McAlpine BLKIT-1 Blanking Off Kit for Domestic Appliances

The McAlpine BLKIT-1 Blanking Off Kit for Domestic Appliances is a practical solution for sealing unused appliance waste connections safely and securely. Designed for compatibility with McAlpine fittings, this kit contains the components required to blank off ¾", 1", and 1½" fittings, helping prevent leaks, odours, and debris ingress while maintaining a clean and professional plumbing installation.

McAlpine ST90W/BODY-L Long Waste For 90mm Shower Traps

For use with ST90CP10, ST90CB10 and ST90WH10 Traps

McAlpine NUT-WMVALVE Female Blank Cap ¾

Blanks off appliance valves with ¾” thread.

McAlpine MACVALVE-4 Self Closing Waste Valve Compression X Compression 2"

Can be fitted in the horizontal or vertical position The Internal Membrane opens under water pressure to allow the discharge to flow freely and then closes to form a seal to prevent foul odour or sewer gas entering the building. 2″ x 2″ Universal Compression Connections

McAlpine SA10 Tubular Swivel 'p' Trap 1¼

75mm Water Seal Multifit Compression Outlet suits all plastic, copper and lead pipes

McAlpine ST90CP10 90mm Shower Trap Chrome Plated Plastic

Suitable for shower trays with a 90mm waste hole 50mm Water Seal 1½” BSP Thread Supplied with 135° Bend – BSP coupling nut x 1½” Universal

McAlpine WV-1 Space Saver With Self-closing Waste Valve 1½ X 1½

Bath Space-saver. 1½” BSP female inlet nut x 1½” universal compression outlet.

McAlpine WHB-1 Space Saver With Self-Closing Waste Valve 1¼ X 1¼

Wash Hand Basin Space-saver. 1¼” BSP female inlet nut x 1¼” universal compression outlet

McAlpine T31U Straight Connector BSP Male X Universal 1½

BSP Male x Universal Connection. 1½"

McAlpine T4U 90 Degree Bend Female Inlet Nut X BSP Male Connector 1½

Multifit compression fitting suits all plastic waste pipes to BS EN 1451-1:200 and BS EN 1329-1:2000, copper and lead pipe.

McAlpine MACVALVE-2 Self Closing Waste Valve Loose Nut X Compression 1½

BSP female inlet nut x universal compression outlet Membrane opens under water pressure to allow discharge to flow freely and then closes to form a seal to prevent foul odour or sewer gas entering the building Can be fitted in horizontal or vertical position Can be fitted in installation where a non-return valve can be of benefit to the plumbing installation

McAlpine S31U Straight Connector BSP Male X Universal 1¼

BSP Male x Universal Connection. 1¼"

McAlpine S4U 90 Degree Bend Female Inlet Nut X BSP Male Connector 1¼

Multifit compression fitting suits all plastic waste pipes to BS EN 1451-1:200 and BS EN 1329-1:2000, copper and lead pipe.  

McAlpine MACVALVE-3 Self Closing Waste Valve With Tundish Adaptor 1¼

1¼” outlet BSP female inlet nut x universal compression outlet Supplied with Tundish Adaptor – 1¼” BSP male thread x 22mm Universal inlet Can be used to take the discharge from a pressure relief valve on an unvented domestic hot water storage system. Please refer to guidance notes in approved Document G3 of the Building Regulations.

McAlpine MACVALVE-1 Self Closing Waste Valve Loose Nut X Compression 1¼

BSP female inlet nut x universal compression outlet Membrane opens under water pressure to allow discharge to flow freely and then closes to form a seal to prevent foul odour or sewer gas entering the building Can be fitted in horizontal or vertical position Can be fitted in installation where a non-return valve can be of benefit to the plumbing installation

McAlpine Q10 19mm Seal Bath Trap 1½

9mm Water Seal Multifit Compression Outlet suits all plastic, copper and lead pipes

McAlpine WM2 Sink Trap With Horizontal Domestic Appliance Nozzle 1½

75mm Water Seal 1½” Multifit Compression Outlet suits all plastic, copper and lead pipes Can accept discharge from a washing or dishwashing machine

McAlpine SC10 Tubular Swivel 'p' Trap 1½

75mm Water Seal Multifit Compression Outlet suits all plastic, copper and lead pipes

McAlpine ASA10 Adjustable Inlet Tubular Swivel 'p' Trap 1¼

The McAlpine ASA10 Adjustable Inlet Tubular Swivel ‘P’ Trap 1¼" is a versatile and easy-to-install waste trap designed to prevent unpleasant sink odours. Featuring a 75mm water seal and adjustable inlet, it is ideal for a wide range of domestic plumbing applications. With a Multifit outlet compatible with plastic, copper, and lead pipes, it provides a reliable and flexible installation solution.