Gledhill 1200 x 450 Direct BEDCT01

The Gledhill 1200 x 450 Direct Economy 7 Combination Cylinder is designed for properties using electric off-peak tariffs such as Economy 7. Ideal for apartments and homes without loft space, it combines a water cylinder and feed tank, removing the need for a separate cold water tank. With a 10-year warranty, low standing heat loss, and compatibility with both Economy 7 and Economy 10 tariffs, it’s a cost-effective and efficient solution for heating domestic hot water.

Gledhill 1050 x 400 Direct BEDC01

The Economy 7 range of domestic hot water cylinders have been designed to maximise the heating potential electric off-peak tariffs.  

Gledhill SL Plus Indirect 400 EE Open Vented PLUIN400OV

The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water. The coil’s corrugated design gives much faster recovery times than can be achieved with plain tube coils. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note all indirect models come with an on-peak back-up immersion but only the 250, 300 and 400 litre models are supplied with an additional off-peak immersion.)

Gledhill SL Pro Indirect 180 HORIZONTAL PROIN180H

Available in 180 Litres, 210 Litres, 250 Litres & 300 Litres

Gledhill SL Pro Indirect 210 HORIZONTAL PROIN210H

Available in 180 Litres, 210 Litres, 250 Litres & 300 Litres

Gledhill SL Pro Indirect 250 HORIZONTAL PROIN250H

Available in 180 Litres, 210 Litres, 250 Litres & 300 Litres

Gledhill SL Pro Indirect 300 HORIZONTAL PROIN300H

Available in 180 Litres, 210 Litres, 250 Litres & 300 Litres

Gledhill SL Plus Indirect 150 EE Open Vented PLUIN150OV

The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water. The coil’s corrugated design gives much faster recovery times than can be achieved with plain tube coils. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note all indirect models come with an on-peak back-up immersion but only the 250, 300 and 400 litre models are supplied with an additional off-peak immersion.)

Gledhill SL Plus Indirect 180 EE Open Vented PLUIN180OV

The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water. The coil’s corrugated design gives much faster recovery times than can be achieved with plain tube coils. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note all indirect models come with an on-peak back-up immersion but only the 250, 300 and 400 litre models are supplied with an additional off-peak immersion.)

Gledhill SL Plus Indirect 210 EE Open Vented PLUIN210OV

The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water. The coil’s corrugated design gives much faster recovery times than can be achieved with plain tube coils. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note all indirect models come with an on-peak back-up immersion but only the 250, 300 and 400 litre models are supplied with an additional off-peak immersion.)

Gledhill SL Plus Indirect 250 EE Open Vented PLUIN250OV

The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water. The coil’s corrugated design gives much faster recovery times than can be achieved with plain tube coils. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note all indirect models come with an on-peak back-up immersion but only the 250, 300 and 400 litre models are supplied with an additional off-peak immersion.)

Gledhill SL Plus Direct 250 EE Open Vented PLUDR250OV

The direct model comes complete with two immersions, one for on-peak use and one for off-peak use. This allows the store of water to be heated utilising off-peak electricity, making the unit extremely efficient. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note the 90 litre model is only supplied with one immersion.)

Gledhill SL Plus Direct 300 EE Open Vented PLUDR300OV

The direct model comes complete with two immersions, one for on-peak use and one for off-peak use. This allows the store of water to be heated utilising off-peak electricity, making the unit extremely efficient. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note the 90 litre model is only supplied with one immersion.)

Gledhill SL Plus Indirect 90 EE Open Vented PLUIN090OV

The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water. The coil’s corrugated design gives much faster recovery times than can be achieved with plain tube coils. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note all indirect models come with an on-peak back-up immersion but only the 250, 300 and 400 litre models are supplied with an additional off-peak immersion.)

Gledhill SL Plus Indirect 120 EE Open Vented PLUIN120OV

The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water. The coil’s corrugated design gives much faster recovery times than can be achieved with plain tube coils. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note all indirect models come with an on-peak back-up immersion but only the 250, 300 and 400 litre models are supplied with an additional off-peak immersion.)

Gledhill SL Plus Direct 90 EE Open Vented PLUDR090OV

The direct model comes complete with two immersions, one for on-peak use and one for off-peak use. This allows the store of water to be heated utilising off-peak electricity, making the unit extremely efficient. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note the 90 litre model is only supplied with one immersion.)

Gledhill SL Plus Direct 120 EE Open Vented PLUDR120OV

The direct model comes complete with two immersions, one for on-peak use and one for off-peak use. This allows the store of water to be heated utilising off-peak electricity, making the unit extremely efficient. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note the 90 litre model is only supplied with one immersion.)

Gledhill SL Plus Direct 150 EE Open Vented PLUDR150OV

The direct model comes complete with two immersions, one for on-peak use and one for off-peak use. This allows the store of water to be heated utilising off-peak electricity, making the unit extremely efficient. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note the 90 litre model is only supplied with one immersion.)

