MacDonald Plumbing Supplies Refill For The MacPack Endfeed Starter Pack

The Refill For The MacPack Endfeed Starter Pack provides a complete replacement selection of high-quality WRAS approved endfeed fittings from MacDonald Plumbing Supplies. Containing 255 popular 15mm and 22mm fittings, including couplings, 90 degree elbows, equal tees, reducing tees and reducers, this refill pack is designed to replenish your existing MacPack storage case without purchasing another case. Ideal for plumbers and heating engineers who regularly use endfeed fittings on professional installations. Pack Contents 50 x MacEndfeed Coupling 15mm WRAS Approved 25 x MacEndfeed Coupling 22mm WRAS Approved 50 x MacEndfeed 90 Degree Elbow 15mm WRAS Approved 50 x MacEndfeed 90 Degree Elbow 22mm WRAS Approved 25 x MacEndfeed Equal Tee 15mm WRAS Approved 20 x MacEndfeed Equal Tee 22mm WRAS Approved 10 x MacEndfeed Reducing Tee 22mm x 22mm x 15mm WRAS Approved 25 x MacEndfeed Fitting Reducer 22mm x 15mm WRAS Approved

MacDonald Plumbing Supplies MacPack Solder Ring Starter Pack

The MacPack Solder Ring Starter Pack provides a comprehensive selection of high-quality WRAS approved solder ring fittings from MacDonald Plumbing Supplies. Supplied in a practical FatMac storage case, the pack contains popular 15mm and 22mm couplings, elbows, equal tees, reducing tees and reducers, making it ideal for a wide range of plumbing installations. The compact design of the solder ring fittings makes them particularly useful when working in areas where space is limited. Pack Contents 1 x FatMac Storage Case 50 x MacSolder Ring Coupling 15mm WRAS Approved 25 x MacSolder Ring Coupling 22mm WRAS Approved 50 x MacSolder Ring 90 Degree Elbow 15mm WRAS Approved 50 x MacSolder Ring 90 Degree Elbow 22mm WRAS Approved 25 x MacSolder Ring Equal Tee 15mm WRAS Approved 20 x MacSolder Ring Equal Tee 22mm WRAS Approved 10 x MacSolder Ring Reducing Tee 22mm x 22mm x 15mm WRAS Approved 25 x MacSolder Ring Fitting Reducer 22mm x 15mm WRAS Approved

MacDonald Plumbing Supplies Brass ¾ Cap

The Brass 3/4" Cap is a reliable fitting designed to seal off pipe ends in plumbing and heating systems. Manufactured from durable brass, it provides a secure and leak-free connection using a simple compression fitting. Ideal for both temporary and permanent applications, it ensures dependable performance in a wide range of installations.

FRANKISCHE Loctite 55 Pipe Sealant Cord 50m

The Loctite 55 Pipe Sealant Cord 50m is a versatile, non-curing thread sealant designed for fast, reliable and instant full-pressure sealing of both metal and plastic threaded pipes and fittings. Ideal for plumbing, heating, gas and potable water systems, it offers a superior alternative to PTFE tape and hemp. The cord allows for easy adjustment of joints after assembly without compromising the seal. WRAS and NSF/ANSI 61 approved, it provides professional installers with a safe, efficient and mess-free solution for high-performance sealing.

Press Mate Pro Press Lubrication 150ml

The Press Mate Pro Press Lubrication 150ml is a professional-grade dry lubricant designed to improve the performance and longevity of press tools. Formulated with natural oils, it delivers smoother, more consistent crimps while protecting seals and O-rings from damage. Suitable for most press jaws, it reduces friction, wear and drag, helping engineers achieve reliable results with minimal mess on every job.

Rob Pond PressFit 22mm Perfect Pump Valve Pair

The Rob Pond PressFit 22mm Perfect Pump Valve Pair PPV22-PF provides a reliable and efficient solution for connecting circulating pumps in heating systems. Designed with 22mm M profile press connections and 1½" swivel unions, these valves allow quick installation and secure pump isolation. Manufactured from durable nickel plated brass and rated to 16 bar, they offer excellent strength and long-term reliability. Supplied as a matched pair with rubber washers, they ensure a tight seal and simplify installation for professional heating engineers.

MacDonald Plumbing Supplies MacCompression 22mm Slip Coupling

The MacCompression 22mm Slip Couplings provide a dependable solution for repairing or extending 22mm pipework where movement is limited or access is restricted. Designed with a slip function, these couplings slide along the pipe to bridge gaps or replace damaged sections without requiring pipe disassembly. Manufactured to BS EN 1254-2 standards and WRAS approved, they are suitable for potable water systems and professional plumbing installations. Supplied complete with copper olives, they ensure a secure, watertight seal and reliable long term performance.

MacDonald Plumbing Supplies MacCompression 15mm Slip Coupling

The MacCompression 15mm Slip Coupling is a practical and dependable solution for repairing or extending 15mm pipework without the need for additional pipe movement. Designed for ease of installation, this coupling slides along the pipe to bridge gaps or replace damaged sections, making it ideal for maintenance, repair, and retrofit plumbing tasks. Manufactured to BS EN 1254-2 standards and WRAS approved, it ensures reliable performance and suitability for potable water systems. Supplied complete with copper olives, it provides a secure, watertight seal for professional and long lasting installations.

MacDonald Plumbing Supplies MacCompression Reducing Coupling Poly P25 x 22mm

The MacCompression Reducing Coupling Poly P25 x 22mm is designed to connect 25mm MDPE pipe to 22mm pipework quickly and securely. Manufactured from high quality poly material, this compression fitting provides a dependable solution for reducing pipe sizes in cold water supply installations. Kitemarked and WRAS Approved, it meets recognised UK standards for potable water use, making it suitable for both domestic and commercial applications. Its robust construction ensures a long service life, even in demanding ground level or external environments.

MacDonald Plumbing Supplies MacCompression Liners for MDPE 25mm

The MacCompression Liners for MDPE 25mm are designed to provide added strength, security, and reliability when using MDPE compression fittings. Manufactured to a high standard, these pipe liners are both WRAS Approved and Kitemarked, ensuring compliance and performance in potable water applications. By reinforcing the inner wall of the MDPE pipe, they help prevent pipe deformation under compression, guaranteeing a safe and leak-free connection. Trusted by installers, these liners offer peace of mind for long-term durability in underground and above-ground installations.

MacDonald Plumbing Supplies MacPress Reducing Elbow 22mm x 15mm WATER

The MacPress Reducing Elbow 22mm x 15mm WATER is a premium-quality copper press-fit fitting designed for water pipe installations. Providing a secure 90° connection between 22mm and 15mm pipes, it’s ideal for adapting plumbing layouts neatly and efficiently. With WRAS approval and a 20-year warranty, this reducing elbow offers complete peace of mind on reliability and compliance. Its flame-free press-fit design ensures safe, quick installation while maintaining long-lasting performance, making it the perfect choice for professional plumbers.

MacDonald Plumbing Supplies Refill For The MacPack Press Starter Kit For Water 22mm Fittings

The Refill For The MacPack Press Pack For Water 22mm. This refill kit is tailor-made for plumbing professionals who use the MacPress system and need a fresh supply of premium 22mm copper press fittings. Designed for use in potable water, sealed heating systems, and hot water circuits, every fitting is WRAS approved and made for secure, flame-free installation. The pack includes elbows, couplings, equal tees, reducers, and reducing tees – all engineered for reliability and leak-free performance. Supplied in quantities that suit real-world installation demands, this refill pack is a smart, timesaving addition to your MacPack setup. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPack Press Starter Kit For Water 22mm Fittings

The MacPack Press Pack For Water 22mm Fittings is your complete solution for fast, safe, and professional-grade water installations. Designed around the industry-trusted MacPress M-profile press system, this pack includes a hand-picked selection of high-quality 22mm fittings, ideal for use in potable water, heating, and hot water systems. Engineered for clean, flame-free installation, the fittings require no solder, flux, or compound making them perfect for both domestic and commercial environments. Each component is WRAS approved and backed by a 20-year manufacturer’s warranty, ensuring a secure and long-lasting fit every time. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies Refill For The MacPack Press Starter Kit For Water 15mm Fittings

The MacPack Press Refill Pack For Water 15mm Fittings is ideal for topping up your stock of the most-used water press fittings. Designed to match the quality and compatibility of MacPress M profile fittings, this refill pack ensures you always have essential components on hand. With a practical selection of 15mm couplings, elbows, tees, reducers, and reducing tees, it's perfect for professionals working on potable water, hot water, and heating installations. These flame-free fittings provide a fast, clean and safe solution with reliable performance. Fully WRAS approved and BS EN compliant, this pack keeps your installations efficient and up to standard. Not suitable for use with MLCP pipe and fittings. Installation Instructions for Press Fittings 1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPack Press Starter Kit For Water 15mm Fittings

