MacDonald Plumbing Supplies MacVessel Sealed System Filling Kit

The MacVessel Sealed System Filling Kit provides the essential components required for filling and monitoring sealed central heating systems using expansion vessels from 8 to 80 litres. The kit includes a filling loop with two 15mm compression fittings, a 3 bar safety relief valve and gauge, a 3/4 inch manifold, and a red or blue safety valve cap. Supplied as a convenient kit, it helps installers bring the key components together for efficient system installation and servicing. Suitable for use with a range of sealed heating systems and expansion vessel sizes.

Rob Pond PressFit 22mm Perfect Pump Valve Pair

The Rob Pond PressFit 22mm Perfect Pump Valve Pair PPV22-PF provides a reliable and efficient solution for connecting circulating pumps in heating systems. Designed with 22mm M profile press connections and 1½" swivel unions, these valves allow quick installation and secure pump isolation. Manufactured from durable nickel plated brass and rated to 16 bar, they offer excellent strength and long-term reliability. Supplied as a matched pair with rubber washers, they ensure a tight seal and simplify installation for professional heating engineers.

MacDonald Plumbing Supplies MacCompression 22mm Slip Coupling

The MacCompression 22mm Slip Couplings provide a dependable solution for repairing or extending 22mm pipework where movement is limited or access is restricted. Designed with a slip function, these couplings slide along the pipe to bridge gaps or replace damaged sections without requiring pipe disassembly. Manufactured to BS EN 1254-2 standards and WRAS approved, they are suitable for potable water systems and professional plumbing installations. Supplied complete with copper olives, they ensure a secure, watertight seal and reliable long term performance.

MacDonald Plumbing Supplies MacTape Cloth Insulation Tape 50mm x 50mtr Silver

The MacTape Cloth Insulation Tape 50mm x 50Mtr Silver is a reliable, heavy-duty solution designed for professional sealing, jointing and general repair applications. Manufactured from strong yet flexible polythene-coated fabric, this cloth tape delivers excellent durability while remaining easy to handle and apply. The aggressive pressure-sensitive high-tack adhesive ensures a secure bond on a wide range of surfaces, making it ideal for both indoor and outdoor use. With good water resistance and excellent conformability, this tape is well suited for plumbing, heating, electrical and general maintenance tasks where a dependable seal is required.

McAlpine HC2650UK-BB Top Access Bath Trap With Removable Chrome Plated Clicker Waste Brushed Brass 1 1/2

The McAlpine HC2650UK-BB Top Access Bath Trap With Removable Chrome Plated Clicker Waste Brushed Brass 1½″ is an elegant and practical solution for bath installations. Featuring a 50mm water seal and a swivel outlet for flexible fitting, this trap assembly includes a premium brushed brass spring-loaded clicker waste with top access for easy cleaning. Designed to fit most bath types, the adjustable flexible overflow makes installation straightforward. With an overall compact height of only 112mm, it's ideal for space-restricted applications. It conforms to BS EN 274-1:2002 and is compatible with an extension kit for deeper baths.

McAlpine WM11-BL Black Sink Trap With Twin 135 Degree Domestic Appliance Nozzle 1½

The McAlpine WM11-BL is a sleek black sink trap designed for modern kitchens, featuring twin 135° domestic appliance nozzles for seamless integration with washing machines and dishwashers. With a 75mm water seal and a versatile 1½" Multifit compression outlet, it ensures odour prevention and leak-free connections. Its adjustable inlet and space-saving tubular swivel design make it ideal for tight under-sink areas and domestic plumbing upgrades.

McAlpine HANDITRAP-B Water Seal Bottle Handitrap 1¼ / 1½ x 75mm

The McAlpine HANDITRAP-B Water Seal Bottle Handitrap is a versatile, compact bottle trap designed for efficient drainage in bathroom and kitchen installations. Featuring a 75mm water seal, it provides effective odour protection and includes reducers that allow both inlet and outlet connections to be either 1¼” or 1½” to suit a variety of pipe sizes. Its 1½” Multifit compression outlet can be reduced to 1¼”, making it adaptable to different plumbing setups. Made from durable polypropylene, this bottle trap offers reliable performance and easy installation.

McAlpine AA10-BL Black Adjustable Inlet Slim Bottle Trap 1¼

The McAlpine AA10-BL Black Adjustable Inlet Slim Bottle Trap 1¼ is a sleek, space-saving trap designed for modern domestic bathrooms and kitchens. Featuring a 75mm water seal, it effectively prevents odours while its adjustable inlet ensures compatibility with a wide range of pipe layouts. The 1¼” Multifit compression outlet fits plastic, copper, and lead pipes, making this trap a versatile solution for repair, maintenance, and improvement projects. Manufactured from durable polypropylene with a stylish black finish, it conforms to BS EN 274-1:2002 standards.

