MacDonald Plumbing Supplies MacPress Male Union Connector 15mm x ½ - WATER

The MacPress Male Union Connector 15mm x ½" BSP is a WRAS approved, high-performance press fitting designed for use in potable water, heating, and hot water systems. This connector provides a secure, leak-free connection for professional plumbing applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Union Connector 22mm x ¾ - WATER

The MacPress Male Union Connector 22mm x ¾" BSP is a WRAS approved, high-performance press fitting designed for use in potable water, heating, and hot water systems. This connector provides a secure, leak-free connection for professional plumbing applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Union Connector 28mm x 1" - WATER

The MacPress Male Union Connector 28mm x 1" BSP is a WRAS approved press fitting ideal for use in potable water, heating, and hot water systems. Providing a secure, leak-free connection, it is a preferred choice for professional plumbing applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.