Todays Tools Angled Drive AND

The Todays Tools Angled Drive (AND) is a practical 90 degree drill attachment designed to make drilling easier in restricted spaces and at awkward angles. Ideal for plumbers, electricians and other tradespeople, it allows drilling in areas where a conventional straight drill may be difficult to position. Featuring an aluminium housing and heat treated helical gear and drive shaft, it is built for durability and reliable performance. The attachment is fitted with a 3/8" (10mm) rapid chuck for convenient drill bit changes and includes a removable handle that can be fitted for either left or right handed use. With a maximum operating speed of 3,000 RPM, it offers a versatile solution for demanding installation and maintenance tasks.

Soudal Repair Express Cement Grey 290ml

Soudal Repair Express Cement Grey 290ml is a fast curing acrylic based repair filler with a textured structure designed to provide a cement like finish. It is suitable for repairing and filling cracks, holes and joints in concrete, cement and brickwork. The formulation provides good adhesion to many mineral surfaces and can be used for both interior and exterior applications. It is shrink free and can be painted once fully hardened, making it a practical choice for plumbers, builders, maintenance professionals and DIY users carrying out repair and renovation work.

MacDonald Plumbing Supplies MacPress R-Press Jaw 3/4"

The MacPress R-Press Jaw 3/4" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

MacDonald Plumbing Supplies MacPress R-Press Jaw 7/8"

The MacPress R-Press Jaw 7/8" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

MacDonald Plumbing Supplies MacPress R-Press Jaw 1 1/8"

The MacPress R-Press Jaw 1 1/8" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

MacDonald Plumbing Supplies MacPress R-Press Jaw 3/8"

The MacPress R-Press Jaw 3/8" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

MacDonald Plumbing Supplies MacPress R-Press Jaw 1/2"

The MacPress R-Press Jaw 1/2" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

MacDonald Plumbing Supplies MacPress R-Press Jaw 5/8"

The MacPress R-Press Jaw 5/8" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

MacDonald Plumbing Supplies MacPress R-Press Jaw 1/4"

The MacPress R-Press Jaw 1/4" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

Instantor R-Press Jaw 3/8"

The Instantor R-Press Jaw 3/8" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

Instantor R-Press Jaw 1/2"

The Instantor R-Press Jaw 1/2" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

Instantor R-Press Jaw 5/8"

The Instantor R-Press Jaw 5/8" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

Instantor R-Press Jaw 3/4"

The Instantor R-Press Jaw 3/4" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

Instantor R-Press Jaw 7/8"

The Instantor R-Press Jaw 7/8" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

Instantor R-Press Jaw 1 1/8"

The Instantor R-Press Jaw 1 1/8" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

Instantor R-Press Jaw 1/4"

The Instantor R-Press Jaw 1/4" is a precision-engineered press jaw designed for use with ACR copper pipe press fittings in air conditioning and refrigeration systems. Manufactured from high-strength alloy structural carburised steel with heat-treated hardening, it delivers accurate, consistent pressing performance for up to 20,000 cycles. Ideal for professional HVAC and refrigeration engineers, it provides secure, leak-free joints for high-pressure applications.

Todays Tools Pit Bull Metal Cutting Discs (Pack of 10) 115mm PBMCD

The Todays Tools Pit Bull Metal Cutting Discs 115mm Pack of 10 PBMCD are high-performance cutting discs engineered for fast, accurate cutting of metal materials. Delivering razor-sharp precision, extreme cutting speed, and optimum performance, these professional-grade 115mm discs are ideal for cutting pipe, sheet metal, and other ferrous metal components. Supplied in a convenient pack of 10, they provide outstanding durability and value for everyday trade use.

Todays Tools PlumbThumb PTHUMB

The Todays Tools Plumb Thumb PTHUMB is a practical pipe isolation tool designed to simplify plumbing maintenance without the need to drain the entire system. Featuring a convenient double-ended design, it allows plumbers to temporarily isolate pipework quickly and cleanly, reducing downtime and mess. Manufactured from durable materials for repeated professional use, the Plumb Thumb is an essential addition to any plumber's toolkit.

