MacDonald Plumbing Supplies MacTap Push Down Clicker Basin Waste Slotted Chrome

The MacTap Push Down Clicker Basin Waste Slotted Chrome is a practical basin waste designed for use with slotted basins. Its push down clicker mechanism provides straightforward operation, allowing the waste to be opened and closed by pressing the top of the waste. The chrome finish provides a clean appearance that complements a range of bathroom fittings. A brass backnut provides a robust fixing component for installation. Suitable for plumbers, bathroom installers and DIY customers, this basin waste is a useful option for new installations, bathroom refurbishments and replacing an existing basin waste.

Todays Tools PlumbThumb PTHUMB

The Todays Tools Plumb Thumb PTHUMB is a practical pipe isolation tool designed to simplify plumbing maintenance without the need to drain the entire system. Featuring a convenient double-ended design, it allows plumbers to temporarily isolate pipework quickly and cleanly, reducing downtime and mess. Manufactured from durable materials for repeated professional use, the Plumb Thumb is an essential addition to any plumber's toolkit.

McAlpine BLKIT-1 Blanking Off Kit for Domestic Appliances

The McAlpine BLKIT-1 Blanking Off Kit for Domestic Appliances is a practical solution for sealing unused appliance waste connections safely and securely. Designed for compatibility with McAlpine fittings, this kit contains the components required to blank off ¾", 1", and 1½" fittings, helping prevent leaks, odours, and debris ingress while maintaining a clean and professional plumbing installation.

MacDonald Plumbing Supplies Brass ¾ Cap

The Brass 3/4" Cap is a reliable fitting designed to seal off pipe ends in plumbing and heating systems. Manufactured from durable brass, it provides a secure and leak-free connection using a simple compression fitting. Ideal for both temporary and permanent applications, it ensures dependable performance in a wide range of installations.

MacDonald Plumbing Supplies MacValve WRAS Remote Filling Loop Part L Compliant with Gauge

The MacValve WRAS Remote Filling Loop Part L Compliant with Gauge is a practical and compliant solution for filling and pressurising central heating systems and heat interface units. Designed for flexible installation, it can be fitted remotely from the boiler or cylinder, making it ideal where access is limited or no integral pressure gauge is present. Supplied complete with a gauge and essential safety components, it ensures accurate pressure monitoring and safe system operation.

Rob Pond PressFit 22mm Perfect Pump Valve Pair

The Rob Pond PressFit 22mm Perfect Pump Valve Pair PPV22-PF provides a reliable and efficient solution for connecting circulating pumps in heating systems. Designed with 22mm M profile press connections and 1½" swivel unions, these valves allow quick installation and secure pump isolation. Manufactured from durable nickel plated brass and rated to 16 bar, they offer excellent strength and long-term reliability. Supplied as a matched pair with rubber washers, they ensure a tight seal and simplify installation for professional heating engineers.

Todays Tools XL Folding Bucket 20ltr with Hozelock Drain Off FBXL

The Todays Tools XL Folding Bucket 20ltr with Hozelock Drain Off FBXL is a practical, heavy duty solution designed specifically for plumbing and general trade applications. Developed following the success of the original Pit Bull Folding Bucket, this XL version offers an increased 20 litre capacity, making it ideal for larger tasks on site. Its robust construction ensures durability in demanding environments, while the folding design allows it to collapse flat for easy storage in vans or toolboxes. Featuring a quick hose connection and integrated shut off valve, this bucket provides excellent control when draining water, helping to reduce mess and improve efficiency during everyday plumbing jobs.

MacDonald Plumbing Supplies MacValve Bottom Fill Valve ½ Brass Tail

The MacValve Bottom Fill Valve ½ Brass Tail is a reliable and efficient solution for modern toilet cistern installations. Designed for consistent performance, it delivers smooth and quiet water refilling, making it ideal for both domestic and commercial environments. The robust ½ brass connection ensures long lasting durability, while the bottom entry design offers a neat and discreet installation that suits a wide range of cistern types. With a quick water stop function and precise water control, this valve helps maintain efficient flushing performance and reduces unnecessary water wastage. Its WRAS approval confirms full compliance with UK water regulations, giving installers complete confidence in its quality and reliability.

MacDonald Plumbing Supplies MacValve Side Fill Valve ½ Brass Tail

The MacValve Side Fill Valve ½ Brass Tail is a reliable, high-performance side entry valve designed to deliver smooth, quiet and efficient water filling in cisterns. Built with a durable ½ inch brass connection, it ensures long-lasting strength and compatibility across a wide range of installations. This valve is easy to fit, quick to adjust and engineered for dependable shut-off, helping prevent overfilling while maintaining consistent water flow. With its WRAS approval, the MacValve Side Fill Valve offers trusted compliance and reassurance for both domestic and commercial plumbing systems.

Todays Tools Pit Bull Folding Knife & Scraper Knife PBSK

The Todays Tools Pit Bull Folding Knife & Scraper Knife PBSK is a versatile and practical tool designed for professionals and DIY users alike. Combining the functionality of a folding knife with a scraper, it provides excellent convenience in one compact design. Supplied complete with 2 spare blades, this tool ensures you always have a sharp edge ready for cutting, trimming, or scraping tasks. Built for durability and ease of use, the Pit Bull PBSK is an essential addition to any tradesperson’s or handyman’s kit.

MacDonald Plumbing Supplies Thermostatic Mixing Valve 22mm WRAS Approved TMV22

The Thermostatic Mixing Valve 22mm WRAS Approved TMV22 is designed to ensure safe and reliable water temperature regulation in both domestic and commercial plumbing systems. This high-performance valve blends hot and cold water to deliver a consistent, pre-set temperature, preventing the risk of scalding. Fully WRAS approved and compliant with TMV2 standards, the TMV22 is perfect for larger systems, including communal bathrooms, healthcare facilities, and care homes. It features 22mm compression ends, internal check valves, and strainers for maximum safety and performance.

MacDonald Plumbing Supplies Thermostatic Mixing Valve 15mm WRAS Approved TMV15

The Thermostatic Mixing Valve 15mm WRAS Approved TMV15 is an essential safety component for domestic and commercial plumbing systems, regulating water temperature to prevent scalding. Ideal for basins, baths, and showers, this TMV15 valve blends hot and cold water to a controlled output temperature. WRAS approved and thermostatically controlled, it delivers reliable performance and is fully compliant with TMV2 standards for healthcare and residential use. Simple to install and maintain, it enhances user safety and efficiency in water systems.