Todays Tools 50ml That Rapid Blu Gel Anaerobic Sealant Non Drip

Todays Tools That Rapid Blu Gel 50ml Anaerobic Sealant is a powerful, fast-curing solution for sealing metal threaded joints in plumbing, heating, and gas installations. This non-drip, gel-based formula offers precise application with minimal mess, ensuring a secure, leak-proof seal that resists pressure and harsh conditions. Suitable for water, gas, oil, and air systems, this versatile sealant is ideal for professionals and DIY users alike.  

Trappex 28mm Genesis Brass Filter Without Valves

The Trappex 28mm Genesis Brass Filter Without Valves is a compact, high-quality in-line system filter that offers easy installation and quick cleaning. Manufactured with a robust brass body and triple radial EPDM seals, it is designed to capture both magnetic and non-magnetic particles, ensuring optimal system efficiency. This filter can be fitted horizontally or vertically, making it ideal for small or restricted access areas.

McAlpine USG2T6WH Untrapped Gully With 2" Vertical Outlet

The McAlpine USG2T6WH Untrapped Gully is designed for efficient drainage in wet rooms and shower areas. Featuring a 2" vertical outlet, it connects easily to standard plumbing systems. Constructed from durable, corrosion-resistant materials, this gully provides reliable performance and easy maintenance.

McAlpine TSG50-INNERCUP Seal TSG Inner Cup 50mm

The McAlpine TSG50-InnerCup Seal is designed to fit inside the McAlpine TSG50 trapped gully, ensuring a secure and water-tight seal around the waste pipe. This 50mm seal prevents foul odours and gases from escaping into the building, making it ideal for both high-traffic areas and residential or commercial properties. Made from high-quality, chemically resistant materials, the InnerCup is easy to install and complies with all relevant building codes and regulations. Enhance the performance of your TSG50 trapped gully with this reliable and durable accessory.

McAlpine SR10V Water Seal Running Tubular Swivel 'P' Trap 1¼ x 75mm

  The McAlpine SR10V is a 75mm water seal tubular swivel 'P' trap designed for sink and basin installations. Featuring an anti-syphon valve to prevent water loss and a multifit outlet compatible with various pipe sizes, this trap is engineered for efficient blockage prevention and flexible installation. Its running tubular swivel allows for easy adjustment to suit waste pipe angles, making it a versatile and reliable component for plumbing systems.

McAlpine ST90MEWHTOP+SUPP Shower Trap Plastic Cover Top 90mm White

  The McAlpine ST90MEWHTOP+SUPP is a practical and stylish plastic cover top designed for shower traps. With a 90mm diameter, this white plastic cover provides a clean and finished look to your shower trap installation. The cover includes a support bracket to ensure a secure and stable fit. Ideal for use with McAlpine shower traps, this cover helps to conceal and protect the trap while maintaining easy access for maintenance. The durable plastic construction resists moisture and everyday wear, making it a reliable choice for any shower setup.

TruTite Pipe Sealing Cord 160m

The TruTite™ Pipe Sealing Cord – 160m is the best choice for sealing threaded pipes and fittings, offering superior leak protection. Fully WRAS approved, this pipe sealing cord is suitable for potable water applications and ensures a secure seal on both plastic and metal tapered pipe threads up to 4″ in diameter.

McAlpine VSG1T6SS Valve Shower Gully For Tiled Or Stone Floors 1½ Polished Stainless Steel

1½” BS EN 1329-1:2020 Solvent Weld Horizontal Outlet Sheet floor gully suitable for concrete and suspended timber floors Manufactured in ABS to the highest quality The valve acts as a non-return valve, the weight of the water discharge will open the valve and it will reseal when the discharge has ceased thus prohibiting foul air from entering the dwelling.

McAlpine VSG1T6WH Valve Shower Gully For Tiled Or Stone Floors 1½ White ABS

1½” BS EN 1329-1:2020 Solvent Weld Horizontal Outlet Sheet floor gully suitable for concrete and suspended timber floors Manufactured in ABS to the highest quality The valve acts as a non-return valve, the weight of the water discharge will open the valve and it will reseal when the discharge has ceased thus prohibiting foul air from entering the dwelling.

McAlpine VSG1WH Valve Shower Gully For Sheet Flooring 1½ White Plastic

1½” BS EN 1329-1:2020 Solvent Weld Horizontal Outlet Sheet floor gully suitable for concrete and suspended timber floors Manufactured in ABS to the highest quality The valve acts as a non-return valve, the weight of the water discharge will open the valve and it will reseal when the discharge has ceased thus prohibiting foul air from entering the dwelling.