The MacPack Press Pack For Water 15mm Fittings is a purpose-built solution designed for fast, safe, and clean water installations. Ideal for both domestic and commercial applications, this all-in-one pack contains a selection of premium 15mm MacPress water press fittings including couplings, elbows, tees, reducers, and reducing tees. Thanks to its flame-free installation process, it eliminates the need for hot works while maintaining a high standard of performance and safety. Every fitting uses the reliable “M” profile for secure press connections. The included fittings are WRAS approved and manufactured to meet the highest quality and compliance standards. Backed by a 20-year manufacturer’s warranty, this pack offers peace of mind and long-term durability. Installation Instructions for Press Fittings  1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacSolder Ring Adaptor Coupling 22mm x ¾ Imp

The MacSolder Ring Adaptor Coupling 22mm x ¾" Imp provides a seamless connection between 22mm copper pipe and ¾" imperial BSP fittings. Designed for professional-grade reliability, this lead-free solder ring fitting is WRAS approved and complies with BS EN 1254-1. It ensures clean, secure joints in hot and cold water systems and is ideal for use in domestic, commercial, and industrial plumbing applications.

MacDonald Plumbing Supplies MacSolder Ring Obtuse Elbow 35mm

The MacSolder Ring Obtuse Elbow 35mm is a professional-grade copper fitting designed to create smooth directional changes in pipework with an obtuse angle. Featuring a pre-loaded lead-free solder ring, this WRAS-approved fitting ensures fast, secure, and clean joints. Manufactured to BS EN 1254-1 standards, it is suitable for use in hot and cold water systems, central heating, and gas installations. A compact, time-saving solution ideal for tight spaces and precise plumbing work.

MacDonald Plumbing Supplies MacSolder Ring Stop End 35mm

The MacSolder Ring Stop End 35mm is a high-quality copper fitting designed for sealing off the end of a pipe in plumbing and heating systems. Manufactured with lead-free solder and WRAS approved, this stop end is ideal for use with potable water, central heating, and gas systems. The integrated pre-soldered ring allows for fast and secure connections without the need for additional solder, reducing installation time and ensuring a clean, professional finish. This 35mm stop end is particularly useful in tight spaces and is a cost-effective solution for residential or commercial plumbing projects.

MacDonald Plumbing Supplies MacSolder Ring Stop End 42mm

The MacSolder Ring Stop End 42mm is a high-quality copper fitting designed for sealing off the end of a pipe in plumbing and heating systems. Manufactured with lead-free solder and WRAS approved, this stop end is ideal for use with potable water, central heating, and gas systems. The integrated pre-soldered ring allows for fast and secure connections without the need for additional solder, reducing installation time and ensuring a clean, professional finish. This 42mm stop end is particularly useful in tight spaces and is a cost-effective solution for residential or commercial plumbing projects.

MacDonald Plumbing Supplies MacSolder Ring Stop End 54mm

The MacSolder Ring Stop End 54mm is a high-quality copper fitting designed for sealing off the end of a pipe in plumbing and heating systems. Manufactured with lead-free solder and WRAS approved, this stop end is ideal for use with potable water, central heating, and gas systems. The integrated pre-soldered ring allows for fast and secure connections without the need for additional solder, reducing installation time and ensuring a clean, professional finish. This 54mm stop end is particularly useful in tight spaces and is a cost-effective solution for residential or commercial plumbing projects.

MacDonald Plumbing Supplies MacSolder Ring Adaptor Coupling 15mm x ½ Imp

The MacSolder Ring Adaptor Coupling 15mm x ½" Imp is a reliable, pre-soldered fitting designed to connect 15mm copper tube to ½" imperial BSP threads. Manufactured to BS EN 1254-1 standards and WRAS approved for use in potable water systems, this coupling is ideal for both domestic and commercial plumbing. Made with lead-free solder, it provides a secure, permanent joint with clean, professional results every time.

MacDonald Plumbing Supplies MacPress 15mm Stop Cock

The MacPress 15mm Stop Cock offers a secure, leak-proof solution for controlling water flow in residential and commercial plumbing systems. Featuring M Profile press-fit technology, it ensures fast and efficient installation. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 22mm Stop Cock

The MacPress 22mm Stop Cock offers a secure, leak-proof solution for controlling water flow in residential and commercial plumbing systems. Featuring M Profile press-fit technology, it ensures fast and efficient installation. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress 15mm Red/Blue Butterfly T Hand Ball Valve

The MacPress 15mm Red/Blue Butterfly T Hand Ball Valve features an M Profile press-fit design, allowing for quick, secure installation. The colour-coded T handle ensures clear identification and simple operation for hot and cold water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 22mm Red/Blue Butterfly T Hand Ball Valve

The MacPress 22mm Red/Blue Butterfly T Hand Ball Valve features an M Profile press-fit design, allowing for quick, secure installation. The colour-coded T handle ensures clear identification and simple operation for hot and cold water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 28mm Red/Blue Butterfly T Hand Ball Valve

The MacPress 28mm Red/Blue Butterfly T Hand Ball Valve features an M Profile press-fit design, allowing for quick, secure installation. The colour-coded T handle ensures clear identification and simple operation for hot and cold water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 28mm Double Check Valve

The MacPress 28mm Double Check Valve is WRAS & KIWA Certified, offering dependable backflow prevention in potable water systems. Compatible with M Profile press fittings, it is perfect for both residential and commercial applications, ensuring water safety and seamless integration. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress 15mm Isolation Valve

The MacPress 15mm Isolation Valve is a WRAS Approved press-fit solution, perfect for controlling water flow in potable systems. Its M Profile design ensures leak-proof integration with press-fit fittings, ideal for both residential and commercial plumbing applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 22mm Isolation Valve

The MacPress 22mm Isolation Valve is a WRAS Approved press-fit solution, perfect for controlling water flow in potable systems. Its M Profile design ensures leak-proof integration with press-fit fittings, ideal for both residential and commercial plumbing applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress 15mm Isolation Valve FULL BORE

The MacPress 15mm Full Bore Isolation Valve is a WRAS Approved press-fit solution designed to deliver maximum flow efficiency. Featuring M Profile technology and a full bore design, it ensures minimal pressure loss and reliable performance in both residential and commercial plumbing systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 22mm Isolation Valve FULL BORE

The MacPress 22mm Full Bore Isolation Valve is a WRAS Approved press-fit solution designed to deliver maximum flow efficiency. Featuring M Profile technology and a full bore design, it ensures minimal pressure loss and reliable performance in both residential and commercial plumbing systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress 15mm Angled Washing Machine Valve

The MacPress 15mm Angled Washing Machine Valve provides a compact, secure, and easy-to-install solution for washing machine water supply. With M Profile press-fit technology, it ensures a fast, leak-proof connection ideal for domestic plumbing setups. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 15mm Straight Washing Machine Valve

The MacPress 15mm Straight Washing Machine Valve offers a robust and reliable connection for washing machines, utilising M Profile press-fit technology to deliver quick, secure, and leak-proof installations in domestic plumbing systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 15mm Angled Service Valve

The MacPress 15mm Angled Service Valve features WRAS approval and M Profile press-fit connections, providing a quick, secure, and leak-proof solution for isolating water supplies in tight spaces. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 15mm Single Check Valve

The MacPress 15mm Single Check Valve is KIWA Certified and features M Profile press-fit technology, offering secure, leak-free connections. Ideal for safeguarding water systems and preventing backflow in both residential and commercial applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 22mm Single Check Valve

The MacPress 22mm Single Check Valve is KIWA Certified and features M Profile press-fit technology, offering secure, leak-free connections. Ideal for safeguarding water systems and preventing backflow in both residential and commercial applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress 28mm Single Check Valve

The MacPress 28mm Single Check Valve is KIWA Certified and features M Profile press-fit technology, offering secure, leak-free connections. Ideal for safeguarding water systems and preventing backflow in both residential and commercial applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress 22mm Double Check Valve

The MacPress 22mm Double Check Valve is WRAS & KIWA Certified, offering dependable backflow prevention in potable water systems. Compatible with M Profile press fittings, it is perfect for both residential and commercial applications, ensuring water safety and seamless integration. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress 15mm Double Check Valve

The MacPress 15mm Double Check Valve is WRAS & KIWA Certified, offering dependable backflow prevention in potable water systems. Compatible with M Profile press fittings, it is perfect for both residential and commercial applications, ensuring water safety and seamless integration. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacEndfeed Threaded Centre Tee 22mm x 22mm x ½ - WRAS Approved

The MacEndfeed Threaded Centre Tee 22mm x 22mm x ½ is a high-quality, WRAS approved plumbing fitting designed for creating secure and leak-free connections. With a maximum operating temperature of 99°C and a pressure rating of up to 25.0 bar, it is suitable for a wide range of plumbing applications.  