McAlpine SK2A-BL Black Double Bowl Sink Kit 1½” x 75mm

The McAlpine SK2A-BL Black Double Bowl Sink Kit 1½” x 75mm is a high-quality, versatile waste kit designed for double bowl sinks. Supplied with a 75mm water seal swivel ‘P’ trap and two nozzles for appliance discharge, it is compatible with most British and European sink designs. This kit is manufactured from durable black polypropylene and includes blanking plugs for unused connections. The 1½” Multifit compression outlet suits plastic, copper, and lead pipes, ensuring a secure, leak-free fit. Fully compliant with BS EN 274-1:2002 standards.

Trappex Centramag Genesis 28mm Heat Pump Filter

The Trappex Genesis 28mm Heat Pump Filter is a high-performance magnetic filter designed specifically for air source heat pump systems. Built with a robust brass body, it effectively removes both magnetic and non-magnetic debris, protecting your system and maximising efficiency.

MacDonald Plumbing Supplies MacValve 15mm x ⅜ Chrome Plated Brass Straight Flat Face Iso Valve

The MacValve 15mm x ⅜" Chrome Plated Brass Straight Flat Face Iso Valve is a compact and reliable valve designed for isolating water supply to taps and appliances with ⅜" connections. Featuring a 15mm compression inlet and a ⅜" BSP flat face outlet, it provides a secure and leak-resistant connection. Its straight design is ideal for neat, direct installations where space is limited.

MacDonald Plumbing Supplies MacValve 15mm x ½ Chrome Plated Brass Straight Flat Face Iso Valve

The MacValve 15mm x ½" Chrome Plated Brass Straight Flat Face Iso Valve is a durable and reliable solution for isolating water supply to taps and appliances. Featuring a 15mm compression inlet and a ½" BSP flat face outlet, it provides a clean and secure connection. Its straight design is ideal for installations where a direct pipe run is required.

MacDonald Plumbing Supplies MacValve 15mm x ½ Chrome Plated Brass Angled Flat Face Iso Valve

The MacValve 15mm x ½" Chrome Plated Brass Angled Flat Face Iso Valve is a high-quality isolation valve designed for controlling water flow to taps, appliances, and sanitary fittings. Featuring a 15mm compression inlet and a ½" BSP flat face outlet, it provides a secure and reliable connection. Its angled design makes it ideal for installations in tight or confined spaces.

MacDonald Plumbing Supplies MacValve Water Drain Valve with Hose Tail ½" BSP

The MacValve Water Drain Valve is a durable and reliable solution for draining water from boilers and manifolds. Featuring a ½" BSP hose tail connection, a secure lever valve, and a closing cap with ring nut, this valve ensures efficient water drainage while preventing leaks.

Trappex 28mm Genesis Brass Filter Without Valves

The Trappex 28mm Genesis Brass Filter Without Valves is a compact, high-quality in-line system filter that offers easy installation and quick cleaning. Manufactured with a robust brass body and triple radial EPDM seals, it is designed to capture both magnetic and non-magnetic particles, ensuring optimal system efficiency. This filter can be fitted horizontally or vertically, making it ideal for small or restricted access areas.

Trappex 28mm Genesis Brass Filter With Valves

The Trappex 28mm Genesis Brass Filter with Valves offers superior filtration for heating systems, capturing both magnetic and non-magnetic particles. Built with a robust brass body, this filter ensures optimal system efficiency and longevity, complete with a 25-year warranty for peace of mind.

MacDonald Plumbing Supplies MacValve 22mm Chrome Plated Angled Auto Bypass Valve

The MacValve 22mm Chrome Plated Angled Auto Bypass Valve is designed to maintain efficient water circulation in central heating systems. It automatically opens to allow flow when thermostatic radiator valves close, preventing pressure build-up and protecting system components. With adjustable pressure settings and a durable chrome-plated finish, it offers reliable and long-lasting performance.

MacDonald Plumbing Supplies MacTRV 15mm White Head TRV & Lockshield Pack

The MacTRV 15mm White Head TRV & Lockshield Pack is a complete solution for controlling radiator temperature efficiently. Featuring a 15mm angled thermostatic radiator valve and matching lockshield, it allows precise heat regulation while improving energy efficiency. With a liquid-filled sensor and built-in frost protection, it ensures consistent performance in domestic heating systems.

McAlpine V1M-BL Multi Fit Swept Tee 1½ Black

  The McAlpine V1M-BL Multifit Swept Tee is a black polypropylene fitting designed to seamlessly connect a 1½ inch boiler condensate pipe to a waste pipe. This practical tee eliminates the need for additional holes by integrating the condensate into existing pipework. Suitable for plastic, copper, and lead pipes, and compliant with BS EN 1451-1:2017 and BS EN 1329-1:2020, it offers a quick and tidy solution for your plumbing needs.

McAlpine S20L 135 Degree Surefit Bend 1¼

The McAlpine S20L 135 Degree Surefit Bend is a high-quality, pushfit connector designed for 1¼ inch (32mm) waste pipes. Part of McAlpine’s Surefit system, this bend allows for easy and secure installation without additional tools. Suitable for both domestic and commercial plumbing systems, it ensures a reliable, watertight connection with precision engineering and robust construction.

McAlpine S28M-BL Multi Fit Straight Connector 1¼ Black

The McAlpine S28M-BL Multifit Straight Connector is a black polypropylene connector designed for 1¼ inch waste pipes. It features internal pipe guides for easy installation and is compatible with all plastic, copper, and lead pipes, meeting BS EN 1451-1:2017 and BS EN 1329-1:2020 standards. Its robust construction ensures a reliable, leak-free connection in both domestic and commercial plumbing systems.

McAlpine ST28M-BL Multi Fit Reducing Connector 1½ x 1¼ Black

The McAlpine ST28M-BL Multifit Reducing Connector is designed for transitioning between 1½ inch and 1¼ inch waste pipes. Made from durable black polypropylene, this connector ensures a perfect fit with no leaks and simplifies the process of extending or modifying pipework. Quick to install without adhesives, it’s ideal for sink waste applications and compatible with plastic, copper, and lead pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 standards.

McAlpine ST90MECPTOP+SUPP Chrome Plated Plastic Flange 110mm

The McAlpine ST90MECPTOP+SUPP is a 110mm chrome-plated plastic flange designed to fit McAlpine ST90CP10-70, ST90CB10-70, and ST90WH10-70 traps. Suitable for trays with a thickness ranging from 0-23mm (or 5-30mm for specific models), this durable plastic flange ensures a secure and stylish finish. It is a reliable component for enhancing the functionality and appearance of your trap system.

McAlpine MT4-BL 90 Deg Multi Fit Bend 1½ Black

  The McAlpine MT4-BL 90° Multifit Bend 1½ Black is designed for versatile plumbing applications, accommodating all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020, as well as copper and lead pipes. This 90° bend offers a reliable and secure connection, making it a practical choice for both professional and DIY plumbing projects.

