Regin Green Arrow On White Direction Tape 33M REGA49

The Regin Green Arrow On White Direction Tape 33M REGA49 is designed to clearly indicate flow direction on pipework and systems. Featuring a bold green arrow on a white background, it provides high visibility and easy identification in both domestic and commercial installations. Supplied on a 33 metre roll, this tape is ideal for marking heating, water and other pipe systems to improve safety, organisation and compliance on site.

Regin Ground Source Heat Pump Service & Maintenance Pad REGP49

The Regin Ground Source Heat Pump Service & Maintenance Pad REGP49 is a professional documentation pad designed for engineers carrying out installation and servicing of ground source heat pump systems. It provides a clear and structured record of work completed, supporting compliance and best practice within the heating industry. Supplied as a triplicate pad, it allows copies to be retained by the engineer, the customer and for official records. Ideal for both domestic and commercial installations, this pad helps ensure accurate service history and transparent certification of ground source heat pump work.

Regin Decommissioned Appliance Report Pad REGP59

The Regin Decommissioned Appliance Report Pad REGP59 is a professional reporting pad designed to document the safe decommissioning of boilers and other appliances that must not be used again. It provides clear written evidence that an appliance has been taken out of service, helping engineers meet compliance requirements and protect both customers and contractors. Supplied with 25 reports in triplicate, this pad allows copies to be retained by the engineer, the customer and for official records. It is ideal for use alongside Regin REGP36 and REGP26 warning stickers to clearly mark appliances as decommissioned.

Regin Replacement Mini Premier Gauge Filling Nozzle Grey (for REGU33 ONLY) REGU27

The Regin Replacement Mini Premier Gauge Filling Nozzle Grey (For REGU33 Only) REGU27 is a genuine replacement component designed exclusively for use with the Regin REGU33 Mini Premier Gauge. Featuring a distinctive grey top, this nozzle ensures accurate and reliable filling performance is maintained when the original nozzle becomes worn or damaged. Ideal for heating engineers and service professionals, it helps extend the working life of the REGU33 gauge while maintaining correct operation. Simple to fit and purpose made, it provides peace of mind that the gauge continues to perform as intended.

Regin Replacement Large Premier Gauge Filling Nozzle Grey (for REGU40 ONLY) REGU44

The Regin Replacement Large Premier Gauge Filling Nozzle Grey (For REGU40 Only) REGU44 is a genuine replacement component designed exclusively for the Regin REGU40 Premier 60 Gauge. The grey top nozzle ensures accurate and reliable filling performance is maintained when the original nozzle becomes worn or damaged. Ideal for heating engineers and service professionals, this replacement part allows the gauge to continue functioning correctly without the need for a full gauge replacement. Easy to fit and purpose made, it guarantees compatibility and durability for ongoing use in heating systems.

Regin Air Source Heat Pump Service & Maintenance Pad REGP48

The Regin Air Source Heat Pump Service & Maintenance Pad REGP48 is a purpose-designed documentation pad for engineers involved in the servicing and installation of air source heat pump systems. It provides clear, professional certification of both installation and ongoing maintenance work, helping ensure compliance and accurate record keeping. Supplied in a convenient triplicate format, this pad allows engineers to retain copies for themselves, the customer and official records. Ideal for use in domestic and commercial settings, it supports best practice by making service history easy to record, track and reference.

Raptor Thermometer RAP100 Single Input Thermometer

Raptor Thermometer RAP100 Single Input Thermometer is a compact, professional-grade temperature measuring device designed for use with K-type thermocouple probes. It delivers fast, accurate readings across a wide temperature range, making it suitable for HVAC, refrigeration, cold storage, and laboratory settings. Its backlit LCD screen ensures visibility in dim environments, and it comes in a durable protective case for easy storage and transport. Single Input K-Type Thermometer with Backlit Display for HVAC and Industrial Use.