McAlpine VSG1WH-NSC Valve Shower Gully For Sheet Flooring 1½ White Plastic (No Screws)

1½” BS EN 1329-1:2020 Solvent Weld Horizontal Outlet Sheet floor gully suitable for concrete and suspended timber floors Manufactured in ABS to the highest quality The valve acts as a non-return valve. The weight of the water discharge will open the valve and it will reseal when the discharge has ceased, thus prohibiting foul air from entering the dwelling. Eliminates the release of foul air due to backflow.

McAlpine VSG52T6SS Two-piece Valve Shower Gully For Tiled Or Stone Floors 1½ Polished Stainless Steel

1½” BS EN 1329-1:2020 Solvent Weld Horizontal Outlet Tiled/Stone floor gully suitable for concrete and suspended timber floors Manufactured in ABS to the highest quality The valve acts as a non-return valve. The weight of the water discharge will open the valve and it will reseal when the discharge has ceased thus prohibiting foul air from entering the dwelling. Eliminates the release of foul air due to backflow..

McAlpine VSG52T6WH Two-piece Valve Shower Gully For Tiled Or Stone Floors 1½ White ABS

1½” BS EN 1329-1:2020 Solvent Weld Horizontal Outlet Tiled/Stone floor gully suitable for concrete and suspended timber floors Manufactured in ABS to the highest quality The valve acts as a non-return valve. The weight of the water discharge will open the valve and it will reseal when the discharge has ceased thus prohibiting foul air from entering the dwelling. Eliminates the release of foul air due to backflow..

McAlpine VSG52WH Two-piece Valve Shower Gully For Sheet Flooring 1½ White Plastic

1½” BS EN 1329-1:2020 Solvent Weld Horizontal Outlet Tiled/Stone floor gully suitable for concrete and suspended timber floors Manufactured in ABS to the highest quality The valve acts as a non-return valve. The weight of the water discharge will open the valve and it will reseal when the discharge has ceased, thus prohibiting foul air from entering the dwelling. Eliminates the release of foul air due to backflow..

McAlpine VSG52WH-NSC Two-piece Valve Shower Gully For Sheet Flooring 1½ White Plastic (No Screws)

1½” BS EN 1329-1:2020 Solvent Weld Horizontal Outlet Tiled/Stone floor gully suitable for concrete and suspended timber floors Manufactured in ABS to the highest quality The valve acts as a non-return valve. The weight of the water discharge will open the valve and it will reseal when the discharge has ceased, thus prohibiting foul air from entering the dwelling. Eliminates the release of foul air due to backflow..

McAlpine RS2 Macflash 18" X 24" For 4"/110mm Pipe

Manufactured in high grade aluminium with a die-formed synthetic rubber collar Quickly and easily installed offering cost saving in material and labour against traditional lead roof slates Suitable for flat roofs and roof pitches up to 45 degrees

McAlpine RS3 Macflash 24" X 24" For 4"/110mm Pipe

Manufactured in high grade aluminium with a die-formed synthetic rubber collar Quickly and easily installed offering cost saving in material and labour against traditional lead roof slates Suitable for flat roofs and roof pitches up to 45 degrees

McAlpine RS4 Macflash 18" X 18" For 3"/75mm Pipe

Manufactured in high grade aluminium with a die-formed synthetic rubber collar Quickly and easily installed offering cost saving in material and labour against traditional lead roof slates Suitable for flat roofs and roof pitches up to 45 degrees

McAlpine RS7 Macflash 18" X 18" For 2"/50mm Pipe

Manufactured in high grade aluminium with a die-formed synthetic rubber collar Quickly and easily installed offering cost saving in material and labour against traditional lead roof slates Suitable for flat roofs and roof pitches up to 45 degrees

McAlpine MACVALVE-4 Self Closing Waste Valve Compression X Compression 2"

Can be fitted in the horizontal or vertical position The Internal Membrane opens under water pressure to allow the discharge to flow freely and then closes to form a seal to prevent foul odour or sewer gas entering the building. 2″ x 2″ Universal Compression Connections

McAlpine VSG52SL-WH Slimline Floor Gully With Non-Return Valve Round 1½ White

The Shallowest McAlpine Gully available at only 59mm. Suitable for Tiled Flooring. The valve acts as a non-return valve, and the weight of the water discharge will open the valve then it will reseal when the discharge has ceased thus prohibiting foul air from entering the dwelling. Eliminates the release of foul air due to backflow.

