiency on site. Ideal for underfloor heating, central heating, and hot water systems, this jaw ensures leak-free connections and consistent performance. Compatible with copper, stainless steel, and PEX pipe, it is a trusted choice for professional installers seeking precision and reliability in HVAC and plumbing applications.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress Angled Jaws Case c/w 180 Degree Adaptor 15mm 22mm 28mm & 35mm M Profile Jaws

The MacPress Angled Jaws Case c/w 180 Degree Adaptor 15mm 22mm 28mm & 35mm M Profile Jaws is a complete professional kit designed for installers who need maximum flexibility in tight or awkward spaces. Including 15 mm, 22 mm, 28 mm, and 35 mm M profile angled jaws along with a 180 Degree Adaptor, this kit enables secure and consistent press connections on copper pipework in plant rooms, boiler cupboards, and other restricted areas. All components are supplied in a robust MacPress case for protection, organisation, and ease of transport, making it ideal for both domestic and commercial applications.     For more information, please follow the link here   Compatibility information, please follow the link here  

MacDonald Plumbing Supplies MacPress Angled Jaws Case c/w 180 Degree Adaptor 15mm 22mm & 28mm M Profile Jaws

The MacPress Angled Jaws Case c/w 180 Degree Adaptor 15mm 22mm & 28mm M Profile Jaws is a comprehensive kit designed for professional installers requiring precision and versatility in tight or restricted spaces. This set includes 15 mm, 22 mm, and 28 mm M profile angled jaws along with a 180 Degree Adaptor, enabling secure and consistent press connections on copper pipework in plant rooms, boiler cupboards, or close to walls. Housed in a robust MacPress case, the kit ensures all components are protected, organised, and easily transportable, making it ideal for efficient, high-quality installations across domestic and commercial applications.     For more information, please follow the link here   Compatibility information, please follow the link here  

MacDonald Plumbing Supplies MacPress Angled Jaws Case

The MacPress Angled Jaws Case provides a robust and practical storage solution for professional plumbers using the MacPress system. Purpose-built to hold up to two 180° adaptors and four MacPress jaws, this heavy-duty carry case ensures all components are stored securely and remain protected during transport or on-site use. Made from high-strength plastic with reinforced hinges and metal clasps, the case keeps your tools organised, safe, and ready for immediate access. Designed for convenience and durability, it’s the ideal companion for maintaining your MacPress equipment in perfect working order.

Novopress ACO103 "M" Profile Angled Jaw 15mm & 22mm Adaptor Set with Case

The Novopress ACO103 "M" Profile Angled Jaw 15mm & 22mm Adaptor Set is a professional-grade jaw kit designed for use with the Novopress ACO103 press tool. Engineered for secure and consistent M profile press connections, this set allows reliable pressing of 15mm and 22mm copper press fittings used in domestic and commercial pipework. The angled jaw design offers improved access in restricted and awkward spaces, making it ideal for installations in plant rooms, behind boilers, and near walls. Supplied in a durable carry case, the adaptors are safely stored and easy to transport between jobs. This set is built for professional reliability and long-term use.

MacDonald Plumbing Supplies MacCompression Liners for MDPE 25mm

The MacCompression Liners for MDPE 25mm are designed to provide added strength, security, and reliability when using MDPE compression fittings. Manufactured to a high standard, these pipe liners are both WRAS Approved and Kitemarked, ensuring compliance and performance in potable water applications. By reinforcing the inner wall of the MDPE pipe, they help prevent pipe deformation under compression, guaranteeing a safe and leak-free connection. Trusted by installers, these liners offer peace of mind for long-term durability in underground and above-ground installations.

MacDonald Plumbing Supplies Refill For The MacPack Press Starter Kit For Water 22mm Fittings

The Refill For The MacPack Press Pack For Water 22mm. This refill kit is tailor-made for plumbing professionals who use the MacPress system and need a fresh supply of premium 22mm copper press fittings. Designed for use in potable water, sealed heating systems, and hot water circuits, every fitting is WRAS approved and made for secure, flame-free installation. The pack includes elbows, couplings, equal tees, reducers, and reducing tees – all engineered for reliability and leak-free performance. Supplied in quantities that suit real-world installation demands, this refill pack is a smart, timesaving addition to your MacPack setup. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPack Press Starter Kit For Water 22mm Fittings

The MacPack Press Pack For Water 22mm Fittings is your complete solution for fast, safe, and professional-grade water installations. Designed around the industry-trusted MacPress M-profile press system, this pack includes a hand-picked selection of high-quality 22mm fittings, ideal for use in potable water, heating, and hot water systems. Engineered for clean, flame-free installation, the fittings require no solder, flux, or compound making them perfect for both domestic and commercial environments. Each component is WRAS approved and backed by a 20-year manufacturer’s warranty, ensuring a secure and long-lasting fit every time. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies Refill For The MacPack Press Starter Kit For Water 15mm Fittings

The MacPack Press Refill Pack For Water 15mm Fittings is ideal for topping up your stock of the most-used water press fittings. Designed to match the quality and compatibility of MacPress M profile fittings, this refill pack ensures you always have essential components on hand. With a practical selection of 15mm couplings, elbows, tees, reducers, and reducing tees, it's perfect for professionals working on potable water, hot water, and heating installations. These flame-free fittings provide a fast, clean and safe solution with reliable performance. Fully WRAS approved and BS EN compliant, this pack keeps your installations efficient and up to standard. Not suitable for use with MLCP pipe and fittings. Installation Instructions for Press Fittings 1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPack Press Starter Kit For Water 15mm Fittings

The MacPack Press Pack For Water 15mm Fittings is a purpose-built solution designed for fast, safe, and clean water installations. Ideal for both domestic and commercial applications, this all-in-one pack contains a selection of premium 15mm MacPress water press fittings including couplings, elbows, tees, reducers, and reducing tees. Thanks to its flame-free installation process, it eliminates the need for hot works while maintaining a high standard of performance and safety. Every fitting uses the reliable “M” profile for secure press connections. The included fittings are WRAS approved and manufactured to meet the highest quality and compliance standards. Backed by a 20-year manufacturer’s warranty, this pack offers peace of mind and long-term durability. Installation Instructions for Press Fittings  1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress 32mm U Profile Ring Jaw Use With 180° Adaptor

The MacDonald Plumbing Supplies 32mm U Profile Ring Jaw is designed for secure and precise press-fit installations using U profile fittings and 32mm MLCP (multi-layer composite) pipe. Built for compatibility with leading press tools, this jaw delivers a strong, consistent press every time. Manufactured from high-quality hardened steel, it offers durability and reliability under regular site use. Whether you're working on domestic or commercial pipework systems, this ring jaw ensures professional results when installing MLCP fittings.   For more information, please follow the link here   Compatibility information, please follow the link here  

MacDonald Plumbing Supplies MacPress 25mm U Profile Ring Jaw Use With 180° Adaptor

The MacDonald Plumbing Supplies 25mm U Profile Ring Jaw is designed for secure and precise press-fit installations using U profile fittings and 25mm MLCP (multi-layer composite) pipe. Built for compatibility with leading press tools, this jaw delivers a strong, consistent press every time. Manufactured from high-quality hardened steel, it offers durability and reliability under regular site use. Whether you're working on domestic or commercial pipework systems, this ring jaw ensures professional results when installing MLCP fittings.   For more information, please follow the link here   Compatibility information, please follow the link here  

MacDonald Plumbing Supplies MacPress 20mm U Profile Ring Jaw Use With 180° Adaptor

The MacDonald Plumbing Supplies 20mm U Profile Ring Jaw is designed for secure and precise press-fit installations using U profile fittings and 20mm MLCP (multi-layer composite) pipe. Built for compatibility with leading press tools, this jaw delivers a strong, consistent press every time. Manufactured from high-quality hardened steel, it offers durability and reliability under regular site use. Whether you're working on domestic or commercial pipework systems, this ring jaw ensures professional results when installing MLCP fittings.   For more information, please follow the link here   Compatibility information, please follow the link here  

MacDonald Plumbing Supplies MacPress 16mm U Profile Ring Jaw Use With 180° Adaptor

The MacDonald Plumbing Supplies 16mm U Profile Ring Jaw is designed for secure and precise press-fit installations using U profile fittings and 16mm MLCP (multi-layer composite) pipe. Built for compatibility with leading press tools, this jaw delivers a strong, consistent press every time. Manufactured from high-quality hardened steel, it offers durability and reliability under regular site use. Whether you're working on domestic or commercial pipework systems, this ring jaw ensures professional results when installing MLCP fittings.    For more information, please follow the link here   Compatibility information, please follow the link here  

MacDonald Plumbing Supplies MacPress TH Profile Jaw 20mm For PZ-1930 & MP-1930

The MacPress TH Profile Jaw 20mm For PZ-1930 & MP-1930 is a durable and precise jaw designed for pressing 20 mm multilayer composite pipes (MLCP). Engineered for use with the Z-PRESS PZ-1930 & MP-1930 head adaptor and compatible with the NovoPress ACO103, this jaw provides consistent and secure crimps for both hot and cold water systems. Suitable for domestic, commercial, and industrial applications, it delivers reliable performance and long-lasting durability, making it an essential accessory for professional installers who require accuracy and efficiency in every press-fit installation.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress TH Profile Jaw 26mm For PZ-1930 & MP-1930

The MacPress TH Profile Jaw 26mm For PZ-1930 & MP-1930 is a robust and precise jaw designed for crimping 26 mm multilayer composite pipes (MLCP). Compatible with the Z-PRESS PZ-1930 & MP-1930 head adaptor and NovoPress ACO103, it ensures secure and consistent crimps for both hot and cold water applications. Built for durability and professional use, this jaw delivers reliable performance across domestic, commercial, and industrial installations. It is an essential tool for installers who require accuracy, efficiency, and long-lasting results in their press-fit projects.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress TH Profile Jaw 32mm For PZ-1930 & MP-1930

