Regin Leak Detection Fluid Large 1 Litre Refill REGL12

The Regin Leak Detection Fluid Large 1 Litre Refill REGL12 is a convenient 1000ml refill bottle of leak detection fluid for plumbing, heating and gas installation work. It is ideal for topping up the Regin Leak Shot bottle, helping tradespeople keep their leak detection equipment ready for use without needing to replace the complete bottle. The same quality leak detection fluid is used throughout Regin's leak detection formula range, making this a practical choice for professional engineers carrying out routine leak checks and maintenance.

Pumphouse High Temperature Condensate Pump

The Pumphouse High Temperature Condensate Pump is designed for applications where condensate needs to be removed from high temperature heating and cooling equipment. Also known as the Pump House PH-3.8L-HW, this condensate pump provides a practical solution where gravity drainage is not suitable or available. Its high temperature design makes it suitable for applications producing hotter condensate, providing plumbers, heating engineers and installers with a convenient option for managing condensate discharge. It is a useful addition to professional heating and HVAC installations where reliable condensate removal is required.

MacDonald Plumbing Supplies DZR Brass Double Check Valve 35mm

The DZR Brass Double Check Valve 35mm is a practical plumbing fitting designed to help prevent reverse flow within compatible water supply systems. Manufactured from dezincification resistant brass, it is designed to provide reliable performance in plumbing installations where resistance to dezincification is important. The 35mm size makes it suitable for compatible larger pipework applications. A useful choice for plumbers and installers, this double check valve is suitable for a range of domestic, commercial and maintenance plumbing projects where backflow protection is required.

MacDonald Plumbing Supplies MacShower Thermostatic Bar Shower Valve & Kit 3 Function Chrome

The MacShower Thermostatic Bar Shower Valve & Kit 3 Function Chrome provides a practical shower solution combining thermostatic temperature control with a versatile three function shower kit. The thermostatic valve is designed to help maintain a consistent water temperature during use, while the chrome finish provides a clean and contemporary appearance. The three function shower kit offers flexibility for different showering preferences, making this a useful option for bathroom installations, refurbishments and upgrades. Suitable for plumbers, bathroom installers and professional maintenance teams.

MacDonald Plumbing Supplies MacShower Square Shroud Shower Fixing Kit

The MacShower Square Shroud Shower Fixing Kit is a practical solution for creating a neat and professional finish around shower connection points. Featuring square chrome shrouds, the kit is designed to conceal the connection area where the shower fittings meet the wall, helping achieve a clean and modern appearance. The chrome finish complements contemporary bathroom fittings, while the compact design provides a tidy finish around the installation. Supplied as a pair, the kit is suitable for shower installations requiring two fixing points and provides plumbers and bathroom installers with a straightforward way to complete the visible connection points.

Trappex Pipe Lagging Cutter Set

The Trappex Pipe Lagging Cutter Set is designed to make cutting clean and accurate cut outs in pipe lagging quick and straightforward. Covering five common pipe sizes, the set provides a practical solution for plumbers and heating engineers working with pipe insulation. The dedicated cutters help create neat openings around pipes and fittings, making installation and finishing work easier. Supplied as a convenient set with easy storage, the cutters can be kept together and readily available in a toolbox or on the job.

Trappex Heat Exchanger Protector

The Trappex Heat Exchanger Protector is designed to help protect the heat exchanger while carrying out maintenance work. Providing a practical protective barrier during servicing, it can help reduce the risk of unwanted contact with surrounding areas while engineers work on the heat exchanger. A useful addition to a heating engineer's toolkit, the protector is intended to make maintenance work more convenient and controlled. It is suitable for plumbers, heating engineers and service professionals carrying out routine maintenance and repair work on heating appliances.

MacDonald Plumbing Supplies Refill For The MacPack Endfeed Starter Pack

The Refill For The MacPack Endfeed Starter Pack provides a complete replacement selection of high-quality WRAS approved endfeed fittings from MacDonald Plumbing Supplies. Containing 255 popular 15mm and 22mm fittings, including couplings, 90 degree elbows, equal tees, reducing tees and reducers, this refill pack is designed to replenish your existing MacPack storage case without purchasing another case. Ideal for plumbers and heating engineers who regularly use endfeed fittings on professional installations. Pack Contents 50 x MacEndfeed Coupling 15mm WRAS Approved 25 x MacEndfeed Coupling 22mm WRAS Approved 50 x MacEndfeed 90 Degree Elbow 15mm WRAS Approved 50 x MacEndfeed 90 Degree Elbow 22mm WRAS Approved 25 x MacEndfeed Equal Tee 15mm WRAS Approved 20 x MacEndfeed Equal Tee 22mm WRAS Approved 10 x MacEndfeed Reducing Tee 22mm x 22mm x 15mm WRAS Approved 25 x MacEndfeed Fitting Reducer 22mm x 15mm WRAS Approved

MacDonald Plumbing Supplies MacPack Solder Ring Starter Pack

The MacPack Solder Ring Starter Pack provides a comprehensive selection of high-quality WRAS approved solder ring fittings from MacDonald Plumbing Supplies. Supplied in a practical FatMac storage case, the pack contains popular 15mm and 22mm couplings, elbows, equal tees, reducing tees and reducers, making it ideal for a wide range of plumbing installations. The compact design of the solder ring fittings makes them particularly useful when working in areas where space is limited. Pack Contents 1 x FatMac Storage Case 50 x MacSolder Ring Coupling 15mm WRAS Approved 25 x MacSolder Ring Coupling 22mm WRAS Approved 50 x MacSolder Ring 90 Degree Elbow 15mm WRAS Approved 50 x MacSolder Ring 90 Degree Elbow 22mm WRAS Approved 25 x MacSolder Ring Equal Tee 15mm WRAS Approved 20 x MacSolder Ring Equal Tee 22mm WRAS Approved 10 x MacSolder Ring Reducing Tee 22mm x 22mm x 15mm WRAS Approved 25 x MacSolder Ring Fitting Reducer 22mm x 15mm WRAS Approved

Todays Tools Pit Bull Rapid Vac PBRV

The Todays Tools Pit Bull Rapid Vac PBRV is a powerful and practical 20 litre vacuum cleaner designed for professional trade use. With a 1200W motor, extra-long hose and a generous 5 metre power cable, it provides excellent reach when working around workshops, sites and installations. Fitted with durable metal clips and designed for reliable everyday use, the Pit Bull Rapid Vac offers strong cleaning performance without the need for an oversized motor.

Trappex 28mm Filter Ball Valve

The Trappex 28mm Filter Ball Valve combines reliable isolation with integrated filtration, providing a practical solution for controlling and protecting plumbing and heating systems. The ball valve allows the water supply to be quickly isolated when servicing or maintaining equipment, while the integrated filter helps capture debris and unwanted particles within the system. Designed for professional installation, it is a useful addition to domestic and commercial plumbing and heating applications.

MacDonald Plumbing Supplies Brass Olive 3/4 Imperial

The Brass Olive 3/4" Imperial is a durable compression fitting component designed to create a secure and reliable seal when used with compatible imperial pipework and compression fittings. Manufactured from brass for strength and long-term performance, it is ideal for plumbing, heating, maintenance, and repair applications. A practical replacement component for professional tradespeople, it provides dependable compression connections when installing or servicing pipework.

Fernco Plumbqwik PVC Flexible Adaptor 101-112mm

The Fernco Plumbqwik PVC Flexible Adaptor 101-112mm is a high-quality flexible drainage coupling designed to join two plain-ended pipes with the same or similar outside diameters. Providing a permanent watertight and airtight seal in seconds, it offers a fast, reliable solution for pipe repairs, alterations, and private drainage installations. Easy to install using standard hand tools, it is ideal for professional contractors and DIY users alike.

Todays Tools Pit Bull PipeShine Replacement Pads PBPSP

The Todays Tools Pit Bull PipeShine Replacement Pads PBPSP are genuine replacement cleaning pads designed for use with the Todays Tools Pit Bull PipeShine Set PBPS. Supplied in a convenient pack of five, these durable pads help maintain the cleaning and polishing performance of your PipeShine tool, ensuring consistently smooth and professional pipe preparation on every job.

Todays Tools Pit Bull PipeShine Set PBPS

The Todays Tools Pit Bull PipeShine Set PBPS is a fast and effective pipe cleaning and polishing accessory designed to give copper pipework a clean, professional finish. Suitable for use with most oscillating multi-tools thanks to its universal shank, it smooths and prepares pipe surfaces quickly while reducing manual effort. Supplied with five replacement brushes, it is the ideal solution for plumbers looking to improve surface preparation and achieve a high-quality finish on every installation.

MacDonald Plumbing Supplies MacPress R-Press Jaw 3/4"

The MacPress R-Press Jaw 3/4" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

MacDonald Plumbing Supplies MacPress R-Press Jaw 7/8"

The MacPress R-Press Jaw 7/8" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

MacDonald Plumbing Supplies MacPress R-Press Jaw 1 1/8"

The MacPress R-Press Jaw 1 1/8" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

MacDonald Plumbing Supplies MacPress R-Press Jaw 3/8"

The MacPress R-Press Jaw 3/8" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

MacDonald Plumbing Supplies MacPress R-Press Jaw 1/2"

The MacPress R-Press Jaw 1/2" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

MacDonald Plumbing Supplies MacPress R-Press Jaw 5/8"

The MacPress R-Press Jaw 5/8" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

MacDonald Plumbing Supplies MacPress R-Press Jaw 1/4"

The MacPress R-Press Jaw 1/4" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

Todays Tools PZ2 x 25mm Impact S/D Bits Candy Box 10 Pk SLSCB

The Todays Tools PZ2 x 25mm Impact S/D Bits Candy Box 10 Pk SLSCB provides a durable and reliable solution for high-performance screwdriving tasks. Manufactured from hardened S2 steel, these bits deliver excellent strength, torsional resistance and long service life, even under continuous impact use. The handy candy box case keeps all 10 bits secure and organised, while the inclusion of 2 magnetic collars ensures improved stability, easier engagement and reduced cam-out. This compact set is ideal for trade professionals and DIY users needing consistent PZ2 performance in demanding applications.

Instantor R-Press Jaw 3/8"

The Instantor R-Press Jaw 3/8" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

Instantor R-Press Jaw 1/2"

The Instantor R-Press Jaw 1/2" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

Instantor R-Press Jaw 5/8"

The Instantor R-Press Jaw 5/8" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

Instantor R-Press Jaw 3/4"

The Instantor R-Press Jaw 3/4" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

Instantor R-Press Jaw 7/8"

The Instantor R-Press Jaw 7/8" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

Instantor R-Press Jaw 1 1/8"

The Instantor R-Press Jaw 1 1/8" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

Instantor R-Press Jaw 1/4"

The Instantor R-Press Jaw 1/4" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

Todays Tools Pit Bull Metal Cutting Discs (Pack of 10) 115mm PBMCD

The Todays Tools Pit Bull Metal Cutting Discs 115mm Pack of 10 PBMCD are high-performance cutting discs engineered for fast, accurate cutting of metal materials. Delivering razor-sharp precision, extreme cutting speed, and optimum performance, these professional-grade 115mm discs are ideal for cutting pipe, sheet metal, and other ferrous metal components. Supplied in a convenient pack of 10, they provide outstanding durability and value for everyday trade use.

Todays Tools Pit Bull Multi Material Cutting Discs 115mm (Pack of 10) PBCDMM

The Todays Tools Pit Bull Multi Material Cutting Discs 115mm Pack of 10 PBCDMM are high-performance cutting discs designed to tackle a wide range of materials using a single disc. Offering extra-long service life and fast, clean cutting performance, they are suitable for metal, aluminium, stainless steel, plastic, PVC, and masonry. Supplied in a convenient pack of 10, they provide the versatility, reliability, and value professional tradespeople need for a wide variety of cutting applications.

MacDonald Plumbing Supplies Dosing Funnel

The MacDonald Plumbing Supplies Dosing Funnel provides a fast, clean, and convenient method of introducing inhibitors, sludge removers, and other heating system treatment chemicals into a central heating system via a radiator. Supplied with a ½" BSP adaptor, it connects directly to the radiator, allowing chemicals to be poured into the system with minimal mess. It is an essential tool for heating engineers carrying out routine servicing and system maintenance.

MacDonald Plumbing Supplies MacPress Straight Jaws Case

The MacPress Straight Jaws Case is a durable storage solution designed to safely store and transport MacPress straight press jaws. Manufactured to fit all MacPress straight jaws, it helps keep your equipment organised, protected, and readily accessible on site or in the workshop. Ideal for professional installers, this robust case protects valuable press jaws from damage, dirt, and moisture during transport and storage.

Todays Tools Compression Nut Spanner 15mm/22mm CNS

The Todays Tools Compression Nut Spanner 15mm/22mm CNS is a purpose-designed plumbing tool for tightening and loosening 15mm and 22mm compression nuts with ease. Manufactured for durability and everyday professional use, its dual-size design eliminates the need for multiple spanners, making it an essential addition to any plumber's toolkit. Ideal for installation, servicing, and maintenance work, it provides excellent grip while helping to minimise damage to compression fittings

Todays Tools PlumbThumb PTHUMB

The Todays Tools Plumb Thumb PTHUMB is a practical pipe isolation tool designed to simplify plumbing maintenance without the need to drain the entire system. Featuring a convenient double-ended design, it allows plumbers to temporarily isolate pipework quickly and cleanly, reducing downtime and mess. Manufactured from durable materials for repeated professional use, the Plumb Thumb is an essential addition to any plumber's toolkit.

Todays Tools Kneeling Mat PBKM

The Todays Tools Kneeling Mat PBKM is a durable and comfortable kneeling mat designed to provide superior cushioning and support during installation, maintenance, and repair work. Manufactured from 30mm thick 100% NBR foam rubber, it helps reduce pressure on knees while working on hard surfaces. Featuring a lightweight design, anti-slip surface, and wipe-clean finish, it is suitable for both indoor and outdoor use, making it an essential accessory for professional tradespeople.

Todays Tools Slice Mate PBSM

The Todays Tools Slice Mate PBSM is a practical pipe cutting accessory designed to make cutting copper pipe easier in confined spaces. Developed for use with 15mm, 22mm, and 28mm Pit Bull Quick-Cut Tube Cutters, it improves control and accessibility where conventional cutting methods can be difficult. Compact, simple to use, and built for professional applications, the Slice Mate helps plumbers complete pipe cutting tasks quickly and efficiently.

Regin Rapid DigiDial Pressure Checker REGX11

The Regin Rapid DigiDial Pressure Checker REGX11 is a compact and easy-to-use digital pressure testing tool designed for quickly checking water pressure in domestic and commercial plumbing systems. Featuring a clear digital display and simple operation, it provides fast, accurate pressure readings, making it an essential diagnostic tool for plumbers, heating engineers, and maintenance professionals. Its portable design allows convenient use on-site for routine servicing, fault finding, and system commissioning.