BritTherm Сirculator Pump S6 Series S6 25/18-180 (661999607)

The BritTherm S6 25/18-180 Circulator Pump offers a high-capacity and efficient solution for potable water circulation. Designed with a 180mm length and a corrosion-resistant stainless steel EN1.4521 casing, it’s ideal for demanding domestic and commercial systems. The pump features 10 automatic operating modes including AUTO, constant pressure, and proportional pressure settings. Built-in PWM GT and ST functions allow integration with external controllers like Honeywell and Siemens, enabling remote operation and frequency control. Safety is enhanced through dedicated electrical and thermal protection, making this pump a reliable and smart choice. Built for performance and durability, the BritTherm Circulator Pump S6 25/18-180 is an advanced circulator pump specifically designed for potable water use. With a 180mm body and an EN1.4521 stainless steel casing, it ensures hygienic operation and long service life. The pump boasts a user-friendly control interface, offering three fixed speed settings and multiple automation options tailored to different system demands. The inclusion of AUTO mode simplifies operation by automatically adjusting the pump to suit current flow and pressure requirements. Users can also choose between two constant pressure modes (CP1 & CP2) and two proportional pressure modes (PP1 & PP2) for optimal system performance. The integration of PWM GT and ST allows the pump to be remotely controlled by third-party controllers, making it suitable for intelligent building management systems. Its built-in electrical and thermal protection prevents damage caused by external electrical faults or overheating.   Features & Benefits: ✅ EN1.4521 stainless steel body ideal for potable water systems ✅ 180mm body length suits larger installations ✅ AUTO mode optimises pump performance automatically ✅ Three fixed speed levels for manual control ✅ CP1 & CP2 constant pressure modes maintain flow stability ✅ PP1 & PP2 proportional pressure modes for energy efficiency ✅ Integrated PWM GT & ST for smart remote control ✅ Compatible with Honeywell, Siemens, and more ✅ Electrical & thermal safety systems built in ✅ Perfect for circulation and recirculation applications

BritTherm Replacement Pump Head H4 Series H4 25/8 (661996608)

The BritTherm H4 25/8 Replacement Pump Head is designed for modern combination gas boilers requiring clockwise rotor rotation. Featuring built-in PWM technology, this motor allows precise remote control of rotor speed via a low-voltage signal from the boiler’s electronic board. Compatible with a variety of controllers and thermostats such as Siemens and Honeywell, it is ideal for integration into smart homes, underfloor heating, solar thermal, and heat pump systems. Enhance your heating system with the BritTherm H4 25/8, a universal electric motor pump head designed for clockwise rotation in combination boilers. The motor’s integrated PWM processor facilitates remote speed control through the boiler’s electronic system, enabling smooth and efficient operation tailored to your home’s needs. This pump head supports 11 automatic work programmes, including three constant fixed speeds for traditional setups. Its Automatic Night Power Reduction Function lowers energy consumption to just 5 watts during low-demand periods, contributing significantly to energy savings without compromising heating performance. Robust electrical and thermal protection systems safeguard the pump against faults caused by external factors unrelated to its operation, ensuring reliability and long service life. This pump is perfect for heating engineers and homeowners aiming to upgrade or maintain efficient heating systems.   Features & Benefits: ✅ Clockwise rotor design for wide boiler compatibility ✅ Built-in PWM for seamless remote speed control ✅ Compatible with Siemens, Honeywell, and other thermostats ✅ Suitable for smart home, underfloor heating, solar, and heat pump systems ✅ 11 automatic operating programmes plus 3 fixed speed modes ✅ Automatic Night Power Reduction cuts energy use to 5 watts ✅ Electrical and thermal protection for enhanced durability ✅ Easy retrofit replacement for modern combination boilers ✅ Improves heating system efficiency and reduces running costs

BritTherm Сirculator Pump B1 Series B1 20/12-180 (661996708)

The BritTherm B1 20/12-180 Circulator Pump is a high-performance, three-speed circulation pump built with a durable bronze body for safe use with cold and hot drinking water. Designed for demanding applications, this model delivers strong flow capacity and flexibility with manually selected speed settings. With reliable thermal and electrical protection, it’s a time-tested solution for domestic and light commercial systems. Built to handle higher capacity circulation requirements, the BritTherm B1 20/12-180 Circulator Pump offers robust performance in potable water systems. Its bronze body construction provides excellent corrosion resistance, making it suitable for both hot and cold water circulation. The pump features a manual switch with three fixed speeds, enabling users to easily adjust flow settings across the full power range to match the system's demands. This “Old School” design is favoured for its reliability and simplicity in a wide range of installation types. To ensure safe and long-lasting operation, the pump is equipped with integrated electrical and thermal protection systems. These features safeguard against external faults and thermal overloads, preventing unexpected breakdowns and maintaining system reliability. This model’s 180mm length and powerful performance make it ideal for larger domestic systems, commercial premises, or multi-zoned heating and water circulation applications.   Features & Benefits: ✅ Three-speed manual operation for adaptable flow control ✅ High-capacity performance for larger systems ✅ Bronze body for safe use with drinking water ✅ Reliable and easy-to-service design ✅ Electrical and thermal safety protection built in ✅ Ideal for both domestic and commercial water systems