MacDonald Plumbing Supplies MacEndfeed Threaded Centre Tee 15mm x 15mm x ½ - WRAS Approved

The MacEndfeed Threaded Centre Tee 15mm x 15mm x 1/2 is a high-quality plumbing fitting designed for creating strong and leak-free connections. WRAS approved, this centre tee ensures safety and reliability in water supply systems. With a maximum operating temperature of 99°C and a pressure rating of up to 25.0 bar, it is suitable for various applications.

MacDonald Plumbing Supplies MacEndfeed Swept Branch Tee 22mm WRAS APPROVED & KITE MARKED

The Endfeed Swept Branch Tee, 22mm, is a WRAS approved and Kite marked fitting designed for reliable and secure connections in plumbing systems. Its high-quality construction ensures durability and compliance with industry standards.

MacDonald Plumbing Supplies MacCompression Straight Female Adaptor 28mm x ¾

Explore top-quality Compression Female Adaptors, perfect for various applications including central heating and hot & cold water supplies. Crafted with durable brass olives, these fittings ensure easy installation without soldering or heat. WRAS approved and compliant with BSEN1254-2 standards, guaranteeing suitability for potable water and central heating systems.

MacDonald Plumbing Supplies Refill For The MacPack Press Starter Kit For Gas

The Refill For The MacPack Press Starter Pack For Gas is designed to replenish your MacPress Starter Pack 1 with essential components for ongoing gas system installations. It includes 90 fittings to ensure your projects run smoothly and efficiently. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPack Press Starter Kit For Gas

Top up your MacPress fitting stock with the MacPack Press Refill Pack For Water – 15mm Fittings, designed for professional installers who value speed, safety, and simplicity. This refill pack includes 105 premium-quality 15mm M Profile press fittings for water applications – all neatly stored in a robust FatMac case for easy access on-site. Suitable for potable water, heating, and hot water systems, each fitting is WRAS Approved and compatible with standard copper tube. Perfect for topping up your MacPress Water Starter Pack or expanding your on-the-go fitting kit. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacCompression Straight Male Adaptor 10mm x ¼

Discover top-quality Compression Straight Male Adaptors, perfect for various applications including central heating and hot & cold water supplies. This adaptor features durable brass olives and is designed for easy installation without soldering or heat. WRAS approved and compliant with BSEN1254-2 standards, ensuring suitability for potable water and central heating systems.

MacDonald Plumbing Supplies Refill For The MacPack Solder Ring Starter Pack

The Refill For The MacPack Solder Ring Starter Pack provides a complete replacement selection of high-quality WRAS approved solder ring fittings from MacDonald Plumbing Supplies. Containing 255 popular 15mm and 22mm fittings, including couplings, 90 degree elbows, equal tees, reducing tees and reducers, this refill pack is designed to replenish your existing MacPack storage case without purchasing another case. Ideal for plumbers and heating engineers who regularly use solder ring fittings on professional installations. Pack Contents 50 x MacSolder Ring Coupling 15mm WRAS Approved 25 x MacSolder Ring Coupling 22mm WRAS Approved 50 x MacSolder Ring 90 Degree Elbow 15mm WRAS Approved 50 x MacSolder Ring 90 Degree Elbow 22mm WRAS Approved 25 x MacSolder Ring Equal Tee 15mm WRAS Approved 20 x MacSolder Ring Equal Tee 22mm WRAS Approved 10 x MacSolder Ring Reducing Tee 22mm x 22mm x 15mm WRAS Approved 25 x MacSolder Ring Fitting Reducer 22mm x 15mm WRAS Approved

MacDonald Plumbing Supplies MacPack Endfeed Starter Pack

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies Refill For The MacPack Press Starter Kit For Water

The Refill For The MacPack Press Starter Pack For Water provides a comprehensive, professional-grade selection of MacPress M-profile press fittings. Specially curated for potable water and heating systems, this refill pack ensures you have the most commonly used fittings readily available for seamless installation work. From elbows and couplings to equal tees and reducers, each component in this pack is engineered for flame-free, WRAS-approved connections that deliver long-term leak-free performance. Designed to work flawlessly with copper pipe, the refill pack offers dependable quality for installers who demand reliability, efficiency, and peace of mind. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPack Press Starter Kit For Water

The MacPack Press Starter Pack For Water is a comprehensive solution for plumbing professionals working on water system installations. This starter pack includes an essential selection of WRAS Approved MacPress fittings designed for domestic and commercial water applications, including potable water, heating, and hot water systems. All fittings feature a high-performance M-Profile design that ensures fast, secure, and flame-free connections. With no need for hot works, this kit saves time on-site while ensuring full compliance with BS EN standards. Supplied in a durable FatMac case, the pack is ideal for installers looking for reliable, professional-grade fittings. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies FatMac Storage Case MACSNS

The MacDonald Plumbing Supplies FatMac Storage Case MACSNS is a durable and practical storage solution designed to keep tools, fittings and small parts organised. Featuring a Stac N Store design with 12 removable compartments, it allows users to customise storage to suit different items and job requirements. With compact dimensions of 425mm x 360mm x 105mm, it is ideal for both professional plumbers and DIY users who need reliable, portable storage for everyday use.

MacDonald Plumbing Supplies MacPress 22mm Red/Blue Lever Valves M Profile WRAS Approved

The MacPress 22mm Red/Blue Lever Valves M Profile are WRAS approved, offering reliable water flow control for press fit plumbing systems. Featuring convenient red and blue lever handles, they ensure easy operation and compliance with regulatory standards. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 28mm Red/Blue Lever Valves M Profile WRAS Approved

The MacPress 28mm Red/Blue Lever Valves M Profile are WRAS approved, offering reliable water flow control for press fit plumbing systems. Featuring convenient red and blue lever handles, they ensure easy operation and compliance with regulatory standards. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 35mm Red/Blue Lever Valves M Profile WRAS Approved

The MacPress 35mm Red/Blue Lever Valves M Profile are WRAS approved, offering reliable water flow control for press fit plumbing systems. Featuring convenient red and blue lever handles, they ensure easy operation and compliance with regulatory standards. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 42mm Red/Blue Lever Valves M Profile WRAS Approved

The MacPress 42mm Red/Blue Lever Valves M Profile are WRAS approved, offering reliable water flow control for press fit plumbing systems. Featuring convenient red and blue lever handles, they ensure easy operation and compliance with regulatory standards. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 54mm Red/Blue Lever Valves M Profile WRAS Approved

The MacPress 54mm Red/Blue Lever Valves M Profile are WRAS approved, offering reliable water flow control for press fit plumbing systems. Featuring convenient red and blue lever handles, they ensure easy operation and compliance with regulatory standards. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 15mm Red/Blue Lever Valves M Profile WRAS Approved

The MacPress 15mm Red/Blue Lever Valves M Profile are WRAS approved, offering reliable water flow control for press fit plumbing systems. Featuring convenient red and blue lever handles, they ensure easy operation and compliance with regulatory standards. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacEndfeed Female Elbow 22mm x 3/4 WRAS APPROVED & KITE MARKED (COPPER VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications, including central heating and hot & cold water supplies. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies meet BSEN1254 standard and are WRAS approved high quality products. Sizes range from 8mm to 54mm plus fittings are suitable for use with potable water, central heating and gas.

MacDonald Plumbing Supplies MacEndfeed Female Adaptor 28mm x 1 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Male Adaptor 28mm x 1 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Female Adaptor 15mm x 1/4 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Female Adaptor 15mm x 1/2 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Female Adaptor 22mm x 3/4 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Female Adaptor 42mm x 1 1/2 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Female Adaptor 54mm x 2 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Male Adaptor 15mm x 1/4 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Male Adaptor 15mm x 1/2 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Male Adaptor 22mm x 3/4 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Male Adaptor 35mm x 1 1/4 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Male Adaptor 42mm x 1 1/2 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Male Adaptor 54mm x 2 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Male Elbow 15mm x 1/2 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Male Elbow 22mm x 3/4 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Female Elbow 15mm x 1/2 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Female Elbow 22mm x 3/4 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Female Elbow 28mm x 1 WRAS APPROVED (BRASS VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Male Elbow 28mm x 1 WRAS APPROVED & KITE MARKED (COPPER VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications, including central heating and hot & cold water supplies. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies meet BSEN1254 standard and are WRAS approved high quality products. Sizes range from 8mm to 54mm plus fittings are suitable for use with potable water, central heating and gas.

