Press Mate Pro Press Lubrication 150ml

The Press Mate Pro Press Lubrication 150ml is a professional-grade dry lubricant designed to improve the performance and longevity of press tools. Formulated with natural oils, it delivers smoother, more consistent crimps while protecting seals and O-rings from damage. Suitable for most press jaws, it reduces friction, wear and drag, helping engineers achieve reliable results with minimal mess on every job.

MacDonald Plumbing Supplies Refill For The MacPack Press Starter Kit For Gas

The Refill For The MacPack Press Starter Pack For Gas is designed to replenish your MacPress Starter Pack 1 with essential components for ongoing gas system installations. It includes 90 fittings to ensure your projects run smoothly and efficiently. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPack Press Starter Kit For Gas

Top up your MacPress fitting stock with the MacPack Press Refill Pack For Water – 15mm Fittings, designed for professional installers who value speed, safety, and simplicity. This refill pack includes 105 premium-quality 15mm M Profile press fittings for water applications – all neatly stored in a robust FatMac case for easy access on-site. Suitable for potable water, heating, and hot water systems, each fitting is WRAS Approved and compatible with standard copper tube. Perfect for topping up your MacPress Water Starter Pack or expanding your on-the-go fitting kit. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.