The MacPress TH Profile Jaw 32mm For PZ-1930 & MP-1930 is a professional-grade jaw designed for precise crimping of 32 mm multilayer composite pipes (MLCP). Engineered for use with the Z-PRESS PZ-1930 & MP-1930 head adaptor and compatible with the NovoPress ACO103, it provides secure and consistent crimps for both hot and cold water systems. Suitable for domestic, commercial, and industrial installations, this jaw offers durability and reliable performance, making it an essential tool for installers who demand accuracy, efficiency, and long-lasting results in every press-fit application.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress TH Profile Jaw 16mm For PZ-1930 & MP-1930

The MacPress TH Profile Jaw 16mm For PZ-1930 & MP-1930 is a robust and reliable jaw designed for precise pressing of 16 mm multilayer composite pipes (MLCP). Engineered for use with the Z-PRESS PZ-1930 & MP-1930 head adaptor and compatible with the NovoPress ACO103, it provides consistent, high-quality crimps for hot and cold water systems. Suitable for domestic, commercial, and industrial installations, this jaw ensures reliable performance and long-term durability, making it an essential tool for professionals who demand accuracy, efficiency, and compatibility in their press-fit applications.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress U Profile Jaw 25mm For PZ-1930 & MP-1930

The MacPress U Profile Jaw 25mm For PZ-1930 & MP-1930 is a high-quality pressing jaw designed for secure and accurate installation of 25 mm multilayer pipe systems. Built for efficiency on busy job sites, it plugs directly into the PZ-1930 & MP-1930 press tool and locks firmly using the swivel pin mechanism. This makes it easy to change jaws quickly while working across different pipe sizes. Perfect for MLCP heating and hot water applications, it ensures strong, reliable and leak-free U-profile connections every time.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress U Profile Jaw 32mm For PZ-1930 & MP-1930

The MacPress U Profile Jaw 32mm For PZ-1930 & MP-1930 is a robust and precise pressing jaw designed for forming secure U-profile connections on 32 mm multilayer pipe systems. It is purpose-built to slot directly into the PZ-1930 & MP-1930 press tool and lock firmly into place using the swivel pin mechanism, allowing installers to switch between jaw sizes quickly and efficiently. Ideal for larger MLCP heating and hot water installations, this jaw delivers consistent, leak-free performance and dependable results for professional plumbing and HVAC work.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress U Profile Jaw 20mm For PZ-1930 & MP-1930

The MacPress U Profile Jaw 20mm For PZ-1930 & MP-1930 is engineered for creating strong, accurate and leak-free press connections on 20 mm multilayer pipe systems. Designed to slot straight into the PZ-1930 & MP-1930 press tool and lock securely with the swivel pin, it allows quick jaw changes to maintain efficient workflow on site. Ideal for heating, hot water and general MLCP installations, this jaw delivers reliable performance and consistent results for professional tradespeople.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress U Profile Jaw 16mm For PZ-1930 & MP-1930

The MacPress U Profile Jaw 16mm For PZ-1930 & MP-1930 is designed for creating accurate and reliable press connections on 16 mm multilayer pipe systems. This jaw plugs directly into the PZ-1930 & MP-1930 press tool and locks securely using the swivel pin, allowing quick and simple changes between pipe sizes during installation. Ideal for applications where a dependable, leak-free joint is essential, it offers speed, convenience and consistent performance across a wide range of MLCP projects.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies NovoPress ACO103 c/w MacPress 15mm, 22mm, 28mm & 35mm Standard M Profile Jaws PLUS MacPress adaptor, 15mm, 22mm, 28mm, & 35mm Angled Jaws (NB2)

The NovoPress ACO103 c/w MacPress 15mm, 22mm, 28mm & 35mm Standard M Profile Jaws PLUS MacPress Adaptor & Angled Jaws is a comprehensive pressing solution designed for maximum versatility and performance. Supplied with both standard and 180° angled jaws, adaptor, batteries, charger, and carry case, this kit allows efficient and precise pipe installations, even in confined spaces. We have sold over 400 sets of MacPress Jaws in the last 9 months & customer feedback has been amazing - They are the perfect fit for NovoPress ACO102 & ACO103 making this bundle a great value price! PLEASE NOTE: These Jaws are not official NovoPress as they sell their own version

MacDonald Plumbing Supplies NovoPress ACO103 c/w MacPress 15mm, 22mm, 28mm & 35mm Standard M Profile Jaws (NB1)

The NovoPress ACO103 c/w MacPress 15mm, 22mm, 28mm & 35mm Standard M Profile Jaws is a complete pressing solution designed for fast, efficient, and reliable pipe installations. Supplied with batteries, charger, carry case, and a full set of MacPress M Profile jaws, this kit is ideal for professional plumbers looking for a versatile and cost-effective press tool system. We have sold over 400 sets of MacPress Jaws in the last 9 months & customer feedback has been amazing - They are the perfect fit for NovoPress ACO102 & ACO103 making this bundle a great value price! PLEASE NOTE: These Jaws are not Official Approved NovoPress as they sell their own version

MacDonald Plumbing Supplies MacPress TH Profile Jaw 20mm For PZ-1550

The MacPress TH Profile Jaw 20mm For PZ-1550 is a precision engineered jaw designed for installers working with TH profile multilayer and MLCP fittings. Built for use exclusively with the PZ-1550 press tool when fitted with the appropriate head adaptor, it delivers accurate and secure press connections for 20mm pipework. Manufactured for durability and consistent performance, this jaw supports reliable hot and cold water installations across domestic, commercial and industrial environments. Its quick change compatibility helps speed up workflow when switching between pipe sizes on site.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress TH Profile Jaw 26mm For PZ-1550

The MacPress TH Profile Jaw 26mm For PZ-1550 is a high quality, trade ready jaw designed for pressing 26mm TH profile multilayer and MLCP fittings. Built for use with the PZ-1550 press tool when fitted with the correct head adaptor, it delivers consistent, secure and accurate crimps across a wide range of installations. Ideal for hot and cold water pipework, underfloor heating and commercial systems, this 26mm jaw provides the reliability and durability required for professional use. Its quick fit design allows fast swapping between pipe sizes to keep jobs moving efficiently.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress TH Profile Jaw 32mm For PZ-1550

The MacPress TH Profile Jaw 32mm For PZ-1550 is a robust and reliable jaw engineered for pressing 32mm TH profile multilayer and MLCP fittings. Designed for use exclusively with the PZ-1550 press tool when paired with the correct head adaptor, it delivers consistent, accurate and strong press connections suitable for a wide range of plumbing and heating applications. Ideal for commercial, industrial and larger domestic pipework, this jaw ensures dependable performance and quick changeover to keep installations efficient and professional.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress TH Profile Jaw 16mm For PZ-1550

The MacPress TH Profile Jaw 16mm For PZ-1550 is a high quality pressing jaw designed for use with the PZ-1550 press tool when fitted with the correct head adaptor. Engineered specifically for TH profile fittings, it is widely used with multilayer and MLCP pipe systems where secure and reliable press connections are essential. Built for durability and precision, this 16mm jaw delivers consistent performance across hot and cold water installations in domestic, commercial and industrial environments. Its straightforward push-fit connection into the adaptor allows for quick attachment, supporting efficient and professional workflow on site.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress 15mm Stop Cock

The MacPress 15mm Stop Cock offers a secure, leak-proof solution for controlling water flow in residential and commercial plumbing systems. Featuring M Profile press-fit technology, it ensures fast and efficient installation. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 22mm Stop Cock

The MacPress 22mm Stop Cock offers a secure, leak-proof solution for controlling water flow in residential and commercial plumbing systems. Featuring M Profile press-fit technology, it ensures fast and efficient installation. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress 15mm Red/Blue Butterfly T Hand Ball Valve

The MacPress 15mm Red/Blue Butterfly T Hand Ball Valve features an M Profile press-fit design, allowing for quick, secure installation. The colour-coded T handle ensures clear identification and simple operation for hot and cold water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 22mm Red/Blue Butterfly T Hand Ball Valve

The MacPress 22mm Red/Blue Butterfly T Hand Ball Valve features an M Profile press-fit design, allowing for quick, secure installation. The colour-coded T handle ensures clear identification and simple operation for hot and cold water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 28mm Red/Blue Butterfly T Hand Ball Valve

The MacPress 28mm Red/Blue Butterfly T Hand Ball Valve features an M Profile press-fit design, allowing for quick, secure installation. The colour-coded T handle ensures clear identification and simple operation for hot and cold water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 28mm Double Check Valve

The MacPress 28mm Double Check Valve is WRAS & KIWA Certified, offering dependable backflow prevention in potable water systems. Compatible with M Profile press fittings, it is perfect for both residential and commercial applications, ensuring water safety and seamless integration. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress 15mm Isolation Valve

The MacPress 15mm Isolation Valve is a WRAS Approved press-fit solution, perfect for controlling water flow in potable systems. Its M Profile design ensures leak-proof integration with press-fit fittings, ideal for both residential and commercial plumbing applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 22mm Isolation Valve

The MacPress 22mm Isolation Valve is a WRAS Approved press-fit solution, perfect for controlling water flow in potable systems. Its M Profile design ensures leak-proof integration with press-fit fittings, ideal for both residential and commercial plumbing applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress 15mm Isolation Valve FULL BORE

The MacPress 15mm Full Bore Isolation Valve is a WRAS Approved press-fit solution designed to deliver maximum flow efficiency. Featuring M Profile technology and a full bore design, it ensures minimal pressure loss and reliable performance in both residential and commercial plumbing systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 22mm Isolation Valve FULL BORE