MacDonald Plumbing Supplies MacEndfeed Female Elbow 15mm x 1/2 WRAS APPROVED & KITE MARKED (COPPER VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications, including central heating and hot & cold water supplies. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies meet BSEN1254 standard and are WRAS approved high quality products. Sizes range from 8mm to 54mm plus fittings are suitable for use with potable water, central heating and gas.

MacDonald Plumbing Supplies MacEndfeed Male Adaptor 15mm x 3/4 WRAS APPROVED & KITE MARKED (COPPER VERSION)

Our Endfeed fittings are suitable for use on a wide variety of applications, including central heating and hot & cold water supplies. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies meet BSEN1254 standard and are WRAS approved high quality products. Sizes range from 8mm to 54mm plus fittings are suitable for use with potable water, central heating and gas.

MacDonald Plumbing Supplies MacEndfeed 90 Degree Long Tail Street Elbow 22mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed 90 Degree Long Tail Street Elbow 15mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacPress Female Swivel Coupling 22mm x 1 - WATER

The MacPress Female Swivel Coupling 22mm x 1" is a versatile press fitting designed for quick, flame-free connection between copper pipework and threaded components. WRAS approved and suitable for potable water, it’s ideal for heating and plumbing installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Female Elbow 15mm x ½ - WATER

The MacPress Female Elbow 15mm x ½" is a WRAS approved copper press fitting designed for use in heating, hot water, and potable water systems. With a secure M-profile connection, it's the ideal choice for fast, leak-free installations in professional plumbing setups. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Elbow 22mm x ¾ - WATER

The MacPress Female Elbow 22mm x ¾" is a high-quality copper press fitting designed for use in hot water, heating, and potable water installations. With WRAS approval and M-profile design, it ensures leak-free, efficient, and professional-grade performance. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Elbow 28mm x 1" - WATER

  The MacPress Female Elbow 28mm x 1" is a professional-grade copper press fitting designed for potable water, heating, and hot water systems. Featuring a WRAS-approved M-profile and robust construction, it provides a reliable and permanent leak-free connection. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Male Elbow 15mm x ½ - WATER

The MacPress Male Elbow 15mm x ½" is a WRAS approved, reliable press fitting designed for use in plumbing, heating, and potable water systems. Its versatile design ensures secure, leak-free connections in tight spaces and varied installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Elbow 22mm x ¾ - WATER

The MacPress Male Elbow 22mm x ¾" BSP is a WRAS approved, durable press fitting designed for use in potable water, heating, and hot water systems. Offering a secure, leak-free connection, it is perfect for a wide range of professional plumbing and heating applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Elbow 28mm x 1" - WATER

The MacPress Male Elbow 28mm x 1" BSP is a WRAS approved, high-performance press fitting designed for potable water, heating, and hot water systems. Engineered for professional plumbing applications, it provides reliable, leak-free connections every time. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Wall Plate Elbow 15mm x ½ - WATER

The MacPress Wall Plate Elbow 15mm x ½" BSP is a WRAS approved press fitting suitable for use in potable water, heating, and hot water systems. Designed for secure and reliable plumbing connections, this wall plate elbow provides a long-lasting, leak-free solution. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Coupling 67mm - WATER

The MacPress 67mm Coupling is a reliable M-Profile press fitting suitable for water, heating, and potable applications. WRAS approved and built for professional use, it's perfect for quick, leak-free installations.     Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Reduced Coupling 35mm x 22mm - WATER

The MacPress Reduced Coupling 35mm x 22mm is a WRAS approved copper press fitting designed to securely join different pipe sizes in water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reduced Coupling 42mm x 28mm - WATER

The MacPress Reduced Coupling 42mm x 28mm is a WRAS approved copper press fitting designed to securely join different pipe sizes in water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reduced Coupling 54mm x 28mm - WATER

The MacPress Reduced Coupling 54mm x 28mm is a WRAS approved copper press fitting designed to securely join different pipe sizes in water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Fitting Reducer 54mm x 28mm - WATER

The MacPress Fitting Reducer 54mm x 28mm offers a seamless and secure reduction between pipe sizes in heating, hot water, and potable water systems. WRAS approved and M-profile design for leak-free reliability. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Swivel Coupling 15mm x ½ - WATER

The MacPress Female Swivel Coupling 15mm x ½ is a versatile press fitting designed for quick, flame-free connection between copper pipework and threaded components. WRAS approved and suitable for potable water, it’s ideal for heating and plumbing installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Swivel Coupling 15mm x ¾ - WATER

The MacPress Female Swivel Coupling 15mm x ¾ is a versatile press fitting designed for quick, flame-free connection between copper pipework and threaded components. WRAS approved and suitable for potable water, it’s ideal for heating and plumbing installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Female Swivel Coupling 22mm x ¾ - WATER

The MacPress Female Swivel Coupling 22mm x ¾ is a versatile press fitting designed for quick, flame-free connection between copper pipework and threaded components. WRAS approved and suitable for potable water, it’s ideal for heating and plumbing installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Reducing Tee 35mm x 35mm x 22mm - GAS

The MacPress 35mm x 35mm x 22mm Reducing Tee – GAS is designed for branching 22mm gas lines from 35mm mains. A reliable, WRAS-exempt press-fit fitting for certified gas professionals.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Union Connector 15mm x ½ - WATER

The MacPress Male Union Connector 15mm x ½" BSP is a WRAS approved, high-performance press fitting designed for use in potable water, heating, and hot water systems. This connector provides a secure, leak-free connection for professional plumbing applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Union Connector 22mm x ¾ - WATER

The MacPress Male Union Connector 22mm x ¾" BSP is a WRAS approved, high-performance press fitting designed for use in potable water, heating, and hot water systems. This connector provides a secure, leak-free connection for professional plumbing applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Union Connector 28mm x 1" - WATER

The MacPress Male Union Connector 28mm x 1" BSP is a WRAS approved press fitting ideal for use in potable water, heating, and hot water systems. Providing a secure, leak-free connection, it is a preferred choice for professional plumbing applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Coupling 22mm x 1" - WATER

The MacPress Male Coupling 22mm x 1" delivers a secure, WRAS approved solution for connecting 22mm copper pipe to 1" BSP male threaded fittings in water and heating systems. A professional-grade, flame-free press connection. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Coupling 28mm x 1" - WATER

The MacPress Male Coupling 28mm x 1" is a WRAS approved press fitting designed for connecting 28mm copper pipe to 1" BSP threaded systems. Ideal for potable water, heating, and hot water installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Coupling 35mm x 1¼ - WATER

The MacPress Male Coupling 35mm x 1¼" offers a professional-grade, WRAS approved connection for joining 35mm copper pipe to 1¼" BSP threads. Suitable for use in potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Coupling 42mm x 1½ - WATER

The MacPress Male Coupling 42mm x 1½" is a high-quality WRAS approved press fitting designed for professional use in heating, hot water and potable water systems. Combines a secure press connection with a 1½" BSP male thread. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Coupling 54mm x 2" - WATER

The MacPress Male Coupling 54mm x 2" is a robust WRAS approved press fitting designed for professional plumbing, heating, and potable water systems. It combines a secure press connection with a 2" BSP male thread for versatile installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Partial Crossover 15mm - WATER

The MacPress Partial Crossover 15mm is a high-quality WRAS approved press fitting designed to allow two pipes to pass each other within a compact installation layout for hot, cold and potable water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Partial Crossover 22mm - WATER

The MacPress Partial Crossover 22mm is a high-quality WRAS approved press fitting designed to allow two pipes to pass each other within a compact installation layout for hot, cold and potable water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Full Crossover 15mm - WATER

The MacPress Full Crossover 15mm is a high-quality WRAS approved press fitting designed to allow two pipes to pass each other within a compact installation layout for hot, cold and potable water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Full Crossover 22mm - WATER

The MacPress Full Crossover 22mm is a high-quality WRAS approved press fitting designed to allow two pipes to pass each other within a compact installation layout for hot, cold and potable water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Female Reducing Tee 15mm x 15mm x ½ - WATER