NovoPress ACO203XL Adaptor Jaws ZB211 (For 67mm, 76mm, & 1st Press of 108mm)

The Novopress ACO203XL Adaptor Jaw ZB221 is a specialist pressing accessory designed to enable the use of large diameter M profile press jaws with Novopress ACO203XL press tools. Supporting pipe sizes from approximately 64mm to 108mm, it is essential for heavy-duty commercial and industrial pipe installations. Built for durability and precision, it ensures stable force transfer for consistent and reliable press connections on large bore systems.

Novopress M108 Profile Jaw 108mm Sling 203XL ZB221 *** Adpt Required ***

The Novopress M108 PB2 Profile Jaw Sling 108mm ZB221 (Adaptor Required) is a heavy-duty pressing sling designed for secure and accurate press connections on 108mm M profile fittings. Developed for use with the Novopress ACO203XL press system, it delivers dependable performance for large diameter pipe installations. An appropriate adaptor is required, making it suitable for specialist commercial and industrial applications where maximum pipe sizes are required.

Novopress M76 Profile Jaw 76mm Sling 203XL ZB221 *** Adpt Required ***

The Novopress M76 PB2 Profile Jaw Sling 76mm ZB221 (Adaptor Required) is a professional-grade pressing sling designed for secure and accurate press connections on 76mm M profile fittings. Engineered for use with the Novopress ACO203XL press system, it delivers consistent performance and reliable jointing for large diameter installations. An appropriate adaptor is required, making it suitable for specialist commercial and industrial pipework applications.

NovoPress M67 Profile Jaw 67mm Sling 203XL ZB221 *** Adpt Required ***

The NovoPress M67 Profile Jaw 67mm Sling 203XL ZB221 (Adaptor Required) is a professional pressing sling designed for creating secure and consistent press connections on 67mm M profile press fittings. Engineered for use with the Novopress ACO203XL system, this high-quality sling delivers precise force distribution for reliable installations. An appropriate adaptor is required for operation, making it an essential accessory for installers working on larger diameter press systems.

Novopress ACO203XL Tool Novopress ACO203XL Tool C/W Case (2 x 2Ah Bat & Charger & M15, M22, M28, & M35 Jaws)

The Novopress ACO203XL Tool C/W Case (2 x 2Ah Batteries, Charger & M15, M22, M28 & M35 Jaws) is a professional-grade pressing tool kit engineered for fast, efficient, and reliable pipe installation. Capable of pressing metal systems from 12mm to 108mm and plastic systems from 14mm to 110mm, it combines exceptional versatility with a lightweight design of just 3.9kg including the battery. Supplied complete with two 2Ah batteries, charger, M profile jaws, and a durable carry case, it is the ideal solution for professional plumbing and heating engineers.

MacDonald Plumbing Supplies MacGlue 250ml Solvent Cement

The MacGlue 250ml Solvent Cement is a high-quality PVC solvent cement designed to create strong, permanent joints in compatible PVC pipe and fittings. Supplied in a convenient 250ml container, it provides a reliable bond for plumbing and drainage applications, ensuring secure and leak-resistant installations. Suitable for both professional plumbers and DIY users, it offers quick and easy application for new installations, repairs, and maintenance work.

FRANKISCHE MLCP Alpex Individual Deburrer 32mm 79032250

The FRANKISCHE MLCP Alpex Individual Deburrer 32mm 79032250 is a specialist pipe preparation tool designed for deburring 32mm FRANKISCHE Alpex multilayer composite pipe. By removing internal and external burrs created during pipe cutting, it helps ensure smooth pipe ends and reliable fitting connections. Compact, durable, and easy to use, this tool is an essential addition to any professional installer's toolkit.

FRANKISCHE MLCP Alpex Individual Deburrer 26mm 79026250

The FRANKISCHE MLCP Alpex Individual Deburrer 26mm 79026250 is a specialist pipe preparation tool designed for deburring 26mm FRANKISCHE Alpex multilayer composite pipe. By removing internal and external burrs created during pipe cutting, it helps ensure smooth pipe ends and reliable fitting connections. Compact, durable, and easy to use, this tool is an essential addition to any professional installer's toolkit.

FRANKISCHE MLCP Alpex Individual Deburrer 20mm 79020250

The FRANKISCHE MLCP Alpex Individual Deburrer 20mm 79020250 is a specialist pipe preparation tool designed for deburring 20mm FRANKISCHE Alpex multilayer composite pipe. By removing internal and external burrs created during pipe cutting, it helps ensure smooth pipe ends and reliable fitting connections. Compact, durable, and easy to use, this tool is an essential addition to any professional installer's toolkit.

FRANKISCHE MLCP Alpex Individual Deburrer 16mm 79016250

The FRANKISCHE MLCP Alpex Individual Deburrer 16mm 79016250 is a specialist pipe preparation tool designed for deburring 16mm FRANKISCHE Alpex multilayer composite pipe. By removing internal and external burrs created during pipe cutting, it helps ensure smooth pipe ends and reliable fitting connections. Compact, durable, and easy to use, this tool is an essential addition to any professional installer's toolkit.

FRANKISCHE MLCP Alpex Inside/Outside Deburring Set 79002250

The FRANKISCHE MLCP Alpex Inside/Outside Deburring Set is an essential installation tool designed to prepare multilayer composite pipe (MLCP) quickly and accurately before fitting. Suitable for deburring both the internal and external edges of cut pipe, this tool helps create clean, smooth pipe ends for reliable and professional installations. Ideal for use with FRANKISCHE Alpex pipe systems, it supports efficient installation while helping to protect fittings and seals from damage during assembly.

MacDonald Plumbing Supplies Basin Waste Seal Kit

The Basin Waste Seal Kit is a practical 3-part sealing solution designed for 1¼" basin wastes. It provides a secure and reliable seal without the need for silicone, putty, or mastic. Manufactured from approved black rubber material, it ensures long-lasting performance and a clean, professional finish.

McAlpine ST90MEBBTOP+SUPP Shower Trap Cover and Support Brushed Brass

The McAlpine ST90MEBBTOP+SUPP Shower Trap Cover and Support Brushed Brass is a high-quality replacement cover and support designed for compatible McAlpine shower traps. Finished in brushed brass, it provides a premium modern look while ensuring reliable performance and easy maintenance within shower drainage systems.

McAlpine CWP60-CB-GM 1 1/4 x 60mm Multi-Function Centre-Pin Basin Waste Gun-Metal

The McAlpine CWP60-CB-GM 1¼" x 60mm Multi-Function Centre-Pin Basin Waste Gun-Metal is a premium basin waste designed for modern bathroom installations. Featuring a stylish gun metal finish and spring loaded mushroom plug, it provides reliable drainage performance while helping to prevent odours and gases escaping from the waste system. Suitable for basins with or without overflow connections.

McAlpine ST90BB10-FLX Brushed Brass 3 Pin Shower Trap & Flex Adaptor

The McAlpine ST90BB10-FLX Brushed Brass 3 Pin Shower Trap & Flex Adaptor is a high-quality shower waste solution designed for efficient drainage and flexible installation. Featuring a stylish brushed brass finish, 50mm water seal, and flexible connector, this shower trap is ideal for modern bathroom installations where both appearance and practicality are important.

McAlpine ST90MEMBMTOP+SUPP Brass Shower Trap Cover and Support Matt Black

The McAlpine ST90MEMBMTOP+SUPP Brass Shower Trap Cover and Support Matt Black is a premium replacement shower trap cover and support designed for use with compatible McAlpine shower traps. Featuring a stylish matt black finish and durable brass construction, it provides both reliable performance and a modern aesthetic for contemporary bathroom installations.

McAlpine BLKIT-1 Blanking Off Kit for Domestic Appliances

The McAlpine BLKIT-1 Blanking Off Kit for Domestic Appliances is a practical solution for sealing unused appliance waste connections safely and securely. Designed for compatibility with McAlpine fittings, this kit contains the components required to blank off ¾", 1", and 1½" fittings, helping prevent leaks, odours, and debris ingress while maintaining a clean and professional plumbing installation.

Salus Controls Salus UG800 Universal Gateway

The Salus UG800 Universal Gateway is a powerful smart home hub designed to connect and control up to 200 ZigBee wireless devices from a single gateway. Supporting both WiFi and Ethernet connections, it provides flexible installation options and seamless cloud integration for reliable smart home management. Ideal for modern connected heating and automation systems.

MacDonald Plumbing Supplies MacWaste Spigot 90 Degree 40mm White

The MacWaste Spigot 90 Degree 40mm White is a durable waste pipe fitting designed to create a sharp 90° directional change in 40mm waste systems using a spigot connection. Manufactured from strong plastic with a clean white finish, it provides a secure and reliable joint suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste Spigot 45 Degree 40mm Black

The MacWaste Spigot 45 Degree 40mm Black is a durable waste pipe fitting designed to provide a smooth 45° directional change in 40mm waste systems using a spigot connection. Manufactured from strong plastic with a black finish, it offers a secure and reliable joint suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste Spigot 45 Degree 40mm White

The MacWaste Spigot 45 Degree 40mm White is a durable waste pipe fitting designed to provide a smooth 45° directional change in 40mm waste systems using a spigot connection. Manufactured from strong plastic with a clean white finish, it offers a secure and reliable joint suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste Reducer 40mm - 32mm Black

The MacWaste Reducer 40mm - 32mm Black is a durable waste pipe fitting designed to reduce pipe size from 40mm to 32mm within waste systems. Manufactured from strong plastic with a black finish, it provides a secure and reliable connection suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste Reducer 40mm - 32mm White

The MacWaste Reducer 40mm - 32mm White is a durable waste pipe fitting designed to reduce pipe size from 40mm to 32mm within waste systems. Manufactured from strong plastic with a clean white finish, it provides a secure and reliable connection suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste Reducer 50mm - 32mm Black

The MacWaste Reducer 50mm - 32mm Black is a durable waste pipe fitting designed to reduce pipe size from 50mm to 32mm within waste systems. Manufactured from strong plastic with a black finish, it provides a secure and reliable connection suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste Reducer 50mm - 32mm White

The MacWaste Reducer 50mm - 32mm White is a durable waste pipe fitting designed to reduce pipe size from 50mm to 32mm within waste systems. Manufactured from strong plastic with a clean white finish, it provides a secure and reliable connection suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste Reducer 50mm - 40mm Black

  The MacWaste Reducer 50mm - 40mm Black is a durable waste pipe fitting designed to reduce pipe size from 50mm to 40mm within waste systems. Manufactured from strong plastic with a black finish, it provides a secure and reliable connection suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste Reducer 50mm - 40mm White

The MacWaste Reducer 50mm - 40mm White is a durable waste pipe fitting designed to reduce pipe size from 50mm to 40mm within waste systems. Manufactured from strong plastic with a clean white finish, it provides a secure and reliable connection suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste 50mm Coupler Black

The MacWaste 50mm Coupler Black is a durable waste pipe fitting designed to join two lengths of 50mm waste pipe in a straight run. Manufactured from robust plastic with a black finish, it provides a secure and reliable connection for domestic and commercial waste pipe installations, repairs, and extensions.

MacDonald Plumbing Supplies MacWaste 50mm Coupler White

The MacWaste 50mm Coupler White is a durable and reliable waste pipe fitting designed to join two lengths of 50mm waste pipe in a straight run. Manufactured from strong plastic with a clean white finish, it provides a secure and leak-resistant connection for domestic and commercial plumbing installations, repairs, and extensions.

MacDonald Plumbing Supplies MacWaste 90 Degree Bend 50mm Black

The MacWaste 90 Degree Bend 50mm Black is a durable waste pipe fitting designed to change the direction of 50mm waste pipe runs at a 90° angle. Manufactured from strong plastic with a black finish, it provides a secure and reliable connection suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste 90 Degree Bend 50mm White

The MacWaste 90 Degree Bend 50mm White is a durable waste pipe fitting designed to change the direction of 50mm waste pipe runs at a 90° angle. Manufactured from strong plastic with a clean white finish, it provides a secure and reliable connection suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste 50mm 92.5 Degree Swept Black

The MacWaste 50mm 92.5° Swept Bend Black is a durable waste pipe fitting designed to provide a smooth and efficient directional change in 50mm waste pipe systems. Manufactured from strong plastic with a black finish, it supports improved flow performance and a secure, reliable connection.

MacDonald Plumbing Supplies MacWaste 50mm 92.5 Degree Swept White

The MacWaste 50mm 92.5° Swept Bend White is a durable waste pipe fitting designed to provide a smooth and efficient directional change in 50mm waste pipe systems. Manufactured from strong plastic with a clean white finish, it improves flow performance while ensuring a secure and reliable connection.

MacDonald Plumbing Supplies MacWaste 50mm 45 Degree Bend Black

The MacWaste 50mm 45 Degree Bend Black is a durable waste pipe fitting designed to change the direction of 50mm waste pipe runs at a 45° angle. Manufactured from robust plastic with a black finish, it provides a secure and reliable connection suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste 50mm 45 Degree Bend White

The MacWaste 50mm 45 Degree Bend White is a durable waste pipe fitting designed to change the direction of 50mm waste pipe runs at a 45° angle. Manufactured from strong plastic with a clean white finish, it provides a secure and reliable connection suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste 50mm Tee Black

The MacWaste 50mm Tee Black is a durable waste pipe fitting designed to create a branch connection within 50mm waste pipe systems. Manufactured from strong plastic with a black finish, it provides a secure and reliable joint suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste 50mm Tee White

The MacWaste 50mm Tee White is a durable waste pipe fitting designed to create a branch connection within 50mm waste pipe systems. Manufactured from strong plastic with a clean white finish, it provides a secure and reliable joint suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste 50mm Spigot 90 Degree Black

The MacWaste 50mm Spigot 90 Degree Black is a durable waste pipe fitting designed to create a sharp 90° directional change in 50mm waste systems using a spigot connection. Manufactured from strong plastic with a black finish, it provides a secure and reliable joint suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste 50mm Spigot 90 Degree White

The MacWaste 50mm Spigot 90 Degree White is a durable waste pipe fitting designed to create a sharp 90° directional change in 50mm waste systems using a spigot connection. Manufactured from strong plastic with a clean white finish, it provides a secure and reliable joint suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste Access Plug 50mm Black

The MacWaste Access Plug 50mm Black is a durable waste pipe fitting designed to provide easy access into 50mm waste systems for inspection, maintenance, or clearing blockages. Manufactured from strong plastic with a black finish, it offers a secure and reliable sealing solution suitable for domestic and commercial installations.

MacDonald Plumbing Supplies MacWaste Access Plug 50mm White

The MacWaste Access Plug 50mm White is a durable waste pipe fitting designed to provide easy access into 50mm waste systems for inspection, maintenance, or clearing blockages. Manufactured from strong plastic with a clean white finish, it offers a secure and reliable sealing solution suitable for domestic and commercial installations.