BritTherm Automatic Сirculator Pump P7 Series P7 32/8-180 (661995902)

The BritTherm P7 32/8-180 circulator pump is engineered for commercial heating applications, combining a permanent magnet motor with compact rotor technology for silent and energy-saving performance. Offering 13 automatic operation modes, including AUTO, constant pressure, proportional pressure, and fixed speed modes, it adapts easily to various system demands. With advanced electrical and thermal protections and a self-ventilated casing, this pump ensures reliability and long service life in underfloor heating and HVAC systems. Designed for commercial HVAC and underfloor heating systems, the BritTherm P7 32/8-180 is a high-performance circulator pump featuring 32mm ports and a 180mm length. It delivers up to 8 metres of head pressure, ideal for medium-demand installations requiring quiet and efficient operation. Equipped with a permanent magnet motor and compact rotor, the pump provides whisper-quiet operation while reducing power consumption. Its 13 selectable modes include AUTO mode for straightforward setup, four constant pressure modes (CP2 to CP5) for stable flow applications, four proportional pressure modes (PP2 to PP5) that adjust to varying flow rates, and four fixed rotor speed modes for traditional control. The automatic night power reduction feature drops energy use to just 5 watts during off-peak hours, maintaining heating quality while saving electricity. Its self-ventilated design prevents air ingress, improving operational reliability. Built-in electrical and thermal protection systems guard against external faults, minimising downtime and enhancing durability.   Features & Benefits: ✅ Permanent magnet motor for superior energy efficiency ✅ Whisper-quiet operation with compact rotor technology ✅ 13 flexible operation modes for varied heating systems ✅ Four constant pressure modes (CP2 to CP5) ✅ Four proportional pressure modes (PP2 to PP5) ✅ Four fixed rotor speed modes for consistent operation ✅ Automatic night power reduction to 5 watts ✅ Self-ventilated casing to prevent air ingress ✅ Electrical and thermal protection for enhanced safety ✅ Ideal for commercial HVAC and underfloor heating

Regin Appliance Settings Caution Stickers (Pack Of 8) REGP22

Regin Appliance Settings Caution Stickers (Pack of 8) are designed to alert users and service personnel to avoid altering system settings. Featuring a strong adhesive for secure application, these cautionary stickers help maintain system integrity by discouraging unwanted changes. Ideal for boilers, heating systems, and other appliances requiring fixed configurations.

Regin Oil Fired Vaporising Appliance Service & Commissioning Pad REGPO12

The Regin Oil Fired Vaporising Appliance Service & Commissioning Pad (REGPO12) is a unique and essential tool for professional engineers servicing and commissioning oil and bio-liquid (HVO) fired vaporising appliances. With 25 reports in triplicate, it provides formal documentation of maintenance activities, risk identification, and compliance with BS 5410 Part 1 2019. Pre-printed terms and conditions ensure clarity for both engineers and customers.

Regin Liquid Fuel Common Fault Report Pad REGPO15

The Regin Liquid Fuel Common Fault Report Pad (REGPO15) simplifies documenting faults during the servicing and commissioning of liquid fuel systems, including oil-fired appliances. With a time-saving tick-box format, it allows engineers to quickly record potential and immediate risks. Comprising 25 triplicate reports, it includes pre-printed terms and conditions, ensuring compliance with BS 5410 Parts 1 & 2 and offering valuable litigation protection.

MacDonald Plumbing Supplies Brass Air Vent Cap 15mm

The Brass Air Vent Cap 15mm is a durable and efficient solution for releasing trapped air from plumbing and heating systems. Made from high-quality brass, it ensures long-lasting performance while preventing air blockages that can reduce system efficiency. Easy to install and compact in design, this air vent cap is ideal for maintaining consistent pressure and ensuring smooth system operation.