FRANKISCHE MLCP Alpex T Handle For Individual Deburrer 79000251

The FRANKISCHE MLCP Alpex T Handle For Individual Deburrer 79000251 is a dedicated accessory designed to provide improved grip, control, and comfort when using FRANKISCHE Alpex individual deburring tools. It allows installers to achieve more consistent pipe preparation results while working on MLCP systems. Durable and easy to attach, it is an essential enhancement for professional pipe installation work.

MacDonald Plumbing Supplies NovoPress ACO103 c/w MacPress 15mm, 22mm & 28mm Standard M Profile Jaws (NB3)

The NovoPress ACO103 c/w MacPress 15mm, 22mm & 28mm Standard M Profile Jaws is a reliable and efficient press tool kit designed for everyday plumbing installations. Supplied with the most commonly used jaw sizes, along with batteries, charger, and carry case, it offers a practical and cost-effective solution for professional installers. We have sold over 400 sets of MacPress Jaws in the last 9 months & customer feedback has been amazing - They are the perfect fit for NovoPress ACO102 & ACO103 making this bundle a great value price! PLEASE NOTE: These Jaws are not Official Approved NovoPress as they sell their own version  

Todays Tools Pit Bull Jet Klean Air Duster

The Todays Tools Pit Bull Jet Klean Air Duster is a powerful and versatile cleaning tool designed for removing dust and debris from a wide range of surfaces. With a high-speed 11,000 RPM motor and USB-C rechargeable functionality, it delivers strong, consistent airflow without the need for disposable air cans. Featuring a 2,000mAh battery, it offers reliable performance with extended usage time, making it ideal for workshops, electronics, and general maintenance tasks. Supplied with four attachments and a convenient storage case, it ensures efficient and organised cleaning on the go.

Todays Tools Regular Drip Stopper Bung (Pack of Two) DSR

The Todays Tools Regular Drip Stopper Bung (Pack of Two) DSR is a practical and versatile solution for temporarily sealing small pipework during maintenance, repairs or flushing operations. Supplied as a pair, these drip stopper bungs are suitable for pipes with diameters between 5 mm and 22 mm, providing a tight and reliable seal to prevent unwanted drips and leaks. Lightweight and easy to use, they help reduce water wastage, protect work areas and make servicing tasks quicker and cleaner for plumbers, heating engineers and general tradespeople.

ACR Instantor R-Press ⅝ 45 Degree Obtuse Bend PxP (Pack Of 3)

The R-Press ⅝ 45 Degree Obtuse Bend PxP (Pack Of 3) provides a fast, secure, and flame-free method of creating smooth directional changes in refrigeration and air conditioning pipework. Designed with a precision V-profile, it forms a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Manufactured from refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this bend offers long-lasting sealing performance and excellent corrosion resistance. Fully UL 207 certified and cULus listed, it meets stringent industry standards, ensuring safety and reliability in every installation. Suitable for operating pressures up to 48 bar and temperatures between -40°C and 140°C, it is the perfect choice for professional installers who demand both speed and quality.

ACR Instantor R-Press ¾ 45 Degree Obtuse Bend PxP (Pack Of 3)

The R-Press ¾ 45 Degree Obtuse Bend PxP (Pack Of 3) provides a fast, secure, and flame-free method of creating smooth directional changes in refrigeration and air conditioning pipework. Designed with a precision V-profile, it forms a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Manufactured from refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this bend offers long-lasting sealing performance and excellent corrosion resistance. Fully UL 207 certified and cULus listed, it meets stringent industry standards, ensuring safety and reliability in every installation. Suitable for operating pressures up to 48 bar and temperatures between -40°C and 140°C, it is the perfect choice for professional installers who demand both speed and quality.

ACR Instantor R-Press ⅞ 45 Degree Obtuse Bend PxP (Pack Of 3)

The R-Press ⅞ 45 Degree Obtuse Bend PxP (Pack Of 3) provides a fast, secure, and flame-free method of creating smooth directional changes in refrigeration and air conditioning pipework. Designed with a precision V-profile, it forms a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Manufactured from refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this bend offers long-lasting sealing performance and excellent corrosion resistance. Fully UL 207 certified and cULus listed, it meets stringent industry standards, ensuring safety and reliability in every installation. Suitable for operating pressures up to 48 bar and temperatures between -40°C and 140°C, it is the perfect choice for professional installers who demand both speed and quality.