MacDonald Plumbing Supplies MacWaste 50mm Clip Black

The MacWaste 50mm Clip Black is a strong and reliable pipe support clip designed for 50mm waste pipe installations. Manufactured from durable plastic and finished in black, it provides secure pipe retention, helping maintain correct alignment and a professional appearance in both domestic and commercial plumbing systems.

MacDonald Plumbing Supplies MacWaste 50mm Clip White

The MacWaste 50mm Clip White is a durable and reliable pipe support clip designed for 50mm waste pipe systems. Manufactured from strong plastic with a clean white finish, it provides secure pipe retention while ensuring a neat and professional appearance in domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste 90 Degree Bend 32mm White

The MacWaste 90 Degree Bend 32mm White is a durable waste pipe fitting designed to change the direction of 32mm waste pipe runs at a 90° angle. Manufactured from strong plastic with a clean white finish, it provides a secure and reliable connection suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste 92.5 Swept 32mm Black

The MacWaste 92.5° Swept Bend 32mm Black is a durable waste pipe fitting designed to provide a smooth directional change in 32mm waste pipe systems. Manufactured from strong plastic with a black finish, it helps maintain efficient flow while ensuring a secure and reliable connection.

MacDonald Plumbing Supplies MacWaste 92.5 Swept 32mm White

The MacWaste 92.5° Swept Bend 32mm White is a durable waste pipe fitting designed to provide a smooth and efficient directional change in 32mm waste pipe systems. Manufactured from strong plastic with a clean white finish, it improves flow performance while ensuring a secure and reliable connection.

MacDonald Plumbing Supplies MacWaste 45 Degree Bend 32mm Black

The MacWaste 45 Degree Bend 32mm Black is a durable waste pipe fitting designed to change the direction of 32mm waste pipe runs at a 45° angle. Manufactured from robust plastic with a black finish, it provides a secure, reliable connection suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste 45 Degree Bend 32mm White

The MacWaste 45 Degree Bend 32mm White is a durable waste pipe fitting designed to change the direction of 32mm waste pipe runs at a 45° angle. Manufactured from strong plastic with a clean white finish, it provides a secure and reliable connection suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste Tee 32mm Black

The MacWaste Tee 32mm Black is a durable waste pipe fitting designed to create a branch connection within 32mm waste pipe systems. Manufactured from strong plastic with a black finish, it provides a secure and reliable joint suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste Tee 32mm White

The MacWaste Tee 32mm White is a durable waste pipe fitting designed to create a branch connection within 32mm waste pipe systems. Manufactured from strong plastic with a clean white finish, it provides a secure and reliable joint suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste Access Plug 32mm Black

The MacWaste Access Plug 32mm Black is a durable waste pipe fitting designed to provide easy access into 32mm waste systems for inspection, maintenance, or clearing blockages. Manufactured from strong plastic with a black finish, it offers a secure and reliable sealing solution suitable for domestic and commercial installations.

MacDonald Plumbing Supplies MacWaste Access Plug 32mm White

The MacWaste Access Plug 32mm White is a durable waste pipe fitting designed to provide easy access into 32mm waste systems for inspection, maintenance, or clearing blockages. Manufactured from strong plastic with a clean white finish, it offers a secure and reliable sealing solution suitable for domestic and commercial installations.

MacDonald Plumbing Supplies MacWaste Spigot 90 Degree 32mm Black

The MacWaste Spigot 90 Degree 32mm Black is a durable waste pipe fitting designed to create a sharp 90° directional change in 32mm waste systems using a spigot connection. Manufactured from strong plastic with a black finish, it provides a secure and reliable joint suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste Spigot 90 Degree 32mm White

The MacWaste Spigot 90 Degree 32mm White is a durable waste pipe fitting designed to create a sharp 90° directional change in 32mm waste systems using a spigot connection. Manufactured from strong plastic with a clean white finish, it provides a secure and reliable joint suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste Spigot 45 Degree 32mm Black

The MacWaste Spigot 45 Degree 32mm Black is a durable waste pipe fitting designed to provide a smooth 45° directional change in 32mm waste systems using a spigot connection. Manufactured from strong plastic with a black finish, it offers a secure and reliable joint suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste Spigot 45 Degree 32mm White

The MacWaste Spigot 45 Degree 32mm White is a durable waste pipe fitting designed to provide a smooth 45° directional change in 32mm waste systems using a spigot connection. Manufactured from strong plastic with a clean white finish, it offers a secure and reliable joint suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste Clip 40mm Black

The MacWaste Clip 40mm Black is a durable and reliable pipe clip designed to support 40mm waste pipe systems. Manufactured from robust plastic and finished in black, it provides secure pipe retention while helping maintain a neat, professional appearance in domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste Clip 40mm White

The MacWaste Clip 40mm White is a durable pipe support clip designed for 40mm waste pipe installations. Manufactured from strong plastic with a clean white finish, it provides secure pipe retention while ensuring a neat and professional appearance in both domestic and commercial plumbing systems.

MacDonald Plumbing Supplies MacWaste Coupler 40mm Black

The MacWaste Coupler 40mm Black is a reliable waste pipe fitting designed to join two lengths of 40mm waste pipe in a straight run. Manufactured from durable plastic with a black finish, it provides a secure, leak-resistant connection and is suitable for a wide range of domestic and commercial waste system installations.

MacDonald Plumbing Supplies MacWaste Coupler 40mm White

The MacWaste Coupler 40mm White is a durable waste pipe fitting designed to join two lengths of 40mm waste pipe in a straight run. Manufactured from robust plastic with a clean white finish, it provides a secure and reliable connection for domestic and commercial waste pipe installations, repairs, and extensions.

MacDonald Plumbing Supplies MacWaste 90 Degree Bend 40mm Black

The MacWaste 90 Degree Bend 40mm Black is a durable waste pipe fitting designed to change the direction of 40mm waste pipe runs at a 90° angle. Manufactured from strong plastic with a black finish, it provides a secure and reliable connection suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste 90 Degree Bend 40mm White

The MacWaste 90 Degree Bend 40mm White is a durable waste pipe fitting designed to change the direction of 40mm waste pipe runs at a 90° angle. Manufactured from strong plastic with a clean white finish, it provides a secure and reliable connection suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste 92.5 Swept 40mm Black

The MacWaste 92.5° Swept Bend 40mm Black is a durable waste pipe fitting designed to provide a smooth directional change in 40mm waste pipe systems. Manufactured from strong plastic with a black finish, it improves flow efficiency while ensuring a secure and reliable connection.

MacDonald Plumbing Supplies MacWaste 92.5 Swept 40mm White

The MacWaste 92.5° Swept Bend 40mm White is a durable waste pipe fitting designed to provide a smooth and efficient directional change in 40mm waste pipe systems. Manufactured from strong plastic with a clean white finish, it improves flow performance while ensuring a secure and reliable connection.

MacDonald Plumbing Supplies MacWaste 45 Degree Bend 40mm Black

The MacWaste 45 Degree Bend 40mm Black is a durable waste pipe fitting designed to change the direction of 40mm waste pipe runs at a 45° angle. Manufactured from robust plastic with a black finish, it provides a secure and reliable connection suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste 45 Degree Bend 40mm White

The MacWaste 45 Degree Bend 40mm White is a durable waste pipe fitting designed to change the direction of 40mm waste pipe runs at a 45° angle. Manufactured from strong plastic with a clean white finish, it provides a secure and reliable connection suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste Tee 40mm Black

The MacWaste Tee 40mm Black is a durable waste pipe fitting designed to create a branch connection within 40mm waste pipe systems. Manufactured from strong plastic with a black finish, it provides a secure and reliable joint suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste Tee 40mm White

The MacWaste Tee 40mm White is a durable waste pipe fitting designed to create a branch connection within 40mm waste pipe systems. Manufactured from strong plastic with a clean white finish, it provides a secure and reliable joint suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste Access Plug 40mm Black

The MacWaste Access Plug 40mm Black is a durable waste pipe fitting designed to provide easy access into 40mm waste systems for inspection, maintenance, or clearing blockages. Manufactured from strong plastic with a black finish, it offers a secure and reliable sealing solution suitable for domestic and commercial installations.

MacDonald Plumbing Supplies MacWaste Access Plug 40mm White

The MacWaste Access Plug 40mm White is a durable waste pipe fitting designed to provide easy access into 40mm waste systems for inspection, maintenance, or clearing blockages. Manufactured from strong plastic with a clean white finish, it offers a secure and reliable sealing solution suitable for domestic and commercial installations.

MacDonald Plumbing Supplies MacWaste Spigot 90 Degree 40mm Black

The MacWaste Spigot 90 Degree 40mm Black is a durable waste pipe fitting designed to create a sharp 90° directional change in 40mm waste systems using a spigot connection. Manufactured from strong plastic with a black finish, it provides a secure and reliable joint suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies MacWaste Clip 32mm Black

The MacWaste Clip 32mm Black is a durable pipe support clip designed to securely hold 32mm waste pipe installations in place. Manufactured from robust plastic and finished in black, it provides reliable pipe support while maintaining a neat and professional appearance in both domestic and commercial plumbing systems.

MacDonald Plumbing Supplies MacWaste Clip 32mm White

The MacWaste Clip 32mm White is a durable pipe support clip designed for 32mm waste pipe installations. Manufactured from strong plastic with a clean white finish, it provides secure pipe retention while maintaining a neat and professional appearance in domestic and commercial plumbing systems.

MacDonald Plumbing Supplies MacWaste Coupler 32mm Black

The MacWaste Coupler 32mm Black is a dependable waste pipe fitting designed to join two lengths of 32mm waste pipe in a straight run. Manufactured from durable plastic with a black finish, it provides a secure, leak-resistant connection and is suitable for a wide range of domestic and commercial plumbing applications.

MacDonald Plumbing Supplies MacWaste Coupler 32mm White

The MacWaste Coupler 32mm White is a reliable waste pipe fitting designed to join two lengths of 32mm waste pipe in a straight run. Manufactured from durable plastic with a clean white finish, it provides a secure and leak-resistant connection for domestic and commercial waste pipe installations, repairs, and extensions.

MacDonald Plumbing Supplies MacWaste 90 Degree Bend 32mm Black

The MacWaste 90 Degree Bend 32mm Black is a durable waste pipe fitting designed to change the direction of 32mm waste pipe runs at a 90° angle. Manufactured from strong plastic with a black finish, it provides a secure and reliable connection suitable for domestic and commercial plumbing installations.

MacDonald Plumbing Supplies NovoPress ACO103 c/w MacPress 15mm, 22mm & 28mm Standard M Profile Jaws PLUS MacPress Angled Jaw adaptor & 15mm, 22mm & 28mm Angled Jaws (NB4)

The NovoPress ACO103 c/w MacPress 15mm, 22mm & 28mm Standard M Profile Jaws PLUS MacPress Angled Jaw Adaptor & 15mm, 22mm & 28mm Angled Jaws is a complete and versatile press tool solution. Featuring both standard and angled jaws, this kit is ideal for efficient pipe installations, including work in tight or restricted spaces. Supplied with batteries, charger, and carry case, it offers excellent performance and convenience for professional installers. We have sold over 400 sets of MacPress Jaws in the last 9 months & customer feedback has been amazing - They are the perfect fit for NovoPress ACO102 & ACO103 making this bundle a great value price! PLEASE NOTE: These Jaws are not Official Approved NovoPress as they sell their own version

NovoPress ACO103 c/w Genuine M15, M22 & M28 Profile Jaws

The NovoPress ACO103 c/w Genuine M15, M22 & M28 Profile Jaws is a high-quality press tool kit designed for professional plumbing installations. Supplied with genuine NovoPress M Profile jaws in 15mm, 22mm, and 28mm sizes, this kit ensures precise, reliable, and manufacturer-approved press connections across a wide range of applications.

MacDonald Plumbing Supplies NovoPress ACO103 c/w MacPress 15mm, 22mm & 28mm Standard M Profile Jaws (NB3)

The NovoPress ACO103 c/w MacPress 15mm, 22mm & 28mm Standard M Profile Jaws is a reliable and efficient press tool kit designed for everyday plumbing installations. Supplied with the most commonly used jaw sizes, along with batteries, charger, and carry case, it offers a practical and cost-effective solution for professional installers. We have sold over 400 sets of MacPress Jaws in the last 9 months & customer feedback has been amazing - They are the perfect fit for NovoPress ACO102 & ACO103 making this bundle a great value price! PLEASE NOTE: These Jaws are not Official Approved NovoPress as they sell their own version  

MacDonald Plumbing Supplies Brass ¾ Cap

The Brass 3/4" Cap is a reliable fitting designed to seal off pipe ends in plumbing and heating systems. Manufactured from durable brass, it provides a secure and leak-free connection using a simple compression fitting. Ideal for both temporary and permanent applications, it ensures dependable performance in a wide range of installations.

Todays Tools 22mm Replacement Blades For Pit Bull Pro Quick-Klean Pipe Brush Set QKP Pack of 2 QKB22

The Todays Tools 22mm Replacement Blades For Pit Bull Pro Quick-Klean Pipe Brush Set QKP (Pack of 2) QKB22 are designed to maintain peak cleaning performance for 22mm pipework. Ideal for replacing worn brush heads, they ensure efficient removal of debris, oxidation, and residue. Durable and easy to install, they help extend the life of your Quick-Klean pipe brush system.

Todays Tools 15mm Replacement Blades For Pit Bull Pro Quick-Klean Pipe Brush Set QKP Pack of 2 QKB15

The Todays Tools 15mm Replacement Blades For Pit Bull Pro Quick-Klean Pipe Brush Set QKP (Pack of 2) QKB15 are designed to maintain the performance of your Quick-Klean pipe brush system. Manufactured for durability and precision cleaning, these replacement heads ensure continued effective removal of debris, oxidation, and residue from 15mm pipework. Ideal for professional use, they help extend the lifespan of your cleaning tool.

Todays Tools Pit Bull Pro Quick-Klean Pipe Brush Set QKP

The Todays Tools Pit Bull Pro Quick-Klean Pipe Brush Set PBQKP is a high-performance cleaning solution designed for preparing pipework prior to jointing. Built with premium steel and reinforced shaft technology, it delivers durability and consistent cleaning results. Featuring replaceable brush heads and an efficient design, it ensures effortless removal of debris, oxidation, and residue for reliable pipe connections.

MacDonald Plumbing Supplies MacValve WRAS Remote Filling Loop Part L Compliant with Gauge

The MacValve WRAS Remote Filling Loop Part L Compliant with Gauge is a practical and compliant solution for filling and pressurising central heating systems and heat interface units. Designed for flexible installation, it can be fitted remotely from the boiler or cylinder, making it ideal where access is limited or no integral pressure gauge is present. Supplied complete with a gauge and essential safety components, it ensures accurate pressure monitoring and safe system operation.