McAlpine PUB-CPB-1M Polished Stainless Steel Flange Pop Up Bath Waste 1½ x 70mm x 1mtr

The McAlpine PUB-CPB-1M Polished Stainless Steel Flange Pop-Up Bath Waste features a sleek 70mm polished stainless steel flange and a convenient pop-up mechanism. Designed for standard 1½" plumbing configurations, this bath waste includes a 1m cable and a removable grid for easy cleaning. Ideal for both large-scale projects and DIY installations, it ensures a secure, modern, and efficient drainage solution.

McAlpine RP1 Blank Plug ¾

The McAlpine RP1 Blank Plug ¾" is a high-quality plastic blanking plug designed to seal off unused ¾" BSP threaded outlets in plumbing systems. Ideal for isolating spare ports on washing machine traps, dishwashers, and other appliances, this lightweight yet durable plug ensures a watertight seal. Made from robust plastic, it’s easy to install and remove, making it suitable for both professional installers and DIYers.

McAlpine CD1000-VL 1000mm Channel Drain for Vinyl Flooring

Enhance your drainage system with the McAlpine CD1000-VL 1000mm Channel Drain for Vinyl Flooring. Featuring a grade 304 stainless steel cover plate, this channel drain includes a 50mm water seal trap and adjustable height support legs, providing a flow rate of 54 litres per minute under a constant 120mm head of water.

McAlpine CD600-VL 600mm Channel Drain for Vinyl Flooring

  The McAlpine CD600-VL 600mm Channel Drain for Vinyl Flooring is a high-quality drainage solution featuring a grade 304 stainless steel cover plate, a 50mm water seal trap, and adjustable height support legs. With a flow rate of 54 litres per minute, this channel drain ensures efficient water management, making it perfect for both residential and commercial applications.

McAlpine CD800-VL 800mm Channel Drain for Vinyl Flooring

  The McAlpine CD800-VL 800mm Channel Drain for Vinyl Flooring provides a reliable and efficient drainage solution with a grade 304 stainless steel cover plate, a 50mm water seal trap, and adjustable height support legs. This channel drain boasts a flow rate of 54 litres per minute, making it ideal for both residential and commercial applications.

McAlpine MS4-BL 90 Deg Multi Fit Bend 1¼ Black

  The McAlpine MS4-BL 90° Multifit Bend 1¼ Black is a versatile and durable bend designed to fit a wide range of pipe types. With its multifit design, it accommodates all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020, as well as copper and lead pipes. This 90° bend ensures a secure and reliable connection, making it ideal for various plumbing applications.

Danfoss Motorised Valve HP22B Paddle Type 2 Port 22mm DF087N660900

The Danfoss Motorised Valve HP22B Paddle Type 2 Port 22mm DF087N660900 is a high-performance valve designed for precise flow control in domestic and commercial heating systems. Featuring a paddle type mechanism for reliable shut-off and a robust construction, it ensures efficient operation and long service life. With a high flow rate and compatibility with a range of actuators, it offers flexibility for various heating applications.

MacDonald Plumbing Supplies MacValve Pushfit Stem Elbow 15mm x 10mm Chrome Plated

The MacValve Pushfit Stem Elbow 15mm x 10mm Chrome Plated is the perfect solution for creating angled connections in confined plumbing spaces. This pushfit fitting is designed for rapid, tool-free installation—just push to connect and achieve a strong, leak-resistant joint. With its corrosion-resistant chrome finish, it offers both durability and professional appearance, making it ideal for residential and commercial plumbing jobs.  

Trappex Expansion Vessel Service Valve ¾

Ensure efficient maintenance of your heating system with the Trappex Expansion Vessel Service Valve. This valve offers convenient access for draining, repressurising, and adding chemical inhibitor to your expansion vessel. With its integrated filling loop assembly and isolation capability, it simplifies maintenance tasks while minimising downtime.

McAlpine Z23MR Blanking Off Cap 2"

Manufactured in synthetic rubber  

McAlpine Z30 Surefit Pipe Clip 2"

The McAlpine Z30 Surefit Pipe Clip is designed to secure 2-inch waste pipes in plumbing installations. Compatible with McAlpine HDPE Waste Pipe, these clips offer reliable support and stability.

McAlpine Z4L Surefit 90 Degree Bend 2"

This bend offers seamless integration and durability.

McAlpine Z8A BSP Nut Ordinary 2"

The McAlpine Z8A BSP Nut Ordinary 2" is a standard plumbing component designed for a wide range of plumbing applications, ensuring secure and reliable connections.

McAlpine Z8M Multi Fit Loose Nut 2"

The McAlpine Z8M Multifit Loose Nut 2" offers versatile compatibility with various plastic waste pipes, copper pipes, and lead pipes, ensuring reliable connections in plumbing systems.

McAlpine WM3-CAP Standpipe Cap For Use With WM3

For use with WM3 Trap to cap off standpipe

McAlpine Z21A Multi Fit Caulking Ferrule 2"

The McAlpine Z21A Multi Fit Caulking Ferrule 2" is a high-quality, versatile waste pipe connector designed to suit a range of domestic and commercial plumbing applications. Manufactured in durable polypropylene, it is compatible with plastic, copper, and lead pipes. The multifit design ensures secure connections across varying pipe types, making it ideal for installers looking for a reliable and easy-to-use fitting. It conforms to BS EN 1451-1:2017 and BS EN 1329-1:2020, ensuring peace of mind and long-lasting performance.

McAlpine Z23L Surefit Blank Cap 2"

The McAlpine Z23L Surefit Blank Cap is designed specifically for McAlpine HDPE waste pipe systems, offering a reliable solution for capping off 2-inch connections.

McAlpine T4L Surefit 90 Degree Bend 1½

This bend offers seamless integration and durability.

McAlpine T8A BSP Nut Ordinary 1½

The McAlpine T8A BSP Nut Ordinary 1½ is a standard plumbing component designed for versatile use in plumbing systems.

McAlpine T8M Multi Fit Loose Nut 1½

The McAlpine T8M Multifit Loose Nut 1½ offers versatile compatibility with various plastic waste pipes, copper pipes, and lead pipes, ensuring reliable connections in plumbing systems.

McAlpine T23L Surefit Blank Cap 1½

The McAlpine T23L Surefit Blank Cap is designed specifically for McAlpine HDPE waste pipe systems, offering a reliable solution for capping off 1½-inch connections.

McAlpine T30 Surefit Pipe Clip 1½

The McAlpine T30 Surefit Pipe Clip is designed to secure 1½ inch waste pipes in plumbing installations. Compatible with McAlpine HDPE Waste Pipe, these clips offer reliable support and stability.

McAlpine S4L Surefit 90 Degree Bend 1¼

This bend offers seamless integration and durability.

McAlpine S8A BSP Nut Ordinary 1¼

The McAlpine S8A BSP Nut Ordinary 1¼ is a standard plumbing component suitable for various applications.