Primary Pro Condensate Pro Pack of 10 Sealing Ring for 22mm & 28mm Insulation (AS35)

The Condensate Pro Sealing Rings, available in a pack of 10, play a crucial role in insulating external pipework. These rings provide an airtight seal for enhanced energy efficiency, preventing drafts and heat loss. Additionally, they act as a barrier against insects and moisture penetration, ensuring a well-protected property. Sealing around the insulated pipe passing through the wall is essential for these reasons. Our solution streamlines this process, making it simple and efficient. Coupled with our Primary Pro grinder head, it creates a flush sealing surface on flat walls, saving time and resulting in an aesthetically pleasing finish.

Primary Pro Condensate Pro Pack of 10 Sealing Ring for 35mm Insulation (AS36)

The Condensate Pro Sealing Rings, available in a pack of 10, play a crucial role in insulating external pipework. These rings provide an airtight seal for enhanced energy efficiency, preventing drafts and heat loss. Additionally, they act as a barrier against insects and moisture penetration, ensuring a well-protected property. Sealing around the insulated pipe passing through the wall is essential for these reasons. Our solution streamlines this process, making it simple and efficient. Coupled with our Primary Pro grinder head, it creates a flush sealing surface on flat walls, saving time and resulting in an aesthetically pleasing finish.

MacDonald Plumbing Supplies FatMac Storage Case MACSNS

The MacDonald Plumbing Supplies FatMac Storage Case MACSNS is a durable and practical storage solution designed to keep tools, fittings and small parts organised. Featuring a Stac N Store design with 12 removable compartments, it allows users to customise storage to suit different items and job requirements. With compact dimensions of 425mm x 360mm x 105mm, it is ideal for both professional plumbers and DIY users who need reliable, portable storage for everyday use.

Trappex 2" Flowmatic Industrial Filter

The Trappex 2" Flowmatic Industrial Filter is designed to protect industrial heating and cooling systems by removing ferrous oxide, scale and other debris from circulating water. Featuring a durable stainless steel body and a powerful 12,000 gauss magnet, it captures magnetic particles to help protect critical system components and maintain efficient operation. The filter incorporates an automatic air vent to assist with deaeration, while its lidless design eliminates the need for a traditional lid seal. A built in drain point supports straightforward cleaning and maintenance, making this filter a practical solution for demanding commercial and industrial installations.

McAlpine BOSSCONN110Z-GR Black Mechanical Soil Pipe Boss Connector Grey 4" X 2"

The McAlpine BOSSCONN110Z-GR Black Mechanical Soil Pipe Boss Connector is a robust and reliable solution for connecting waste water or condensate discharge to 110mm soil pipe systems. Designed to fit a 57mm hole size, this mechanical boss connector enables fast, tool-free dry fixing. It’s compatible with both push-fit and solvent weld waste pipework, offering exceptional versatility. Supplied with a fixing tool, it ensures secure installation and long-term performance without the need for adhesives or sealants. A practical, regulation-compliant solution for soil system branching.

McAlpine VSG52SL-T6SQ-B Slimline Floor Gully For Sheet Flooring With Non-Return Valve Square 1½

The Shallowest McAlpine Gully available at only 59mm. Suitable for Tiled Flooring. The valve acts as a non-return valve, and the weight of the water discharge will open the valve then it will reseal when the discharge has ceased thus prohibiting foul air from entering the dwelling. Eliminates the release of foul air due to backflow.

McAlpine HC2650UK-MB Top Access Bath Trap With Removable Chrome Plated Clicker Waste Matt Black Finish 1½

50mm Water Seal 1½” Universal Compression Outlet suits all plastic, copper and lead pipes Outlet can be swivelled to make installation easier Mushroom Plug is spring loaded and top access for easy cleaning

Hotun SF Range Black 15 - 22 Dry Trap Tundish HBSF15-22

The revolutionary, market-leading, plumber-designed Hotun dry trap tundish allows a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Allowing both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline which makes it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. This means that diagnoses of any faults is quick and simple. Hotun fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge

Hotun SF Range White 15 - 22 Dry Trap Tundish HWSF15-22

The revolutionary, market-leading, plumber-designed Hotun dry trap tundish allows a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Allowing both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline which makes it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. This means that diagnoses of any faults is quick and simple. Hotun fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge

Hotun SF Range Hiflo Black 15 - 32 Dry Trap Tundish HHBSF15-32

From the manufacturer that brought you the revolutionary, market-leading, plumber-designed Hotun dry trap tundish, here is our latest innovation, the Hotun Hiflo sf push-fit dry trap tundish. Allowing a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Taking both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline making it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers and now, with its push-fit inlet connection, can be fitted in seconds. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. Making diagnoses of any faults quick and simple. Hotun Hiflo sf is WRAS approved and fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge.