The MacPress Female Reducing Tee 15mm x 15mm x ½ is a compact and durable press fitting designed for potable water, heating, and hot water systems. With WRAS approval and an M-profile press design, it ensures a fast, flame-free installation with secure, leak-free connections. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Reducing Tee 22mm x 22mm x ½ - WATER

The MacPress Female Reducing Tee 22mm x 22mm x ½ is a compact and durable press fitting designed for potable water, heating, and hot water systems. With WRAS approval and an M-profile press design, it ensures a fast, flame-free installation with secure, leak-free connections. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Female Reducing Tee 28mm x 28mm x ½ - WATER

The MacPress Female Reducing Tee 28mm x 28mm x ½ is a compact and durable press fitting designed for potable water, heating, and hot water systems. With WRAS approval and an M-profile press design, it ensures a fast, flame-free installation with secure, leak-free connections. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Female Coupling 15mm x ½ - WATER

The MacPress Female Coupling 15mm x ½" is a high-quality WRAS approved press fitting designed for secure and efficient connections between copper tube and threaded pipework in potable and heating water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Coupling 22mm x ¾ - WATER

The MacPress Female Coupling 22mm x ¾" is a high-quality WRAS approved press fitting designed for secure and efficient connections between copper tube and threaded pipework in potable and heating water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Female Coupling 28mm x 1 - WATER

The MacPress Female Coupling 28mm x 1" is a WRAS approved press fitting designed for connecting copper tube to threaded pipework in potable water, heating, and hot water systems. A secure, flame-free solution for professional installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Coupling 35mm x 1¼ - WATER

The MacPress Female Coupling 35mm x 1¼" is a WRAS approved press-fit connector designed for secure joining of copper pipe to 1¼" BSP threaded fittings in potable, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Coupling 42mm x 1½ - WATER

The MacPress Female Coupling 42mm x 1½" is a high-performance press-fit connector with WRAS approval, perfect for use in heating, hot water, and potable water systems, offering a reliable copper-to-threaded transition. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Coupling 54mm x 2 - WATER

The MacPress Female Coupling 54mm x 2" is a robust WRAS approved press-fit connector designed for high-capacity water systems, suitable for potable, hot water, and heating installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Coupling 15mm x ½ - WATER

The MacPress Male Coupling 15mm x ½ is a compact press fitting designed for seamless connection between copper pipe and ½" BSP threaded components. WRAS approved, it's suitable for use with potable water, heating, and hot water systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Male Coupling 15mm x ¾ - WATER

The MacPress Male Coupling 15mm x ¾ is a high-quality WRAS approved fitting designed to connect 15mm copper pipe to a ¾" BSP male thread. Ideal for potable water, heating, and hot water systems with a secure M-profile press connection.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Coupling 22mm x ½ - WATER

The MacPress Male Coupling 22mm x ½ is a WRAS approved press fitting for connecting 22mm copper pipe to a ½" BSP male thread. Suitable for potable water, hot water, and heating systems, it provides a secure and leak-free connection using M-profile press technology. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Male Coupling 22mm x ¾ - WATER

The MacPress Male Coupling 22mm x ¾ offers a dependable and WRAS approved connection for water and heating systems. Designed to join 22mm copper tube to ¾" BSP male threads, this M-profile press fitting ensures a secure, flame-free installation. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reduced Coupling 22mm x 15mm - WATER

The MacPress Reduced Coupling 22mm x 15mm is a WRAS approved copper press fitting designed to securely join different pipe sizes in water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reduced Coupling 28mm x 15mm - WATER

The MacPress Reduced Coupling 28mm x 15mm is a WRAS approved copper press fitting designed to securely join different pipe sizes in water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reduced Coupling 28mm x 22mm - WATER

The MacPress Reduced Coupling 28mm x 22mm is a WRAS approved copper press fitting designed to securely join different pipe sizes in water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reduced Coupling 35mm x 28mm - WATER

The MacPress Reduced Coupling 35mm x 28mm is a WRAS approved copper press fitting designed to securely join different pipe sizes in water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reduced Coupling 42mm x 35mm - WATER

The MacPress Reduced Coupling 42mm x 35mm is a WRAS approved copper press fitting designed to securely join different pipe sizes in water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reduced Coupling 54mm x 42mm - WATER

The MacPress Reduced Coupling 54mm x 42mm is a WRAS approved copper press fitting designed to securely join different pipe sizes in water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

Rob Pond Brass Back Nut Wide Flanged ½

The ½" Brass Back Nut Wide Flanged is a durable brass fixing nut designed to provide a secure and stable connection for taps, valves, cistern fittings, and other threaded plumbing components. Featuring a wide flange design, it offers increased surface contact and improved load distribution, helping to create a more secure installation. Manufactured from high-quality brass, it delivers excellent strength, corrosion resistance, and long-term reliability in domestic and commercial plumbing systems.

MacDonald Plumbing Supplies Brass Back Nut Wide Flanged ¾

The ¾" Brass Back Nut Wide Flanged is a durable brass fixing nut designed to provide a secure and stable connection for taps, valves, cistern fittings, and other threaded plumbing components. Featuring a wide flange design, it offers increased surface contact and improved load distribution, helping to create a more secure installation. Manufactured from high-quality brass, it delivers excellent strength, corrosion resistance, and long-term reliability in domestic and commercial plumbing systems.

MacDonald Plumbing Supplies MacPress Coupling 54mm - GAS

The MacPress 54mm Gas Coupling features a yellow O-ring and gas conformity marking, offering a safe and certified solution for connecting copper pipe in domestic and commercial gas installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducing Tee 54mm x 54mm x 28mm - WATER

The MacPress Reducing Tee (54mm x 54mm x 28mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Reducing Tee 54mm x 54mm x 42mm - WATER

The MacPress Reducing Tee (54mm x 54mm x 42mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Coupling 42mm - GAS

The MacPress 42mm Gas Coupling features a yellow O-ring and gas conformity marking, offering a safe and certified solution for connecting copper pipe in domestic and commercial gas installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducing Tee 42mm x 42mm x 15mm - WATER

The MacPress Reducing Tee (42mm x 42mm x 15mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Obtuse Elbow 54mm - WATER

The MacPress 54mm Obtuse Elbow is a WRAS approved press fitting ideal for heating, hot water, and potable systems. Designed with the trusted M-Profile for a secure, leak-free connection. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Elbow 54mm - WATER

The MacPress 54mm Elbow is a high-quality press fitting designed for heating, hot water, and potable water systems. WRAS approved and M-profile – trusted by professionals for secure, leak-free joints. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Obtuse Street Elbow 54mm - WATER

The MacPress Obtuse Street Elbow 54mm provides a smooth directional change for water pipework. WRAS approved and ideal for heating, hot water and potable water installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Street Elbow 54mm - WATER

The MacPress Street Elbow 54mm is a WRAS approved press fitting designed for compact changes in direction on water pipework. Ideal for potable water, heating, and hot water installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Coupling 35mm - GAS

The MacPress 35mm Gas Coupling features a yellow O-ring and gas conformity marking, offering a safe and certified solution for connecting copper pipe in domestic and commercial gas installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Equal Tee 54mm - WATER

The MacPress 54mm Equal Tee is a WRAS approved press fitting ideal for connecting three equal pipe runs in water, heating, and potable systems. M-Profile design for reliable, professional installations.   Installation Instructions for Press Fittings 1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducing Tee 54mm x 54mm x 22mm - WATER

The MacPress Reducing Tee (54mm x 54mm x 22mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacCompression Equal Tee 42mm

Discover top-quality Compression Equal Tees, featuring durable brass olives for reliability. Ideal for confined spaces, these fittings eliminate the need for soldering or heat, offering a cost-effective, robust solution. WRAS approved and compliant with BSEN1254-2 standards, they're suitable for potable water and central heating systems alike.