McAlpine S8M Multi Fit Loose Nut 1¼

The McAlpine S8M Multifit Loose Nut 1¼ offers versatile compatibility with various plastic waste pipes, copper pipes, and lead pipes, ensuring reliable connections in plumbing systems.

McAlpine RS2 Macflash 18" X 24" For 4"/110mm Pipe

Manufactured in high grade aluminium with a die-formed synthetic rubber collar Quickly and easily installed offering cost saving in material and labour against traditional lead roof slates Suitable for flat roofs and roof pitches up to 45 degrees

McAlpine RS3 Macflash 24" X 24" For 4"/110mm Pipe

Manufactured in high grade aluminium with a die-formed synthetic rubber collar Quickly and easily installed offering cost saving in material and labour against traditional lead roof slates Suitable for flat roofs and roof pitches up to 45 degrees

McAlpine RS4 Macflash 18" X 18" For 3"/75mm Pipe

Manufactured in high grade aluminium with a die-formed synthetic rubber collar Quickly and easily installed offering cost saving in material and labour against traditional lead roof slates Suitable for flat roofs and roof pitches up to 45 degrees

McAlpine RS7 Macflash 18" X 18" For 2"/50mm Pipe

Manufactured in high grade aluminium with a die-formed synthetic rubber collar Quickly and easily installed offering cost saving in material and labour against traditional lead roof slates Suitable for flat roofs and roof pitches up to 45 degrees

McAlpine S23L Surefit Blank Cap 1¼

The McAlpine S23L Surefit Blank Cap is designed specifically for McAlpine HDPE waste pipe systems, offering a reliable solution for capping off 1¼-inch connections.

McAlpine MZ18E Multi Fit Adjustable Straight Connector 2"

Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe.

McAlpine NUT-BLANK-WH Female Blank Cap 1"

Blanks off traps and fittings with 1″ male thread

McAlpine NUT-WMVALVE Female Blank Cap ¾

Blanks off appliance valves with ¾” thread.

McAlpine MINIFLEX-4 Short Miniflex Flexible Connectors 1¼ Universal Compression Connection X 1¼ Plain Spigot

Miniflex Connectors offer maximum flexibility when conventional fittings cannot be used The fitting can be used up to 90° The fitting is flexible as well as extendable

McAlpine MINIFLEX-5 Short Miniflex Flexible Connectors 1½ Universal Compression Connection X 1½ Plain Spigot

Miniflex Connectors offer maximum flexibility when conventional fittings cannot be used The fitting can be used up to 90° The fitting is flexible as well as extendable

McAlpine DC1GR-OS Offset Drain Connector 4"/110mm Grey

14mm Offset Finned seal spigot for internal connection to 4″/110mm cast iron, plastic or clay

McAlpine DC3BL-OS Offset Drain Reducer Connector 4"/110mm X 2" Black

Finned seal spigot for internal connection to 4″/110mm cast iron, plastic or clay Ideal for low level connections

McAlpine FLEX-JKS Flexible Fitting BSP Coupling Nut X Male Thread 1¼ X 195mm-370mm

Offers complete flexibility for any required angle or offset

McAlpine FLEXCON4 Flexible Fitting Universal X Universal 1½

Offers complete flexibility for any required angle or offset

McAlpine FLEXCON7 Flexible Fitting Universal X Universal 2"

Offers complete flexibility for any required angle or offset

McAlpine FLEXCON8 Flexible Fitting Universal X Plain Spigot 2"

Offers complete flexibility for any required angle or offset Universal Outlet Connection and PVC Plain Spigot to BS EN 1329-1:2000

McAlpine FLEXCON9 Flexible Fitting BSP Coupling Nut X Male Thread 1½ X 260mm-530mm

Offers complete flexibility for any required angle or offset

McAlpine CONTRAP2 Condensation Trap 125mm

Straight Socket Connector to 110mm or 125mm pipe (commonly used as ducting for basic air extraction systems) Provides an internal trap/diverter which will collect condensation forming on the internal surface of the extract pipework

McAlpine CPTSG Conversion Cover Plate 1½

Used to seal off Gully or to convert to a drain connection to allow for installation of bath waste.

McAlpine 40K-CB Blanking Cap For Chrome Plated Brass Compression Tee (42E-CB)

Blanking Cap for Chrome Plated Brass Compression Tee (42E-CB)

Todays Tools Pit Bull Folding Bucket 11L PBFB

The Todays Tools Pit Bull Folding Bucket 11L PBFB is a practical, lightweight and highly durable solution for everyday trade, DIY and outdoor tasks. With an 11 litre capacity, it provides ample volume for carrying water, tools, cleaning supplies or materials while remaining easy to store and transport. Its foldable design allows it to collapse flat, making it ideal for vans, tool bags and tight storage spaces. Built with leakproof construction and reinforced seams, this bucket offers long lasting reliability whether used on site, in the garden or during maintenance work. A convenient, multi purpose option for anyone needing a portable and dependable bucket.

Altecnic Caleffi XS 22mm Filter 545912

The Altecnic Caleffi XS 22mm Magnetic Filter 545912 is a compact and highly efficient magnetic system filter designed to protect domestic heating systems from circulating debris. Featuring a powerful internal magnet and stainless steel mesh filter, it captures both magnetic and non-magnetic contaminants to help maintain boiler efficiency and prolong system life. With integrated isolation, visual inspection windows, and 22mm compression connections, it offers simple installation and straightforward servicing.

MacDonald Plumbing Supplies MacPress 22mm Red/Blue Lever Valves M Profile WRAS Approved

The MacPress 22mm Red/Blue Lever Valves M Profile are WRAS approved, offering reliable water flow control for press fit plumbing systems. Featuring convenient red and blue lever handles, they ensure easy operation and compliance with regulatory standards. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 15mm Red/Blue Lever Valves M Profile WRAS Approved

The MacPress 15mm Red/Blue Lever Valves M Profile are WRAS approved, offering reliable water flow control for press fit plumbing systems. Featuring convenient red and blue lever handles, they ensure easy operation and compliance with regulatory standards. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

McAlpine BOSSCONN110Z-GR Black Mechanical Soil Pipe Boss Connector Grey 4" X 2"

The McAlpine BOSSCONN110Z-GR Black Mechanical Soil Pipe Boss Connector is a robust and reliable solution for connecting waste water or condensate discharge to 110mm soil pipe systems. Designed to fit a 57mm hole size, this mechanical boss connector enables fast, tool-free dry fixing. It’s compatible with both push-fit and solvent weld waste pipework, offering exceptional versatility. Supplied with a fixing tool, it ensures secure installation and long-term performance without the need for adhesives or sealants. A practical, regulation-compliant solution for soil system branching.