Trappex ¾ Scalematic Commercial Scale Reducer

The Trappex ¾" Scalematic Commercial Scale Reducer is a highly effective solution for reducing limescale build-up in plumbing and heating systems. Using advanced catalytic treatment technology, it provides maintenance-free protection without chemicals or traditional water softening systems. WRAS approved and manufactured with durable copper housing, it is ideal for both commercial and domestic applications.

Danfoss Motorised Valve HP22B Paddle Type 2 Port 22mm DF087N660900

The Danfoss Motorised Valve HP22B Paddle Type 2 Port 22mm DF087N660900 is a high-performance valve designed for precise flow control in domestic and commercial heating systems. Featuring a paddle type mechanism for reliable shut-off and a robust construction, it ensures efficient operation and long service life. With a high flow rate and compatibility with a range of actuators, it offers flexibility for various heating applications.

Trappex Expansion Vessel Service Valve ¾

Ensure efficient maintenance of your heating system with the Trappex Expansion Vessel Service Valve. This valve offers convenient access for draining, repressurising, and adding chemical inhibitor to your expansion vessel. With its integrated filling loop assembly and isolation capability, it simplifies maintenance tasks while minimising downtime.

Rob Pond Expansion Vessel Service Valve

The Rob Pond Expansion Vessel Service Valve - EVSRV provides an easy solution for service and maintenance of expansion vessels.

Hotun SF Range Black 15 - 22 Dry Trap Tundish HBSF15-22

The revolutionary, market-leading, plumber-designed Hotun dry trap tundish allows a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Allowing both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline which makes it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. This means that diagnoses of any faults is quick and simple. Hotun fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge

Hotun SF Range White 15 - 22 Dry Trap Tundish HWSF15-22

The revolutionary, market-leading, plumber-designed Hotun dry trap tundish allows a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Allowing both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline which makes it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. This means that diagnoses of any faults is quick and simple. Hotun fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge

Hotun SF Range Hiflo Black 15 - 32 Dry Trap Tundish HHBSF15-32

From the manufacturer that brought you the revolutionary, market-leading, plumber-designed Hotun dry trap tundish, here is our latest innovation, the Hotun Hiflo sf push-fit dry trap tundish. Allowing a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Taking both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline making it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers and now, with its push-fit inlet connection, can be fitted in seconds. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. Making diagnoses of any faults quick and simple. Hotun Hiflo sf is WRAS approved and fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge.

Hotun SF Range Hiflo White 15 - 32 Dry Trap Tundish HHWSF15-32

From the manufacturer that brought you the revolutionary, market-leading, plumber-designed Hotun dry trap tundish, here is our latest innovation, the Hotun Hiflo sf push-fit dry trap tundish. Allowing a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Taking both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline making it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers and now, with its push-fit inlet connection, can be fitted in seconds. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. Making diagnoses of any faults quick and simple. Hotun Hiflo sf is WRAS approved and fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge.

Hotun SF Range XL 22 - 32 Dry Trap Tundish HXLSF22-32

From the manufacturer that brought you the revolutionary, market-leading, plumber-designed Hotun dry trap tundish, here is our latest innovation, the Hotun xl sf push-fit dry trap tundish. Allowing a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Taking both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline making it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers and now, with its push-fit inlet connection, can be fitted in seconds. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. Making diagnoses of any faults quick and simple. Hotun xl sf is WRAS approved and fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge.

Hotun White 15 - 22 Dry Trap Tundish HW100C15-22

The revolutionary, market-leading, plumber-designed hotun dry trap tundish allows a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Allowing both trickle and full flow but preventing foul odours and gases from coming back into a property, hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline which makes it ideal for use in hard water areas. Award-winning and cost effective, Hotun  is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. This means that diagnoses of any faults is quick and simple. Hotun is WRAS approved and fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge.