ACR Instantor R-Press 1⅛ 45 Degree Obtuse Bend PxP (Pack Of 2)

The R-Press 1⅛ 45 Degree Obtuse Bend PxP (Pack Of 2) provides a fast, secure, and flame-free method of creating smooth directional changes in refrigeration and air conditioning pipework. Designed with a precision V-profile, it forms a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Manufactured from refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this bend offers long-lasting sealing performance and excellent corrosion resistance. Fully UL 207 certified and cULus listed, it meets stringent industry standards, ensuring safety and reliability in every installation. Suitable for operating pressures up to 48 bar and temperatures between -40°C and 140°C, it is the perfect choice for professional installers who demand both speed and quality.

ACR Instantor R-Press ¼ 45 Degree Obtuse Bend PxP (Pack Of 3)

The R-Press ¼ 45 Degree Obtuse Bend PxP (Pack Of 3) provides a fast, secure, and flame-free method of creating smooth directional changes in refrigeration and air conditioning pipework. Designed with a precision V-profile, it forms a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Manufactured from refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this bend offers long-lasting sealing performance and excellent corrosion resistance. Fully UL 207 certified and cULus listed, it meets stringent industry standards, ensuring safety and reliability in every installation. Suitable for operating pressures up to 48 bar and temperatures between -40°C and 140°C, it is the perfect choice for professional installers who demand both speed and quality.

ACR Instantor R-Press ⅜ 45 Degree Obtuse Bend PxP (Pack Of 3)

The R-Press ⅜ 45 Degree Obtuse Bend PxP (Pack Of 3) provides a fast, secure, and flame-free method of creating smooth directional changes in refrigeration and air conditioning pipework. Designed with a precision V-profile, it forms a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Manufactured from refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this bend offers long-lasting sealing performance and excellent corrosion resistance. Fully UL 207 certified and cULus listed, it meets stringent industry standards, ensuring safety and reliability in every installation. Suitable for operating pressures up to 48 bar and temperatures between -40°C and 140°C, it is the perfect choice for professional installers who demand both speed and quality.

ACR Instantor R-Press ½ 45 Degree Obtuse Bend PxP (Pack Of 3)

The R-Press ½ 45 Degree Obtuse Bend PxP (Pack Of 3) provides a fast, secure, and flame-free method of creating smooth directional changes in refrigeration and air conditioning pipework. Designed with a precision V-profile, it forms a strong mechanical joint without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Manufactured from refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this bend offers long-lasting sealing performance and excellent corrosion resistance. Fully UL 207 certified and cULus listed, it meets stringent industry standards, ensuring safety and reliability in every installation. Suitable for operating pressures up to 48 bar and temperatures between -40°C and 140°C, it is the perfect choice for professional installers who demand both speed and quality.

ACR Instantor R-Press ½ Straight Coupler PxP (Pack Of 5)

The R-Press ½ Straight Coupler PxP (Pack Of 5) delivers a professional, secure, and flame-free connection for refrigeration and air conditioning installations. Made from high-quality refrigerant grade copper (UNS C12200) with a robust HNBR O-ring seal, this straight coupler offers excellent durability and leak resistance under demanding operating conditions. With its UL 207 certification and cULus listing, it meets strict safety and quality standards. Designed for mechanical joint installation, it eliminates the need for nitrogen purging or hot works, reducing on-site risks. Suitable for use in systems operating between -40°C and 140°C, this coupler can withstand pressures of up to 48 bar, making it a trusted choice for installers seeking speed, safety, and reliability.

ACR Instantor R-Press ⅝ Straight Coupler PxP (Pack Of 5)

The R-Press ⅝ Straight Coupler PxP (Pack Of 5) delivers a professional, secure, and flame-free connection for refrigeration and air conditioning installations. Made from high-quality refrigerant grade copper (UNS C12200) with a robust HNBR O-ring seal, this straight coupler offers excellent durability and leak resistance under demanding operating conditions. With its UL 207 certification and cULus listing, it meets strict safety and quality standards. Designed for mechanical joint installation, it eliminates the need for nitrogen purging or hot works, reducing on-site risks. Suitable for use in systems operating between -40°C and 140°C, this coupler can withstand pressures of up to 48 bar, making it a trusted choice for installers seeking speed, safety, and reliability.