FRANKISCHE MLCP Alpex-Duo XS Press Copper Adapter 26 x 22mm

The FRANKISCHE MLCP Alpex-Duo XS Press Copper Adapter 26 x 22mm is a high-quality press fitting designed to connect multilayer composite pipe systems to copper or other metal pipework. Manufactured from dezincification-resistant, lead-free silicon bronze, it delivers excellent durability and corrosion resistance for heating and potable water installations. Featuring a flow-optimised design and integrated leak before press functionality, this adapter ensures a safe, reliable, and efficient system transition.

FRANKISCHE Loctite 55 Pipe Sealant Cord 50m

The Loctite 55 Pipe Sealant Cord 50m is a versatile, non-curing thread sealant designed for fast, reliable and instant full-pressure sealing of both metal and plastic threaded pipes and fittings. Ideal for plumbing, heating, gas and potable water systems, it offers a superior alternative to PTFE tape and hemp. The cord allows for easy adjustment of joints after assembly without compromising the seal. WRAS and NSF/ANSI 61 approved, it provides professional installers with a safe, efficient and mess-free solution for high-performance sealing.

FRANKISCHE MLCP Geberit Mepla Fix 16mm x G1/2 MS Elbow

The FRANKISCHE MLCP Geberit Mepla Fix 16mm x G1/2 MS Elbow is a specialist press fitting designed to connect 16mm multilayer composite pipe to G1/2" female threaded sanitary and installation systems. Manufactured from dezincification-resistant, lead-free silicon bronze, it ensures excellent durability and corrosion resistance. Specifically engineered for compatibility with a wide range of concealed cisterns and sanitary systems, this elbow also features leak before press functionality for added installation safety. Ideal for both heating and potable water applications, it delivers a secure and professional connection every time.

FRANKISCHE MLCP Alpex-Duo XS PE-Xb/Al/PE-RT 16 x 2mm x 13mm Ins x 50m Red

The FRANKISCHE MLCP Alpex-Duo XS PE-Xb/Al/PE-RT 16 x 2mm x 13mm Ins x 50m Red is a high-quality pre-insulated multilayer composite pipe designed for efficient heating and potable water installations. Constructed with a PE-Xb inner layer, aluminium core, and PE-RT outer layer, it delivers excellent strength, flexibility, and thermal performance. Supplied in a 50m coil with 13mm insulation and a red protective jacket, it is ideal for reducing heat loss and clearly identifying heating circuits in residential and commercial systems.

FRANKISCHE MLCP Alpex-Duo XS PE-Xb/Al/PE-RT 20 x 2mm x 13mm Ins x 50m Red

The FRANKISCHE MLCP Alpex-Duo XS PE-Xb/Al/PE-RT 20 x 2mm x 13mm Ins x 50m Red is a high-performance pre-insulated multilayer composite pipe designed for efficient heating and potable water installations. Built with a PE-Xb inner layer, aluminium core, and PE-RT outer layer, it delivers excellent durability, thermal stability, and long-term reliability. Supplied in a 50m coil with 13mm insulation and a red protective jacket, it is ideal for reducing heat loss and clearly identifying heating circuits in larger installations.

FRANKISCHE MLCP Alpex-Duo XS PE-Xb/Al/PE-RT 26 x 3mm x 13mm Ins x 25m Red

The FRANKISCHE MLCP Alpex-Duo XS PE-Xb/Al/PE-RT 26 x 3mm x 13mm Ins x 25m Red is a high-performance pre-insulated multilayer composite pipe designed for efficient and reliable heating and potable water installations. Constructed with a PE-Xb inner layer, aluminium core, and PE-RT outer layer, it offers excellent strength, durability, and thermal stability. Supplied in a 25m coil with 13mm insulation and a red protective jacket, it is ideal for reducing heat loss and clearly identifying heating flow lines.

FRANKISCHE MLCP Alpex-Duo XS Adapter 1 1/4" Female Thread 32mm

The FRANKISCHE MLCP alpex-duo XS Adapter 1 1/4" Female Thread 32mm is a high-quality press fitting designed to connect multilayer composite pipe to threaded components in heating and potable water systems. Manufactured from dezincification-resistant, lead-free silicon bronze, it offers excellent durability and corrosion resistance. Featuring a secure press connection with leak before press functionality, it ensures safe and efficient installations. Ideal for professional plumbers and heating engineers, this adapter delivers reliable performance and long-term system integrity.

FRANKISCHE MLCP Alpex-Duo XS Press Copper Adapter 16 x 15mm

The FRANKISCHE MLCP Alpex-Duo XS Press Copper Adapter 16 x 15mm is a high-quality press fitting designed to connect multilayer composite pipe systems to copper or metal pipework. Manufactured from dezincification-resistant, lead-free silicon bronze, it ensures long-lasting durability and reliable performance in both heating and potable water installations. Featuring a flow-optimised design and integrated leak before press functionality, this adapter provides a safe and efficient transition between pipe systems.

FRANKISCHE MLCP Alpex-Duo XS Press Copper Adapter 20 x 15mm

The FRANKISCHE MLCP Alpex-Duo XS Press Copper Adapter 20 x 15mm is a high-quality press fitting designed to connect multilayer composite pipe systems to copper or other metal pipework. Manufactured from dezincification-resistant, lead-free silicon bronze, it provides excellent durability and corrosion resistance for heating and potable water applications. Featuring a flow-optimised design and leak before press functionality, this adapter ensures a safe, reliable, and efficient transition between pipe systems.

FRANKISCHE MLCP Alpex-Duo XS Press Copper Adapter 20 x 22mm

The FRANKISCHE MLCP Alpex-Duo XS Press Copper Adapter 20 x 22mm is a high-quality press fitting designed to connect multilayer composite pipe systems to copper, carbon steel, or stainless steel pipework. Manufactured from dezincification-resistant, lead-free silicon bronze, it provides excellent durability and corrosion resistance for both heating and potable water applications. Featuring a flow-optimised design and leak before press functionality, this adapter ensures a safe, reliable, and efficient transition between different pipe systems.

Regin Jumbo Blue Rolls 2 Ply x 2 (400Mtrs X 275mm) REGW82

he Regin Jumbo Blue Rolls 2 Ply x 2 (400M x 275mm) REGW82 offer a reliable and highly absorbent solution for cleaning and maintenance tasks across a wide range of environments. Each roll provides 400 metres of material and approximately 1000 sheets, ensuring long-lasting use in busy workplaces. With a strong 2 ply construction and 275mm width, these rolls are ideal for workshops, plumbing jobs, kitchens and commercial settings where efficiency and durability are essential.

Regin Green Arrow On White Direction Tape 33M REGA49

The Regin Green Arrow On White Direction Tape 33M REGA49 is designed to clearly indicate flow direction on pipework and systems. Featuring a bold green arrow on a white background, it provides high visibility and easy identification in both domestic and commercial installations. Supplied on a 33 metre roll, this tape is ideal for marking heating, water and other pipe systems to improve safety, organisation and compliance on site.

Todays Tools Pit Bull Jet Klean Air Duster

The Todays Tools Pit Bull Jet Klean Air Duster is a powerful and versatile cleaning tool designed for removing dust and debris from a wide range of surfaces. With a high-speed 11,000 RPM motor and USB-C rechargeable functionality, it delivers strong, consistent airflow without the need for disposable air cans. Featuring a 2,000mAh battery, it offers reliable performance with extended usage time, making it ideal for workshops, electronics, and general maintenance tasks. Supplied with four attachments and a convenient storage case, it ensures efficient and organised cleaning on the go.

Rob Pond PressFit 22mm Perfect Pump Valve Pair

The Rob Pond PressFit 22mm Perfect Pump Valve Pair PPV22-PF provides a reliable and efficient solution for connecting circulating pumps in heating systems. Designed with 22mm M profile press connections and 1½" swivel unions, these valves allow quick installation and secure pump isolation. Manufactured from durable nickel plated brass and rated to 16 bar, they offer excellent strength and long-term reliability. Supplied as a matched pair with rubber washers, they ensure a tight seal and simplify installation for professional heating engineers.

FM Products Clip Link Pipe Clip Spacer Block Blue (Qty Of 20) P636

The Clip Link Pipe Clip Spacer Block Blue (Qty 20) P636 is designed for use with Clip Link pipe clips to help achieve equal spacing when installing pipework. These spacer blocks create additional stand-off between the pipe and the fixing surface, allowing pipe runs to remain neat, tidy and evenly aligned. They are particularly useful when installing insulated pipework, as they allow lagging up to 30mm thick without compressing the insulation. Supplied in a handy pack of 20, they are ideal for smaller plumbing and heating installations where a professional finish is required.

FM Products Clip Link Pipe Clip Spacer Block Yellow (Qty Of 20) P637

The Clip Link Pipe Clip Spacer Block Yellow (Qty 20) P637 is designed to work with Clip Link pipe clips to maintain equal spacing when installing pipework. These spacer blocks create a stand-off between the pipe clip and the mounting surface, allowing pipe runs to stay straight, evenly spaced and professionally finished. They are particularly useful when installing insulated pipework, as they allow lagging up to 30mm thick without compressing the insulation. Supplied in a handy pack of 20, these spacer blocks are ideal for plumbing and heating installations where neat pipe alignment is important.

FM Products Clip Link Pipe Clip Spacer Block Black (Qty Of 20) P638

The Clip Link Pipe Clip Spacer Block Black (Qty 20) P638 is designed for use with Clip Link pipe clips to ensure even and consistent spacing when installing pipework. These spacer blocks provide a stand-off between the pipe clip and the fixing surface, allowing pipe runs to remain straight, tidy and professionally aligned. They are particularly useful when working with insulated pipework, as they allow lagging up to 30mm thick without compressing the insulation. Supplied in a convenient pack of 20, these spacer blocks are ideal for plumbing and heating installations where neat pipe runs are essential.

FM Products Clip Link Pipe Clip Spacer Block Red (Qty Of 20) P635

The Clip Link Pipe Clip Spacer Block Red (Qty 20) P635 is designed for use with Clip Link pipe clips to ensure equal spacing when installing pipework. These spacer blocks create additional stand-off between the pipe and the fixing surface, helping to maintain a neat and professional installation. They are especially useful when working with insulated pipework, as they allow for lagging up to 30mm thick without compressing the insulation. Supplied in a convenient pack of 20, they are ideal for smaller plumbing and heating jobs where consistent pipe spacing is required.

Arctic Hayes SleepSafe Carbon Monoxide Alarm/Detector COA10

The Arctic Hayes SleepSafe Carbon Monoxide Alarm/Detector COA10 is a dependable, self contained safety device designed to protect occupants from the dangers of carbon monoxide exposure. Suitable for homes, caravans, and boats, this easy to use alarm features a sealed-for-life 10 year battery and provides continuous monitoring without the need for wiring or battery replacement. Certified to EN50291-1:2010 and EN50291-2:2010 standards, it meets essential safety requirements and is ideal for domestic installations, including social and council housing applications.

Todays Tools Screwdriver Bit Holder Carabiner Set CCBH

The Todays Tools Screwdriver Bit Holder Carabiner Set CCBH is a practical and convenient solution for keeping frequently used screwdriver bits organised and easily accessible. Designed for trade professionals and DIY users alike, this set allows you to securely store bits while attaching them to tool belts, bags, or workwear using the integrated carabiner clip. Ideal for on-site efficiency, it helps reduce time spent searching for loose bits and keeps essential accessories within easy reach throughout the working day.

MacDonald Plumbing Supplies MacCompression 22mm Slip Coupling

The MacCompression 22mm Slip Couplings provide a dependable solution for repairing or extending 22mm pipework where movement is limited or access is restricted. Designed with a slip function, these couplings slide along the pipe to bridge gaps or replace damaged sections without requiring pipe disassembly. Manufactured to BS EN 1254-2 standards and WRAS approved, they are suitable for potable water systems and professional plumbing installations. Supplied complete with copper olives, they ensure a secure, watertight seal and reliable long term performance.

MacDonald Plumbing Supplies MacCompression 15mm Slip Coupling

The MacCompression 15mm Slip Coupling is a practical and dependable solution for repairing or extending 15mm pipework without the need for additional pipe movement. Designed for ease of installation, this coupling slides along the pipe to bridge gaps or replace damaged sections, making it ideal for maintenance, repair, and retrofit plumbing tasks. Manufactured to BS EN 1254-2 standards and WRAS approved, it ensures reliable performance and suitability for potable water systems. Supplied complete with copper olives, it provides a secure, watertight seal for professional and long lasting installations.

Todays Tools PBBSK Replacement Blades for Folding Knife & Scraper (Pack of Ten)

The Todays Tools PBBSK Folding Knife & Scraper Replacement Blades (Pack of Ten) are designed to keep your PBSK folding knife and scraper performing at its best. Manufactured to precise dimensions, each blade measures 19mm x 60mm for a secure fit and consistent cutting performance. Ideal for trade professionals and DIY users alike, these replacement blades ensure your tool stays sharp, efficient, and ready for demanding tasks. Supplied in a convenient pack of ten, they provide excellent value while reducing downtime caused by worn or blunt blades.

Regin Ground Source Heat Pump Service & Maintenance Pad REGP49

The Regin Ground Source Heat Pump Service & Maintenance Pad REGP49 is a professional documentation pad designed for engineers carrying out installation and servicing of ground source heat pump systems. It provides a clear and structured record of work completed, supporting compliance and best practice within the heating industry. Supplied as a triplicate pad, it allows copies to be retained by the engineer, the customer and for official records. Ideal for both domestic and commercial installations, this pad helps ensure accurate service history and transparent certification of ground source heat pump work.

Regin Decommissioned Appliance Report Pad REGP59

The Regin Decommissioned Appliance Report Pad REGP59 is a professional reporting pad designed to document the safe decommissioning of boilers and other appliances that must not be used again. It provides clear written evidence that an appliance has been taken out of service, helping engineers meet compliance requirements and protect both customers and contractors. Supplied with 25 reports in triplicate, this pad allows copies to be retained by the engineer, the customer and for official records. It is ideal for use alongside Regin REGP36 and REGP26 warning stickers to clearly mark appliances as decommissioned.

Regin Pillar Tap Washers ½ Poly (Pack Of 10) REGQ196

The Regin Pillar Tap Washers 1/2" Poly (Pack of 10) REGQ196 are reliable replacement washers designed for maintaining and repairing pillar taps. Manufactured from durable polythene material, these washers provide an effective seal to help prevent drips and leaks in tap assemblies. Supplied in a convenient pack of 10, they are ideal for plumbers, maintenance engineers and DIY users who want dependable spares readily available. Suitable for routine servicing and tap refurbishment, these washers help restore smooth operation and extend the lifespan of pillar taps in domestic and commercial installations.