Hotun Hiflo Black 15 - 32 Dry Trap Tundish HHB100C15-32

The revolutionary, market-leading, plumber-designed Hotun dry trap tundish allows a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Allowing both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline which makes it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. This means that diagnoses of any faults is quick and simple. Hotun fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge

Hotun Hiflo White 15 - 32 Dry Trap Tundish HHW100C15-32

The revolutionary, market-leading, plumber-designed Hotun dry trap tundish allows a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Allowing both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline which makes it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. This means that diagnoses of any faults is quick and simple. Hotun fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge

Hotun Black 15 - 22 Dry Trap Tundish HB100C15-22

The revolutionary, market-leading, plumber-designed hotun dry trap tundish allows a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Allowing both trickle and full flow but preventing foul odours and gases from coming back into a property, hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline which makes it ideal for use in hard water areas. Award-winning and cost effective, Hotun  is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. This means that diagnoses of any faults is quick and simple. Hotun is WRAS approved and fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge.

Regin Non-Dom Oil-Fired Appliance Service & Insp. Pad REGPO21

REGPO21 - NON-DOM OIL-FIRED APPLIANCE SERVICE & INSP. PAD    PO21 FAQ Q;        Which pad should I have to record the servicing of a commercial two stage oil burner? A;         REGIN form PO21   Q;        Why does the new REGIN PO21 pad say “Liquid Fuel Supply system inspected at appliance”? A;         When servicing a commercial liquid fuel burner, the upstream fuel storage and supply system (external to the plant room) inspection and maintenance may well be the responsibility of other persons. The responsibilities of non-domestic engineers have been clarified in the new British Standard BS 5410 Part 2.

Regin Commercial Catering Appliance Gas Safety Inspection Report Pad REGP57

The Regin Commercial Catering Appliance Gas Safety Inspection Report Pad REGP57 is designed for recording gas safety inspections on commercial catering equipment. Supplied as a pad of 25 duplicate (2-part) reports, it allows engineers to provide a clear record for both themselves and their customers. Ideal for use in restaurants, commercial kitchens and catering environments, this pad ensures professional documentation of safety checks and compliance work.

Regin DO NOT OPERATE Tags (Pack of 8) REGP94

The Regin DO NOT OPERATE Tags (Pack of 8) REGP94 are designed to provide a clear and reliable visual warning when isolating electrical circuits. Each pack contains eight tags with cable ties, clearly marked “DO NOT OPERATE,” making them ideal for locking out fuse spurs or other electrical appliances. These tags help prevent accidental operation, ensuring safety during maintenance and servicing. They are compatible with the Regin safe isolation kit (REGXS600), supporting professional lockout procedures and compliance with safety regulations.

Regin Service Reminder (Liquid Fuel) Sticker/Tag X8 REGPL04

REGPL04 Oil Appliance Serviced Sticker  

Regin Domestic Central Heating & Hot Water System Inspection Report Pad REGPO10

REGPO10 - Domestic Central Heating & Hot Water System Inspection/Commissioning Report Pad  

Regin Leak Shot 100ml - REGL15

Our new sized bottle of leak in a perfect 100ml size.  

Regin Inspection Mirror REGT35

The Regin Inspection Mirror REGT35 is a compact and versatile inspection tool designed to help tradespeople view areas that are difficult to see directly. Featuring a 30mm diameter mirror and an all angle ball joint, the mirror can be positioned to provide a clear view from different angles. The telescopic design extends to approximately 60cm, providing additional reach when inspecting confined or awkward areas. A convenient pocket clip is also included for easy carrying.

Regin Inspection Hatch 350x350mm REGH350

Regin’s range of hinged plastic inspection hatches provide a simple, low cost, high quality solution for access to building services in walls and ceilings. The plastic access panels are produced from refined high impact plastic, injection moulded into a slim profile frame, with smooth rounded corners. This provides a lightweight solution, enabling easy and rapid installation into all types of wall or ceiling construction.

Regin Inspection Hatch 450x450mm REGH450

Regin’s range of hinged plastic inspection hatches provide a simple, low cost, high quality solution for access to building services in walls and ceilings. The plastic access panels are produced from refined high impact plastic, injection moulded into a slim profile frame, with smooth rounded corners. This provides a lightweight solution, enabling easy and rapid installation into all types of wall or ceiling construction.

Regin Inspection Hatch 100x150mm REGH150

Regin’s range of hinged plastic inspection hatches provide a simple, low cost, high quality solution for access to building services in walls and ceilings. The plastic access panels are produced from refined high impact plastic, injection moulded into a slim profile frame, with smooth rounded corners. This provides a lightweight solution, enabling easy and rapid installation into all types of wall or ceiling construction.

