MacDonald Plumbing Supplies MacPress 15mm Isolation Valve FULL BORE

The MacPress 15mm Full Bore Isolation Valve is a WRAS Approved press-fit solution designed to deliver maximum flow efficiency. Featuring M Profile technology and a full bore design, it ensures minimal pressure loss and reliable performance in both residential and commercial plumbing systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 22mm Isolation Valve FULL BORE

The MacPress 22mm Full Bore Isolation Valve is a WRAS Approved press-fit solution designed to deliver maximum flow efficiency. Featuring M Profile technology and a full bore design, it ensures minimal pressure loss and reliable performance in both residential and commercial plumbing systems. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress 15mm Angled Service Valve

The MacPress 15mm Angled Service Valve features WRAS approval and M Profile press-fit connections, providing a quick, secure, and leak-proof solution for isolating water supplies in tight spaces. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.