Regin Pillar Tap Washers ¾ Poly (Pack Of 10) REGQ197

The Regin Pillar Tap Washers ¾ Poly (Pack of 10) REGQ197 are dependable replacement washers designed for servicing and maintaining pillar taps. Manufactured from durable polythene material, these washers provide an effective seal to help eliminate drips and restore proper shut off performance. Supplied in a convenient pack of 10, they are ideal for plumbers, maintenance engineers and DIY users who want reliable spares readily available. Suitable for use in both domestic and commercial environments, these washers offer a simple and cost effective solution for routine tap repairs.

Regin Pipe Label HEATING (Pack of 8) REGQ636

The Regin Pipe Label HEATING (Pack of 8) REGQ636 is designed to provide clear and professional identification of heating pipework within domestic and commercial systems. These labels help ensure instant recognition of pipe contents, improving safety, compliance and ease of maintenance. Supplied in a convenient pack of eight, they are ideal for installers, maintenance engineers and facilities managers who need consistent and accurate pipe marking. Suitable for new installations or retrofitting to existing systems, these labels support good practice in heating system identification.

Regin Replacement Mini Premier Gauge Filling Nozzle Grey (for REGU33 ONLY) REGU27

The Regin Replacement Mini Premier Gauge Filling Nozzle Grey (For REGU33 Only) REGU27 is a genuine replacement component designed exclusively for use with the Regin REGU33 Mini Premier Gauge. Featuring a distinctive grey top, this nozzle ensures accurate and reliable filling performance is maintained when the original nozzle becomes worn or damaged. Ideal for heating engineers and service professionals, it helps extend the working life of the REGU33 gauge while maintaining correct operation. Simple to fit and purpose made, it provides peace of mind that the gauge continues to perform as intended.

Regin Replacement Large Premier Gauge Filling Nozzle Grey (for REGU40 ONLY) REGU44

The Regin Replacement Large Premier Gauge Filling Nozzle Grey (For REGU40 Only) REGU44 is a genuine replacement component designed exclusively for the Regin REGU40 Premier 60 Gauge. The grey top nozzle ensures accurate and reliable filling performance is maintained when the original nozzle becomes worn or damaged. Ideal for heating engineers and service professionals, this replacement part allows the gauge to continue functioning correctly without the need for a full gauge replacement. Easy to fit and purpose made, it guarantees compatibility and durability for ongoing use in heating systems.

Regin Braided Glass Yarn 6mm x 5mtr Black REGY17

The Regin Braided Glass Yarn 6mm x 5mtr Black REGY17 is a durable and flexible stove rope, designed for use in sealing and insulating stoves, fireplaces and other high-temperature applications. Made from high-quality braided glass yarn, it withstands heat and maintains its shape, providing a reliable seal that prevents air leaks and enhances efficiency. Supplied in a 5-metre pack, this black stove rope is ideal for maintenance, repair or new installations, offering a professional finish and long-lasting performance.

Regin Braided Glass Yarn 10mm x 5mtr Black REGY22

The Regin Braided Glass Yarn 10mm x 5mtr Black REGY22 is a robust and flexible stove rope, designed for sealing and insulating stoves, fireplaces, and other high-temperature applications. Made from premium braided glass yarn, it provides excellent heat resistance and maintains a secure seal, preventing air leaks and improving stove efficiency. Supplied in a 5-metre roll, this black stove rope is ideal for maintenance, repairs, or new installations, ensuring long-lasting performance and a professional finish.

Regin Braided Glass Yarn 12mm x 5mtr Black REGY24

The Regin Braided Glass Yarn 12mm x 5mtr Black REGY24 is a durable and flexible stove rope, designed for sealing and insulating stoves, fireplaces, and other high-temperature applications. Made from premium braided glass yarn, it offers excellent heat resistance and creates a reliable seal that prevents air leaks and improves efficiency. Supplied in a 5-metre roll, this black stove rope is ideal for maintenance, repairs, or new installations, providing long-lasting performance and a professional finish.

Regin Air Source Heat Pump Service & Maintenance Pad REGP48

The Regin Air Source Heat Pump Service & Maintenance Pad REGP48 is a purpose-designed documentation pad for engineers involved in the servicing and installation of air source heat pump systems. It provides clear, professional certification of both installation and ongoing maintenance work, helping ensure compliance and accurate record keeping. Supplied in a convenient triplicate format, this pad allows engineers to retain copies for themselves, the customer and official records. Ideal for use in domestic and commercial settings, it supports best practice by making service history easy to record, track and reference.

Todays Tools PitBull Pipelagger Mitre Box, Saw, & Sharpener TLAG

The Todays Tools PitBull Pipelagger Mitre Box, Saw and Sharpener TLAG is a robust and practical pipe cutting and finishing solution designed for trade professionals and serious DIY users. This complete kit includes a durable mitre box for guiding accurate angled cuts, a high quality saw for fast, clean pipe cutting and a dedicated sharpener to keep blades performing at their best. Built with everyday use in mind, it is ideal for cutting plastic, copper, PVC and other tubing materials commonly found in plumbing, heating and mechanical installations. Whether working on site or in the workshop, this Pipelagger kit ensures reliable, consistent performance and improved cutting precision.

Todays Tools Large Drip Stopper Bung DSL

The Todays Tools Large Drip Stopper Bung DSL is a practical and effective accessory designed to temporarily seal pipes and stop unwanted drips during maintenance, repairs or system flushing. Suitable for a wide range of pipe diameters from 13 mm up to 42 mm, this drip stopper bung provides a secure seal that helps prevent water wastage and keeps work areas cleaner and safer. Easy to insert and remove, it is an essential tool for plumbers, heating engineers and maintenance professionals working on domestic and commercial systems.

Todays Tools Regular Drip Stopper Bung (Pack of Two) DSR

The Todays Tools Regular Drip Stopper Bung (Pack of Two) DSR is a practical and versatile solution for temporarily sealing small pipework during maintenance, repairs or flushing operations. Supplied as a pair, these drip stopper bungs are suitable for pipes with diameters between 5 mm and 22 mm, providing a tight and reliable seal to prevent unwanted drips and leaks. Lightweight and easy to use, they help reduce water wastage, protect work areas and make servicing tasks quicker and cleaner for plumbers, heating engineers and general tradespeople.

Todays Tools XL Folding Bucket 20ltr with Hozelock Drain Off FBXL

The Todays Tools XL Folding Bucket 20ltr with Hozelock Drain Off FBXL is a practical, heavy duty solution designed specifically for plumbing and general trade applications. Developed following the success of the original Pit Bull Folding Bucket, this XL version offers an increased 20 litre capacity, making it ideal for larger tasks on site. Its robust construction ensures durability in demanding environments, while the folding design allows it to collapse flat for easy storage in vans or toolboxes. Featuring a quick hose connection and integrated shut off valve, this bucket provides excellent control when draining water, helping to reduce mess and improve efficiency during everyday plumbing jobs.

Regin 300mm Extension Drill Bar (For T78 Hex Brush) REGT68

The Regin 300mm Extension Drill Bar For T78 Hex Brush is designed to extend the reach of the Regin REGT78 filament hex brush, making it easier to access deep or hard to reach areas during cleaning and preparation tasks. With a robust 300mm length, this extension bar allows for improved efficiency when working inside pipes, ducts or confined spaces. It is engineered for secure and stable operation, ensuring consistent performance when used with compatible drill driven brush systems. Supplied complete with fixing components, it offers a simple and reliable solution for extending cleaning capability on site.

MacDonald Plumbing Supplies MacCompression Reducing Coupling Poly P25 x 22mm

The MacCompression Reducing Coupling Poly P25 x 22mm is designed to connect 25mm MDPE pipe to 22mm pipework quickly and securely. Manufactured from high quality poly material, this compression fitting provides a dependable solution for reducing pipe sizes in cold water supply installations. Kitemarked and WRAS Approved, it meets recognised UK standards for potable water use, making it suitable for both domestic and commercial applications. Its robust construction ensures a long service life, even in demanding ground level or external environments.

MacDonald Plumbing Supplies MacOverflow Equal Tee 21.5mm White PACK OF 10

The MacOverflow Equal Tee 21.5mm White is a reliable solution for forming equal branch connections within overflow waste systems. Designed to suit standard 21.5mm overflow pipe, these fittings allow a straight run with an equal branch, making them ideal for connecting multiple overflows into a single line. The white finish provides a clean, discreet appearance that blends well with most sanitaryware and visible pipework. Supplied in a handy pack of 10, they are perfect for installers who need consistent, dependable fittings for repeated jobs.

MacDonald Plumbing Supplies MacOverflow 21.5mm Overflow to 32mm Waste Adaptor Black PACK OF 10

The MacOverflow 21.5mm Overflow to 32mm Waste Adaptor Black provides a simple and reliable solution for connecting standard 21.5mm overflow pipework into 32mm waste systems. Ideal for use with basins, cisterns and appliances, this adaptor ensures a smooth transition between overflow and waste pipe sizes. The black finish offers a discreet, professional look, particularly suited to concealed or modern installations. Supplied in a practical pack of 10, it is an excellent choice for trade professionals carrying out multiple installations or maintenance work.

MacDonald Plumbing Supplies MacOverflow 21.5mm Overflow to 32mm Waste Adaptor White PACK OF 10

The MacOverflow 21.5mm Overflow to 32mm Waste Adaptor White offers a neat and reliable solution for connecting standard 21.5mm overflow pipework into 32mm waste systems. Commonly used with basins, cisterns and appliance overflows, this adaptor ensures a clean transition between pipe sizes while maintaining proper flow. The white finish is ideal for visible installations where a tidy, unobtrusive appearance is required. Supplied in a convenient pack of 10, it is well suited to trade use, maintenance work and multiple installations.

MacDonald Plumbing Supplies MacOverflow 21.5mm Overflow to 40mm Waste Adaptor Black PACK OF 10

The MacOverflow 21.5mm Overflow to 40mm Waste Adaptor Black provides a practical and reliable solution for connecting standard 21.5mm overflow pipework into 40mm waste systems. Commonly used on basins, cisterns and appliance overflows, this adaptor ensures a smooth transition between pipe sizes while maintaining correct flow and alignment. The black finish is ideal for modern installations or where pipework is visible. Supplied in a trade-friendly pack of 10, it is well suited to professional plumbers and maintenance engineers.

MacDonald Plumbing Supplies MacOverflow 21.5mm Overflow to 40mm Waste Adaptor White PACK OF 10

The MacOverflow 21.5mm Overflow to 40mm Waste Adaptor White is designed to provide a clean and reliable transition from standard 21.5mm overflow pipework into 40mm waste systems. Commonly used on basins, toilet cisterns and appliance overflows, this adaptor ensures correct alignment and dependable performance. The white finish is ideal for traditional installations or where pipework needs to blend discreetly with sanitaryware. Supplied in a convenient pack of 10, it is well suited to trade use and repeat installations.

MacDonald Plumbing Supplies MacOverflow Equal Tee 21.5mm Black PACK OF 10

The MacOverflow Equal Tee 21.5mm Black is designed for creating neat, reliable branch connections within overflow waste systems. Manufactured to suit standard 21.5mm overflow pipe, these equal tees allow a straight-through run with a balanced branch, making them ideal for linking multiple appliance overflows into a single waste line. Finished in black for a clean, discreet appearance, they are well suited to both domestic and commercial plumbing installations. Supplied in a convenient pack of 10, they offer excellent value for installers and maintenance teams carrying out multiple jobs.

MacDonald Plumbing Supplies MacTape Cloth Insulation Tape 50mm x 50mtr Silver

The MacTape Cloth Insulation Tape 50mm x 50Mtr Silver is a reliable, heavy-duty solution designed for professional sealing, jointing and general repair applications. Manufactured from strong yet flexible polythene-coated fabric, this cloth tape delivers excellent durability while remaining easy to handle and apply. The aggressive pressure-sensitive high-tack adhesive ensures a secure bond on a wide range of surfaces, making it ideal for both indoor and outdoor use. With good water resistance and excellent conformability, this tape is well suited for plumbing, heating, electrical and general maintenance tasks where a dependable seal is required.

MacDonald Plumbing Supplies MacOverflow 90 Deg Knuckle Bend 21.5mm Black PACK OF 10

The MacOverflow 90 Deg Knuckle Bend 21.5mm Black is a versatile and durable fitting designed to create a smooth 90 degree change of direction in 21.5mm overflow pipework. Its compact knuckle bend shape allows for tighter turns than a standard swept bend, making it ideal for installations where space is restricted. Manufactured from strong, reliable plastic, it provides a secure and leak free connection that supports efficient flow in overflow systems. The modern black finish offers a discreet and tidy appearance, particularly suited to exposed or visible pipe runs in both domestic and commercial environments.

MacDonald Plumbing Supplies MacOverflow 90 Deg Knuckle Bend 21.5mm White PACK OF 10

The MacOverflow 90 Deg Knuckle Bend 21.5mm White is designed to provide a neat and reliable 90 degree directional change within 21.5mm overflow pipework. Its compact knuckle bend shape allows for tighter, more efficient turns than a traditional swept bend, making it ideal for installations where space is limited. Manufactured from durable white plastic, it gives a clean and discreet finish that blends seamlessly with surrounding sanitaryware. Perfect for both domestic and commercial overflow systems, this fitting ensures a secure, leak free connection that supports smooth water flow.

MacDonald Plumbing Supplies MacOverflow 45 Deg Obtuse Bend 21.5mm Black PACK OF 10

The MacOverflow 45 Deg Obtuse Bend 21.5mm Black is a reliable and versatile fitting designed to create a smooth 45 degree change of direction in 21.5mm overflow pipework. Its obtuse angle promotes efficient water flow while reducing the risk of turbulence or restriction. Made from robust black plastic, it is ideal for installations where a discreet, low visibility fitting is preferred. Suitable for domestic and commercial overflow systems, this bend delivers a secure, leak free connection and ensures long term performance.

MacDonald Plumbing Supplies MacOverflow 45 Deg Obtuse Bend 21.5mm White PACK OF 10

The MacOverflow 45 Deg Obtuse Bend 21.5mm White is a dependable fitting designed to create a smooth 45 degree diversion in 21.5mm overflow pipework. Its obtuse angle supports efficient water flow while minimising turbulence and resistance. Manufactured from durable white plastic, it provides a clean and tidy appearance, making it ideal for visible internal installations. Whether used in domestic or commercial systems, this bend ensures a secure, leak free and long lasting connection for a wide range of overflow applications.

MacDonald Plumbing Supplies MacOverflow Straight Connector 21.5mm White PACK OF 10

The MacOverflow Straight Connector 21.5mm White is a dependable, easy to install fitting designed to create a secure, leak free join between 21.5mm overflow pipes. Ideal for basins, cisterns, cold water tanks and general overflow systems, it provides a strong and stable connection that ensures excess water is diverted safely. The clean white finish blends seamlessly with standard plumbing pipework, offering a neat and professional appearance. Suitable for both new installations and repair work, this connector is a simple yet essential component for maintaining effective overflow management in domestic and commercial settings.