MacDonald Plumbing Supplies MacVent 15mm Compression Air Vent

The MacVent 15mm Compression Air Vent is a versatile manual air vent designed for use with 15mm compression fittings in heating, cooling, and other wet systems. Manufactured from durable brass, it can replace a standard 15mm olive to provide a convenient venting point. Suitable for both temporary and permanent applications, it offers a reusable and practical solution for installers working on vented and unvented systems.

Regin Tubing & Cable Storage Zip Bag REGR08

The Regin Tubing & Cable Storage Zip Bag REGR08 is a durable and practical storage solution designed to keep hoses, tubing, and cables neatly organised during transport and storage. Manufactured from high-quality Oxford cloth with a water-resistant finish, it helps protect equipment from dirt and moisture while reducing tangles. Ideal for storing drain down hose kits, plumbing tubing, or EV charging cables, this lightweight zip bag is an essential accessory for professional tradespeople.

Rob Pond Washing Machine Valve Cap ¾

The Rob Pond 3/4" Washing Machine Valve Cap - WMVCAP is a replacement cap designed specifically for washing machine valves.

MacDonald Plumbing Supplies 15mm Blue Butterfly Valve

Our 15mm Blue Butterfly Valve provides efficient flow control for plumbing systems.

MacDonald Plumbing Supplies 15mm Red Butterfly Valve

Our 15mm Red Butterfly Valve - BBV15R provides efficient flow control for plumbing systems.

MacDonald Plumbing Supplies 22mm Blue Butterfly Valve

Our 22mm Blue Butterfly Valve provides efficient flow control for plumbing systems.

MacDonald Plumbing Supplies 22mm Red Butterfly Valve

Our 22mm Red Butterfly Valve provides efficient flow control for plumbing systems.

Hotun SF Range Black 15 - 22 Dry Trap Tundish HBSF15-22

The revolutionary, market-leading, plumber-designed Hotun dry trap tundish allows a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Allowing both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline which makes it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. This means that diagnoses of any faults is quick and simple. Hotun fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge

Hotun SF Range White 15 - 22 Dry Trap Tundish HWSF15-22

The revolutionary, market-leading, plumber-designed Hotun dry trap tundish allows a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Allowing both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline which makes it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. This means that diagnoses of any faults is quick and simple. Hotun fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge

Hotun SF Range Hiflo Black 15 - 32 Dry Trap Tundish HHBSF15-32

From the manufacturer that brought you the revolutionary, market-leading, plumber-designed Hotun dry trap tundish, here is our latest innovation, the Hotun Hiflo sf push-fit dry trap tundish. Allowing a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Taking both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline making it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers and now, with its push-fit inlet connection, can be fitted in seconds. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. Making diagnoses of any faults quick and simple. Hotun Hiflo sf is WRAS approved and fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge.

Hotun SF Range Hiflo White 15 - 32 Dry Trap Tundish HHWSF15-32

From the manufacturer that brought you the revolutionary, market-leading, plumber-designed Hotun dry trap tundish, here is our latest innovation, the Hotun Hiflo sf push-fit dry trap tundish. Allowing a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Taking both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline making it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers and now, with its push-fit inlet connection, can be fitted in seconds. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. Making diagnoses of any faults quick and simple. Hotun Hiflo sf is WRAS approved and fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge.

Hotun SF Range XL 22 - 32 Dry Trap Tundish HXLSF22-32

From the manufacturer that brought you the revolutionary, market-leading, plumber-designed Hotun dry trap tundish, here is our latest innovation, the Hotun xl sf push-fit dry trap tundish. Allowing a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Taking both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline making it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers and now, with its push-fit inlet connection, can be fitted in seconds. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. Making diagnoses of any faults quick and simple. Hotun xl sf is WRAS approved and fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge.

Hotun White 15 - 22 Dry Trap Tundish HW100C15-22

The revolutionary, market-leading, plumber-designed hotun dry trap tundish allows a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Allowing both trickle and full flow but preventing foul odours and gases from coming back into a property, hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline which makes it ideal for use in hard water areas. Award-winning and cost effective, Hotun  is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. This means that diagnoses of any faults is quick and simple. Hotun is WRAS approved and fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge.

Hotun Hiflo Black 15 - 32 Dry Trap Tundish HHB100C15-32

The revolutionary, market-leading, plumber-designed Hotun dry trap tundish allows a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Allowing both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline which makes it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. This means that diagnoses of any faults is quick and simple. Hotun fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge

Hotun Hiflo White 15 - 32 Dry Trap Tundish HHW100C15-32

The revolutionary, market-leading, plumber-designed Hotun dry trap tundish allows a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Allowing both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline which makes it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. This means that diagnoses of any faults is quick and simple. Hotun fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge

Hotun Black 15 - 22 Dry Trap Tundish HB100C15-22

The revolutionary, market-leading, plumber-designed hotun dry trap tundish allows a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Allowing both trickle and full flow but preventing foul odours and gases from coming back into a property, hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline which makes it ideal for use in hard water areas. Award-winning and cost effective, Hotun  is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. This means that diagnoses of any faults is quick and simple. Hotun is WRAS approved and fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge.

Regin 1/2" Fibre Washer Y.I.F - REGQ121

REGQ121 - 1/2" Fibre Washer Y.I.F

Todays Tools 144Pc Popular Plumbers Washer Set PLW

The Todays Tools 144Pc Popular Plumbers Washer Set PLW contains a comprehensive selection of commonly used rubber and fibre washers for everyday plumbing and maintenance work. With 144 washers covering a range of popular sizes and types, this handy set provides a convenient solution for repairs, servicing and installation work. Supplied as a practical assortment, it is ideal for plumbers, heating engineers and DIY users who need a selection of replacement washers readily available.

Todays Tools Plumb Tub PT

The Todays Tools Plumb Tub PT is a flexible and durable drain down tub designed to make radiator draining cleaner and easier. It clips securely around 10mm, 15mm and 22mm pipework and can be used with both vertical and horizontal pipes. Its flexible construction allows it to be compressed into low or awkward spaces, while its approximately 1.4 litre capacity helps collect water and reduce the risk of stains and spills when draining radiators.

MacDonald Plumbing Supplies MacValve 1/2 Wallplate with 15mm x 350mm Copper Tube

Streamline your plumbing projects with our 1/2" Wallplate featuring a 15mm x 350mm Copper Tube. This comprehensive package offers a convenient solution for connecting your plumbing system securely and efficiently.

Gledhill SL Plus Direct 250 EE Open Vented PLUDR250OV

The direct model comes complete with two immersions, one for on-peak use and one for off-peak use. This allows the store of water to be heated utilising off-peak electricity, making the unit extremely efficient. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note the 90 litre model is only supplied with one immersion.)