The MacPress 22mm Full Bore Isolation Valve is a WRAS Approved press-fit solution designed to deliver maximum flow efficiency. Featuring M Profile technology and a full bore design, it ensures minimal pressure loss and reliable performance in both residential and commercial plumbing systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress 15mm Angled Washing Machine Valve

The MacPress 15mm Angled Washing Machine Valve provides a compact, secure, and easy-to-install solution for washing machine water supply. With M Profile press-fit technology, it ensures a fast, leak-proof connection ideal for domestic plumbing setups. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 15mm Straight Washing Machine Valve

The MacPress 15mm Straight Washing Machine Valve offers a robust and reliable connection for washing machines, utilising M Profile press-fit technology to deliver quick, secure, and leak-proof installations in domestic plumbing systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 15mm Angled Service Valve

The MacPress 15mm Angled Service Valve features WRAS approval and M Profile press-fit connections, providing a quick, secure, and leak-proof solution for isolating water supplies in tight spaces. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 15mm Single Check Valve

The MacPress 15mm Single Check Valve is KIWA Certified and features M Profile press-fit technology, offering secure, leak-free connections. Ideal for safeguarding water systems and preventing backflow in both residential and commercial applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 22mm Single Check Valve

The MacPress 22mm Single Check Valve is KIWA Certified and features M Profile press-fit technology, offering secure, leak-free connections. Ideal for safeguarding water systems and preventing backflow in both residential and commercial applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress 28mm Single Check Valve

The MacPress 28mm Single Check Valve is KIWA Certified and features M Profile press-fit technology, offering secure, leak-free connections. Ideal for safeguarding water systems and preventing backflow in both residential and commercial applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress 22mm Double Check Valve

The MacPress 22mm Double Check Valve is WRAS & KIWA Certified, offering dependable backflow prevention in potable water systems. Compatible with M Profile press fittings, it is perfect for both residential and commercial applications, ensuring water safety and seamless integration. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress 15mm Double Check Valve

The MacPress 15mm Double Check Valve is WRAS & KIWA Certified, offering dependable backflow prevention in potable water systems. Compatible with M Profile press fittings, it is perfect for both residential and commercial applications, ensuring water safety and seamless integration. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress M Profile Jaw 22mm For PZ-1930 & MP-1930

The MacPress M Profile Jaw 22mm For PZ-1930 & MP-1930 is a durable and reliable pressing jaw designed for accurate and consistent pressing of 22mm fittings. Engineered for fast attachment, it connects directly to the PZ-1930 & MP-1930 press tool using a smooth quick release locking mechanism that allows installers to switch jaws with ease. This 22mm M profile jaw delivers secure and repeatable press joints, helping professionals maintain efficiency and precision during installation work. Built for trade use, it offers dependable performance across a wide range of plumbing applications.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress M Profile Jaw 28mm For PZ-1930 & MP-1930

The MacPress M Profile Jaw 28mm For PZ-1930 & MP-1930 is a strong, accurately engineered jaw designed for pressing 28mm fittings with consistency and precision. It connects directly to the PZ-1930 & MP-1930 press tool using a smooth quick release locking mechanism, allowing installers to change jaw sizes quickly while maintaining workflow efficiency. This 28mm M profile jaw is built for dependable daily use, offering stable pressing performance that ensures secure and uniform joints. Ideal for plumbing professionals, it provides a reliable solution for achieving high quality installation results across a broad range of applications.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress M Profile Jaw 35mm For PZ-1930 & MP-1930

The MacPress M Profile Jaw 35mm For PZ-1930 & MP-1930 is a heavy duty, precisely engineered jaw designed for consistent and accurate pressing of 35mm fittings. Built to meet the demands of professional installers, it connects directly to the PZ-1930 & MP-1930 press tool using a smooth quick release locking system that allows users to switch between jaw sizes quickly and efficiently. This 35mm M profile jaw provides stable performance across repeated press cycles, helping to ensure strong, secure and uniform joints on larger pipework. It is ideal for installers who require reliability, durability and precision in their pressing equipment.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress M Profile Jaw 15mm For PZ-1930 & MP-1930

The MacPress M Profile Jaw 15mm For PZ-1930 & MP-1930 is a high quality pressing jaw designed for reliable, consistent performance on 15mm pipe and fittings. Built for precision, it locks directly into the PZ-1930 & MP-1930 press tool using a quick release mechanism that allows installers to switch jaws effortlessly on site. This 15mm M profile jaw is engineered to deliver secure, repeatable press joins, helping installers achieve a professional finish with minimal effort. Its durable construction makes it suitable for daily trade use, offering a dependable solution for efficient installation work.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress M Profile Jaw 3 Piece Kit 15mm 22mm & 28mm Set & Case

The MacPress M Profile Jaw 3 Piece Kit 15mm, 22mm & 28mm Set with Case provides professional installers with the three most commonly used M profile press jaws in one convenient package. Designed for use with the MacPress PZ-1930 and MP-1930 press tools, this kit delivers accurate, consistent pressing across a wide range of plumbing and heating applications. Supplied in a durable carry case for safe storage and transport, it is an essential addition to any professional press tool system.   For more information, please follow the link here Compatibility information, please follow the link here

Novopress V28 Profile Angled Jaw Novopress ACO103 & ACO203 28mm

The Novopress V28 Profile Angled Jaw 28mm is engineered for use with ACO103 and ACO203 press machines. Featuring a 180° swivel design, this multi-angle jaw allows for precise pipe pressing in challenging and confined areas. Ideal for installations in tight spots, such as behind walls, exposed pipes, and shafts, it ensures efficient and accurate results even in the most difficult locations.

Novopress V35 Profile Angled Jaw Novopress ACO103 & ACO203 35mm

The Novopress V35 Profile Angled Jaw 35mm is designed for use with ACO103 and ACO203 press machines. This tool features a 180° swivel design, allowing for precise and efficient pipe pressing in tight and hard-to-reach areas. Its multi-angle capability makes it perfect for challenging installations, such as those behind walls, exposed pipes, and in shafts.

Novopress PB2 Adaptor Jaw For Use With 54mm & 42mm Jaws

The Novopress PB2 Adaptor Jaw for 42mm & 54mm Jaws (ZB203) is an essential accessory designed to expand the capability of Novopress ACO203 and ACO203XL press machines. It enables the use of 42mm and 54mm collar or sling jaw systems, providing greater flexibility across larger diameter press fitting installations. Built to Novopress engineering standards, it delivers reliable performance, durability, and precise compatibility for professional press applications.

Novopress V42 PB2 Profile Jaw Sling ACO203 & ACO203XL & ZB203 42mm

The Novopress V42 PB2 Profile Jaw Sling 42mm is a professional pressing sling designed for secure and accurate press connections on 42mm V profile fittings. Engineered for use with Novopress ACO203 and ACO203XL press tools, as well as the ZB203 adaptor, it delivers consistent pressing performance with excellent reliability. Manufactured from high-quality hardened steel, it is built for durability and long service life in demanding installation environments.

Novopress V54 PB2 Profile Jaw Sling ACO203 & ACO203XL & ZB203 54mm

The Novopress V54 PB2 Profile Jaw Sling 54mm is a high-performance pressing sling designed for accurate and secure press connections on 54mm V profile fittings. Compatible with Novopress ACO203 and ACO203XL press machines, as well as the ZB203 adaptor, it delivers consistent and reliable pressing results in demanding installation environments. Manufactured from hardened steel, it provides excellent durability and long service life for professional use.

Novopress V35 PB1 Profile Jaw For Novopress ACO103 35mm

The Novopress V35 Profile Jaw 35mm PB1 is a high-performance pressing jaw designed for use with Novopress ACO103 and ACO102 tools. Manufactured from specially hardened steel, this jaw ensures secure and precise press joints for various piping materials.

Novopress V15 PB2 Profile Jaw For Novopress ACO203 & ACO203XL 15mm

The Novopress V15 PB2 Profile Jaw for Novopress ACO203 & ACO203XL 15mm is a premium-quality pressing jaw designed to deliver precise and secure press connections for 15mm V profile fittings. Manufactured from specially hardened steel, it provides exceptional durability and consistent performance for professional installation work. Fully compatible with the Novopress ACO202, ACO203, and ACO203XL press tools, it is an essential component for reliable plumbing and heating system installations.

Novopress V22 PB2 Profile Jaw For Novopress ACO203 & ACO203XL 22mm

The Novopress V22 PB2 Profile Jaw for Novopress ACO203 & ACO203XL 22mm is a premium pressing jaw engineered to deliver precise and secure press connections for 22mm V profile fittings. Manufactured from specially hardened steel, it provides exceptional durability, accuracy, and long service life. Compatible with the Novopress ACO202, ACO203, and ACO203XL press tools, it is an essential accessory for professional plumbing and heating installations.

Novopress V28 PB2 Profile Jaw For Novopress ACO203 & ACO203XL 28mm

The Novopress V28 PB2 Profile Jaw for Novopress ACO203 & ACO203XL 28mm is a premium-quality pressing jaw designed to deliver accurate and secure press connections for 28mm V profile fittings. Manufactured from specially hardened steel, it offers outstanding durability and consistent performance for professional pipe installation work. Compatible with the Novopress ACO202, ACO203, and ACO203XL press tools, it is an essential accessory for reliable plumbing and heating installations.

Novopress V35 PB2 Profile Jaw For Novopress ACO203 & ACO203XL 35mm

The Novopress V35 PB2 Profile Jaw for Novopress ACO203 & ACO203XL 35mm is a high-quality pressing jaw designed to deliver accurate and secure press connections for 35mm V profile fittings. Manufactured from specially hardened steel, it provides excellent durability and consistent performance in professional plumbing and heating installations. Fully compatible with the Novopress ACO202, ACO203, and ACO203XL press tools, it is an essential component for reliable press fitting systems.