ACR Instantor R-Press ¾ Straight Coupler PxP (Pack Of 2)

The R-Press ¾ Straight Coupler PxP (Pack Of 2) delivers a professional, secure, and flame-free connection for refrigeration and air conditioning installations. Made from high-quality refrigerant grade copper (UNS C12200) with a robust HNBR O-ring seal, this straight coupler offers excellent durability and leak resistance under demanding operating conditions. With its UL 207 certification and cULus listing, it meets strict safety and quality standards. Designed for mechanical joint installation, it eliminates the need for nitrogen purging or hot works, reducing on-site risks. Suitable for use in systems operating between -40°C and 140°C, this coupler can withstand pressures of up to 48 bar, making it a trusted choice for installers seeking speed, safety, and reliability.

ACR Instantor R-Press ⅞ Straight Coupler PxP (Pack Of 2)

The R-Press ⅞ Straight Coupler PxP (Pack Of 2) delivers a professional, secure, and flame-free connection for refrigeration and air conditioning installations. Made from high-quality refrigerant grade copper (UNS C12200) with a robust HNBR O-ring seal, this straight coupler offers excellent durability and leak resistance under demanding operating conditions. With its UL 207 certification and cULus listing, it meets strict safety and quality standards. Designed for mechanical joint installation, it eliminates the need for nitrogen purging or hot works, reducing on-site risks. Suitable for use in systems operating between -40°C and 140°C, this coupler can withstand pressures of up to 48 bar, making it a trusted choice for installers seeking speed, safety, and reliability.

ACR Instantor R-Press 1⅛ Straight Coupler PxP (Pack Of 2)

The R-Press 1⅛ Straight Coupler PxP (Pack Of 2) delivers a professional, secure, and flame-free connection for refrigeration and air conditioning installations. Made from high-quality refrigerant grade copper (UNS C12200) with a robust HNBR O-ring seal, this straight coupler offers excellent durability and leak resistance under demanding operating conditions. With its UL 207 certification and cULus listing, it meets strict safety and quality standards. Designed for mechanical joint installation, it eliminates the need for nitrogen purging or hot works, reducing on-site risks. Suitable for use in systems operating between -40°C and 140°C, this coupler can withstand pressures of up to 48 bar, making it a trusted choice for installers seeking speed, safety, and reliability.

ACR Instantor R-Press ¼ Straight Swivel Union PxFPT (Pack Of 4)

The R-Press ¼ Straight Swivel Union PxFPT (Pack Of 4) offers a secure, flame-free, and time-saving solution for refrigeration and air conditioning connections. Designed with a V-profile for precision and reliability, this swivel union allows a copper-to-female pipe thread connection without the need for hot works. Manufactured from refrigerant grade copper (UNS C12200) and equipped with a durable HNBR O-ring, it ensures excellent sealing performance under demanding conditions. UL 207 certified and cULus listed, it meets strict quality and safety standards. Suitable for temperatures from -40°C to 140°C and pressures up to 48 bar, it’s ideal for professional installers looking to save up to 35% installation time compared to brazing methods.

ACR Instantor R-Press ⅜ Straight Swivel Union PxFPT (Pack Of 4)

The R-Press ⅜ Straight Swivel Union PxFPT (Pack Of 4) offers a secure, flame-free, and time-saving solution for refrigeration and air conditioning connections. Designed with a V-profile for precision and reliability, this swivel union allows a copper-to-female pipe thread connection without the need for hot works. Manufactured from refrigerant grade copper (UNS C12200) and equipped with a durable HNBR O-ring, it ensures excellent sealing performance under demanding conditions. UL 207 certified and cULus listed, it meets strict quality and safety standards. Suitable for temperatures from -40°C to 140°C and pressures up to 48 bar, it’s ideal for professional installers looking to save up to 35% installation time compared to brazing methods.

ACR Instantor R-Press ½ Straight Swivel Union PxFPT (Pack Of 2)

The R-Press ½ Straight Swivel Union PxFPT (Pack Of 2) offers a secure, flame-free, and time-saving solution for refrigeration and air conditioning connections. Designed with a V-profile for precision and reliability, this swivel union allows a copper-to-female pipe thread connection without the need for hot works. Manufactured from refrigerant grade copper (UNS C12200) and equipped with a durable HNBR O-ring, it ensures excellent sealing performance under demanding conditions. UL 207 certified and cULus listed, it meets strict quality and safety standards. Suitable for temperatures from -40°C to 140°C and pressures up to 48 bar, it’s ideal for professional installers looking to save up to 35% installation time compared to brazing methods.