Regin Inspection Hatch 150x150mm REGH150L

Regin’s range of hinged plastic inspection hatches provide a simple, low cost, high quality solution for access to building services in walls and ceilings. The plastic access panels are produced from refined high impact plastic, injection moulded into a slim profile frame, with smooth rounded corners. This provides a lightweight solution, enabling easy and rapid installation into all types of wall or ceiling construction.

Regin Inspection Hatch 200x200mm REGH200

Regin’s range of hinged plastic inspection hatches provide a simple, low cost, high quality solution for access to building services in walls and ceilings. The plastic access panels are produced from refined high impact plastic, injection moulded into a slim profile frame, with smooth rounded corners. This provides a lightweight solution, enabling easy and rapid installation into all types of wall or ceiling construction.

Regin Inspection Hatch 150x230mm REGH230

Regin’s range of hinged plastic inspection hatches provide a simple, low cost, high quality solution for access to building services in walls and ceilings. The plastic access panels are produced from refined high impact plastic, injection moulded into a slim profile frame, with smooth rounded corners. This provides a lightweight solution, enabling easy and rapid installation into all types of wall or ceiling construction.

Regin Inspection Hatch 300x300mm REGH300

Regin’s range of hinged plastic inspection hatches provide a simple, low cost, high quality solution for access to building services in walls and ceilings. The plastic access panels are produced from refined high impact plastic, injection moulded into a slim profile frame, with smooth rounded corners. This provides a lightweight solution, enabling easy and rapid installation into all types of wall or ceiling construction.

MacDonald Plumbing Supplies Denso Protective Tape 50mm x 10Mtr

The Denso Protective Tape 50mm x 10Mtr is a highly durable self-adhesive tape designed to provide long-lasting waterproofing and corrosion protection for pipes, fittings, valves, and metal surfaces. Measuring 50mm wide and supplied on a 10-metre roll, it creates a reliable watertight and airtight barrier that helps extend the life of plumbing and industrial installations. Its flexible construction allows it to conform easily to irregular shapes, making it ideal for maintenance, repairs, and new installations.

Tesla (UK) Tesla 18" Copper Immersion Heater Including Stat TIH515

Immersion heater with resettable dual safety thermostat, sealing washer and leaflet 2 1/4 inch boss Copper construction Not suitable for stainless steel cylinders For soft water areas only

Tesla (UK) Tesla 23" Copper Immersion Heater Including Stat TIH520

Immersion heater with resettable dual safety thermostat, sealing washer and leaflet 2 1/4 inch boss Copper construction Not suitable for stainless steel cylinders For soft water areas only

Tesla (UK) Tesla 27" Copper Immersion Heater Including Stat TIH525

Immersion heater with resettable dual safety thermostat, sealing washer and leaflet 2 1/4 inch boss Copper construction Not suitable for stainless steel cylinders For soft water areas only

Tesla (UK) Tesla 30" Copper Immersion Heater Including Stat TIH530

Immersion heater with resettable dual safety thermostat, sealing washer and leaflet 2 1/4 inch boss Copper construction Not suitable for stainless steel cylinders For soft water areas only

Tesla (UK) Tesla 36" Copper Immersion Heater Including Stat TIH535

Immersion heater with resettable dual safety thermostat, sealing washer and leaflet 2 1/4 inch boss Copper construction Not suitable for stainless steel cylinders For soft water areas only

Tesla (UK) Tesla 11" Incoloy immersion heater & stat copper pocket TIH540

Immersion heater with resettable dual safety thermostat, sealing washer and leaflet 2 1/4 inch boss Incoloy-copper construction Suitable for stainless steel cylinders For medium and hard water areas

Tesla (UK) Tesla 14" Incoloy immersion heater & stat copper pocket TIH545

Immersion heater with resettable dual safety thermostat, sealing washer and leaflet 2 1/4 inch boss Incoloy-copper construction Suitable for stainless steel cylinders For medium and hard water areas

Tesla (UK) Tesla 18" Incoloy immersion heater & stat copper pocket TIH547

Immersion heater with resettable dual safety thermostat, sealing washer and leaflet 2 1/4 inch boss Incoloy-copper construction Suitable for stainless steel cylinders For medium and hard water areas

