Gledhill SL Plus HP 400 4SQM EE PLUHP400

Due to the fact that many heat pumps will not raise the stored water temperature to 60 degrees celsius, which is necessary to prevent the growth of legionella, the StainlessLite Plus HP model is supplied with an immersion heater tapping and a thermostat pocket.

Gledhill SL Plus Indirect 400 EE Open Vented PLUIN400OV

The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water. The coil’s corrugated design gives much faster recovery times than can be achieved with plain tube coils. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note all indirect models come with an on-peak back-up immersion but only the 250, 300 and 400 litre models are supplied with an additional off-peak immersion.)

Gledhill SL Plus Indirect 150 EE Open Vented PLUIN150OV

The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water. The coil’s corrugated design gives much faster recovery times than can be achieved with plain tube coils. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note all indirect models come with an on-peak back-up immersion but only the 250, 300 and 400 litre models are supplied with an additional off-peak immersion.)

Gledhill SL Plus Indirect 180 EE Open Vented PLUIN180OV

The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water. The coil’s corrugated design gives much faster recovery times than can be achieved with plain tube coils. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note all indirect models come with an on-peak back-up immersion but only the 250, 300 and 400 litre models are supplied with an additional off-peak immersion.)

Gledhill SL Plus Indirect 210 EE Open Vented PLUIN210OV

The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water. The coil’s corrugated design gives much faster recovery times than can be achieved with plain tube coils. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note all indirect models come with an on-peak back-up immersion but only the 250, 300 and 400 litre models are supplied with an additional off-peak immersion.)

Gledhill SL Plus Indirect 250 EE Open Vented PLUIN250OV

The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water. The coil’s corrugated design gives much faster recovery times than can be achieved with plain tube coils. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note all indirect models come with an on-peak back-up immersion but only the 250, 300 and 400 litre models are supplied with an additional off-peak immersion.)

Gledhill SL Plus Indirect 90 EE Open Vented PLUIN090OV

The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water. The coil’s corrugated design gives much faster recovery times than can be achieved with plain tube coils. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note all indirect models come with an on-peak back-up immersion but only the 250, 300 and 400 litre models are supplied with an additional off-peak immersion.)

Gledhill SL Plus Indirect 120 EE Open Vented PLUIN120OV

The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water. The coil’s corrugated design gives much faster recovery times than can be achieved with plain tube coils. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note all indirect models come with an on-peak back-up immersion but only the 250, 300 and 400 litre models are supplied with an additional off-peak immersion.)