Gledhill SL Plus Direct 300 EE Open Vented PLUDR300OV

The direct model comes complete with two immersions, one for on-peak use and one for off-peak use. This allows the store of water to be heated utilising off-peak electricity, making the unit extremely efficient. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note the 90 litre model is only supplied with one immersion.)

Gledhill SL Plus Direct 90 EE Open Vented PLUDR090OV

The direct model comes complete with two immersions, one for on-peak use and one for off-peak use. This allows the store of water to be heated utilising off-peak electricity, making the unit extremely efficient. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note the 90 litre model is only supplied with one immersion.)

Gledhill SL Plus Direct 120 EE Open Vented PLUDR120OV

The direct model comes complete with two immersions, one for on-peak use and one for off-peak use. This allows the store of water to be heated utilising off-peak electricity, making the unit extremely efficient. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note the 90 litre model is only supplied with one immersion.)

Gledhill SL Plus Direct 150 EE Open Vented PLUDR150OV

The direct model comes complete with two immersions, one for on-peak use and one for off-peak use. This allows the store of water to be heated utilising off-peak electricity, making the unit extremely efficient. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note the 90 litre model is only supplied with one immersion.)

Gledhill SL Plus Direct 180 EE Open Vented PLUDR180OV

The direct model comes complete with two immersions, one for on-peak use and one for off-peak use. This allows the store of water to be heated utilising off-peak electricity, making the unit extremely efficient. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note the 90 litre model is only supplied with one immersion.)

Gledhill SL Plus Direct 210 EE Open Vented PLUDR210OV

The direct model comes complete with two immersions, one for on-peak use and one for off-peak use. This allows the store of water to be heated utilising off-peak electricity, making the unit extremely efficient. All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius. (Please note the 90 litre model is only supplied with one immersion.)

MacDonald Plumbing Supplies MacValve 15mm x ½ Male Iron Monobloc Tail Adaptor

The MacValve 15mm x ½" Male Iron Monobloc Tail Adaptor is a practical solution for converting standard 15mm valves or flexi tap connectors into a flat face connection. Designed specifically for use with monobloc taps featuring flexible tails and ½" swivel nuts, this adaptor fits neatly into an isolating valve to provide a reliable flat face sealing surface. Ideal for both new installations and replacement work, it ensures a secure and professional connection while helping to eliminate leaks caused by mismatched fittings. Suitable for everyday plumbing applications, it offers convenience, compatibility, and dependable performance.

MacDonald Plumbing Supplies MacValve 15mm x ⅜ Male Iron Monobloc Tail Adaptor

The MacValve 15mm x 3/8" Male Iron Monobloc Tail Adaptor is designed to convert standard 15mm valves or flexi tap connectors into a flat face connection suitable for monobloc taps with 3/8" flexible tails. By fitting directly into an isolating valve, it provides a clean, flat sealing surface for the swivel nut on the tap tail, helping to achieve a secure and leak-free installation. Ideal for both new installations and replacement work, this adaptor offers a simple and effective solution for modern tap connections in domestic and commercial plumbing applications.

McAlpine RS1 Macflash 18" X 18" For 4"/110mm Pipe

Manufactured in high grade aluminium with a die-formed synthetic rubber collar Quickly and easily installed offering cost saving in material and labour against traditional lead roof slates Suitable for flat roofs and roof pitches up to 45 degrees

MacDonald Plumbing Supplies Brass Stopcock 22mm WRAS Approved

This WRAS approved 22mm brass stopcock provides reliable control over water flow, making it an essential component for plumbing systems.

MacDonald Plumbing Supplies Red & Blue Lever Ball Valve 22mm Full Bore WRAS Approved

The Red & Blue Lever Ball Valve 22mm Full Bore WRAS Approved provides a reliable and efficient solution for controlling water flow in plumbing systems. Featuring a full bore design, it allows unrestricted water passage, minimising pressure drop and maximising system efficiency. The dual-colour lever handles (red for hot and blue for cold) ensure clear identification, simplifying installation and maintenance. WRAS approved, this valve meets stringent UK standards for potable water, ensuring safety and compliance. Suitable for both domestic and commercial applications, it delivers long-lasting performance, durability, and ease of use.

MacDonald Plumbing Supplies WRAS Approved Double Check Valve 15mm

This WRAS approved double check valve (15mm) provides reliable backflow prevention and is an essential component for plumbing systems.

MacDonald Plumbing Supplies Brass Gate Valve Compression WRAS Approved 22mm

This 22mm brass gate valve is WRAS approved and provides reliable shut-off control for plumbing systems with its compression fitting.

MacDonald Plumbing Supplies Red & Blue Lever Ball Valve 15mm Full Bore WRAS Approved

The Red & Blue Lever Ball Valve 15mm Full Bore WRAS Approved is a high-quality valve designed for reliable flow control in plumbing systems. With a full bore design, it allows unrestricted water flow, reducing pressure loss and enhancing system efficiency. The dual-colour lever handles (red for hot and blue for cold) provide clear identification, making installation and maintenance simple and safe. WRAS approved, this valve meets strict UK standards for potable water applications, ensuring compliance and safety. Ideal for both domestic and commercial installations, it delivers robust performance, long service life, and ease of use.

MacDonald Plumbing Supplies Brass Gate Valve Compression WRAS Approved 15mm

This 15mm brass gate valve is WRAS approved and provides reliable shut-off control for plumbing systems with its compression fitting.

MacDonald Plumbing Supplies Brass Stopcock 15mm WRAS Approved

This WRAS approved 15mm brass stopcock provides reliable control over water flow, making it an essential component for plumbing systems.

MacDonald Plumbing Supplies MacCompression Stop End 22mm

Discover top-quality Compression Stop Ends, perfect for various applications including central heating and hot & cold water supplies. No soldering or heat required, these fittings are convenient for confined spaces, offering a cost-effective and reliable solution. WRAS approved and compliant with BSEN1254-2 standards, ensuring suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacCompression Stop End 15mm

Discover top-quality Compression Stop Ends, perfect for various applications including central heating and hot & cold water supplies. No soldering or heat required, these fittings are convenient for confined spaces, offering a cost-effective and reliable solution. WRAS approved and compliant with BSEN1254-2 standards, ensuring suitability for potable water and central heating systems.

MacDonald Plumbing Supplies Chrome Plated Isolating Valve With Black Lever 15mm WRAS

Chrome Plated Isolating Valve With Black Lever 15mm WRAS. Designed for both form and function, this high-quality valve features a sleek chrome-plated finish paired with a striking black lever handle for effortless control and modern appeal. Engineered for 15mm pipework, it provides easy isolation of water flow during maintenance or repairs. Suitable for both domestic and commercial systems, this WRAS approved valve delivers reliable performance and refined aesthetics.