ACR Instantor R-Press ⅝ Straight Swivel Union PxFPT (Pack Of 2)

The R-Press ⅝ Straight Swivel Union PxFPT (Pack Of 2) offers a secure, flame-free, and time-saving solution for refrigeration and air conditioning connections. Designed with a V-profile for precision and reliability, this swivel union allows a copper-to-female pipe thread connection without the need for hot works. Manufactured from refrigerant grade copper (UNS C12200) and equipped with a durable HNBR O-ring, it ensures excellent sealing performance under demanding conditions. UL 207 certified and cULus listed, it meets strict quality and safety standards. Suitable for temperatures from -40°C to 140°C and pressures up to 48 bar, it’s ideal for professional installers looking to save up to 35% installation time compared to brazing methods.

ACR Instantor R-Press ¾ Straight Swivel Union PxFPT (Pack Of 2)

The R-Press ¾ Straight Swivel Union PxFPT (Pack Of 2) offers a secure, flame-free, and time-saving solution for refrigeration and air conditioning connections. Designed with a V-profile for precision and reliability, this swivel union allows a copper-to-female pipe thread connection without the need for hot works. Manufactured from refrigerant grade copper (UNS C12200) and equipped with a durable HNBR O-ring, it ensures excellent sealing performance under demanding conditions. UL 207 certified and cULus listed, it meets strict quality and safety standards. Suitable for temperatures from -40°C to 140°C and pressures up to 48 bar, it’s ideal for professional installers looking to save up to 35% installation time compared to brazing methods.

ACR Instantor R-Press ¼ Straight Coupler PxP (Pack Of 5)

The R-Press ¼ Straight Coupler PxP (Pack Of 5) delivers a professional, secure, and flame-free connection for refrigeration and air conditioning installations. Made from high-quality refrigerant grade copper (UNS C12200) with a robust HNBR O-ring seal, this straight coupler offers excellent durability and leak resistance under demanding operating conditions. With its UL 207 certification and cULus listing, it meets strict safety and quality standards. Designed for mechanical joint installation, it eliminates the need for nitrogen purging or hot works, reducing on-site risks. Suitable for use in systems operating between -40°C and 140°C, this coupler can withstand pressures of up to 48 bar, making it a trusted choice for installers seeking speed, safety, and reliability.

ACR Instantor R-Press ⅜ Straight Coupler PxP (Pack Of 5)

The R-Press ⅜ Straight Coupler PxP (Pack Of 5) delivers a professional, secure, and flame-free connection for refrigeration and air conditioning installations. Made from high-quality refrigerant grade copper (UNS C12200) with a robust HNBR O-ring seal, this straight coupler offers excellent durability and leak resistance under demanding operating conditions. With its UL 207 certification and cULus listing, it meets strict safety and quality standards. Designed for mechanical joint installation, it eliminates the need for nitrogen purging or hot works, reducing on-site risks. Suitable for use in systems operating between -40°C and 140°C, this coupler can withstand pressures of up to 48 bar, making it a trusted choice for installers seeking speed, safety, and reliability.

MacDonald Plumbing Supplies MacPress M-Profile Press Tool Kit MP-1930 (15mm – 35mm)

The M-Profile Press Tool Kit MP-1930 is a lightweight, high-performance mini press tool designed for copper, stainless steel, PEX, and multilayer pipes. Supplied in a tough carry case, this professional-grade tool comes complete with 15mm, 22mm, 28mm, and 35mm M-profile jaws, two powerful batteries, and a fast charger. The MP-1930 uses a direct drive motor system—without hydraulics—offering efficient pressing action, minimal maintenance, and fast press cycles of 2–4 seconds. Its inline grip and optional 180º jaw adaptor make it ideal for working in tight or awkward spaces. Brushless motor technology ensures a long runtime and quick 40-minute charge.   For more information, please follow the link here.   For technical specifications, please follow the link here.  