MacDonald Plumbing Supplies MacOverflow Straight Connector 21.5mm Black PACK OF 10

The MacOverflow Straight Connector 21.5mm Black is a reliable and easy to install component designed for creating secure, watertight joins between 21.5mm overflow pipes. Manufactured for durability, it provides a strong connection that helps prevent leaks in basin, cistern and tank overflow systems. Its slim, tidy design ensures a neat finish, while the black colour offers a modern alternative to traditional white fittings, making it ideal for exposed pipework. Suitable for domestic and commercial plumbing, it is an essential fitting for ensuring safe and effective overflow management.

Todays Tools Pit Bull Deep Hole Pencil & Holster PBPL

The Todays Tools Pit Bull Deep Hole Pencil and Holster PBPL is a robust and reliable marking solution designed for tradespeople and DIY users who need accurate, visible markings in hard to reach areas. Supplied with a convenient belt holster and six replacement leads (four graphite and two yellow), it provides dependable performance across wood, metal, plastic and masonry surfaces. The deep reach tip ensures clear markings inside holes, recesses and tight spaces, improving accuracy in layouts, measurements and cutting lines. Durable, comfortable to handle and simple to use, it is an essential tool for anyone working in construction, joinery or general maintenance.

Todays Tools Pit Bull Folding Knife & Scraper Knife PBSK

The Todays Tools Pit Bull Folding Knife & Scraper Knife PBSK is a versatile and practical tool designed for professionals and DIY users alike. Combining the functionality of a folding knife with a scraper, it provides excellent convenience in one compact design. Supplied complete with 2 spare blades, this tool ensures you always have a sharp edge ready for cutting, trimming, or scraping tasks. Built for durability and ease of use, the Pit Bull PBSK is an essential addition to any tradesperson’s or handyman’s kit.

Todays Tools Pit Bull LED Head Torch PBHT

The Todays Tools Pit Bull LED Head Torch is a versatile, high-performance lighting solution designed for professional and everyday use. With four adjustable light modes and a dimming function, it provides clear, focused illumination exactly where it’s needed. The innovative sensor mode allows hands-free operation, making it ideal for use in confined spaces or when both hands are required for work. It can also be removed from its headband and used as a standalone portable light — perfect for engineers, plumbers, and maintenance professionals on the go. Technical Specification: Battery: Li-ion 1000mAh (included) / 3 x AAA batteries Light Source: P8 LED / COB LED Brightness: 400 lm (P8 High), 120 lm (P8 Low), 200 lm (COB), 500 lm (P8/COB Combo) Beam Distance: 55 m (P8 LED) / 10 m (COB LED) Runtime: 2 h (P8 High), 10 h (P8 Low), 4 h (COB), 1.3 h (Combo) Adjustable Angle: 60° Mounting: Magnetic + Headband

Todays Tools Pit Bull Permanent Marker PBMM

The Todays Tools Pit Bull Permanent Marker PBMM is a reliable and hard-wearing marker designed for professional use across a variety of surfaces. Whether marking copper, plastic, metal, wood, or other building materials, this permanent marker ensures bold, clear, and long-lasting lines that won’t fade during the job. Built for tough site conditions, it’s an essential tool for tradespeople who need accuracy and durability in their work. Compact and easy to carry, the PBMM marker is ideal for plumbers, builders, and engineers.

Todays Tools Pit Bull Funnel-it Flexible Draining Funnel

The Todays Tools Pit Bull Funnel-it is a flexible, high temperature resistant draining funnel designed for clean and efficient fluid transfer. Measuring 369x168x94mm, it bends and forms to create a leak-proof channel, making it ideal for draining and filling in garages, workshops, and industrial sites. Unlike makeshift solutions such as cut jugs or cardboard, this funnel is reusable, durable, and easy to clean with most common degreasers. Its resistance to high temperatures ensures reliable use with oils, lubricants, and hot fluids, preventing mess and accidental spillages while saving time.

Todays Tools Pit Bull Folding Bucket 11L PBFB

The Todays Tools Pit Bull Folding Bucket 11L PBFB is a practical, lightweight and highly durable solution for everyday trade, DIY and outdoor tasks. With an 11 litre capacity, it provides ample volume for carrying water, tools, cleaning supplies or materials while remaining easy to store and transport. Its foldable design allows it to collapse flat, making it ideal for vans, tool bags and tight storage spaces. Built with leakproof construction and reinforced seams, this bucket offers long lasting reliability whether used on site, in the garden or during maintenance work. A convenient, multi purpose option for anyone needing a portable and dependable bucket.

MacDonald Plumbing Supplies MacPress M-Profile Press Tool Kit PZ-1550 (15mm – 54mm)

The MacPress M-Profile Press Tool Kit PZ-1550 (15mm – 54mm) is a robust, full-range press fitting solution designed for high performance across domestic, commercial and industrial installations. Supplied in a durable carry case, the kit includes six M-profile jaws covering 15mm, 22mm, 28mm, 35mm, 42mm and 54mm pipe sizes, giving installers the complete capability needed for larger scale systems. The PZ-1550 delivers a rapid press cycle of approximately four seconds and features an LED cycle monitor to track usage and service intervals. Built for two handed operation with a comfortable inline grip, this tool provides dependable pressing power for demanding environments and high output workloads.     For more information, please follow the link here.   For jaw compatibility, please follow the link here.  

MacDonald Plumbing Supplies MacPress TH Profile Jaw 4 Piece Kit 16mm 20mm 26mm 32mm

The MacPress TH Profile Jaw 4 Piece Kit 16mm 20mm 26mm 32mm is a complete set of TH profile jaws designed for use with the PZ-1930 & MP-1930 press tool. Covering the most commonly used pipe sizes, this kit ensures precise and reliable pressing for multilayer composite pipes (MLCP) in both hot and cold water systems. Ideal for domestic, commercial, and industrial installations, the set allows installers to switch quickly between sizes, maintaining consistent press quality and efficiency. Built to professional standards, these jaws provide durability, accuracy, and long-term performance on every job.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress U Profile 16mm 20mm 25mm & 32mm Jaw Set

The MacPress U Profile 16mm 20mm 25mm & 32mm Jaw Set is a complete professional kit designed for installers working with multilayer (MLCP) pipe systems across a range of common pipe diameters. Each jaw is engineered for accurate U-profile press connections and slots directly into the PZ-1930 & MP-1930 press tool using the secure swivel pin locking mechanism. This set offers the versatility needed for domestic, commercial and light industrial applications, ensuring fast, consistent and leak-free results. Supplied as a matched set, it gives installers a reliable and convenient solution for a wide variety of MLCP installations. For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress U Profile 25mm For PZ-1550

The MacPress U Profile 25mm For PZ-1550 is a precision engineered press jaw designed for creating strong and dependable U profile connections on 25mm multilayer and MLCP pipework. Made for use exclusively with the PZ-1550 press tool when fitted with the correct head adaptor, it offers reliable performance across domestic, commercial and industrial installations. With its sturdy build, smooth operation and accurate pressing action, this jaw ensures consistent, leak free joints in heating, hot and cold water and multilayer pipe systems.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress U Profile 32mm For PZ-1550

The MacPress U Profile 32mm For PZ-1550 is a heavy duty press jaw designed for producing secure and accurate U profile connections on 32mm multilayer and MLCP pipework. Built for use exclusively with the PZ-1550 press tool and its matching head adaptor, this jaw provides reliable performance across domestic, commercial and industrial installations. Its robust construction, smooth operation and consistent pressing force make it ideal for larger diameter multilayer pipelines, heating systems and hot and cold water services where a dependable and leak free connection is essential.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress V Profile Jaw 22mm For PZ-1930 & MP-1930

The MacPress V Profile Jaw 22mm For PZ-1930 & MP-1930 is a professional-grade jaw designed specifically for pressing 22 mm V-profile fittings. Compatible with the PZ-1930 & MP-1930 Z-Press tool, it allows installers to swap quickly between pipe sizes, improving workflow efficiency. Ideal for underfloor heating, central heating, and hot water systems, this jaw ensures secure, leak-free connections. Suitable for copper, stainless steel, and PEX pipes, it is an essential tool for professional installers requiring reliable performance and precise press-fit results.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress V Profile Jaw 28mm For PZ-1930 & MP-1930

The MacPress V Profile Jaw 28mm For PZ-1930 & MP-1930 is a precision-engineered jaw designed for pressing 28 mm V-profile fittings. Compatible with the PZ-1930 & MP-1930 Z-Press tool, it allows installers to switch quickly between pipe sizes, improving workflow efficiency on site. Ideal for underfloor heating, central heating, and hot water systems, this jaw ensures secure, leak-free connections. Suitable for copper, stainless steel, and PEX pipe, it is a trusted accessory for professional installers requiring accuracy, durability, and consistent press-fit results.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress V Profile Jaw 3 Piece Kit 15mm, 22mm, & 28mm for PZ-1930 & MP-1930

The MacPress V Profile Jaw 3 Piece Kit 15mm, 22mm, & 28mm for PZ-1930 & MP-1930 provides installers with a complete set of V-profile jaws for pressing the most commonly used pipe sizes. Designed for use with the PZ-1930 & MP-1930 Z-Press tool, each jaw offers fast, dependable and leak-free crimping across copper, stainless steel and PEX systems. Ideal for underfloor heating, central heating and hot water installations, this versatile kit enables rapid jaw changes to improve workflow and reduce downtime on site. Built for professional use, it delivers reliability, strength and precision for every press.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress M Profile Jaw 15mm For PZ-1550

The MacPress M Profile Jaw 15mm For PZ-1550 is engineered for direct use with the PZ-1550 Z-PRESS hydraulic battery press tool, eliminating the need for a jaw adaptor. Designed for forming accurate and secure M-profile press connections on 15 mm copper press fittings, it offers smooth operation and dependable performance for professional installers. Its robust construction and precise fit ensure consistent, leak-free results across heating, hot water and general plumbing applications. Ideal for on-site efficiency, this jaw supports quick changes and reliable pressing every time.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress M Profile Jaw 22mm For PZ-1550

The MacPress M Profile Jaw 22mm For PZ-1550 is a precision engineered jaw designed for direct use with the PZ-1550 hydraulic battery press tool. With no adaptor required, it enables fast, accurate and secure pressing of 22 mm M-profile copper fittings. Built for professional performance, this jaw ensures uniform deformation of fittings, producing strong, dependable and leak-free joints across heating, hot water and general plumbing installations. Its durable construction and quick-change design make it ideal for busy installers who need reliable results on every job.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress M Profile Jaw 28mm For PZ-1550

The MacPress M Profile Jaw 28mm For PZ-1550 is a professional-grade jaw designed for direct use with the PZ-1550 hydraulic battery press tool, requiring no adaptor. It is ideal for pressing 28 mm M-profile copper fittings, providing accurate, secure, and leak-free joints. This jaw is built for durability and consistent performance, making it suitable for domestic, commercial, and industrial plumbing applications, including heating and hot water systems. Its quick-fit design allows fast jaw changes to improve installation efficiency on site.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress M Profile Jaw 35mm For PZ-1550

The MacPress M Profile Jaw 35mm For PZ-1550 is a precision-engineered jaw designed for direct use with the PZ-1550 hydraulic battery press tool. Eliminating the need for an adaptor, it allows installers to create secure, leak-free connections on 35 mm M-profile copper fittings efficiently. Built for professional trade use, this jaw provides consistent, accurate pressing across heating, hot water, and general plumbing applications, ensuring reliability and high-quality results on every job.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress M Profile Jaw 42mm For PZ-1550

The MacPress M Profile Jaw 42mm For PZ-1550 is a high-quality pressing jaw designed for direct use with the PZ-1550 hydraulic battery press tool, requiring no adaptor. It enables precise and reliable pressing of 42 mm M-profile copper fittings, delivering secure, leak-free connections for heating, hot water, and general plumbing installations. Built for professional installers, it ensures consistent performance, efficiency on site, and long-term durability.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress M Profile Jaw 54mm For PZ-1550

The MacPress M Profile Jaw 54mm For PZ-1550 is a professional-grade pressing jaw designed for direct use with the PZ-1550 hydraulic battery press tool, requiring no adaptor. It provides precise and secure pressing for 54 mm M-profile copper fittings, ensuring strong, leak-free connections for heating, hot water, and general plumbing applications. Engineered for durability and efficiency, it is ideal for professional installers seeking consistent performance and reliable results on every job.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress M Profile Jaw 7 Piece Kit 15mm - 54mm for PZ-1550 Inc. Adaptor

The MacPress M Profile Jaw 7 Piece Kit 15mm - 54mm for PZ-1550 Inc. Adaptor is a comprehensive set designed for professional installers working with M-profile copper fittings. Compatible with the PFTOOL1554, this kit includes six jaw sizes (15mm, 22mm, 28mm, 35mm, 42mm, 54mm) and a jaw adaptor, allowing seamless use with the PZ-1550 press tool. Ideal for heating, hot water, and general plumbing applications, it provides quick jaw changes, reliable performance, and leak-free press connections for all common M-profile pipe sizes. For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress U Profile 16mm For PZ-1550

The MacPress U Profile 16mm For PZ-1550 is a high quality press jaw designed specifically for creating secure U profile press connections on 16mm multilayer and MLCP pipework. Used exclusively with the PZ-1550 press tool when fitted with the correct head adaptor, this jaw offers dependable performance across domestic, commercial and industrial installations. Its precision engineering ensures strong and reliable crimps, making it ideal for hot and cold water systems, heating circuits and multilayer pipe applications.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress U Profile 20mm For PZ-1550

The MacPress U Profile 20mm For PZ-1550 is a professional grade press jaw designed for accurate and reliable U profile pressing on 20mm multilayer and MLCP pipework. Built for use exclusively with the PZ-1550 press tool when fitted with the appropriate head adaptor, it ensures secure and consistent connections across domestic, commercial and industrial installations. Its robust construction and precise pressing action make it ideal for hot and cold water services, heating systems and multilayer pipe applications where dependable performance is essential.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress V Profile Jaw 15mm For PZ-1930 & MP-1930

The MacPress V Profile Jaw 15mm For PZ-1930 & MP-1930 is a specialised jaw designed for pressing 15 mm V-profile fittings. Easily attached to the PZ-1930 & MP-1930 Z-Press tool, it allows for quick swaps between pipe sizes, improving workflow efficiency on site. Ideal for underfloor heating, central heating, and hot water systems, this jaw ensures leak-free connections and consistent performance. Compatible with copper, stainless steel, and PEX pipe, it is a trusted choice for professional installers seeking precision and reliability in HVAC and plumbing applications.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPress Spare Charger With Lead

The Spare Charger With Lead For MacPress Press Tool is an essential replacement accessory for keeping your MacPress press tool fully powered and ready for daily plumbing work. Designed specifically for MacPress battery-operated tools, this charger provides fast, reliable charging to minimise downtime on site. Whether your original charger has been misplaced, damaged, or you simply want an additional unit for convenience, this spare charger ensures you always have a dependable power source available.