MacDonald Plumbing Supplies Gate Type Pump Valve 22mm WRAS Approved

This Gate Type Pump Valve (22mm) with WRAS approval provides reliable flow control for pump systems.

MacDonald Plumbing Supplies Chrome Plated Isolating Valve Full Bore 15mm

This full bore 15mm chrome plated isolating valve combines style and functionality, providing reliable water flow control for plumbing systems.

MacDonald Plumbing Supplies Drain Off Valve Type A 1/2"

The Drain Off Valve Type A 1/2" provides a reliable and efficient solution for draining water from plumbing systems.

MacDonald Plumbing Supplies Drain Off Valve Type A 3/4"

The Drain Off Valve Type A 3/4" provides an effective and convenient solution for draining water from plumbing systems.

MacDonald Plumbing Supplies WRAS Approved Flexi Tap Connector 15mm x 1/2" x 300mm

The WRAS Approved Flexi Tap Connector 15mm x 1/2" x 300mm is a high-quality flexible plumbing connector designed to provide a secure and leak-free connection between a tap and the water supply pipe. With a durable stainless steel braided outer layer and EPDM rubber inner tube, it offers excellent flexibility, strength, and resistance to corrosion. WRAS approval ensures suitability for potable water systems and compliance with water regulations.

MacDonald Plumbing Supplies WRAS Approved Flexi Tap Connector with Isolator 15mm x 1/2" x 300mm

The WRAS Approved Flexi Tap Connector with Isolator 15mm x 1/2" x 300mm is a high-quality flexible plumbing connector designed to provide a secure and convenient connection between a tap and the water supply. Featuring an integrated isolator valve, it allows water flow to be shut off at the point of connection for easy maintenance and servicing. Constructed with a stainless steel braided outer layer and EPDM inner tube, it offers durability, flexibility, and WRAS approved safety for potable water systems.

Speedfit 15mm Stop End PSE4615W (Pack of 10)

The Speedfit 15mm Stop End PSE4615W offers a simple and secure solution for capping off 15mm pipework in both temporary and permanent installations. This push-fit fitting can be easily installed and demounted without tools, making it perfect for situations where you need to pause work or perform pressure testing. It is WRAS approved for use with hot and cold water and central heating systems. Manufactured in the UK and backed by a 50-year guarantee.  

Speedfit 22mm Stop End PSE4622W (Pack of 5)

The Speedfit 22mm Stop End PSE4622W offers a reliable solution for capping off 22mm pipework at termination points, ideal for both temporary and permanent installations. This push-fit fitting ensures a quick, tool-free installation and removal, perfect for situations where work needs to pause or pressure testing is required. It is WRAS approved for use with hot and cold water systems, offering a secure and corrosion-resistant seal. Designed, manufactured, and assembled in the UK, and supported by a 50-year guarantee.  

Speedfit 15mm Brass Drain Cock 15BDC (Pack of 5)

The Speedfit 15mm Brass Drain Cock (15BDC) is a reliable and robust drain-off point for central heating systems. Designed for easy installation and long-term performance, it is manufactured using durable DZR brass for maximum resistance to corrosion. Compatible with both copper and plastic pipe systems, this drain cock is ideal for safely emptying heating circuits during maintenance or upgrades. Manufactured in the UK and trusted by professional installers.

Eastbrook 15mm Lockshield With Drain Valve Chrome 12.052

Product DataHeight (mm) = n/aLength (mm) = n/aWidth (mm) = n/aInternal Depth (mm) = n/aWater Capacity (Litres) = n/aAdjustment (mm) = n/aBar Pressure Key = n/aColour = ChromeDoor Opening (mm) = n/aEasy clean glass = n/aElement Power = n/aEnclosure Size = n/aGlass Thickness (mm) = n/aMaterial = BrassMinimum Bar Pressure required = n/aNumber of grips Supported = n/aNumber of Tap holes = n/aProduct Range = Radiator ValvesTray Plan = n/aBTU Range ΔT60°C = n/aBTU Delta ΔT60°C = n/aWatts Delta ΔT60°C = n/aBTU Delta ΔT50°C = n/aWatts Delta ΔT50°C = n/aBTU Range ΔT50°C = n/aProduct Type = Radiator ValveFlow rate Litres/Min (1.0 bar) = n/aFlow rate Litres/Min (2.0 bar) = n/aFlow rate Litres/Min (3.0 bar) = n/aFrosted Glass? = n/aGlass Type = n/aManufacturers Warranty (years) = 2Supplied with fixings? = n/aSchema classification = ValvesNumber of Horizontal Bars = n/aNumber of Vertical Bars = n/aNumber of Vertical Panels = n/aPanel thickness (mm) = n/aValve Types = Drain OffWRAS Approved = n/a

Altecnic 1/5"x 15mm Drain Off Tail Piece YU-JQAL213HC

SPECIFICATION Max. working pressure (static): 10 bar, Max. temperature: 100 ˚C, Medium: water, glycol solution, Max percentage of glycol: 30%

Altecnic 15mm Eres Angled Radiator Valve with Drain Off ER-15MMDOVAL

SPECIFICATION Max. inlet pressure: 20 bar, Max. temperature: 85˚C Medium: water, glycol solution, Max. percentage glycol: 30%

MacDonald Plumbing Supplies MacValve Chrome Plated 15mm Iso Valve - WRAS Approved

Upgrade your water control system with our Chrome Plated 15mm Contract Iso Valve. This valve is designed to provide efficient and reliable shut-off functionality, making it an essential component in any plumbing installation.

MacDonald Plumbing Supplies MacValve Hose Union Bib Tap 1/2 WRAS Approved

The 1/2" Hose Union Bibtap VHBT EN1213 is a durable and reliable solution for your outdoor water supply needs. Designed for easy hose connection, this bibtap provides a convenient way to access water for gardening, cleaning, and other outdoor tasks.