Novopress V42 PB2 Profile Jaw 42mm For Novopress ACO203 & ACO203XL

The Novopress V42 PB2 Profile Jaw 42mm for Novopress ACO203 & ACO203XL is a high-performance pressing jaw designed for accurate and secure press connections on 42mm V profile fittings. Manufactured from specially hardened steel, it delivers excellent durability and consistent pressing results for professional plumbing and heating applications. Fully compatible with the Novopress ACO202, ACO203, and ACO203XL press tools, it is an essential accessory for larger diameter pipe installations.

Novopress V54 PB2 Profile Jaw 54mm For Novopress ACO203 & ACO203XL

The Novopress V54 PB2 Profile Jaw 54mm for Novopress ACO203 & ACO203XL is a high-quality pressing jaw designed for secure and accurate press connections on 54mm V profile fittings. Manufactured from specially hardened steel, it delivers excellent durability and consistent performance in demanding professional installations. Fully compatible with the Novopress ACO202, ACO203, and ACO203XL press tools, it is an essential accessory for larger diameter press fitting systems.

Novopress V15 Profile Angled Jaw Novopress ACO103 & ACO203 15mm

The Novopress V15 Profile Angled Jaw 15mm is designed for the ACO103 and ACO203 press machines, featuring a unique 180° swivel design for enhanced flexibility in challenging installations. This multi-angle pressing ring allows for efficient and precise pipe pressing in confined or hard-to-reach areas, making it ideal for applications within opened walls, exposed pipes, and narrow shafts.

Novopress V22 Profile Angled Jaw Novopress ACO103 & ACO203 22mm

The Novopress V22 Profile Angled Jaw 22mm is designed for use with ACO103 and ACO203 press machines, featuring a 180° swivel design for enhanced flexibility. This multi-angle pressing jaw is perfect for efficient and precise pipe pressing in tight and challenging locations, such as opened walls, exposed pipes, and narrow shafts, making it an invaluable tool for complex installations.

Novopress Maxipro 7/8 PB1 ACR BMP For Use With ACO103

The Novopress Maxipro 7/8" PB1 ACR BMP is a state-of-the-art press jaw designed for use with the Novopress ACO103 pressing unit. This jaw offers a quick, secure, and permanent joint for air conditioning, refrigeration, and heat pump applications, enhancing productivity with reduced installation times and improved work flexibility.

Novopress U16 PB1 Profile Jaw For Novopress ACO103 16mm

The Novopress U16 Profile Jaw 16mm PB1 is engineered for the ACO103 press machines, delivering secure and precise pipe connections across a range of materials, including stainless steel, carbon steel, copper, plastics with PEX, and multilayer pipes and fittings. Suitable for potable water, natural gas, heating, and compressed air systems, this versatile tool ensures professional results in every application.

Novopress U20 PB1 Profile Jaw For Novopress ACO103 20mm

The Novopress U20 Profile Jaw 20mm PB1 is designed for use with the ACO103 press machines, providing reliable and precise pipe connections across a variety of materials including stainless steel, carbon steel, copper, plastics with PEX, and multilayer pipes and fittings. Suitable for potable water, natural gas, heating, and compressed air systems, this tool ensures professional-grade performance for all your installation needs.

Novopress U25 PB1 Profile Jaw For Novopress ACO103 25mm

The Novopress U25 Profile Jaw 25mm PB1 is designed for use with the ACO103 press machines, ensuring reliable and tight pipe connections across various materials, including stainless steel, carbon steel, copper, plastics with PEX, and multilayer pipes and fittings. This versatile tool is ideal for applications involving potable water, natural gas, heating, and compressed air systems.

Novopress U32 PB1 Profile Jaw For Novopress ACO103 32mm

The Novopress U32 Profile Jaw 32mm PB1 is designed for use with ACO103 press machines, ensuring reliable and tight pipe connections across various materials, including stainless steel, carbon steel, copper, plastics with PEX, and multilayer pipes and fittings. This versatile tool is ideal for applications involving potable water, natural gas, heating, and compressed air systems.

Novopress U40 PB1 Profile Jaw For Novopress ACO103 40mm

  The Novopress U Profile Jaw 40mm PB1 is designed for use with Novopress ACO103 press machines. This high-quality press jaw facilitates the creation of secure and tight pipe connections across various materials and applications.

Novopress V15 PB1 Profile Jaw For Novopress ACO103 15mm

The Novopress V15 Profile Jaw 15mm PB1 is designed for use with ACO103 press machines. This high compression pressing tool, made from specially hardened steel, ensures perfect, safe press jointing across various materials including stainless steel, carbon steel, copper, plastics with PEX, and multilayer pipes and fittings.

Novopress V22 PB1 Profile Jaw For Novopress ACO103 22mm

The Novopress V22 Profile Jaw 22mm PB1 is designed for use with ACO103 and ACO102 press machines. Engineered from specially hardened steel, this high-compression pressing tool guarantees secure and precise pipe connections. Suitable for various materials, including stainless steel, carbon steel, copper, plastics with PEX, and multilayer pipes, it ensures quality and tight jointing in plumbing, heating, and gas systems.

Novopress V28 PB1 Profile Jaw For Novopress ACO103 28mm

The Novopress V28 Profile Jaw 28mm PB1 is a high-performance press jaw compatible with Novopress ACO102 and ACO103 press machines. Made from specially hardened steel, this tool ensures durable and secure pipe connections across various materials, including stainless steel, carbon steel, copper, plastics with PEX, and multilayer pipes. It is engineered to provide precision and reliability in plumbing, heating, and gas installations.

Novopress M22 Profile Angled Jaw Novopress ACO103 & ACO203 22mm

The Novopress M Profile Angled Jaw 22mm is an essential tool for use with Novopress ACO103 and ACO203 pressing units. Designed to enhance flexibility and precision, this pivoting jaw features a 180° rotatable adapter, allowing for efficient operation in narrow or angled installation areas. Its compact design is ideal for challenging plumbing, heating, and air conditioning tasks.

Novopress M28 Profile Angled Jaw For Novopress ACO103 & ACO0203 28mm

The Novopress M Profile Angled Jaw 28mm is designed for use with the ACO103 and ACO203 pressing units. This pivoting jaw provides enhanced flexibility and precision in difficult-to-access installation areas. Its compact design and 180° rotatable adapter jaw make it ideal for one-handed operation, ensuring fast and efficient connections in narrow or angled spaces.

Novopress M35 Profile Angled Jaw Novopress ACO103 & ACO203 35mm

The Novopress M Profile Angled Jaw 35mm is designed for use with Novopress ACO103 and ACO203 pressing units, offering enhanced flexibility for connecting pipes in challenging installations. With a pivoting design and 180° rotation, this jaw provides precise and efficient performance, even in narrow or angled spaces. Ideal for professional use in plumbing, heating, and air conditioning applications.

Novopress Maxipro ½ PB1 ACR BMP For Use With ACO103

The Novopress Maxipro 1/2" PB1 ACR BMP is a state-of-the-art press Jaw designed for seamless integration with the Novopress ACO103 pressing unit. Ideal for air conditioning, refrigeration, and heat pump systems, this Jaw offers a quick and secure connection with no need for hot work permits or nitrogen gas cleaning. Experience reduced installation time and cost with a safe, permanent 3-point press that enhances productivity and ensures a professional finish.

Novopress Maxipro ¼ PB1 ACR BMP For Use With ACO103

The Novopress Maxipro 1/4" PB1 ACR BMP is a cutting-edge press jaw designed for seamless compatibility with the Novopress ACO103 pressing unit. Perfect for air conditioning, refrigeration, and heat pump systems, this jaw ensures a quick and secure connection, eliminating the need for hot work permits and nitrogen gas cleaning. Experience a significant reduction in installation time and costs, along with enhanced work flexibility and professional results.

Novopress Maxipro 1⅛ PB1 ACR BMP For Use With ACO103

The Novopress Maxipro 1 1/8" PB1 ACR BMP is a state-of-the-art press jaw designed for seamless use with the Novopress ACO103 pressing unit. Ideal for air conditioning, refrigeration, and heat pump systems, this jaw offers a fast and secure connection, eliminating the need for hot work permits and nitrogen gas cleaning. Benefit from reduced installation time and costs, along with enhanced work flexibility and professional results.

Novopress Maxipro ¾ PB1 ACR BMP For Use With ACO103

The Novopress Maxipro ¾ PB1 ACR BMP is an advanced press jaw designed for seamless integration with the Novopress ACO103 pressing unit. Perfect for air conditioning, refrigeration, and heat pump applications, this jaw ensures a secure, permanent joint, reducing installation time and enhancing work flexibility. Enjoy a flameless connection with no need for nitrogen gas cleaning, making installations faster and safer.

Novopress Maxipro 3/8 PB1 ACR BMP For Use With ACO103

The Novopress Maxipro 3/8" PB1 ACR BMP is an advanced press jaw designed for compatibility with the Novopress ACO103 pressing unit. Ideal for air conditioning, refrigeration, and heat pump applications, this jaw ensures a secure and permanent joint, significantly reducing installation time and enhancing work flexibility. It offers a flameless connection with no need for nitrogen gas cleaning, streamlining the installation process.

Novopress Maxipro 5/8 PB1 ACR BMP For Use With ACO103

The Novopress Maxipro 5/8" PB1 ACR BMP is a cutting-edge press jaw compatible with the Novopress ACO103 pressing unit. Ideal for air conditioning, refrigeration, and heat pump applications, this jaw ensures a secure and permanent joint. MaxiPro enhances productivity with significantly reduced installation times and improved work flexibility, offering a safe and efficient solution.