MacDonald Plumbing Supplies MacValve Bottom Fill Valve ½ Brass Tail

The MacValve Bottom Fill Valve ½ Brass Tail is a reliable and efficient solution for modern toilet cistern installations. Designed for consistent performance, it delivers smooth and quiet water refilling, making it ideal for both domestic and commercial environments. The robust ½ brass connection ensures long lasting durability, while the bottom entry design offers a neat and discreet installation that suits a wide range of cistern types. With a quick water stop function and precise water control, this valve helps maintain efficient flushing performance and reduces unnecessary water wastage. Its WRAS approval confirms full compliance with UK water regulations, giving installers complete confidence in its quality and reliability.

Regin Fin Straightening Comb REGT74

The Regin Fin Straightening Comb REGT74 is a compact and practical maintenance tool designed to restore bent or damaged fins on heat pumps, radiators, and other appliances that rely on heat dissipation. By realigning the fins, it helps maintain optimal airflow and thermal efficiency, improving system performance and extending component life. The comb features multiple fin spacing options, making it suitable for a variety of heat exchangers and cooling systems. A must-have tool for HVAC engineers, plumbers, and maintenance professionals.

MacDonald Plumbing Supplies MacPress Angled Jaws Case c/w 180 Degree Adaptor 15mm 22mm 28mm & 35mm M Profile Jaws

The MacPress Angled Jaws Case c/w 180 Degree Adaptor 15mm 22mm 28mm & 35mm M Profile Jaws is a complete professional kit designed for installers who need maximum flexibility in tight or awkward spaces. Including 15 mm, 22 mm, 28 mm, and 35 mm M profile angled jaws along with a 180 Degree Adaptor, this kit enables secure and consistent press connections on copper pipework in plant rooms, boiler cupboards, and other restricted areas. All components are supplied in a robust MacPress case for protection, organisation, and ease of transport, making it ideal for both domestic and commercial applications.     For more information, please follow the link here   Compatibility information, please follow the link here  

MacDonald Plumbing Supplies MacPress Angled Jaws Case c/w 180 Degree Adaptor 15mm 22mm & 28mm M Profile Jaws

The MacPress Angled Jaws Case c/w 180 Degree Adaptor 15mm 22mm & 28mm M Profile Jaws is a comprehensive kit designed for professional installers requiring precision and versatility in tight or restricted spaces. This set includes 15 mm, 22 mm, and 28 mm M profile angled jaws along with a 180 Degree Adaptor, enabling secure and consistent press connections on copper pipework in plant rooms, boiler cupboards, or close to walls. Housed in a robust MacPress case, the kit ensures all components are protected, organised, and easily transportable, making it ideal for efficient, high-quality installations across domestic and commercial applications.     For more information, please follow the link here   Compatibility information, please follow the link here  

MacDonald Plumbing Supplies MacPress Angled Jaws Case c/w 180 Degree Adaptor 15mm & 22mm M Profile Jaws

The MacPress Angled Jaws Case c/w 180 Degree Adaptor 15mm & 22mm M Profile Jaws is a complete kit designed for professional installers who need to work efficiently in tight or awkward spaces. This set includes 15 mm and 22 mm angled M profile jaws, plus a 180 Degree Adaptor, all stored in a durable MacPress case for easy organisation and transport. Engineered for precision and durability, the jaws provide secure and consistent press connections on MacPress copper fittings. Ideal for both domestic and commercial applications, this kit helps installers maintain high quality, leak-free results with every press.     For more information, please follow the link here   Compatibility information, please follow the link here  

MacDonald Plumbing Supplies MacPress Angled Jaws Case

The MacPress Angled Jaws Case provides a robust and practical storage solution for professional plumbers using the MacPress system. Purpose-built to hold up to two 180° adaptors and four MacPress jaws, this heavy-duty carry case ensures all components are stored securely and remain protected during transport or on-site use. Made from high-strength plastic with reinforced hinges and metal clasps, the case keeps your tools organised, safe, and ready for immediate access. Designed for convenience and durability, it’s the ideal companion for maintaining your MacPress equipment in perfect working order.

Novopress ACO103 "M" Profile Angled Jaw 15mm & 22mm Adaptor Set with Case

The Novopress ACO103 "M" Profile Angled Jaw 15mm & 22mm Adaptor Set is a professional-grade jaw kit designed for use with the Novopress ACO103 press tool. Engineered for secure and consistent M profile press connections, this set allows reliable pressing of 15mm and 22mm copper press fittings used in domestic and commercial pipework. The angled jaw design offers improved access in restricted and awkward spaces, making it ideal for installations in plant rooms, behind boilers, and near walls. Supplied in a durable carry case, the adaptors are safely stored and easy to transport between jobs. This set is built for professional reliability and long-term use.

Arctic Hayes Multi-Function Screwdriver

The Arctic Hayes Multi-Function Screwdriver is more than just a hand tool — it’s a complete electrical testing device designed for professionals and DIY users alike. This self-testing screwdriver combines multiple testing functions into one compact, easy-to-use tool. It allows you to safely check AC and DC voltages, test polarity, verify circuit continuity, and even detect microwave leakage. With a magnetic screwdriver tip and built-in self-test feature, it ensures accurate readings and safer testing every time.

Todays Tools Pit Bull LED Head Torch PBHT

The Todays Tools Pit Bull LED Head Torch is a versatile, high-performance lighting solution designed for professional and everyday use. With four adjustable light modes and a dimming function, it provides clear, focused illumination exactly where it’s needed. The innovative sensor mode allows hands-free operation, making it ideal for use in confined spaces or when both hands are required for work. It can also be removed from its headband and used as a standalone portable light — perfect for engineers, plumbers, and maintenance professionals on the go. Technical Specification: Battery: Li-ion 1000mAh (included) / 3 x AAA batteries Light Source: P8 LED / COB LED Brightness: 400 lm (P8 High), 120 lm (P8 Low), 200 lm (COB), 500 lm (P8/COB Combo) Beam Distance: 55 m (P8 LED) / 10 m (COB LED) Runtime: 2 h (P8 High), 10 h (P8 Low), 4 h (COB), 1.3 h (Combo) Adjustable Angle: 60° Mounting: Magnetic + Headband

MacDonald Plumbing Supplies MacSil General Purpose Silicone Clear

The MacSil General Purpose Silicone Clear is a premium 280ml adhesive and sealant designed for professional and domestic use where a transparent finish is required. Its mould-resistant formula provides long-lasting protection and a clean, watertight seal that blends seamlessly with any surface. Offering excellent adhesion to glass, ceramics, and metal, this versatile clear silicone is ideal for use in kitchens, bathrooms, and utility areas. Easy to apply and smooth, it delivers a professional-grade finish for both tradespeople and DIY applications.

MacDonald Plumbing Supplies MacSil General Purpose Silicone White

The MacSil General Purpose Silicone White is a premium-quality 280ml adhesive and sealant designed for a wide range of professional and domestic applications. Its mould-resistant formula ensures lasting protection and a clean, smooth finish, even in humid environments like kitchens and bathrooms. With excellent adhesion to glass, ceramics, and metal, this white silicone provides a flexible, watertight seal for joints, gaps, and fixtures. Easy to apply and designed for long-term performance, it’s perfect for both tradespeople and DIY users seeking a professional finish.

MacDonald Plumbing Supplies MacCompression Liners for MDPE 25mm

The MacCompression Liners for MDPE 25mm are designed to provide added strength, security, and reliability when using MDPE compression fittings. Manufactured to a high standard, these pipe liners are both WRAS Approved and Kitemarked, ensuring compliance and performance in potable water applications. By reinforcing the inner wall of the MDPE pipe, they help prevent pipe deformation under compression, guaranteeing a safe and leak-free connection. Trusted by installers, these liners offer peace of mind for long-term durability in underground and above-ground installations.

Todays Tools Pit Bull Funnel-it Flexible Draining Funnel

The Todays Tools Pit Bull Funnel-it is a flexible, high temperature resistant draining funnel designed for clean and efficient fluid transfer. Measuring 369x168x94mm, it bends and forms to create a leak-proof channel, making it ideal for draining and filling in garages, workshops, and industrial sites. Unlike makeshift solutions such as cut jugs or cardboard, this funnel is reusable, durable, and easy to clean with most common degreasers. Its resistance to high temperatures ensures reliable use with oils, lubricants, and hot fluids, preventing mess and accidental spillages while saving time.

MacDonald Plumbing Supplies MacPress Reducing Elbow 22mm x 15mm WATER

The MacPress Reducing Elbow 22mm x 15mm WATER is a premium-quality copper press-fit fitting designed for water pipe installations. Providing a secure 90° connection between 22mm and 15mm pipes, it’s ideal for adapting plumbing layouts neatly and efficiently. With WRAS approval and a 20-year warranty, this reducing elbow offers complete peace of mind on reliability and compliance. Its flame-free press-fit design ensures safe, quick installation while maintaining long-lasting performance, making it the perfect choice for professional plumbers.

Todays Tools Pit Bull Permanent Marker PBMM

The Todays Tools Pit Bull Permanent Marker PBMM is a reliable and hard-wearing marker designed for professional use across a variety of surfaces. Whether marking copper, plastic, metal, wood, or other building materials, this permanent marker ensures bold, clear, and long-lasting lines that won’t fade during the job. Built for tough site conditions, it’s an essential tool for tradespeople who need accuracy and durability in their work. Compact and easy to carry, the PBMM marker is ideal for plumbers, builders, and engineers.

Todays Tools Pit Bull Folding Knife & Scraper Knife PBSK

The Todays Tools Pit Bull Folding Knife & Scraper Knife PBSK is a versatile and practical tool designed for professionals and DIY users alike. Combining the functionality of a folding knife with a scraper, it provides excellent convenience in one compact design. Supplied complete with 2 spare blades, this tool ensures you always have a sharp edge ready for cutting, trimming, or scraping tasks. Built for durability and ease of use, the Pit Bull PBSK is an essential addition to any tradesperson’s or handyman’s kit.

Regin Quad Pipe Cleaning Brush REGT44

The Regin Quad Pipe Cleaning Brush REGT44 is a professional-quality tool designed to clean and deburr copper pipes quickly and effectively. Suitable for both 15mm and 22mm pipes, this brush prepares copper surfaces perfectly for soldering, fluxing, or swaging. By ensuring a clean and smooth pipe finish, it helps achieve stronger, leak-free joints. Ideal for plumbers and heating engineers, the Regin quad brush is a durable and reliable addition to any toolkit, saving time while improving the quality of installations.

MacDonald Plumbing Supplies M10 BZP Large Steel Washer *** BAG OF 100 ***

The M10 BZP Large Steel Washer – Bag of 100 is a heavy-duty fastening accessory designed to provide excellent load distribution and surface protection in bolted joints. Manufactured from strong steel and finished with a Bright Zinc Plated (BZP) coating, these washers deliver both durability and corrosion resistance, ensuring reliable long-term performance. With a larger outside diameter than standard washers, they are ideal for use in construction, engineering, automotive, and general maintenance projects where increased surface coverage and fastening security are required.

MacDonald Plumbing Supplies M10 BZP Narrow Steel Washer *** BAG OF 100 ***

The M10 Narrow BZP Steel Washer – Bag of 100 is a reliable and versatile fastening accessory designed to provide extra strength, stability, and load distribution in bolted connections. Manufactured from durable steel with a bright zinc plated (BZP) finish, these washers deliver excellent corrosion resistance, ensuring long-lasting performance even in demanding environments. Their narrow profile makes them ideal for precise applications where space is limited, while still offering secure support. Supplied in a bulk bag of 100, they are a practical choice for construction, engineering, automotive, and general maintenance work.

MacDonald Plumbing Supplies M10 Hex Nut (Pack of 100)

The M10 Hex Nut is a versatile and dependable fastening solution designed for strength, stability, and ease of use. Manufactured from high-quality materials, these hexagonal nuts are engineered to provide secure connections across a wide range of applications, including construction, automotive, and general engineering projects. The hex design allows for excellent grip with standard tools, making installation and removal quick and efficient. Supplied in a bulk bag of 100, these nuts are ideal for professionals and DIY users alike, ensuring you always have reliable fixings at hand for both heavy-duty and everyday tasks.

MacDonald Plumbing Supplies Rubber Lined Pipe Clamp 94mm - 104mm

The Rubber Lined Pipe Clamp 94mm - 104mm is a reliable solution for securely supporting medium to large pipework in domestic, commercial, and industrial installations. Designed with a strong BZP (Bright Zinc Plated) steel body and a rubber lining, it provides vibration reduction and protects pipe surfaces from damage during installation and use. Featuring an M8/M10 combi nut connection, this clamp offers easy compatibility with standard threaded rods and fixing systems. Perfect for heating, plumbing, and mechanical applications, it ensures both strength and longevity.

MacDonald Plumbing Supplies Rubber Lined Pipe Clamp 109mm - 119mm

The Rubber Lined Pipe Clamp 109mm - 119mm is designed to provide secure support and reliable protection for larger pipework installations. Manufactured from durable BZP (Bright Zinc Plated) steel, this clamp is built to withstand demanding environments while maintaining corrosion resistance. The integrated rubber lining not only cushions the pipe surface but also minimises noise and vibration, making it ideal for heating, plumbing, and industrial systems. Equipped with an M8/M10 combi nut connection, it ensures quick and versatile installation with standard threaded rods.

MacDonald Plumbing Supplies Rubber Lined Pipe Clamp 118mm - 125mm

The Rubber Lined Pipe Clamp 118mm - 125mm provides secure and reliable support for larger pipework in domestic, commercial, and industrial installations. Constructed from robust BZP (Bright Zinc Plated) steel, this clamp is resistant to corrosion while delivering long-term durability. The rubber lining cushions the pipe, minimising vibration and noise, while also protecting the pipe surface from wear. With an M8/M10 combi nut connection, the clamp offers simple, versatile installation across a variety of support systems.

MacDonald Plumbing Supplies Rubber Lined Pipe Clamp 135mm - 146mm

The Rubber Lined Pipe Clamp 135mm - 146mm is designed for securing large-diameter pipework in commercial, industrial, and domestic installations. Made from robust BZP (Bright Zinc Plated) steel, it offers excellent corrosion resistance and long-term durability. The integrated rubber lining protects the pipe surface from wear while reducing vibration and noise. With an M8/M10 combi nut connection, this clamp allows for fast, versatile installation across a range of support systems.