McAlpine FLEXCON2-LN Flexible Connector Universal X BSP Coupling Nut 1½

Offers complete flexibility for any required angle or offset 1½” Universal Outlet Connection x 1½” BSP coupling nut

McAlpine MINIFLEX-1 Short Miniflex Flexible Connectors 1¼ X 1¼ Universal Compression Connection

Miniflex Connectors offer maximum flexibility when conventional fittings cannot be used The fitting can be used up to 90° The fitting is flexible as well as extendable Used to solve problems where flexibility is required

McAlpine MINIFLEX-2 Short Miniflex Flexible Connectors 1½ X 1½ Universal Compression Connection

Miniflex Connectors offer maximum flexibility when conventional fittings cannot be used The fitting can be used up to 90° The fitting is flexible as well as extendable

McAlpine S23MR Blanking Off Cap 1¼

Temporary Blanking Off Cap for waste pipe

McAlpine T23MR Blanking Off Cap 1½

Temporary Blanking Off Cap for waste pipe

McAlpine CONTRAP1 Condensation Trap 110mm

Straight Socket Connector to 110mm or 125mm pipe (commonly used as ducting for basic air extraction systems) Provides an internal trap/diverter which will collect condensation forming on the internal surface of the extract pipework

McAlpine CAP100 110mm Blanking Off Cap

For temporarily sealing 4″/110mm pipe

McAlpine DC1BL-OS Offset Drain Connector 4"/110mm Black

14mm Offset Finned seal spigot for internal connection to 4″/110mm cast iron, plastic or clay

McAlpine DC2BL-OS Offset Drain Reducer Connector

Finned seal spigot for internal connection to 4″/110mm cast iron, plastic or clay Ideal for low level connections

McAlpine FLEXCON6 Flexible Fitting Universal X Plain Spigot 1½

Offers complete flexibility for any required angle or offset Universal Outlet Connection and PVC Plain Spigot to BS EN 1329-1:2000

McAlpine FLEXCON5 Flexible Fitting Universal X Plain Spigot 1¼

Offers complete flexibility for any required angle or offset Universal Outlet Connection and PVC Plain Spigot to BS EN 1329-1:2000

McAlpine FLEXCON3 Flexible Fitting Universal X Universal 1¼

Offers complete flexibility for any required angle or offset

McAlpine FLEXCON2 Flexible Connector Universal X Plain Spigot 1½

Offers maximum flexibility where conventional fittings cannot be used Universal Outlet Connection Plain spigot to suit Multifit and universal outlet trap or waste fittings

McAlpine FLEXCON1 Flexible Connector Universal X Plain Spigot 1¼

Offers maximum flexibility where conventional fittings cannot be used Universal Outlet Connection Plain spigot to suit Multifit and universal outlet trap or waste fittings

Fluidmaster PRO45B PRO Bottom Entry Fill Valve With Heavy Duty Brass Shank

The Fluidmaster PRO45B PRO Bottom Entry Fill Valve with Heavy Duty Brass Shank is the preferred choice for professional plumbers. Designed for durability and efficiency, it features an ultra-quiet operation, adjustable height from 230mm to 355mm, and an anti-siphon design to prevent water contamination. This fill valve ensures long-lasting performance and fast refilling, making it a reliable addition to any toilet system.

McAlpine WM3 1½ Standpipe Trap 1½

75mm Water Seal 1½” Multifit Compression Outlet suits all plastic, copper and lead pipes Standpipe can be blanked off with WM3-CAP

Regin 3/4" Washing Machine Hose Washer - REGQ195

REGQ195 - 3/4" Washing Machine Hose Washer These fit our 3/4" Brass Caps to give a good seal 

Regin Drain Off Valve Washer (20pk) REGQ192

REGQ192 - Pack of 20 Drain Off valve Washers You never have these on the van when you need one!! Removing these is never easy when they are stuck! This handy tool is perfect for removing stuck washers - Order the Hook & Pick Set 

MacDonald Plumbing Supplies MacValve Angled Isolating Valve CP 15mm x 15mm

The MacValve Angled Isolating Valve CP 15mm x 15mm is a high-quality compression valve designed to provide reliable water isolation while creating a neat and professional pipework installation. Featuring a durable chrome plated finish and an angled design, it is ideal for use in kitchens, bathrooms, utility rooms, and general plumbing applications. Easy to operate with a standard screwdriver, it allows quick isolation of the water supply for maintenance, repairs, or appliance replacement without shutting down the entire system.

MacDonald Plumbing Supplies MacVent 15mm Auto Air Vent Compression

The MacVent 15mm Auto Air Vent Compression offers a high-quality solution to prevent trapped air in heating systems. Built from premium materials, it operates efficiently under pressures up to 10 bar and temperatures up to 100°C, providing consistent and reliable performance in residential and commercial heating applications.

MacDonald Plumbing Supplies MacValve 15mm & 22mm Pressure Reducing Valve & Gauge

The MacValve 15mm & 22mm Pressure Reducing Valve, complete with a pressure gauge, is designed to efficiently regulate and reduce pressure in plumbing and heating systems. With dual compatibility for 15mm and 22mm pipe sizes, this valve offers flexible installation and ensures system protection by controlling excessive water pressure. Adjustable outlet pressure between 1 and 6 bar with a factory pre-set of 3 bar.

Rob Pond 22mm Self Cutting Tap Adaptor

he Rob Pond 22mm Self Cutting Tap Adaptor is a reliable solution for connecting taps to 22mm pipes, providing convenience and a secure connection. This very handy Self Cutting Adaptor is for use in conjunction with Rob Pond 15mm Self Cutting Drain off Cock or Self Cutting Isolation Valve and allows you to fit them to 22mm Copper Pipe quickly & easily Applications: Draining Down: Used in conjunction with the Rob Pond Self Cutting Drain Off Cock, this adaptor allows you to drain live heating systems from 22mm Copper pipe. Ideal when you cannot find or access existing drain points. Branching off existing 22mm Pipework: Used in conjunction with the Rob Pond Self Cutting Isolation Valve, this adaptor allows you to connect new pipe work to existing 22mm Copper pipe on live plumbing & heating systems

Rob Pond Self Cutting Drain Off Cock

The Self Cutting Drain Off Cock is a practical and efficient solution for draining water from plumbing and heating systems without the need for pipe cutting or system dismantling. Designed for quick installation on 15mm copper pipe, it allows plumbers to create an instant drain point even when existing drain valves are inaccessible. Ideal for emergency work and maintenance tasks, this reusable tool enables fast, clean system draining with minimal spillage, making it an essential addition to any professional plumbing kit.

MacDonald Plumbing Supplies MacValve 15mm WRAS Filling Loop Part L

The MacValve 15mm WRAS Filling Loop Part L is a reliable and compliant solution for refilling and maintaining pressure in domestic and commercial heating systems. Designed to meet Part L regulations and fully WRAS approved, it ensures safe operation while preventing backflow contamination. Suitable for use with boilers and other pressurised systems, this filling loop offers a straightforward and dependable method for topping up system pressure.

MacDonald Plumbing Supplies MacPress Long Tail Drain Off Valve Type A 15mm

The MacPress Long Tail Drain Off Valve Type A 15mm offers efficient drainage for gas, LPG, and fuel oil systems. Approved by British Gas to EN 331 standards, this durable valve is ideal for residential and commercial applications, providing reliable performance in demanding environments.     Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacValve 15mm Type A Brass Drain Off Valve

The MacValve 15mm Type A Brass Drain Off Valve is a robust and essential component for ensuring efficient water drainage in plumbing systems. Suitable for both residential and commercial applications, this high-quality valve is designed for durability, corrosion resistance, and ease of use. Perfect for draining radiators, heating systems, and other water-filled equipment.