MacDonald Plumbing Supplies MacPress Obtuse Elbow 42mm - WATER

The MacPress 42mm Obtuse Elbow is a WRAS approved press fitting ideal for heating, hot water, and potable systems. Designed with the trusted M-Profile for a secure, leak-free connection. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Obtuse Street Elbow 42mm - WATER

The MacPress Obtuse Street Elbow 42mm provides a smooth directional change for water pipework. WRAS approved and ideal for heating, hot water and potable water installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Stop End 54mm - WATER

The MacPress Stop End 54mm provides a clean and secure termination point for copper pipework in water systems. Ideal for heating, hot water and potable water applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Elbow 42mm - WATER

The MacPress 42mm Elbow is a high-quality press fitting designed for heating, hot water, and potable water systems. WRAS approved and M-profile – trusted by professionals for secure, leak-free joints. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Street Elbow 42mm - WATER

The MacPress Street Elbow 42mm is a WRAS approved press fitting designed for compact changes in direction on water pipework. Ideal for potable water, heating, and hot water installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Slip Coupling 54mm - WATER

The MacPress Slip Coupling 54mm is a WRAS approved press fitting designed for quick, secure pipe repairs and connections on hot water, heating, and potable water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducing Tee 42mm x 42mm x 28mm - WATER

The MacPress Reducing Tee (42mm x 42mm x 28mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Reducing Tee 42mm x 42mm x 22mm - WATER

The MacPress Reducing Tee (42mm x 42mm x 22mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Reducing Tee 42mm x 42mm x 35mm - WATER

The MacPress Reducing Tee (42mm x 42mm x 35mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Equal Tee 42mm - WATER

The MacPress 42mm Equal Tee is a WRAS approved press fitting ideal for connecting three equal pipe runs in water, heating, and potable systems. M-Profile design for reliable, professional installations.   Installation Instructions for Press Fittings 1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies Brass Flange Plug 1"

A secure and reliable plug designed for pipe flanges. Constructed from high-quality brass, this flange plug ensures a tight seal and prevents leakage in flange connections. It is a versatile component used in various industrial and plumbing applications.

MacDonald Plumbing Supplies MacPress Slip Coupling 42mm - WATER

The MacPress Slip Coupling 42mm is a WRAS approved press fitting designed for quick, secure pipe repairs and connections on hot water, heating, and potable water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacCompression Straight Male Adaptor 54mm x 2"

Discover top-quality Compression Straight Male Adaptors, perfect for various applications including central heating and hot & cold water supplies. This adaptor features durable brass olives and is designed for easy installation without soldering or heat. WRAS approved and compliant with BSEN1254-2 standards, ensuring suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacCompression Straight Female Adaptor 54mm x 2"

Explore top-quality Compression Female Adaptors, perfect for various applications including central heating and hot & cold water supplies. Crafted with durable brass olives, these fittings ensure easy installation without soldering or heat. WRAS approved and compliant with BSEN1254-2 standards, guaranteeing suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacPress Reducing Tee 35mm x 35mm x 28mm - WATER

The MacPress Reducing Tee (35mm x 35mm x 28mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Equal Tee 35mm - WATER

The MacPress 35mm Equal Tee is a WRAS approved press fitting ideal for connecting three equal pipe runs in water, heating, and potable systems. M-Profile design for reliable, professional installations.   Installation Instructions for Press Fittings 1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacCompression Female Elbow 42mm x 1½

Discover top-quality Compression Female Elbows, perfect for various applications including central heating and hot & cold water supplies. Crafted with durable brass olives, these fittings ensure easy installation without soldering or heat. WRAS approved and compliant with BSEN1254-2 standards, guaranteeing suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacCompression Male Elbow 42mm x 1½

Discover top-quality Compression Male Elbows, ranging from 15mm to 54mm, ideal for various applications including central heating and hot & cold water supplies. Crafted with durable brass olives, these fittings ensure easy installation without soldering or heat. WRAS approved and compliant with BSEN1254-2 standards, guaranteeing suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacCompression Reducing Coupling 35mm x 28mm

Discover top-quality Compression Reducing Couplings, featuring durable brass olives for reliability. Ideal for confined spaces, these fittings eliminate the need for soldering or heat, offering a cost-effective, robust solution. WRAS approved and compliant with BSEN1254-2 standards, they're suitable for potable water and central heating systems alike.

MacDonald Plumbing Supplies MacPress Fitting Reducer 54mm x 42mm - WATER

The MacPress Fitting Reducer 54mm x 42mm offers a seamless and secure reduction between pipe sizes in heating, hot water, and potable water systems. WRAS approved and M-profile design for leak-free reliability. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Stop End 42mm - WATER

The MacPress Stop End 42mm provides a clean and secure termination point for copper pipework in water systems. Ideal for heating, hot water and potable water applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacSolder Ring Equal Tee 54mm

Our Solder Ring fittings are manufactured with lead free solder and are suitable for use with potable water, central heating and gas. Solder Ring Fittings benefit from a pre-soldered ring that saves time when installing new pipework or repairing and old run.

MacDonald Plumbing Supplies MacCompression Coupling 54mm

Our Compression fittings are suitable for use on a wide variety of applications, including central heating and hot & cold water supplies. No soldering or heat required, these fittings are ideal for use in areas with limited space, and are a cost effective but robust solution.

MacDonald Plumbing Supplies MacPress Coupling 54mm - WATER

The MacPress 54mm Coupling is a reliable M-Profile press fitting suitable for water, heating, and potable applications. WRAS approved and built for professional use, it's perfect for quick, leak-free installations.     Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacCompression Elbow 54mm

Discover top-quality Compression Elbows, featuring durable brass olives for reliability. Ideal for confined spaces, these fittings eliminate the need for soldering or heat, offering a cost-effective, robust solution. WRAS approved and compliant with BSEN1254-2 standards, they're suitable for potable water and central heating systems alike.

MacDonald Plumbing Supplies MacPress Reducing Tee 35mm x 35mm x 22mm - WATER

The MacPress Reducing Tee (35mm x 35mm x 22mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Reducing Tee 35mm x 35mm x 15mm - WATER

The MacPress Reducing Tee (35mm x 35mm x 15mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacCompression Elbow 42mm

Discover top-quality Compression Elbows, featuring durable brass olives for reliability. Ideal for confined spaces, these fittings eliminate the need for soldering or heat, offering a cost-effective, robust solution. WRAS approved and compliant with BSEN1254-2 standards, they're suitable for potable water and central heating systems alike.

MacDonald Plumbing Supplies MacPress Reducing Tee 28mm x 22mm x 28mm - WATER

The MacPress Reducing Tee (28mm x 22mm x 28mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Obtuse Elbow 35mm - WATER

The MacPress 35mm Obtuse Elbow is a WRAS approved press fitting ideal for heating, hot water, and potable systems. Designed with the trusted M-Profile for a secure, leak-free connection. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Street Elbow 35mm - WATER

The MacPress Street Elbow 35mm is a WRAS approved press fitting designed for compact changes in direction on water pipework. Ideal for potable water, heating, and hot water installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacCompression Stop End 54mm

Discover top-quality Compression Stop Ends, perfect for various applications including central heating and hot & cold water supplies. No soldering or heat required, these fittings are convenient for confined spaces, offering a cost-effective and reliable solution. WRAS approved and compliant with BSEN1254-2 standards, ensuring suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacPress Fitting Reducer 54mm x 35mm - WATER

The MacPress Fitting Reducer 54mm x 35mm offers a seamless and secure reduction between pipe sizes in heating, hot water, and potable water systems. WRAS approved and M-profile design for leak-free reliability. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Coupling 42mm - WATER

The MacPress 42mm Coupling is a reliable M-Profile press fitting suitable for water, heating, and potable applications. WRAS approved and built for professional use, it's perfect for quick, leak-free installations.     Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Slip Coupling 35mm - WATER

The MacPress Slip Coupling 35mm is a WRAS approved press fitting designed for quick, secure pipe repairs and connections on hot water, heating, and potable water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Elbow 35mm - WATER

The MacPress 35mm Elbow is a high-quality press fitting designed for heating, hot water, and potable water systems. WRAS approved and M-profile – trusted by professionals for secure, leak-free joints. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacCompression Equal Tee 35mm

Discover top-quality Compression Equal Tees, featuring durable brass olives for reliability. Ideal for confined spaces, these fittings eliminate the need for soldering or heat, offering a cost-effective, robust solution. WRAS approved and compliant with BSEN1254-2 standards, they're suitable for potable water and central heating systems alike.

MacDonald Plumbing Supplies MacPress Obtuse Street Elbow 35mm - WATER

The MacPress Obtuse Street Elbow 35mm provides a smooth directional change for water pipework. WRAS approved and ideal for heating, hot water and potable water installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducing Tee 28mm x 22mm x 22mm - WATER

The MacPress Reducing Tee (28mm x 22mm x 22mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacSolder Ring Equal Tee 42mm

Our Solder Ring fittings are manufactured with lead free solder and are suitable for use with potable water, central heating and gas. Solder Ring Fittings benefit from a pre-soldered ring that saves time when installing new pipework or repairing and old run.

MacDonald Plumbing Supplies MacSolder Ring Obtuse Elbow 54mm

Our Solder Ring fittings are manufactured with lead free solder and are suitable for use with potable water, central heating and gas. Solder Ring Fittings benefit from a pre-soldered ring that saves time when installing new pipework or repairing and old run.