Gledhill SL Plus Direct 180 EE Open Vented PLUDR180OV

The direct model comes complete with two immersions, one for on-peak use and one for off-peak use. This allows the store of water to be heated utilising off-peak electricity, making the unit extremely efficient. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note the 90 litre model is only supplied with one immersion.)

Gledhill SL Plus Direct 210 EE Open Vented PLUDR210OV

The direct model comes complete with two immersions, one for on-peak use and one for off-peak use. This allows the store of water to be heated utilising off-peak electricity, making the unit extremely efficient. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note the 90 litre model is only supplied with one immersion.)

Gledhill 1800 x 450 Indirect 10M WH BIND26

Manufactured to BS1566 and 2010 Part L1B compliant, these cylinders have strong environmental credentials including; • industry leading 35mm HCFC free insulation • exceptionally low standing heat loss, in anticipation of EUP regulations • insulation incorporates Polyol which is derived from Rapeseed oil - a fully renewable resource, with an industry leading Global Warming Potential of 0.7 • with a copper internal cylinder, the product is fully recyclable at the end of its working life • manufactured at 9 locations in the UK, the cylinders have a lower carbon footprint derived from transportation than is typical in the industry

Gledhill 900 x 400 Indirect Vented REPLAcyl SEREP36X16IND

Gledhill Replacyl Stainless Steel Vented Cylinder - Direct Connection is a replacement for copper equivalent having BS1566 tapping heights.

Gledhill 900 x 450 Indirect Vented REPLAcyl SEREP36X18IND

Gledhill Replacyl Stainless Steel Vented Cylinder - Direct Connection is a replacement for copper equivalent having BS1566 tapping heights.

Gledhill 1050X 400 Indirect Vented REPLAcyl SEREP42X16IND

Gledhill Replacyl Stainless Steel Vented Cylinder - Direct Connection is a replacement for copper equivalent having BS1566 tapping heights.

Gledhill 1050X 450 Indirect Vented REPLAcyl SEREP42X18IND

Gledhill Replacyl Stainless Steel Vented Cylinder - Direct Connection is a replacement for copper equivalent having BS1566 tapping heights.

Gledhill 1200 x 450 Indirect Vented REPLAcyl SEREP48X18IND

Gledhill Replacyl Stainless Steel Vented Cylinder - Direct Connection is a replacement for copper equivalent having BS1566 tapping heights.

Gledhill 1500 x 450 Direct BEDC05

The Economy 7 range of domestic hot water cylinders have been designed to maximise the heating potential electric off-peak tariffs.

Gledhill 1400 x 450 Indirect Combi Tank BICOM06

The combination cylinder is specifically designed to be installed into properties without a loft space ie apartments etc. With the feed tank being incorporated into the combination unit, a separate cold water storage tank is not required, therefore installation is simplified and costs reduced.

Gledhill 1050 x 450 Indirect Combi Tank BICOM04

The combination cylinder is specifically designed to be installed into properties without a loft space ie apartments etc. With the feed tank being incorporated into the combination unit, a separate cold water storage tank is not required, therefore installation is simplified and costs reduced. 

Gledhill 1200 x 450 Indirect Combi Tank BICOM05

The combination cylinder is specifically designed to be installed into properties without a loft space ie apartments etc. With the feed tank being incorporated into the combination unit, a separate cold water storage tank is not required, therefore installation is simplified and costs reduced. 

Gledhill 900 x 400 Indirect 10M WH BIND15

Manufactured to BS1566 and 2010 Part L1B compliant, these cylinders have strong environmental credentials including; • industry leading 35mm HCFC free insulation • exceptionally low standing heat loss, in anticipation of EUP regulations • insulation incorporates Polyol which is derived from Rapeseed oil - a fully renewable resource, with an industry leading Global Warming Potential of 0.7 • with a copper internal cylinder, the product is fully recyclable at the end of its working life • manufactured at 9 locations in the UK, the cylinders have a lower carbon footprint derived from transportation than is typical in the industry

Gledhill 900 x 450 Indirect 10M WH BIND22

Manufactured to BS1566 and 2010 Part L1B compliant, these cylinders have strong environmental credentials including; • industry leading 35mm HCFC free insulation • exceptionally low standing heat loss, in anticipation of EUP regulations • insulation incorporates Polyol which is derived from Rapeseed oil - a fully renewable resource, with an industry leading Global Warming Potential of 0.7 • with a copper internal cylinder, the product is fully recyclable at the end of its working life • manufactured at 9 locations in the UK, the cylinders have a lower carbon footprint derived from transportation than is typical in the industry