Novopress M15 PB2 Profile Jaw For Novopress ACO203 & ACO203XL 15mm

The Novopress M15 PB2 Profile Jaw for Novopress ACO203 & ACO203XL 15mm is a high-quality pressing jaw designed for precise and secure press connections on 15mm M profile fittings. Manufactured from specially hardened steel, it delivers excellent durability and consistent performance for professional plumbing and heating installations. Fully compatible with the Novopress ACO202, ACO203, and ACO203XL press tools, it is an essential component for reliable press fitting systems.

Novopress M22 PB2 Profile Jaw For Novopress ACO203 & ACO203XL 22mm

The Novopress M22 PB2 Profile Jaw for Novopress ACO203 & ACO203XL 22mm is a high-performance pressing jaw designed for accurate and secure press connections on 22mm M profile fittings. Manufactured from specially hardened steel, it delivers excellent durability and consistent results for professional plumbing and heating installations. Fully compatible with the Novopress ACO202, ACO203, and ACO203XL press tools, it is an essential accessory for reliable press fitting systems.

Novopress M28 PB2 Profile Jaw For Novopress ACO203 & ACO203XL 28mm

The Novopress M28 PB2 Profile Jaw for Novopress ACO203 & ACO203XL 28mm is a high-performance pressing jaw designed for accurate and secure press connections on 28mm M profile fittings. Manufactured from specially hardened steel, it delivers excellent durability and consistent performance for professional plumbing and heating installations. Fully compatible with the Novopress ACO202, ACO203, and ACO203XL press tools, it is an essential accessory for reliable press fitting systems.

Novopress M35 PB2 Profile Jaw For Novopress ACO203 & ACO203XL 35mm

The Novopress M35 PB2 Profile Jaw for Novopress ACO203 & ACO203XL 35mm is a high-quality pressing jaw designed for accurate and secure press connections on 35mm M profile fittings. Manufactured from specially hardened steel, it provides excellent durability and consistent performance in professional plumbing and heating installations. Fully compatible with the Novopress ACO202, ACO203, and ACO203XL press tools, it is an essential accessory for reliable press fitting systems.

Novopress M42 PB2 Profile Jaw Sling For ACO203 & ACO203XL & ZB203 42mm

The Novopress M42 PB2 Profile Jaw Sling 42mm for ACO203, ACO203XL & ZB203 is a professional-grade pressing sling designed to deliver secure and consistent press connections on 42mm M profile fittings. Featuring an innovative snap-on principle with spring force, it provides quick attachment and reliable operation without additional closure mechanisms for applicable sizes. Compatible with the Novopress ACO203, ACO203XL, and ZB203 adaptor, it is an essential tool for efficient metal pipe installations.

Novopress M54 PB2 Profile Jaw Sling For ACO203 & ACO203XL & ZB203 54mm

The Novopress M54 PB2 Profile Jaw Sling 54mm for ACO203, ACO203XL & ZB203 is a professional-grade pressing sling designed to produce secure and consistent press connections on 54mm M profile fittings. Featuring an innovative snap-on principle with spring force, it allows quick attachment and reliable operation without additional closure mechanisms for applicable sizes. Compatible with the Novopress ACO203, ACO203XL, and ZB203 adaptor, it is an essential accessory for efficient metal pipe installations.

Novopress Angled Adaptor Jaws For Use With ACO103

The Novopress Angled Adaptor Jaws SZB101 offer exceptional flexibility for pressing in tight or angled spaces. Capable of rotating 180°, these adaptor jaws accommodate M- and V-profile press rings from 15mm to 35mm, making them ideal for challenging installation scenarios.

Novopress SZB201 Angled Adaptor Jaws For Use With ACO203

The Novopress SZB201 Angled Adaptor Jaws offer versatile 180° rotation for improved access and precision in tight or challenging installation spaces. Designed for use with M- and V-profile press rings, these adaptor jaws are ideal for efficient pressing in hard-to-reach areas.

Novopress M15 Profile Angled Jaw Novopress ACO103 & ACO203 15mm

The Novopress M Profile Angled Jaw 15mm is designed for use with the ACO103 and ACO203 pressing units. This pivoting jaw provides enhanced flexibility and precision in difficult-to-access installation areas. Its compact design and 180° rotatable adapter jaw make it ideal for one-handed operation, ensuring fast and efficient connections in narrow or angled spaces.

Novopress M15 PB1 Profile Jaw For Novopress ACO103 15mm

The Novopress M15 Profile Jaw 15mm PB1 is designed for high-compression pressing with Novopress ACO103 tools. Crafted from specially hardened steel, this jaw ensures perfect and safe press jointing. Ideal for various applications, it guarantees reliable connections for pipes and fittings with its system-specific contours.

Novopress M22 PB1 Profile Jaw For Novopress ACO103 22mm

  The Novopress M22 Profile Jaw 22mm PB1 is designed for high-compression pressing with Novopress ACO103 tools. Made from specially hardened steel, this jaw ensures precise and safe press jointing. It is engineered for various applications, guaranteeing robust and dependable connections.

Novopress M28 PB1 Profile Jaw For Novopress ACO103 28mm

The Novopress M28 Profile Jaw 28mm PB1 is engineered for high-compression pressing with Novopress ACO103 tools. Crafted from specially hardened steel, this jaw ensures precise and reliable press jointing, suitable for various high-pressure applications.

Novopress M35 PB1 Profile Jaw For Novopress ACO103 35mm

The Novopress M35 Profile Jaw 35mm PB1 is designed for high-compression pressing with Novopress ACO103 tools. Constructed from specially hardened steel, this jaw ensures secure and precise press joints for robust and reliable connections.

MacDonald Plumbing Supplies MacPress 180° Jaw Adaptor For PZ-1930 & MP-1930

The MacPress 180° Jaw Adaptor For PZ-1930 & MP-1930 is a specialist tool accessory that turns a standard press tool into a far more flexible system for working in restricted spaces. By allowing the jaw mechanism to rotate through 180 degrees, it opens up tight corners, low-ceiling plant rooms and other awkward areas where a normal straight jaw would not reach or would need awkward pipe positioning. It is built for fast, secure attachment and designed to keep the press alignment stable, so installers can complete jobs more efficiently without compromising joint quality. Compatible with the PZ-1930 & MP-1930 family and used alongside matching angled jaws, it significantly extends the usefulness of a press tool on real-world sites.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies Refill For The MacPack Press Starter Kit For Gas

The Refill For The MacPack Press Starter Pack For Gas is designed to replenish your MacPress Starter Pack 1 with essential components for ongoing gas system installations. It includes 90 fittings to ensure your projects run smoothly and efficiently. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPack Press Starter Kit For Gas

Top up your MacPress fitting stock with the MacPack Press Refill Pack For Water – 15mm Fittings, designed for professional installers who value speed, safety, and simplicity. This refill pack includes 105 premium-quality 15mm M Profile press fittings for water applications – all neatly stored in a robust FatMac case for easy access on-site. Suitable for potable water, heating, and hot water systems, each fitting is WRAS Approved and compatible with standard copper tube. Perfect for topping up your MacPress Water Starter Pack or expanding your on-the-go fitting kit. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies Refill For The MacPack Press Starter Kit For Water

The Refill For The MacPack Press Starter Pack For Water provides a comprehensive, professional-grade selection of MacPress M-profile press fittings. Specially curated for potable water and heating systems, this refill pack ensures you have the most commonly used fittings readily available for seamless installation work. From elbows and couplings to equal tees and reducers, each component in this pack is engineered for flame-free, WRAS-approved connections that deliver long-term leak-free performance. Designed to work flawlessly with copper pipe, the refill pack offers dependable quality for installers who demand reliability, efficiency, and peace of mind. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPack Press Starter Kit For Water

The MacPack Press Starter Pack For Water is a comprehensive solution for plumbing professionals working on water system installations. This starter pack includes an essential selection of WRAS Approved MacPress fittings designed for domestic and commercial water applications, including potable water, heating, and hot water systems. All fittings feature a high-performance M-Profile design that ensures fast, secure, and flame-free connections. With no need for hot works, this kit saves time on-site while ensuring full compliance with BS EN standards. Supplied in a durable FatMac case, the pack is ideal for installers looking for reliable, professional-grade fittings. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies FatMac Storage Case MACSNS

The MacDonald Plumbing Supplies FatMac Storage Case MACSNS is a durable and practical storage solution designed to keep tools, fittings and small parts organised. Featuring a Stac N Store design with 12 removable compartments, it allows users to customise storage to suit different items and job requirements. With compact dimensions of 425mm x 360mm x 105mm, it is ideal for both professional plumbers and DIY users who need reliable, portable storage for everyday use.