Hotun SF Range Hiflo White 15 - 32 Dry Trap Tundish HHWSF15-32

From the manufacturer that brought you the revolutionary, market-leading, plumber-designed Hotun dry trap tundish, here is our latest innovation, the Hotun Hiflo sf push-fit dry trap tundish. Allowing a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Taking both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline making it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers and now, with its push-fit inlet connection, can be fitted in seconds. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. Making diagnoses of any faults quick and simple. Hotun Hiflo sf is WRAS approved and fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge.

Hotun SF Range XL 22 - 32 Dry Trap Tundish HXLSF22-32

From the manufacturer that brought you the revolutionary, market-leading, plumber-designed Hotun dry trap tundish, here is our latest innovation, the Hotun xl sf push-fit dry trap tundish. Allowing a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Taking both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline making it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers and now, with its push-fit inlet connection, can be fitted in seconds. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. Making diagnoses of any faults quick and simple. Hotun xl sf is WRAS approved and fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge.

Hotun White 15 - 22 Dry Trap Tundish HW100C15-22

The revolutionary, market-leading, plumber-designed hotun dry trap tundish allows a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Allowing both trickle and full flow but preventing foul odours and gases from coming back into a property, hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline which makes it ideal for use in hard water areas. Award-winning and cost effective, Hotun  is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. This means that diagnoses of any faults is quick and simple. Hotun is WRAS approved and fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge.

Hotun Hiflo Black 15 - 32 Dry Trap Tundish HHB100C15-32

The revolutionary, market-leading, plumber-designed Hotun dry trap tundish allows a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Allowing both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline which makes it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. This means that diagnoses of any faults is quick and simple. Hotun fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge

Hotun Hiflo White 15 - 32 Dry Trap Tundish HHW100C15-32

The revolutionary, market-leading, plumber-designed Hotun dry trap tundish allows a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Allowing both trickle and full flow but preventing foul odours and gases from coming back into a property, Hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, Hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline which makes it ideal for use in hard water areas. Award-winning and cost effective, Hotun is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. This means that diagnoses of any faults is quick and simple. Hotun fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge

Hotun Black 15 - 22 Dry Trap Tundish HB100C15-22

The revolutionary, market-leading, plumber-designed hotun dry trap tundish allows a compliant connection from any sealed system T/PRV to an internal waste or soil pipe. Allowing both trickle and full flow but preventing foul odours and gases from coming back into a property, hotun eliminates the need for an external discharge. Due to it's innovative and patented "air-break to drain" design, hotun is the ONLY dry trap tundish on the market that can be cleaned and serviced (if required) in situ. There is no need to remove or dismantle Hotun from the pipeline which makes it ideal for use in hard water areas. Award-winning and cost effective, Hotun  is the original and industry pioneering one-product solution. It saves the installer time and money and is the ONLY dry trap tundish officially named and accepted for use by many of the worlds biggest water heater and boiler manufacturers. Hotun is the ONLY dry trap tundish on the market that has a visible open-sided construction and valve arrangement and allows water to be easily seen IN the tundish, even AFTER the T/PRV has stopped dripping. This means that diagnoses of any faults is quick and simple. Hotun is WRAS approved and fully complies with all Building and Water Regulation requirements and provides the ultimate back-flow & back-siphonage protection preventing contamination of any wholesome water and meets the "Requirement" for a safe and visible means of discharge.

Regin 13mm (1/2) Brass Straight Hose Joiner (For Joining 2 X Drain-Down Hose Kits) REGR65

The 13mm (1/2") Brass straight hose joiner for the REGIN REGR09 Drain down hose.

Regin Gas & Water Jointing Compound - 250g REGM20

REGM20 - Gas & Water Jointing Compound  

Todays Tools Radiator Valve Change Kit RVCK

The Todays Tools Radiator Valve Change Kit RVCK is a practical solution for replacing radiator valves without the need to fully drain down the heating system. Designed for ease of use, this kit includes two universal bungs that create a reliable seal, helping to minimise water loss during maintenance work. Ideal for plumbers and heating engineers, it allows for quicker and cleaner valve changes, saving time on site. With a durable construction and enhanced grip, this kit ensures safer handling and dependable performance during every use.

Todays Tools Sealant Gun Long 400ml Cartridge CGL

The Todays Tools Sealant Gun Long 400ml Cartridge CGL is a heavy duty sealant applicator manufactured from high grade steel for reliable performance in demanding trade environments. Designed for use with 400ml cartridges, it is suitable for applying acrylics, silicones, MS polymers and adhesives. The robust trigger, flow cut-off function, quick release mechanism and U-shape ladder hook provide practical features for controlled application and convenient use on site.