MacDonald Plumbing Supplies MacPress Fitting Reducer 42mm x 35mm - WATER

The MacPress Fitting Reducer 42mm x 35mm offers a seamless and secure reduction between pipe sizes in heating, hot water, and potable water systems. WRAS approved and M-profile design for leak-free reliability. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Fitting Reducer 42mm x 28mm - WATER

The MacPress Fitting Reducer 42mm x 28mm offers a seamless and secure reduction between pipe sizes in heating, hot water, and potable water systems. WRAS approved and M-profile design for leak-free reliability. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacCompression Straight Female Adaptor 42mm x 1½

Explore top-quality Compression Female Adaptors, perfect for various applications including central heating and hot & cold water supplies. Crafted with durable brass olives, these fittings ensure easy installation without soldering or heat. WRAS approved and compliant with BSEN1254-2 standards, guaranteeing suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacCompression Straight Male Adaptor 42mm x 1½

Discover top-quality Compression Straight Male Adaptors, perfect for various applications including central heating and hot & cold water supplies. This adaptor features durable brass olives and is designed for easy installation without soldering or heat. WRAS approved and compliant with BSEN1254-2 standards, ensuring suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacCompression Male Elbow 35mm x 1¼

Discover top-quality Compression Male Elbows, ranging from 15mm to 54mm, ideal for various applications including central heating and hot & cold water supplies. Crafted with durable brass olives, these fittings ensure easy installation without soldering or heat. WRAS approved and compliant with BSEN1254-2 standards, guaranteeing suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacPress Reducing Tee 28mm x 28mm x 22mm - WATER

The MacPress Reducing Tee (28mm x 28mm x 22mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacCompression Female Elbow 35mm x 1¼

Discover top-quality Compression Female Elbows, perfect for various applications including central heating and hot & cold water supplies. Crafted with durable brass olives, these fittings ensure easy installation without soldering or heat. WRAS approved and compliant with BSEN1254-2 standards, guaranteeing suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacCompression Coupling 42mm

Our Compression fittings are suitable for use on a wide variety of applications, including central heating and hot & cold water supplies. No soldering or heat required, these fittings are ideal for use in areas with limited space, and are a cost effective but robust solution.

MacDonald Plumbing Supplies MacPress Fitting Reducer 42mm x 22mm - WATER

The MacPress Fitting Reducer 42mm x 22mm offers a seamless and secure reduction between pipe sizes in heating, hot water, and potable water systems. WRAS approved and M-profile design for leak-free reliability. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Obtuse Elbow 28mm - WATER

The MacPress 28mm Obtuse Elbow is a WRAS approved press fitting ideal for heating, hot water, and potable systems. Designed with the trusted M-Profile for a secure, leak-free connection. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacCompression Stop End 42mm

Discover top-quality Compression Stop Ends, perfect for various applications including central heating and hot & cold water supplies. No soldering or heat required, these fittings are convenient for confined spaces, offering a cost-effective and reliable solution. WRAS approved and compliant with BSEN1254-2 standards, ensuring suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacPress Equal Tee 28mm - WATER

The MacPress 28mm Equal Tee is a WRAS approved press fitting ideal for connecting three equal pipe runs in water, heating, and potable systems. M-Profile design for reliable, professional installations.   Installation Instructions for Press Fittings 1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacSolder Ring Equal Tee 35mm

Our Solder Ring fittings are manufactured with lead free solder and are suitable for use with potable water, central heating and gas. Solder Ring Fittings benefit from a pre-soldered ring that saves time when installing new pipework or repairing and old run.

MacDonald Plumbing Supplies MacCompression Reducing Set 3 Piece 35mm x 15mm

Discover top-quality Compression Reducing Sets, perfect for various applications including central heating and hot & cold water supplies. This 3-piece set includes high-quality compression fittings with brass olives, offering a reliable solution for areas with limited space. WRAS approved and compliant with BSEN1254-2 standards, ensuring suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacCompression Reducing Set 3 Piece 35mm x 28mm

Discover top-quality Compression Reducing Sets, perfect for various applications including central heating and hot & cold water supplies. This 3-piece set includes high-quality compression fittings with brass olives, offering a reliable solution for areas with limited space. WRAS approved and compliant with BSEN1254-2 standards, ensuring suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacPress Street Elbow 28mm - WATER

The MacPress Street Elbow 28mm is a WRAS approved press fitting designed for compact changes in direction on water pipework. Ideal for potable water, heating, and hot water installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacCompression Straight Male Adaptor 35mm x 1¼

Discover top-quality Compression Straight Male Adaptors, perfect for various applications including central heating and hot & cold water supplies. This adaptor features durable brass olives and is designed for easy installation without soldering or heat. WRAS approved and compliant with BSEN1254-2 standards, ensuring suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacCompression Elbow 35mm

Discover top-quality Compression Elbows, featuring durable brass olives for reliability. Ideal for confined spaces, these fittings eliminate the need for soldering or heat, offering a cost-effective, robust solution. WRAS approved and compliant with BSEN1254-2 standards, they're suitable for potable water and central heating systems alike.

MacDonald Plumbing Supplies MacEndfeed Equal Tee 54mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacSolder Ring Equal Elbow 54mm

Our Solder Ring fittings are manufactured with lead free solder and are suitable for use with potable water, central heating and gas. Solder Ring Fittings benefit from a pre-soldered ring that saves time when installing new pipework or repairing and old run.

MacDonald Plumbing Supplies MacPress Reducing Tee 28mm x 28mm x 15mm - WATER

The MacPress Reducing Tee (28mm x 28mm x 15mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacCompression Repair Coupling 22mm

Introducing our Compression Repair Coupling 22mm, offering quick installation and disassembly for efficient plumbing repairs. Compatible with copper, PE, and PEX pipes, this coupling is widely used and versatile. Its reusable design ensures cost-effective repairs, providing convenience and reliability for various plumbing systems.

MacDonald Plumbing Supplies MacPress Stop End 35mm - WATER

The MacPress Stop End 35mm provides a clean and secure termination point for copper pipework in water systems. Ideal for heating, hot water and potable water applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Obtuse Street Elbow 28mm - WATER

The MacPress Obtuse Street Elbow 28mm provides a smooth directional change for water pipework. WRAS approved and ideal for heating, hot water and potable water installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducing Tee 22mm x 15mm x 15mm - WATER

The MacPress Reducing Tee (22mm x 15mm x 15mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Coupling 35mm - WATER

The MacPress 35mm Coupling is a reliable M-Profile press fitting suitable for water, heating, and potable applications. WRAS approved and built for professional use, it's perfect for quick, leak-free installations.     Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacSolder Ring Fitting Reducer 42mm x 35mm

Our Solder Ring fittings are manufactured with lead free solder and are suitable for use with potable water, central heating and gas. Solder Ring Fittings benefit from a pre-soldered ring that saves time when installing new pipework or repairing and old run.

MacDonald Plumbing Supplies MacCompression Repair Coupling 15mm

Introducing our Compression Repair Coupling 15mm, offering quick installation and disassembly for efficient plumbing repairs. Compatible with copper, PE, and PEX pipes, this coupling is widely used and versatile. Its reusable design ensures cost-effective repairs, providing convenience and reliability for various plumbing systems.

MacDonald Plumbing Supplies MacPress Fitting Reducer 35mm x 28mm - WATER

The MacPress Fitting Reducer 35mm x 28mm offers a seamless and secure reduction between pipe sizes in heating, hot water, and potable water systems. WRAS approved and M-profile design for leak-free reliability. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducing Tee 22mm x 15mm x 22mm - WATER

The MacPress Reducing Tee (22mm x 15mm x 22mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacCompression Straight Male Adaptor 28mm x ¾

Discover top-quality Compression Straight Male Adaptors, perfect for various applications including central heating and hot & cold water supplies. This adaptor features durable brass olives and is designed for easy installation without soldering or heat. WRAS approved and compliant with BSEN1254-2 standards, ensuring suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacPress Coupling 28mm - GAS

The MacPress 28mm Gas Coupling features a yellow O-ring and gas conformity marking, offering a safe and certified solution for connecting copper pipe in domestic and commercial gas installations. Installation Instructions for Press Fittings 1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Slip Coupling 28mm - WATER

The MacPress Slip Coupling 28mm is a WRAS approved press fitting designed for quick, secure pipe repairs and connections on hot water, heating, and potable water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacCompression Coupling 35mm

Our Compression fittings are suitable for use on a wide variety of applications, including central heating and hot & cold water supplies. No soldering or heat required, these fittings are ideal for use in areas with limited space, and are a cost effective but robust solution.