MacDonald Plumbing Supplies Rubber Lined Pipe Clamp 150mm - 162mm

The Rubber Lined Pipe Clamp 150mm - 162mm is engineered to provide secure and durable support for large pipework in commercial, industrial, and domestic installations. Constructed from robust BZP (Bright Zinc Plated) steel, it resists corrosion while offering long-term strength. Its integrated rubber lining reduces vibration and noise, protecting pipe surfaces from wear. The M8/M10 combi nut connection allows for versatile and quick installation, making this clamp ideal for heating, plumbing, and mechanical applications.

MacDonald Plumbing Supplies Rubber Lined Pipe Clamp 158mm - 169mm

The Rubber Lined Pipe Clamp 158mm - 169mm provides secure support for large-diameter pipework in domestic, commercial, and industrial installations. Made from durable BZP (Bright Zinc Plated) steel, this clamp resists corrosion and ensures long-lasting performance. Its integrated rubber lining minimises vibration and noise while protecting the pipe surface from wear. The M8/M10 combi nut connection allows quick and versatile installation, making it suitable for plumbing, heating, and mechanical systems.

MacDonald Plumbing Supplies Rubber Lined Pipe Clamp 197mm - 207mm

The Rubber Lined Pipe Clamp 197mm - 207mm is designed to provide secure, reliable support for large-diameter pipework in commercial, industrial, and domestic installations. Made from durable BZP (Bright Zinc Plated) steel, it offers corrosion resistance and long-term strength. The integrated rubber lining reduces vibration and noise while protecting the pipe surface from damage. With an M8/M10 combi nut connection, this clamp ensures quick, versatile installation across a variety of support systems.

MacDonald Plumbing Supplies Rubber Lined Pipe Clamp 216mm - 224mm

The Rubber Lined Pipe Clamp 216mm - 224mm provides secure and dependable support for extra-large pipework in domestic, commercial, and industrial installations. Constructed from robust BZP (Bright Zinc Plated) steel, it resists corrosion and ensures long-term durability. The integrated rubber lining reduces vibration and noise while protecting the pipe surface from wear. With an M8/M10 combi nut connection, this clamp allows for fast and versatile installation across a variety of support systems, making it ideal for plumbing, heating, and mechanical applications.

MacDonald Plumbing Supplies Rubber Lined Pipe Clamp 26mm - 30mm

The Rubber Lined Pipe Clamp 26mm - 30mm provides a secure and practical solution for fixing pipework in plumbing, heating, and mechanical installations. Designed to fit pipe sizes from 26mm to 30mm, this clamp features a Bright Zinc Plated (BZP) finish that offers excellent corrosion resistance and long-lasting durability. The integrated rubber lining ensures a firm hold while reducing vibration and minimising noise, protecting both the pipework and the surrounding structure. With its M8/M10 combi nut connection, this clamp offers versatile installation options and is trusted by professionals for strong and dependable pipe support.

MacDonald Plumbing Supplies Rubber Lined Pipe Clamp 48mm - 53mm

The Rubber Lined Pipe Clamp 48mm - 53mm is a reliable solution for securing medium-sized pipework across plumbing, heating, and mechanical installations. Designed to fit pipes between 48mm and 53mm, this clamp combines heavy-duty steel strength with a Bright Zinc Plated (BZP) finish for long-lasting durability. Its integrated rubber lining reduces vibration and noise while protecting the pipe surface from potential damage. With an M8/M10 combi nut fixing, it ensures flexible and straightforward installation across a range of applications.

MacDonald Plumbing Supplies Rubber Lined Pipe Clamp 53mm - 59mm

The Rubber Lined Pipe Clamp 53mm - 59mm is a strong, versatile clamp designed to secure larger pipework in plumbing, heating, and mechanical systems. Its integrated rubber lining cushions the pipe, reducing vibration and noise while preventing surface damage. Constructed from durable steel with a Bright Zinc Plated (BZP) finish, this clamp provides reliable, corrosion-resistant support. The M8/M10 combi nut fitting ensures easy compatibility with common fixing systems.

MacDonald Plumbing Supplies Rubber Lined Pipe Clamp 75mm - 84mm

The Rubber Lined Pipe Clamp 75mm - 84mm is a reliable and versatile clamp designed for supporting large pipework. Constructed from strong steel with a BZP finish, it ensures long-lasting performance and corrosion resistance. The integrated rubber lining reduces vibration, prevents pipe damage, and helps minimise noise within plumbing and heating systems.

MacDonald Plumbing Supplies Rubber Lined Pipe Clamp 13mm - 20mm

The Rubber Lined Pipe Clamp 13mm - 20mm is a high-quality clamp designed to provide strong and reliable support for pipe installations. Suitable for pipe sizes between 13mm and 20mm, it features a BZP (Bright Zinc Plated) finish for corrosion resistance and long-lasting durability. The integrated rubber lining reduces vibration and minimises noise, ensuring a secure yet quiet installation. Fitted with an M8/M10 combi nut connection, this clamp is versatile and easy to fix, making it ideal for both domestic and commercial plumbing or mechanical applications.

ACR Instantor R-Press ⅝ 45 Degree Obtuse Bend PxP (Pack Of 3)

The R-Press ⅝ 45 Degree Obtuse Bend PxP (Pack Of 3) provides a fast, secure, and flame-free method of creating smooth directional changes in refrigeration and air conditioning pipework. Designed with a precision V-profile, it forms a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Manufactured from refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this bend offers long-lasting sealing performance and excellent corrosion resistance. Fully UL 207 certified and cULus listed, it meets stringent industry standards, ensuring safety and reliability in every installation. Suitable for operating pressures up to 48 bar and temperatures between -40°C and 140°C, it is the perfect choice for professional installers who demand both speed and quality.

ACR Instantor R-Press ¾ 45 Degree Obtuse Bend PxP (Pack Of 3)

The R-Press ¾ 45 Degree Obtuse Bend PxP (Pack Of 3) provides a fast, secure, and flame-free method of creating smooth directional changes in refrigeration and air conditioning pipework. Designed with a precision V-profile, it forms a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Manufactured from refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this bend offers long-lasting sealing performance and excellent corrosion resistance. Fully UL 207 certified and cULus listed, it meets stringent industry standards, ensuring safety and reliability in every installation. Suitable for operating pressures up to 48 bar and temperatures between -40°C and 140°C, it is the perfect choice for professional installers who demand both speed and quality.

ACR Instantor R-Press ⅞ 45 Degree Obtuse Bend PxP (Pack Of 3)

The R-Press ⅞ 45 Degree Obtuse Bend PxP (Pack Of 3) provides a fast, secure, and flame-free method of creating smooth directional changes in refrigeration and air conditioning pipework. Designed with a precision V-profile, it forms a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Manufactured from refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this bend offers long-lasting sealing performance and excellent corrosion resistance. Fully UL 207 certified and cULus listed, it meets stringent industry standards, ensuring safety and reliability in every installation. Suitable for operating pressures up to 48 bar and temperatures between -40°C and 140°C, it is the perfect choice for professional installers who demand both speed and quality.

ACR Instantor R-Press 1⅛ 45 Degree Obtuse Bend PxP (Pack Of 2)

The R-Press 1⅛ 45 Degree Obtuse Bend PxP (Pack Of 2) provides a fast, secure, and flame-free method of creating smooth directional changes in refrigeration and air conditioning pipework. Designed with a precision V-profile, it forms a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Manufactured from refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this bend offers long-lasting sealing performance and excellent corrosion resistance. Fully UL 207 certified and cULus listed, it meets stringent industry standards, ensuring safety and reliability in every installation. Suitable for operating pressures up to 48 bar and temperatures between -40°C and 140°C, it is the perfect choice for professional installers who demand both speed and quality.

ACR Instantor R-Press ¼ Stop End PxCAP (Pack Of 3)

The R-Press ¼ Stop End PxCAP (Pack Of 3) provides a reliable, flame-free solution for capping copper pipework in refrigeration and air conditioning systems. Designed with a V-profile for precise mechanical joint connections, it creates a secure seal without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-quality refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this stop end ensures long-lasting leak-free performance. Suitable for operating temperatures from -40°C to 140°C and pressures up to 48 bar, it is UL 207 certified, meeting stringent industry safety and quality standards.

ACR Instantor R-Press ⅜ Stop End PxCAP (Pack Of 3)

The R-Press ⅜ Stop End PxCAP (Pack Of 3) provides a reliable, flame-free solution for capping copper pipework in refrigeration and air conditioning systems. Designed with a V-profile for precise mechanical joint connections, it creates a secure seal without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-quality refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this stop end ensures long-lasting leak-free performance. Suitable for operating temperatures from -40°C to 140°C and pressures up to 48 bar, it is UL 207 certified, meeting stringent industry safety and quality standards.

ACR Instantor R-Press ½ Stop End PxCAP (Pack Of 3)

The R-Press ½ Stop End PxCAP (Pack Of 3) provides a reliable, flame-free solution for capping copper pipework in refrigeration and air conditioning systems. Designed with a V-profile for precise mechanical joint connections, it creates a secure seal without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-quality refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this stop end ensures long-lasting leak-free performance. Suitable for operating temperatures from -40°C to 140°C and pressures up to 48 bar, it is UL 207 certified, meeting stringent industry safety and quality standards.

ACR Instantor R-Press ⅝ Stop End PxCAP (Pack Of 2)

The R-Press ⅝ Stop End PxCAP (Pack Of 2) provides a reliable, flame-free solution for capping copper pipework in refrigeration and air conditioning systems. Designed with a V-profile for precise mechanical joint connections, it creates a secure seal without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-quality refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this stop end ensures long-lasting leak-free performance. Suitable for operating temperatures from -40°C to 140°C and pressures up to 48 bar, it is UL 207 certified, meeting stringent industry safety and quality standards.

ACR Instantor R-Press ¾ Stop End PxCAP (Pack Of 2)

The R-Press ¾ Stop End PxCAP (Pack Of 2) provides a reliable, flame-free solution for capping copper pipework in refrigeration and air conditioning systems. Designed with a V-profile for precise mechanical joint connections, it creates a secure seal without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-quality refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this stop end ensures long-lasting leak-free performance. Suitable for operating temperatures from -40°C to 140°C and pressures up to 48 bar, it is UL 207 certified, meeting stringent industry safety and quality standards.

ACR Instantor R-Press ⅞ Stop End PxCAP (Pack Of 2)

The R-Press ⅞ Stop End PxCAP (Pack Of 2) provides a reliable, flame-free solution for capping copper pipework in refrigeration and air conditioning systems. Designed with a V-profile for precise mechanical joint connections, it creates a secure seal without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-quality refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this stop end ensures long-lasting leak-free performance. Suitable for operating temperatures from -40°C to 140°C and pressures up to 48 bar, it is UL 207 certified, meeting stringent industry safety and quality standards.

ACR Instantor R-Press 1⅛ Stop End PxCAP (Pack Of 1)

The R-Press 1⅛ Stop End PxCAP (Pack Of 1) provides a reliable, flame-free solution for capping copper pipework in refrigeration and air conditioning systems. Designed with a V-profile for precise mechanical joint connections, it creates a secure seal without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-quality refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this stop end ensures long-lasting leak-free performance. Suitable for operating temperatures from -40°C to 140°C and pressures up to 48 bar, it is UL 207 certified, meeting stringent industry safety and quality standards.

ACR Instantor R-Press 1⅛ x ⅞ Reducing Coupler PxP (Pack Of 1)

The R-Press 1⅛ x ⅞ Reducing Coupler PxP (Pack Of 1) provides a fast, flame-free, and dependable solution for connecting copper pipes of different sizes in refrigeration and air conditioning systems. Its precision V-profile design creates a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-grade refrigerant copper (UNS C12200) and featuring a robust HNBR O-ring, it ensures long-lasting sealing performance and resistance to corrosion. UL 207 certified and cULus listed, it complies with strict industry safety standards. Designed for pressures up to 48 bar and temperatures between -40°C and 140°C, it is ideal for professional installers who prioritise safety, efficiency, and reliability.

ACR Instantor R-Press ¼ 90 Degree Street Elbow FTGxP (Pack Of 3)

The R-Press ¼ 90 Degree Street Elbow FTGxP (Pack Of 3) offers a secure, flame-free, and time-efficient solution for changing pipe direction in refrigeration and air conditioning installations. Designed with a male (FTG) end and a press (P) connection, it allows a compact 90-degree change in direction while maintaining system integrity. Manufactured from refrigerant grade copper (UNS C12200) with a robust HNBR O-ring, it delivers exceptional sealing performance and durability. UL 207 certified and cULus listed, it meets stringent safety standards. Capable of operating from -40°C to 140°C and withstanding pressures up to 48 bar, it is perfect for professional installers seeking a fast, safe, and reliable fitting solution.

ACR Instantor R-Press ⅜ 90 Degree Street Elbow FTGxP (Pack Of 3)

The R-Press ⅜ 90 Degree Street Elbow FTGxP (Pack Of 3) offers a secure, flame-free, and time-efficient solution for changing pipe direction in refrigeration and air conditioning installations. Designed with a male (FTG) end and a press (P) connection, it allows a compact 90-degree change in direction while maintaining system integrity. Manufactured from refrigerant grade copper (UNS C12200) with a robust HNBR O-ring, it delivers exceptional sealing performance and durability. UL 207 certified and cULus listed, it meets stringent safety standards. Capable of operating from -40°C to 140°C and withstanding pressures up to 48 bar, it is perfect for professional installers seeking a fast, safe, and reliable fitting solution.

ACR Instantor R-Press ½ 90 Degree Street Elbow FTGxP (Pack Of 3)

The R-Press ½ 90 Degree Street Elbow FTGxP (Pack Of 3) offers a secure, flame-free, and time-efficient solution for changing pipe direction in refrigeration and air conditioning installations. Designed with a male (FTG) end and a press (P) connection, it allows a compact 90-degree change in direction while maintaining system integrity. Manufactured from refrigerant grade copper (UNS C12200) with a robust HNBR O-ring, it delivers exceptional sealing performance and durability. UL 207 certified and cULus listed, it meets stringent safety standards. Capable of operating from -40°C to 140°C and withstanding pressures up to 48 bar, it is perfect for professional installers seeking a fast, safe, and reliable fitting solution.

ACR Instantor R-Press ⅝ 90 Degree Street Elbow FTGxP (Pack Of 3)

The R-Press ⅝ 90 Degree Street Elbow FTGxP (Pack Of 3) offers a secure, flame-free, and time-efficient solution for changing pipe direction in refrigeration and air conditioning installations. Designed with a male (FTG) end and a press (P) connection, it allows a compact 90-degree change in direction while maintaining system integrity. Manufactured from refrigerant grade copper (UNS C12200) with a robust HNBR O-ring, it delivers exceptional sealing performance and durability. UL 207 certified and cULus listed, it meets stringent safety standards. Capable of operating from -40°C to 140°C and withstanding pressures up to 48 bar, it is perfect for professional installers seeking a fast, safe, and reliable fitting solution.