MacDonald Plumbing Supplies MacPress 22mm Red/Blue Lever Valves M Profile WRAS Approved

The MacPress 22mm Red/Blue Lever Valves M Profile are WRAS approved, offering reliable water flow control for press fit plumbing systems. Featuring convenient red and blue lever handles, they ensure easy operation and compliance with regulatory standards. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 28mm Red/Blue Lever Valves M Profile WRAS Approved

The MacPress 28mm Red/Blue Lever Valves M Profile are WRAS approved, offering reliable water flow control for press fit plumbing systems. Featuring convenient red and blue lever handles, they ensure easy operation and compliance with regulatory standards. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 35mm Red/Blue Lever Valves M Profile WRAS Approved

The MacPress 35mm Red/Blue Lever Valves M Profile are WRAS approved, offering reliable water flow control for press fit plumbing systems. Featuring convenient red and blue lever handles, they ensure easy operation and compliance with regulatory standards. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 42mm Red/Blue Lever Valves M Profile WRAS Approved

The MacPress 42mm Red/Blue Lever Valves M Profile are WRAS approved, offering reliable water flow control for press fit plumbing systems. Featuring convenient red and blue lever handles, they ensure easy operation and compliance with regulatory standards. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 54mm Red/Blue Lever Valves M Profile WRAS Approved

The MacPress 54mm Red/Blue Lever Valves M Profile are WRAS approved, offering reliable water flow control for press fit plumbing systems. Featuring convenient red and blue lever handles, they ensure easy operation and compliance with regulatory standards. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 15mm Red/Blue Lever Valves M Profile WRAS Approved

The MacPress 15mm Red/Blue Lever Valves M Profile are WRAS approved, offering reliable water flow control for press fit plumbing systems. Featuring convenient red and blue lever handles, they ensure easy operation and compliance with regulatory standards. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

FRANKISCHE MLCP Alpex PPSU 90° Swept Elbow 16mm x 16mm

The FRANKISCHE MLCP alpex PPSU 90° Swept Elbow 16mm x 16mm is a high-quality press fitting designed for use with multilayer composite pipe systems in both heating and potable water applications. Manufactured from durable PPSU, it offers excellent strength, temperature resistance and long-term reliability. Its swept design improves flow efficiency, while the integrated leak before press feature enhances installation safety. Suitable for professional plumbers and heating engineers, it ensures a secure, high-performance connection every time.

FRANKISCHE MLCP Alpex PPSU 90° Swept Elbow 20mm x 20mm

The FRANKISCHE MLCP alpex PPSU 90° Swept Elbow 20mm x 20mm is a high-quality press fitting designed for use with multilayer composite pipe systems in both heating and potable water applications. Manufactured from durable PPSU, it offers excellent strength, temperature resistance and long-term reliability. Its swept design improves flow efficiency, while the integrated leak before press feature enhances installation safety. Suitable for professional plumbers and heating engineers, it ensures a secure, high-performance connection every time.

FRANKISCHE MLCP Alpex PPSU 90° Swept Elbow 26mm x 26mm

The FRANKISCHE MLCP alpex PPSU 90° Swept Elbow 26mm x 26mm is a high-quality press fitting designed for use with multilayer composite pipe systems in both heating and potable water applications. Manufactured from durable PPSU, it offers excellent strength, temperature resistance and long-term reliability. Its swept design improves flow efficiency, while the integrated leak before press feature enhances installation safety. Suitable for professional plumbers and heating engineers, it ensures a secure, high-performance connection every time.

FRANKISCHE MLCP Alpex PPSU 90° Swept Elbow 32mm x 32mm

The FRANKISCHE MLCP alpex PPSU 90° Swept Elbow 32mm x 32mm is a high-quality press fitting designed for use with multilayer composite pipe systems in both heating and potable water applications. Manufactured from durable PPSU, it offers excellent strength, temperature resistance and long-term reliability. Its swept design improves flow efficiency, while the integrated leak before press feature enhances installation safety. Suitable for professional plumbers and heating engineers, it ensures a secure, high-performance connection every time.

MacDonald Plumbing Supplies MacPress Female Reducing Tee 15mm x 15mm x ½ - GAS

The MacPress Female Reducing Tee 15mm x 15mm x ½ – GAS provides a secure press-fit solution with two 15mm copper ends and a ½ inch BSP female threaded branch. Designed for gas installations, this tee features a yellow O-ring and full compliance with BS EN 1254-7. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Female Reducing Tee 22mm x 22mm x ½ - GAS

The MacPress Female Reducing Tee 22mm x 22mm x ½ – GAS provides a secure press-fit solution with two 22mm copper ends and a ½ inch BSP female threaded branch. Designed for gas installations, this tee features a yellow O-ring and full compliance with BS EN 1254-7. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Reducing Tee 54mm x 54mm x 28mm - GAS

The MacPress Reducing Tee 54mm x 54mm x 28mm – GAS enables a secure 28mm branch from a 54mm main gas supply. Featuring a yellow gas O-ring and press-fit design for fast, compliant installation.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Female Coupling 15mm x ½ - GAS

The MacPress Female Coupling 15mm x ½ – GAS is designed to connect 15mm copper pipe to ½ BSP female threaded components, specifically for gas applications. Featuring a yellow gas O-ring and compliance with BS EN 1254-7 standards. Backed by a 20-year warranty.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Coupling 15mm x ¾ - GAS

The MacPress Female Coupling 15mm x ¾ – GAS is designed to connect 15mm copper pipe to ¾ BSP female threaded components, ideal for gas applications. Featuring a yellow gas O-ring and compliance with BS EN 1254-7 standards. Backed by a 20-year warranty.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Coupling 22mm x ½ - GAS

The MacPress Female Coupling 22mm x ½" – GAS offers a safe, flame-free solution for joining 22mm copper tube to ½" BSP threaded gas components. Designed for professional use, it features a yellow O-ring for clear gas system identification. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Coupling 22mm x ¾ - GAS

The MacPress Female Coupling 22mm x ¾" – GAS connects copper pipe to ¾" BSP threaded gas components using secure M Profile press technology. Suitable for gas installations, marked with a yellow O-ring for easy identification. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Coupling 22mm x 1" - GAS

The MacPress Female Coupling 22mm x 1" – GAS is a gas-rated press-fit fitting designed for connecting copper pipe to 1" BSP threaded components. With its yellow O-ring and certified conformity, it ensures safe, professional gas installations.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Coupling 28mm x ¾ - GAS

The MacPress Female Coupling 28mm x ¾" – GAS connects 28mm copper pipe to a ¾" BSP female thread. Designed for gas installations, it features a yellow O-ring and complies fully with BS EN 1254-7, ideal for safe and professional gas system builds.   Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Female Swivel Coupling 22mm x 1 - WATER

The MacPress Female Swivel Coupling 22mm x 1" is a versatile press fitting designed for quick, flame-free connection between copper pipework and threaded components. WRAS approved and suitable for potable water, it’s ideal for heating and plumbing installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Female Elbow 15mm x ½ - WATER

The MacPress Female Elbow 15mm x ½" is a WRAS approved copper press fitting designed for use in heating, hot water, and potable water systems. With a secure M-profile connection, it's the ideal choice for fast, leak-free installations in professional plumbing setups. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Elbow 22mm x ¾ - WATER

The MacPress Female Elbow 22mm x ¾" is a high-quality copper press fitting designed for use in hot water, heating, and potable water installations. With WRAS approval and M-profile design, it ensures leak-free, efficient, and professional-grade performance. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Elbow 28mm x 1" - WATER

  The MacPress Female Elbow 28mm x 1" is a professional-grade copper press fitting designed for potable water, heating, and hot water systems. Featuring a WRAS-approved M-profile and robust construction, it provides a reliable and permanent leak-free connection. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Male Elbow 15mm x ½ - WATER

The MacPress Male Elbow 15mm x ½" is a WRAS approved, reliable press fitting designed for use in plumbing, heating, and potable water systems. Its versatile design ensures secure, leak-free connections in tight spaces and varied installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Elbow 22mm x ¾ - WATER

The MacPress Male Elbow 22mm x ¾" BSP is a WRAS approved, durable press fitting designed for use in potable water, heating, and hot water systems. Offering a secure, leak-free connection, it is perfect for a wide range of professional plumbing and heating applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Elbow 28mm x 1" - WATER

The MacPress Male Elbow 28mm x 1" BSP is a WRAS approved, high-performance press fitting designed for potable water, heating, and hot water systems. Engineered for professional plumbing applications, it provides reliable, leak-free connections every time. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Wall Plate Elbow 15mm x ½ - WATER

The MacPress Wall Plate Elbow 15mm x ½" BSP is a WRAS approved press fitting suitable for use in potable water, heating, and hot water systems. Designed for secure and reliable plumbing connections, this wall plate elbow provides a long-lasting, leak-free solution. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Coupling 67mm - WATER

The MacPress 67mm Coupling is a reliable M-Profile press fitting suitable for water, heating, and potable applications. WRAS approved and built for professional use, it's perfect for quick, leak-free installations.     Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Reduced Coupling 35mm x 22mm - WATER

The MacPress Reduced Coupling 35mm x 22mm is a WRAS approved copper press fitting designed to securely join different pipe sizes in water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reduced Coupling 42mm x 28mm - WATER

The MacPress Reduced Coupling 42mm x 28mm is a WRAS approved copper press fitting designed to securely join different pipe sizes in water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reduced Coupling 54mm x 28mm - WATER

The MacPress Reduced Coupling 54mm x 28mm is a WRAS approved copper press fitting designed to securely join different pipe sizes in water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Fitting Reducer 54mm x 28mm - WATER

The MacPress Fitting Reducer 54mm x 28mm offers a seamless and secure reduction between pipe sizes in heating, hot water, and potable water systems. WRAS approved and M-profile design for leak-free reliability. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Swivel Coupling 15mm x ½ - WATER

The MacPress Female Swivel Coupling 15mm x ½ is a versatile press fitting designed for quick, flame-free connection between copper pipework and threaded components. WRAS approved and suitable for potable water, it’s ideal for heating and plumbing installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Swivel Coupling 15mm x ¾ - WATER

The MacPress Female Swivel Coupling 15mm x ¾ is a versatile press fitting designed for quick, flame-free connection between copper pipework and threaded components. WRAS approved and suitable for potable water, it’s ideal for heating and plumbing installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Female Swivel Coupling 22mm x ¾ - WATER

The MacPress Female Swivel Coupling 22mm x ¾ is a versatile press fitting designed for quick, flame-free connection between copper pipework and threaded components. WRAS approved and suitable for potable water, it’s ideal for heating and plumbing installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Backplate Elbow 15mm x ½ - GAS

