MacDonald Plumbing Supplies MacPress Female Elbow 15mm x ½ - WATER

The MacPress Female Elbow 15mm x ½" is a WRAS approved copper press fitting designed for use in heating, hot water, and potable water systems. With a secure M-profile connection, it's the ideal choice for fast, leak-free installations in professional plumbing setups. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Elbow 22mm x ¾ - WATER

The MacPress Female Elbow 22mm x ¾" is a high-quality copper press fitting designed for use in hot water, heating, and potable water installations. With WRAS approval and M-profile design, it ensures leak-free, efficient, and professional-grade performance. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Elbow 28mm x 1" - WATER

  The MacPress Female Elbow 28mm x 1" is a professional-grade copper press fitting designed for potable water, heating, and hot water systems. Featuring a WRAS-approved M-profile and robust construction, it provides a reliable and permanent leak-free connection. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.