MacDonald Plumbing Supplies MacPress Female Elbow 15mm x ½ - WATER

The MacPress Female Elbow 15mm x ½" is a WRAS approved copper press fitting designed for use in heating, hot water, and potable water systems. With a secure M-profile connection, it's the ideal choice for fast, leak-free installations in professional plumbing setups. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Coupling 15mm x ½ - WATER

The MacPress Male Coupling 15mm x ½ is a compact press fitting designed for seamless connection between copper pipe and ½" BSP threaded components. WRAS approved, it's suitable for use with potable water, heating, and hot water systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

Fernox Powerflow Flux 100g

It is designed specifically for the soldering of copper plumbing systems and is suitable for use with a range of metals/alloys. It contains no zinc chloride.

Fernox Powerflow Flux 350g

It is designed specifically for the soldering of copper plumbing systems and is suitable for use with a range of metals/alloys. It contains no zinc chloride.

McAlpine RS1 Macflash 18" X 18" For 4"/110mm Pipe

Manufactured in high grade aluminium with a die-formed synthetic rubber collar Quickly and easily installed offering cost saving in material and labour against traditional lead roof slates Suitable for flat roofs and roof pitches up to 45 degrees

MacDonald Plumbing Supplies Denso Protective Tape 50mm x 10Mtr

The Denso Protective Tape 50mm x 10Mtr is a highly durable self-adhesive tape designed to provide long-lasting waterproofing and corrosion protection for pipes, fittings, valves, and metal surfaces. Measuring 50mm wide and supplied on a 10-metre roll, it creates a reliable watertight and airtight barrier that helps extend the life of plumbing and industrial installations. Its flexible construction allows it to conform easily to irregular shapes, making it ideal for maintenance, repairs, and new installations.

Speedfit 22mm x 22mm x 10mm Reducing Tee PEM302210AW (Pack of 5)

The Speedfit 22mm x 22mm x 10mm Reducing Tee PEM302210AW is a versatile push-fit solution for connecting three pipes of unequal size in a T-junction. It allows easy branch-offs from larger diameter pipework to microbore systems. Thanks to the Twist & Lock® mechanism and Grip & Seal™ technology, it offers a secure, leak-free connection with fast installation and no need for hot works or tools. Designed for both plastic and copper pipes, this UK-made fitting is WRAS approved and backed by a 50-year guarantee.  

Speedfit 22mm x 22mm x 15mm Reducing Tee PEM3022AW (Pack of 5)

The Speedfit 22mm x 22mm x 15mm Reducing Tee PEM3022AW is designed for efficient pipe branching in plumbing systems. It connects two 22mm pipes with a 15mm centre outlet, making it ideal for reducing flow to smaller pipework. With its push-fit installation and Twist & Lock® mechanism, the fitting saves time on site and eliminates the need for tools or heat. WRAS approved and backed by a 50-year guarantee, this tee is compatible with copper and plastic pipes for hot and cold water systems.

Speedfit 15mm x 10mm Reducer PEM061510W (Pack of 10)

The Speedfit 15mm x 10mm Reducer PEM061510W is a push-fit fitting designed to connect two Speedfit fittings of unequal sizes, reducing the line size effectively and securely. The reducer features a reduced spigot end, making it ideal for joining 15mm and 10mm pipes. It is quick and easy to install and demount without tools, offering a simple solution for reducing pipe sizes without the need for hot works or additional tools. WRAS approved, this fitting is perfect for both hot and cold water systems. Designed and manufactured in the UK with a 50-year guarantee.  

Speedfit 22mm x 15mm Reducer PEM062215W (Pack of 10)

The Speedfit 22mm x 15mm Reducer PEM062215W is designed to quickly and securely reduce pipe sizes from 22mm to 15mm. This push-fit fitting offers an easy installation process, with no tools required for fitting or removal. The reduced spigot end connects unequal sized pipes, making it ideal for plumbing applications where size reduction is necessary. It is flame-free and requires no hot works, glue, or flux, offering up to 40% faster installation than traditional methods. WRAS approved and designed for both hot and cold water and central heating systems, this fitting is manufactured in the UK and comes with a 50-year guarantee.  

Speedfit 15mm x ½ Hose Connector NC448

The Speedfit 15mm x 1/2" Hose Connector NC448 provides a fast and secure push-fit connection between 15mm pipe and 1/2" hose threads. Ideal for plastic or copper pipework, this connector simplifies plumbing installations, especially in tight or awkward spaces, by removing the need for tools or hot works. Featuring a secure Grip & Seal™ collet and corrosion-resistant materials, it ensures a reliable connection every time.  