Gledhill 1050 x 400 Indirect 10M WH BIND16

Manufactured to BS1566 and 2010 Part L1B compliant, these cylinders have strong environmental credentials including; • industry leading 35mm HCFC free insulation • exceptionally low standing heat loss, in anticipation of EUP regulations • insulation incorporates Polyol which is derived from Rapeseed oil - a fully renewable resource, with an industry leading Global Warming Potential of 0.7 • with a copper internal cylinder, the product is fully recyclable at the end of its working life • manufactured at 9 locations in the UK, the cylinders have a lower carbon footprint derived from transportation than is typical in the industry

Gledhill 1050 x 450 Indirect 10M WH BIND23

Manufactured to BS1566 and 2010 Part L1B compliant, these cylinders have strong environmental credentials including; • industry leading 35mm HCFC free insulation • exceptionally low standing heat loss, in anticipation of EUP regulations • insulation incorporates Polyol which is derived from Rapeseed oil - a fully renewable resource, with an industry leading Global Warming Potential of 0.7 • with a copper internal cylinder, the product is fully recyclable at the end of its working life • manufactured at 9 locations in the UK, the cylinders have a lower carbon footprint derived from transportation than is typical in the industry

Gledhill 1200 x 400 Indirect 10M WH BIND17

Manufactured to BS1566 and 2010 Part L1B compliant, these cylinders have strong environmental credentials including; • industry leading 35mm HCFC free insulation • exceptionally low standing heat loss, in anticipation of EUP regulations • insulation incorporates Polyol which is derived from Rapeseed oil - a fully renewable resource, with an industry leading Global Warming Potential of 0.7 • with a copper internal cylinder, the product is fully recyclable at the end of its working life • manufactured at 9 locations in the UK, the cylinders have a lower carbon footprint derived from transportation than is typical in the industry

Gledhill 1200 x 450 Indirect 10M WH BIND24

Manufactured to BS1566 and 2010 Part L1B compliant, these cylinders have strong environmental credentials including; • industry leading 35mm HCFC free insulation • exceptionally low standing heat loss, in anticipation of EUP regulations • insulation incorporates Polyol which is derived from Rapeseed oil - a fully renewable resource, with an industry leading Global Warming Potential of 0.7 • with a copper internal cylinder, the product is fully recyclable at the end of its working life • manufactured at 9 locations in the UK, the cylinders have a lower carbon footprint derived from transportation than is typical in the industry

Gledhill 1500 x 300 Indirect 10M WH BIND04

Manufactured to BS1566 and 2010 Part L1B compliant, these cylinders have strong environmental credentials including; • industry leading 35mm HCFC free insulation • exceptionally low standing heat loss, in anticipation of EUP regulations • insulation incorporates Polyol which is derived from Rapeseed oil - a fully renewable resource, with an industry leading Global Warming Potential of 0.7 • with a copper internal cylinder, the product is fully recyclable at the end of its working life • manufactured at 9 locations in the UK, the cylinders have a lower carbon footprint derived from transportation than is typical in the industry

Gledhill 1500 x 400 Indirect 10M WH BIND18

Manufactured to BS1566 and 2010 Part L1B compliant, these cylinders have strong environmental credentials including; • industry leading 35mm HCFC free insulation • exceptionally low standing heat loss, in anticipation of EUP regulations • insulation incorporates Polyol which is derived from Rapeseed oil - a fully renewable resource, with an industry leading Global Warming Potential of 0.7 • with a copper internal cylinder, the product is fully recyclable at the end of its working life • manufactured at 9 locations in the UK, the cylinders have a lower carbon footprint derived from transportation than is typical in the industry

Gledhill 1500 x 450 Indirect 10M WH BIND25

Manufactured to BS1566 and 2010 Part L1B compliant, these cylinders have strong environmental credentials including; • industry leading 35mm HCFC free insulation • exceptionally low standing heat loss, in anticipation of EUP regulations • insulation incorporates Polyol which is derived from Rapeseed oil - a fully renewable resource, with an industry leading Global Warming Potential of 0.7 • with a copper internal cylinder, the product is fully recyclable at the end of its working life • manufactured at 9 locations in the UK, the cylinders have a lower carbon footprint derived from transportation than is typical in the industry

Gledhill 900 x 450 Direct BEDC02

The Economy 7 range of domestic hot water cylinders have been designed to maximise the heating potential electric off-peak tariffs.

Gledhill 1050 x 450 Direct BEDC03

The Economy 7 range of domestic hot water cylinders have been designed to maximise the heating potential electric off-peak tariffs.

Gledhill 1200 x 450 Direct BEDC04

The Economy 7 range of domestic hot water cylinders have been designed to maximise the heating potential electric off-peak tariffs.

Gledhill 900 x 450 Indirect Combi Tank BICOM03

The combination cylinder is specifically designed to be installed into properties without a loft space ie apartments etc. With the feed tank being incorporated into the combination unit, a separate cold water storage tank is not required, therefore installation is simplified and costs reduced.