Tesla (UK) Tesla 27" Incoloy immersion heater & stat copper pocket TIH550

Immersion heater with resettable dual safety thermostat, sealing washer and leaflet 2 1/4 inch boss Incoloy-copper construction Suitable for stainless steel cylinders For medium and hard water areas

Tesla (UK) Tesla 14" Copper Immersion Heater Including Stat TIH510

Immersion heater with resettable dual safety thermostat, sealing washer and leaflet 2 1/4 inch boss Copper construction Not suitable for stainless steel cylinders For soft water areas only

Tesla (UK) Tesla 11" Copper Immersion Heater Including Stat TIH505

Immersion heater with resettable dual safety thermostat, sealing washer and leaflet 2 1/4 inch boss Copper construction Not suitable for stainless steel cylinders For soft water areas only

Regin AC Voltage Detector with Torch REGXE09

The Regin AC Voltage Detector with Torch REGXE09 is a compact and practical electrical testing tool designed to detect AC voltage without making direct contact with the conductor. Suitable for detecting voltages from 100VAC to 600VAC on 50/60Hz circuits, it provides a clear red visual indication when voltage is detected. A built-in bright flashlight also improves visibility when working in dark or poorly lit areas, making it a useful addition to any professional toolkit.

Regin Domestic Oil Storage/Spillage/Fire Risk Record Pad (25 in triplicate) REGPO13

REGPO13 - Domestic Oil Storage/Spillage/Fire Risk Record Pad   Specific FAQ's (PO13) Q;        Which pad should I use to record the inspection of a domestic oil storage tank and supply line? A;         REGIN form PO13   Q;        I’m installing a replacement domestic oil storage tank; which form should I use to record its installation? A;         To demonstrate a compliant liquid fuel storage tank installation the tank manufacturer’s sign off form (as supplied with the tank) should be completed and REGIN form PO13 should also be completed as it is now necessary to inspect and test the existing oil supply line before connecting it to the new tank.

Regin Oil Appliance Servicing & Commissioning Safety Record Pad (25 in triplicate) REGPO11

REGPO11 - Oil Appliance Servicing & Commissioning Safety Record Pad   Specific FAQ's (PO11) Q;        Which pad should I use to record a service visit to a domestic oil fired boiler? A;         REGIN form PO11 for the boiler and PO13 for the oil storage and supply system.   Q;        Which pad should I use to record the commissioning of a new oil fired boiler? A;         REGIN form PO11 for the boiler and PO13 for the oil storage and supply system.

Regin Analyser Readings Record Pad (50 in duplicate) REGP80

REGP80 - Analyser Readings Record Pad  

Regin Maintenance Checklist Pad (50 in duplicate) REGP65

REGP65 - Maintenance Check List Pad  

Regin Gas Appliance Serviced Sticker (8 pack) REGP10

REGP10 - Gas Appliance Serviced Sticker  

Regin Gas Appliance Serviced Tag (8 pack) REGP05

REGP05 - Gas Appliance Serviced Tag  

Regin Installer Service Kit REGM70

REGM70 - Installer’s Service Kit  

Regin Engineers Olive/Washer Kit REGK25

REGK25 - Engineers Olive/Washer Kit   12 commonly used olives and washers needed for everyday service work.

Regin Plumbers Mechanical Kit REGK20

REGK20 - Plumbers Mechanical Kit 12 commonly used screws and fixings needed for everyday service work.  

Regin Engineers Fuse Kit REGK17

REGK17 - Engineers Fuse Kit   12 commonly used fuses needed for everyday service work.

Regin Plumbers Electrical Kit REGK15

REGK15 - Plumbers Electrical Kit 12 commonly used fuses and electrical components needed for everyday service work.

Regin Boiler First Aid Kit REGK05

28 commonly used fixings for a wide range of major boiler manufacturer’s appliances with a further 4 Regin products needed for everyday service work. Supplied in a high quality Regin/Raaco assorted case.

Regin Fire Rated Inspection Hatch 300x300mm REGH300FR

Regin’s range of hinged plastic inspection hatches provide a simple, low cost, high quality solution for access to building services in walls and ceilings. The plastic access panels are produced from refined high impact plastic, injection moulded into a slim profile frame, with smooth rounded corners. This provides a lightweight solution, enabling easy and rapid installation into all types of wall or ceiling construction.