Speedfit 15mm Stop End PSE4615W (Pack of 10)

The Speedfit 15mm Stop End PSE4615W offers a simple and secure solution for capping off 15mm pipework in both temporary and permanent installations. This push-fit fitting can be easily installed and demounted without tools, making it perfect for situations where you need to pause work or perform pressure testing. It is WRAS approved for use with hot and cold water and central heating systems. Manufactured in the UK and backed by a 50-year guarantee.  

Speedfit 28mm Stop End PSE4628W (Pack of 5)

The Speedfit 28mm Stop End PSE4628W offers an efficient solution for capping off 28mm pipework at termination points, whether temporarily or permanently. This tool-free push-fit fitting allows for fast installation and removal, making it ideal for situations requiring water to be turned off temporarily or for pressure testing systems before appliances are connected. WRAS approved, it is compatible with hot and cold water systems and comes with a 50-year guarantee. Designed and manufactured in the UK.  

Speedfit 28mm Equal Elbow PEM0328W (Pack of 2)

The Speedfit 28mm Equal Elbow PEM0328W provides a secure and efficient way to connect two 28mm pipes at a 90° angle without tools or heat. Its Twist & Lock® technology ensures a strong, leak-resistant seal, and it’s up to 40% quicker to fit than traditional options. Designed for use with polybutylene and PEX pipe, this push-fit fitting is perfect for hot and cold water systems and central heating installations. Made in the UK with a 50-year guarantee for long-term reliability.  

Speedfit 15mm x ½ Straight Tap Connector PEMSTC1514 (Pack of 5)

The Speedfit 15mm x 1/2" Straight Tap Connector PEMSTC1514 provides a fast and secure connection for 15mm plastic or copper pipes to fixtures or appliances with a 1/2" MBSP connection. Complete with a brass swivel nut and sealing washer, this tap connector ensures a leak-proof fit and can be easily installed and demounted in seconds without the need for tools. This fitting is ideal for hot and cold water systems, as well as central heating systems. Its tool-free, flame-free installation is up to 40% faster than traditional methods.  

Speedfit 15mm x ¾ Straight Tap Connector PEMSTC1516 (Pack of 5)

The Speedfit 15mm x 3/4" Straight Tap Connector PEMSTC1516 provides a quick and secure connection for 15mm plastic or copper pipes to fixtures or appliances with a 3/4" MBSP connection. Complete with a brass swivel nut and sealing washer, this tap connector ensures a tight, leak-proof fit. The connector is designed for fast installation and demounting, requiring no tools and no hot works. Ideal for hot and cold water systems, as well as central heating systems, it’s up to 40% faster to install than traditional methods.  

Speedfit 10mm Stop End PSE4610W (Pack of 10)

The Speedfit 10mm Stop End PSE4610W provides a fast, secure solution for capping off 10mm pipework in both temporary and permanent installations. Its push-fit design allows for easy installation and removal without tools, making it ideal for situations where work needs to be paused or when pressure testing a system. The fitting is made to the highest standards in the UK and is WRAS approved for both hot and cold water and central heating systems. Backed by a 50-year guarantee.  

Speedfit 12mm x M10 x 300mm Braided Flexi Hose - Monobloc Mixers FLX48

The Speedfit 12mm x M10 x 300mm Braided Flexi Hose (FLX48) offers a compact and reliable solution for connecting 12mm pipe to M10 monobloc mixer taps. Featuring a push-fit connection and threaded M10 end with offset spanner flats, it enables fast, secure installation even in confined areas. The stainless steel braid adds durability, while WRAS approval ensures compliance with UK plumbing standards.  

Speedfit 15mm x M12 x 300mm Braided Flexi Hose - Monobloc Mixers FLX29

The Speedfit 15mm x M12 x 300mm Braided Flexi Hose (FLX29) offers a simple and effective way to connect 15mm pipework to M12 female-threaded monobloc mixer taps. With a push-fit connection and offset spanner flats, it is ideal for tight or awkward installations. The stainless steel braid adds strength, while the WRAS approval ensures reliability and safety for use with hot or cold water.  

PipeSnug FlueSnug 100mm Black PSFLUEBK

* Easy to install in seconds and fits a 152mm core-drilled hole. * Helps prevent heat loss and pest infestation around service penetrations. * Ensures compliance with new building regulations. * Long-lasting solution, won't crack or fall out over time. * Can be installed in any weather and is UV resistant. * Easier for post-installation service and maintenance.