MacDonald Plumbing Supplies MacCompression Straight Female Adaptor 35mm x 1¼

Explore top-quality Compression Female Adaptors, perfect for various applications including central heating and hot & cold water supplies. Crafted with durable brass olives, these fittings ensure easy installation without soldering or heat. WRAS approved and compliant with BSEN1254-2 standards, guaranteeing suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacSolder Ring Bent Tap Connector 22mm x ¾

Our Solder Ring fittings are manufactured with lead free solder and are suitable for use with potable water, central heating and gas. Solder Ring Fittings benefit from a pre-soldered ring that saves time when installing new pipework or repairing and old run.

MacDonald Plumbing Supplies MacPress Fitting Reducer 35mm x 22mm - WATER

The MacPress Fitting Reducer 35mm x 22mm offers a seamless and secure reduction between pipe sizes in heating, hot water, and potable water systems. WRAS approved and M-profile design for leak-free reliability. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacSolder Ring Reducing Tee 35mm x 35mm x 15mm

Our Solder Ring fittings are manufactured with lead free solder and are suitable for use with potable water, central heating and gas. Solder Ring Fittings benefit from a pre-soldered ring that saves time when installing new pipework or repairing and old run.

MacDonald Plumbing Supplies MacSolder Ring Reducing Tee 35mm x 35mm x 22mm

Our Solder Ring fittings are manufactured with lead free solder and are suitable for use with potable water, central heating and gas. Solder Ring Fittings benefit from a pre-soldered ring that saves time when installing new pipework or repairing and old run.

MacDonald Plumbing Supplies MacSolder Ring Obtuse Elbow 42mm

Our Solder Ring fittings are manufactured with lead free solder and are suitable for use with potable water, central heating and gas. Solder Ring Fittings benefit from a pre-soldered ring that saves time when installing new pipework or repairing and old run.

MacDonald Plumbing Supplies MacPress Elbow 28mm - WATER

The MacPress 28mm Elbow is a high-quality press fitting designed for heating, hot water, and potable water systems. WRAS approved and M-profile – trusted by professionals for secure, leak-free joints. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacCompression Stop End 35mm

Discover top-quality Compression Stop Ends, perfect for various applications including central heating and hot & cold water supplies. No soldering or heat required, these fittings are convenient for confined spaces, offering a cost-effective and reliable solution. WRAS approved and compliant with BSEN1254-2 standards, ensuring suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacEndfeed 90 Degree Street Elbow 54mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacCompression Equal Tee 28mm

Discover top-quality Compression Equal Tees, featuring durable brass olives for reliability. Ideal for confined spaces, these fittings eliminate the need for soldering or heat, offering a cost-effective, robust solution. WRAS approved and compliant with BSEN1254-2 standards, they're suitable for potable water and central heating systems alike.

MacDonald Plumbing Supplies MacPress Stop End 28mm - WATER

The MacPress Stop End 28mm provides a clean and secure termination point for copper pipework in water systems. Ideal for heating, hot water and potable water applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Fitting Reducer 28mm x 22mm - WATER

The MacPress Fitting Reducer 28mm x 22mm offers a seamless and secure reduction between pipe sizes in heating, hot water, and potable water systems. WRAS approved and M-profile design for leak-free reliability. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacSolder Ring Reducing Tee 28mm x 28mm x 22mm

Our Solder Ring fittings are manufactured with lead free solder and are suitable for use with potable water, central heating and gas. Solder Ring Fittings benefit from a pre-soldered ring that saves time when installing new pipework or repairing and old run.

MacDonald Plumbing Supplies MacSolder Ring Reducing Tee 28mm x 22mm x 22mm

Our Solder Ring fittings are manufactured with lead free solder and are suitable for use with potable water, central heating and gas. Solder Ring Fittings benefit from a pre-soldered ring that saves time when installing new pipework or repairing and old run.

MacDonald Plumbing Supplies MacPress Coupling 28mm - WATER

The MacPress 28mm Coupling is a reliable M-Profile press fitting suitable for water, heating, and potable applications. WRAS approved and built for professional use, it's perfect for quick, leak-free installations.     Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Reducing Tee 22mm x 22mm x 15mm - WATER

The MacPress Reducing Tee (22mm x 22mm x 15mm) is a WRAS approved press fitting designed for potable water, heating, and hot water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacCompression Threaded Centre Tee 22mm x 22mm x ¾

Discover top-quality Compression Threaded Centre Tees, featuring durable brass olives for reliability. Ideal for confined spaces, these fittings eliminate the need for soldering or heat, offering a cost-effective, robust solution. WRAS approved and compliant with BSEN1254-2 standards, they're suitable for potable water and central heating systems alike.

MacDonald Plumbing Supplies MacSolder Ring Reducing Tee 28mm x 22mm x 28mm

Our Solder Ring fittings are manufactured with lead free solder and are suitable for use with potable water, central heating and gas. Solder Ring Fittings benefit from a pre-soldered ring that saves time when installing new pipework or repairing and old run.

MacDonald Plumbing Supplies MacSolder Ring Reducing Tee 28mm x 15mm x 28mm

Our Solder Ring fittings are manufactured with lead free solder and are suitable for use with potable water, central heating and gas. Solder Ring Fittings benefit from a pre-soldered ring that saves time when installing new pipework or repairing and old run.

MacDonald Plumbing Supplies Brass Flange Plug 1¼"

A secure and reliable plug designed for pipe flanges. Constructed from high-quality brass, this flange plug ensures a tight seal and prevents leakage in flange connections. It is a versatile component used in various industrial and plumbing applications.

MacDonald Plumbing Supplies MacCompression Reducing Tee 28mm x 28mm x 15mm

Discover top-quality Compression Reducing Tees, featuring durable brass olives for reliability. Ideal for confined spaces, these fittings eliminate the need for soldering or heat, offering a cost-effective, robust solution. WRAS approved and compliant with BSEN1254-2 standards, they're suitable for potable water and central heating systems alike.

MacDonald Plumbing Supplies MacCompression Reducing Tee 28mm x 28mm x 22mm

Discover top-quality Compression Reducing Tees, featuring durable brass olives for reliability. Ideal for confined spaces, these fittings eliminate the need for soldering or heat, offering a cost-effective, robust solution. WRAS approved and compliant with BSEN1254-2 standards, they're suitable for potable water and central heating systems alike.

MacDonald Plumbing Supplies MacSolder Ring Fitting Reducer 42mm x 28mm

Our Solder Ring fittings are manufactured with lead free solder and are suitable for use with potable water, central heating and gas. Solder Ring Fittings benefit from a pre-soldered ring that saves time when installing new pipework or repairing and old run.

MacDonald Plumbing Supplies MacSolder Ring Reducing Tee 28mm x 28mm x 15mm

Our Solder Ring fittings are manufactured with lead free solder and are suitable for use with potable water, central heating and gas. Solder Ring Fittings benefit from a pre-soldered ring that saves time when installing new pipework or repairing and old run.

MacDonald Plumbing Supplies MacEndfeed 90 Degree Street Elbow 42mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacPress Equal Tee 22mm - WATER

The MacPress 22mm Equal Tee is a WRAS approved press fitting ideal for connecting three equal pipe runs in water, heating, and potable systems. M-Profile design for reliable, professional installations.   Installation Instructions for Press Fittings 1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies Brass Socket FxF 1/8"

A high-quality brass fitting designed to connect two female threaded pipes or fittings. It provides a durable and reliable connection for various plumbing and industrial applications. Crafted with precision and built to last, this brass socket ensures secure and leak-free connections.

MacDonald Plumbing Supplies MacEndfeed Equal Tee 42mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacSolder Ring Equal Elbow 42mm

Our Solder Ring fittings are manufactured with lead free solder and are suitable for use with potable water, central heating and gas. Solder Ring Fittings benefit from a pre-soldered ring that saves time when installing new pipework or repairing and old run.

MacDonald Plumbing Supplies MacSolder Ring Coupling 54mm

Our Solder Ring fittings are manufactured with lead free solder and are suitable for use with potable water, central heating and gas. Solder Ring Fittings benefit from a pre-soldered ring that saves time when installing new pipework or repairing and old run. They are ideal for use in areas of limited space and are a cost effective lightweight option. Solder Ring fittings from MacDonald Plumbing Supplies are WRAS approved and meet BSEN1254 standards. Sizes range from 8mm to 54mm.

MacDonald Plumbing Supplies MacPress Slip Coupling 22mm - WATER

The MacPress Slip Coupling 22mm is a WRAS approved press fitting designed for quick, secure pipe repairs and connections on hot water, heating, and potable water systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.