The MacPress Backplate Elbow 15mm x ½ – GAS connects 15mm copper pipe to a ½ BSP male thread, perfect for gas applications. Featuring a yellow gas O-ring and compliance with BS EN 1254-7 standards. Supported by a 20-year warranty.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducing Tee 22mm x 22mm x 15mm - GAS

The MacPress 22mm x 22mm x 15mm Reducing Tee – GAS is a high-performance press-fit gas fitting designed for professional installers. Clearly marked for gas use with a yellow O-ring, this reducing tee ensures safe, efficient installation.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducing Tee 28mm x 28mm x 15mm - GAS

The MacPress 28mm x 28mm x 15mm Reducing Tee – GAS provides a secure and efficient way to branch off a 15mm pipe from a 28mm gas supply. Fully certified and designed for quick, flame-free installation.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducing Tee 28mm x 28mm x 22mm - GAS

The MacPress 28mm x 28mm x 22mm Reducing Tee – GAS allows for a reliable reduction from 28mm pipe to a 22mm branch in gas installations. A flame-free, press-fit solution engineered for safety and efficiency.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducing Tee 22mm x 15mm x 22mm - GAS

The MacPress 22mm x 15mm x 22mm Reducing Tee – GAS is a professional-grade press-fit solution for branching gas supply pipework. Featuring a yellow O-ring and M Profile compatibility, it delivers fast, flame-free installation and long-term reliability.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Union Connector 15mm x ½ - WATER

The MacPress Male Union Connector 15mm x ½" BSP is a WRAS approved, high-performance press fitting designed for use in potable water, heating, and hot water systems. This connector provides a secure, leak-free connection for professional plumbing applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Union Connector 22mm x ¾ - WATER

The MacPress Male Union Connector 22mm x ¾" BSP is a WRAS approved, high-performance press fitting designed for use in potable water, heating, and hot water systems. This connector provides a secure, leak-free connection for professional plumbing applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Union Connector 28mm x 1" - WATER

The MacPress Male Union Connector 28mm x 1" BSP is a WRAS approved press fitting ideal for use in potable water, heating, and hot water systems. Providing a secure, leak-free connection, it is a preferred choice for professional plumbing applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Coupling 28mm x 1" - GAS

The MacPress Female Coupling 28mm x 1" – GAS offers a reliable connection from 28mm copper press-fit pipe to 1" BSP female threaded fittings. Designed specifically for gas installations with a yellow O-ring and full compliance with BS EN 1254-7. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Coupling 15mm x ½ - GAS

The MacPress Male Coupling 15mm x ½" – GAS provides a secure transition from copper pipe to threaded fittings in gas systems. Engineered with a yellow O-ring and designed for safe, flame-free gas installations.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Coupling 22mm x 1" - WATER

The MacPress Male Coupling 22mm x 1" delivers a secure, WRAS approved solution for connecting 22mm copper pipe to 1" BSP male threaded fittings in water and heating systems. A professional-grade, flame-free press connection. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Coupling 28mm x 1" - WATER

The MacPress Male Coupling 28mm x 1" is a WRAS approved press fitting designed for connecting 28mm copper pipe to 1" BSP threaded systems. Ideal for potable water, heating, and hot water installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Coupling 35mm x 1¼ - WATER

The MacPress Male Coupling 35mm x 1¼" offers a professional-grade, WRAS approved connection for joining 35mm copper pipe to 1¼" BSP threads. Suitable for use in potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Coupling 42mm x 1½ - WATER

The MacPress Male Coupling 42mm x 1½" is a high-quality WRAS approved press fitting designed for professional use in heating, hot water and potable water systems. Combines a secure press connection with a 1½" BSP male thread. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Coupling 54mm x 2" - WATER

The MacPress Male Coupling 54mm x 2" is a robust WRAS approved press fitting designed for professional plumbing, heating, and potable water systems. It combines a secure press connection with a 2" BSP male thread for versatile installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Partial Crossover 15mm - WATER

The MacPress Partial Crossover 15mm is a high-quality WRAS approved press fitting designed to allow two pipes to pass each other within a compact installation layout for hot, cold and potable water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Partial Crossover 22mm - WATER

The MacPress Partial Crossover 22mm is a high-quality WRAS approved press fitting designed to allow two pipes to pass each other within a compact installation layout for hot, cold and potable water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Full Crossover 15mm - WATER

The MacPress Full Crossover 15mm is a high-quality WRAS approved press fitting designed to allow two pipes to pass each other within a compact installation layout for hot, cold and potable water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Full Crossover 22mm - WATER

The MacPress Full Crossover 22mm is a high-quality WRAS approved press fitting designed to allow two pipes to pass each other within a compact installation layout for hot, cold and potable water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Female Reducing Tee 15mm x 15mm x ½ - WATER

The MacPress Female Reducing Tee 15mm x 15mm x ½ is a compact and durable press fitting designed for potable water, heating, and hot water systems. With WRAS approval and an M-profile press design, it ensures a fast, flame-free installation with secure, leak-free connections. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Reducing Tee 22mm x 22mm x ½ - WATER

The MacPress Female Reducing Tee 22mm x 22mm x ½ is a compact and durable press fitting designed for potable water, heating, and hot water systems. With WRAS approval and an M-profile press design, it ensures a fast, flame-free installation with secure, leak-free connections. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Female Reducing Tee 28mm x 28mm x ½ - WATER

The MacPress Female Reducing Tee 28mm x 28mm x ½ is a compact and durable press fitting designed for potable water, heating, and hot water systems. With WRAS approval and an M-profile press design, it ensures a fast, flame-free installation with secure, leak-free connections. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Female Coupling 15mm x ½ - WATER

The MacPress Female Coupling 15mm x ½" is a high-quality WRAS approved press fitting designed for secure and efficient connections between copper tube and threaded pipework in potable and heating water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Coupling 22mm x ¾ - WATER

The MacPress Female Coupling 22mm x ¾" is a high-quality WRAS approved press fitting designed for secure and efficient connections between copper tube and threaded pipework in potable and heating water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Female Coupling 28mm x 1 - WATER

The MacPress Female Coupling 28mm x 1" is a WRAS approved press fitting designed for connecting copper tube to threaded pipework in potable water, heating, and hot water systems. A secure, flame-free solution for professional installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Coupling 35mm x 1¼ - WATER

The MacPress Female Coupling 35mm x 1¼" is a WRAS approved press-fit connector designed for secure joining of copper pipe to 1¼" BSP threaded fittings in potable, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Coupling 42mm x 1½ - WATER

The MacPress Female Coupling 42mm x 1½" is a high-performance press-fit connector with WRAS approval, perfect for use in heating, hot water, and potable water systems, offering a reliable copper-to-threaded transition. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Coupling 54mm x 2 - WATER

The MacPress Female Coupling 54mm x 2" is a robust WRAS approved press-fit connector designed for high-capacity water systems, suitable for potable, hot water, and heating installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Coupling 15mm x ½ - WATER

The MacPress Male Coupling 15mm x ½ is a compact press fitting designed for seamless connection between copper pipe and ½" BSP threaded components. WRAS approved, it's suitable for use with potable water, heating, and hot water systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Male Coupling 15mm x ¾ - WATER

The MacPress Male Coupling 15mm x ¾ is a high-quality WRAS approved fitting designed to connect 15mm copper pipe to a ¾" BSP male thread. Ideal for potable water, heating, and hot water systems with a secure M-profile press connection.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Coupling 22mm x ½ - WATER

The MacPress Male Coupling 22mm x ½ is a WRAS approved press fitting for connecting 22mm copper pipe to a ½" BSP male thread. Suitable for potable water, hot water, and heating systems, it provides a secure and leak-free connection using M-profile press technology. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Male Coupling 22mm x ¾ - WATER

The MacPress Male Coupling 22mm x ¾ offers a dependable and WRAS approved connection for water and heating systems. Designed to join 22mm copper tube to ¾" BSP male threads, this M-profile press fitting ensures a secure, flame-free installation. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reduced Coupling 22mm x 15mm - WATER

The MacPress Reduced Coupling 22mm x 15mm is a WRAS approved copper press fitting designed to securely join different pipe sizes in water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reduced Coupling 28mm x 15mm - WATER

The MacPress Reduced Coupling 28mm x 15mm is a WRAS approved copper press fitting designed to securely join different pipe sizes in water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reduced Coupling 28mm x 22mm - WATER

The MacPress Reduced Coupling 28mm x 22mm is a WRAS approved copper press fitting designed to securely join different pipe sizes in water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reduced Coupling 35mm x 28mm - WATER

The MacPress Reduced Coupling 35mm x 28mm is a WRAS approved copper press fitting designed to securely join different pipe sizes in water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reduced Coupling 42mm x 35mm - WATER

The MacPress Reduced Coupling 42mm x 35mm is a WRAS approved copper press fitting designed to securely join different pipe sizes in water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reduced Coupling 54mm x 42mm - WATER

The MacPress Reduced Coupling 54mm x 42mm is a WRAS approved copper press fitting designed to securely join different pipe sizes in water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Obtuse Elbow 54mm - GAS

The MacPress 54mm Obtuse Gas Elbow is BS EN 1254-7 approved, featuring a yellow O-ring and gas marking for clear gas system identification. Ideal for gentle directional changes in gas pipework, it delivers a secure, flame-free press connection.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Equal Tee 42mm - GAS

The MacPress 42mm Equal Tee is a high-quality gas fitting featuring a yellow O-ring and gas conformity marking, designed for safe and secure press-fit connections in gas systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Obtuse Street Elbow 54mm - GAS

The MacPress 54mm Obtuse Street Elbow is designed for gas pipe installations. Featuring a yellow O-ring and clear gas markings, this fitting offers reliable and secure press-fit connections for natural gas and LPG systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Elbow 54mm - GAS