PipeSnug FlueSnug 100mm White PSFLUEWH

* Easy to install in seconds and fits a 152mm core-drilled hole. * Helps prevent heat loss and pest infestation around service penetrations. * Ensures compliance with new building regulations. * Long-lasting solution, won't crack or fall out over time. * Can be installed in any weather and is UV resistant. * Easier for post-installation service and maintenance.

McAlpine MACTUN-1 Tundish With Self Closing Valve 15mm Inlet X 22mm Outlet

The McAlpine MACTUN-1 Tundish with Self Closing Valve is a unique solution, featuring a silicone membrane seal that remains unaffected by hard water. It prevents foul odours or sewer gas from entering the building when installed in a waste or soil pipe. With no spring mechanism, the membrane seal offers smooth discharge flow from the PRV/TRV. This maintenance-free product is KIWA Certified and WRAS approved, suitable for use on cylinders, boilers, water heaters, PRV valves, condensate, and air conditioning units.

McAlpine MACTUN-2 Tundish With Self Closing Valve 15/22mm Inlet X 1¼ Outlet

The McAlpine MACTUN-1 Tundish with Self Closing Valve is a unique solution, featuring a silicone membrane seal that remains unaffected by hard water. It prevents foul odours or sewer gas from entering the building when installed in a waste or soil pipe. With no spring mechanism, the membrane seal offers smooth discharge flow from the PRV/TRV. This maintenance-free product is KIWA Certified and WRAS approved, suitable for use on cylinders, boilers, water heaters, PRV valves, condensate, and air conditioning units.

McAlpine ST90CP10-NRV 90mm Shower Trap With Non-Return Valve

90mm Shower Trap with Non-Return Valve 90mm x Spring Loaded Non-Return Valve with 1½” Solvent Weld Outlet Socket Overall height 53mm The valve acts as a non-return valve. The weight of the water discharge will open the valve and it will reseal when the discharge has ceased thus prohibiting foul air from entering the dwelling.

McAlpine HC2650UK Top Access Bath Trap With Removable Chrome Plated Clicker Waste Chrome Finish 1½

50mm Water Seal Swivel Bath Trap and Overflow Assembly complete with top access Chrome Plated Brass Waste and Spring Loaded Mushroom Plug. This product is a perfect replacement as a whole assembly, with an outlet that can be swivelled for easy installation. It includes a spring-loaded mushroom plug and provides top access for easy cleaning. The overall height, including trap and waste, is only 112mm! The shallowest top access combined bath trap & waste on the market.

McAlpine WV-1 Space Saver With Self-closing Waste Valve 1½ X 1½

Bath Space-saver. 1½” BSP female inlet nut x 1½” universal compression outlet.

McAlpine WHB-1 Space Saver With Self-Closing Waste Valve 1¼ X 1¼

Wash Hand Basin Space-saver. 1¼” BSP female inlet nut x 1¼” universal compression outlet

McAlpine STW3-R 19mm Water Seal Shower Trap 70mm Chrome Plated Plastic

Suitable for shower trays with a 50mm waste hole 19mm Water Seal Suits 1 ½” Shower Waste Holes 1½” Universal Outlet

McAlpine E10 Shallow Bottle Trap For Use With Basins 1¼

1¼” Shallow Bottle Trap for use with Basins. The seals are secure, and because of the quality of the item, the threads on the collars bed easily with little likelihood of cross threadings.

McAlpine A10 Bottle Trap 1¼

75mm Water Seal Multifit Compression Outlet suits all plastic, copper and lead pipes

McAlpine ASA10 Adjustable Inlet Tubular Swivel 'p' Trap 1¼

The McAlpine ASA10 Adjustable Inlet Tubular Swivel ‘P’ Trap 1¼" is a versatile and easy-to-install waste trap designed to prevent unpleasant sink odours. Featuring a 75mm water seal and adjustable inlet, it is ideal for a wide range of domestic plumbing applications. With a Multifit outlet compatible with plastic, copper, and lead pipes, it provides a reliable and flexible installation solution.

MacDonald Plumbing Supplies Straight Auto Bypass Valve 22mm

The Straight Auto Bypass Valve 22mm is designed to automatically regulate water flow within central heating systems, maintaining consistent pressure and preventing pump damage. By diverting excess flow when thermostatic radiator valves (TRVs) close, it enhances efficiency and ensures quiet, reliable system operation. With 22mm compression connections, it’s easy to install and suitable for domestic and light commercial systems. An essential component for modern heating systems using TRVs across multiple radiators.

MacDonald Plumbing Supplies Chrome Plated Angled Service Valve - 15mm x 1/2"

Enhance your plumbing system with our Chrome Plated Angled Service Valve. This valve is specifically designed for efficient water control and offers a reliable solution for various plumbing applications.