The MacPress 54mm Gas Elbow features a yellow O-ring and gas conformity marking, offering a reliable, flame-free solution for directional changes in copper gas pipework for both domestic and commercial applications.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Street Elbow 54mm - GAS

The MacPress 54mm Street Elbow is designed for gas installations, featuring a yellow O-ring and gas conformity marking, ensuring a safe and secure press-fit connection for natural gas and LPG systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Equal Tee 54mm - GAS

The MacPress 54mm Equal Tee is a high-quality gas fitting featuring a yellow O-ring and gas conformity marking, designed for safe and secure press-fit connections in gas systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Equal Tee 35mm - GAS

The MacPress 35mm Equal Tee is a high-quality gas fitting featuring a yellow O-ring and gas conformity marking, designed for safe and secure press-fit connections in gas systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Coupling 54mm - GAS

The MacPress 54mm Gas Coupling features a yellow O-ring and gas conformity marking, offering a safe and certified solution for connecting copper pipe in domestic and commercial gas installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Obtuse Elbow 42mm - GAS

The MacPress 42mm Obtuse Gas Elbow is BS EN 1254-7 approved, featuring a yellow O-ring and gas marking for clear gas system identification. Ideal for gentle directional changes in gas pipework, it delivers a secure, flame-free press connection.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Obtuse Street Elbow 42mm - GAS

The MacPress 42mm Obtuse Street Elbow is designed for gas pipe installations. Featuring a yellow O-ring and clear gas markings, this fitting offers reliable and secure press-fit connections for natural gas and LPG systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Elbow 42mm - GAS

The MacPress 42mm Gas Elbow features a yellow O-ring and gas conformity marking, offering a reliable, flame-free solution for directional changes in copper gas pipework for both domestic and commercial applications.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Street Elbow 42mm - GAS

The MacPress 42mm Street Elbow is designed for gas installations, featuring a yellow O-ring and gas conformity marking, ensuring a safe and secure press-fit connection for natural gas and LPG systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducing Tee 54mm x 54mm x 28mm - WATER

The MacPress Reducing Tee (54mm x 54mm x 28mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Reducing Tee 54mm x 54mm x 42mm - WATER

The MacPress Reducing Tee (54mm x 54mm x 42mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Coupling 42mm - GAS

The MacPress 42mm Gas Coupling features a yellow O-ring and gas conformity marking, offering a safe and certified solution for connecting copper pipe in domestic and commercial gas installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Obtuse Elbow 35mm - GAS

The MacPress 35mm Obtuse Gas Elbow is BS EN 1254-7 approved, featuring a yellow O-ring and gas marking for clear gas system identification. Ideal for gentle directional changes in gas pipework, it delivers a secure, flame-free press connection.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Elbow 35mm - GAS

The MacPress 35mm Gas Elbow features a yellow O-ring and gas conformity marking, offering a reliable, flame-free solution for directional changes in copper gas pipework for both domestic and commercial applications.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Obtuse Street Elbow 35mm - GAS

The MacPress 35mm Obtuse Street Elbow is designed for gas pipe installations. Featuring a yellow O-ring and clear gas markings, this fitting offers reliable and secure press-fit connections for natural gas and LPG systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Street Elbow 35mm - GAS

The MacPress 35mm Street Elbow is designed for gas installations, featuring a yellow O-ring and gas conformity marking, ensuring a safe and secure press-fit connection for natural gas and LPG systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducing Tee 42mm x 42mm x 15mm - WATER

The MacPress Reducing Tee (42mm x 42mm x 15mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Obtuse Elbow 54mm - WATER

The MacPress 54mm Obtuse Elbow is a WRAS approved press fitting ideal for heating, hot water, and potable systems. Designed with the trusted M-Profile for a secure, leak-free connection. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Elbow 54mm - WATER

The MacPress 54mm Elbow is a high-quality press fitting designed for heating, hot water, and potable water systems. WRAS approved and M-profile – trusted by professionals for secure, leak-free joints. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Obtuse Street Elbow 54mm - WATER

The MacPress Obtuse Street Elbow 54mm provides a smooth directional change for water pipework. WRAS approved and ideal for heating, hot water and potable water installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Street Elbow 54mm - WATER

The MacPress Street Elbow 54mm is a WRAS approved press fitting designed for compact changes in direction on water pipework. Ideal for potable water, heating, and hot water installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Coupling 35mm - GAS

The MacPress 35mm Gas Coupling features a yellow O-ring and gas conformity marking, offering a safe and certified solution for connecting copper pipe in domestic and commercial gas installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Equal Tee 54mm - WATER

The MacPress 54mm Equal Tee is a WRAS approved press fitting ideal for connecting three equal pipe runs in water, heating, and potable systems. M-Profile design for reliable, professional installations.   Installation Instructions for Press Fittings 1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducing Tee 54mm x 54mm x 22mm - WATER

The MacPress Reducing Tee (54mm x 54mm x 22mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Obtuse Elbow 42mm - WATER

The MacPress 42mm Obtuse Elbow is a WRAS approved press fitting ideal for heating, hot water, and potable systems. Designed with the trusted M-Profile for a secure, leak-free connection. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Obtuse Street Elbow 42mm - WATER

The MacPress Obtuse Street Elbow 42mm provides a smooth directional change for water pipework. WRAS approved and ideal for heating, hot water and potable water installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Stop End 54mm - WATER

The MacPress Stop End 54mm provides a clean and secure termination point for copper pipework in water systems. Ideal for heating, hot water and potable water applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Elbow 42mm - WATER

The MacPress 42mm Elbow is a high-quality press fitting designed for heating, hot water, and potable water systems. WRAS approved and M-profile – trusted by professionals for secure, leak-free joints. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Street Elbow 42mm - WATER

The MacPress Street Elbow 42mm is a WRAS approved press fitting designed for compact changes in direction on water pipework. Ideal for potable water, heating, and hot water installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Slip Coupling 54mm - WATER

The MacPress Slip Coupling 54mm is a WRAS approved press fitting designed for quick, secure pipe repairs and connections on hot water, heating, and potable water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducing Tee 42mm x 42mm x 28mm - WATER

The MacPress Reducing Tee (42mm x 42mm x 28mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Reducing Tee 42mm x 42mm x 22mm - WATER

The MacPress Reducing Tee (42mm x 42mm x 22mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Reducing Tee 42mm x 42mm x 35mm - WATER

The MacPress Reducing Tee (42mm x 42mm x 35mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Equal Tee 42mm - WATER

The MacPress 42mm Equal Tee is a WRAS approved press fitting ideal for connecting three equal pipe runs in water, heating, and potable systems. M-Profile design for reliable, professional installations.   Installation Instructions for Press Fittings 1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies Brass Flange Plug 1"

A secure and reliable plug designed for pipe flanges. Constructed from high-quality brass, this flange plug ensures a tight seal and prevents leakage in flange connections. It is a versatile component used in various industrial and plumbing applications.

MacDonald Plumbing Supplies MacPress Slip Coupling 42mm - WATER

The MacPress Slip Coupling 42mm is a WRAS approved press fitting designed for quick, secure pipe repairs and connections on hot water, heating, and potable water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducing Tee 35mm x 35mm x 28mm - WATER

The MacPress Reducing Tee (35mm x 35mm x 28mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Equal Tee 35mm - WATER

The MacPress 35mm Equal Tee is a WRAS approved press fitting ideal for connecting three equal pipe runs in water, heating, and potable systems. M-Profile design for reliable, professional installations.   Installation Instructions for Press Fittings 1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Fitting Reducer 54mm x 42mm - WATER

The MacPress Fitting Reducer 54mm x 42mm offers a seamless and secure reduction between pipe sizes in heating, hot water, and potable water systems. WRAS approved and M-profile design for leak-free reliability. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Stop End 42mm - WATER

The MacPress Stop End 42mm provides a clean and secure termination point for copper pipework in water systems. Ideal for heating, hot water and potable water applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Coupling 54mm - WATER

The MacPress 54mm Coupling is a reliable M-Profile press fitting suitable for water, heating, and potable applications. WRAS approved and built for professional use, it's perfect for quick, leak-free installations.     Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Reducing Tee 35mm x 35mm x 22mm - WATER

The MacPress Reducing Tee (35mm x 35mm x 22mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Reducing Tee 35mm x 35mm x 15mm - WATER

The MacPress Reducing Tee (35mm x 35mm x 15mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Reducing Tee 28mm x 22mm x 28mm - WATER

The MacPress Reducing Tee (28mm x 22mm x 28mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Obtuse Elbow 35mm - WATER

The MacPress 35mm Obtuse Elbow is a WRAS approved press fitting ideal for heating, hot water, and potable systems. Designed with the trusted M-Profile for a secure, leak-free connection. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Street Elbow 35mm - WATER

The MacPress Street Elbow 35mm is a WRAS approved press fitting designed for compact changes in direction on water pipework. Ideal for potable water, heating, and hot water installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Fitting Reducer 54mm x 35mm - WATER

The MacPress Fitting Reducer 54mm x 35mm offers a seamless and secure reduction between pipe sizes in heating, hot water, and potable water systems. WRAS approved and M-profile design for leak-free reliability. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Obtuse Elbow 28mm - GAS

The MacPress 28mm Obtuse Gas Elbow is BS EN 1254-7 approved, featuring a yellow O-ring and gas marking for clear gas system identification. Ideal for gentle directional changes in gas pipework, it delivers a secure, flame-free press connection.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Coupling 42mm - WATER

The MacPress 42mm Coupling is a reliable M-Profile press fitting suitable for water, heating, and potable applications. WRAS approved and built for professional use, it's perfect for quick, leak-free installations.     Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.