MacDonald Plumbing Supplies MacPump 3 Speed Domestic Circulating Pump - 25/6-130

The MacPump 3 Speed Domestic Circulating Pump - 25/6-130 is a reliable and energy-efficient solution for circulating water in domestic heating systems. Designed for use in radiator circuits, hot water systems, and underfloor heating, it features a 3-speed manual setting for flexible control of flow rates. With a 6m head and simple plug-and-pump installation, it offers dependable performance and ease of use.

BritTherm Сirculator Pump S4 Series S4 25/4-180 (661999403)

The BritTherm S4 25/4-180 Circulator Pump offers intelligent circulation for potable water systems, designed with a longer 180mm body and 1" BSP connections. With 9 smart operating modes including AUTO, constant pressure, and proportional pressure settings, this pump ensures efficient, reliable performance tailored to system demand. It’s housed in durable stainless steel and features electrical and thermal protection for long-term safety. The BritTherm Circulator Pump S4 25/4-180 is built for installers and engineers looking for efficiency, flexibility, and dependability in potable water circulation. Its extended 180mm length makes it ideal for replacing pumps in systems with longer fixing centres. With nine intelligent operating modes, including energy-saving AUTO and Night Mode, the pump dynamically adjusts to varying flow demands without manual recalibration. It features three “Old School” fixed-speed settings, two constant pressure (CP1, CP2), and two proportional pressure (PP1, PP2) modes for advanced control. Constructed with an EN1.4521 stainless steel casing, it’s safe for potable water use and protected against overheating and electrical faults. Whether you're fitting new or retrofitting existing pipework, this pump is a top-tier solution.   Features & Benefits: ✅ 180mm pump length with 1" BSP connections ✅ Hygienic EN1.4521 stainless steel construction ✅ 9 smart operation modes including AUTO and Night Mode ✅ Classic 3-speed manual control option ✅ Constant pressure settings: CP1 & CP2 ✅ Proportional pressure settings: PP1 & PP2 ✅ Night Mode lowers energy use to 5W ✅ Built-in electrical and thermal protection ✅ Ideal for potable water circulation systems ✅ Excellent for both domestic and light commercial use

BritTherm Сirculator Pump B3 Series B3 25/4-130 (661996902)

The BritTherm B3 25/4-130 Circulator Pump is a high-efficiency, smart pump designed for potable water circulation and recirculation systems. It features 9 built-in intelligent operating modes, including AUTO, constant and proportional pressure settings, three fixed speeds, and an energy-saving night mode. This model is ideal for a range of domestic and light commercial applications. A simple one-button interface makes operation straightforward, while built-in electrical and thermal protection ensures safety and reliability in all conditions. Designed for modern water circulation systems, the BritTherm Circulator Pump B3 Series B3 25/4-130 offers intuitive functionality with nine intelligent modes to meet diverse system requirements. AUTO mode dynamically selects the most efficient setting based on current demand, while CP1 and CP2 maintain constant pressure across varying flow rates. PP1 and PP2 automatically adjust pressure in proportion to changes in flow, providing tailored performance. Three traditional fixed-speed settings are available for manual control, and night mode reduces power usage to just 5 watts during low-demand periods. With electrical and thermal protection included, the pump defends against overheating and voltage issues. Its 130mm length makes it compact and installation-friendly, perfect for space-conscious environments.   Features & Benefits: ✅ 9 intelligent modes including AUTO, CP1, CP2, PP1, and PP2 ✅ Night mode reduces energy usage to just 5W ✅ Three fixed speeds for manual operation ✅ Easy-to-use single-button interface ✅ Constant and proportional pressure settings ✅ Smart adaptability to flow rate and system demands ✅ Compact 130mm body for straightforward fitting ✅ Electrical and thermal protection built in ✅ Ideal for domestic or light commercial use ✅ Optimised for potable water circulation and recirculation

BritTherm Automatic Сirculator Pump P5 Series P5 25/4-130 (661995702)

The BritTherm P5 25/4-130 Circulator Pump is the ideal choice for smaller heating systems or applications requiring lower head pressure. With a compact 130mm body and 25mm connections, it’s perfect for tight installations such as HIUs, combi boilers, or zoned circuits. Despite its modest 4-metre head, it offers all the intelligent features of the P5 Series: 10 operating modes, including AUTO, constant and proportional pressure settings, as well as three fixed speeds. Dual PWM control and built-in night mode ensure full smart system compatibility and energy efficiency. Compact yet powerful, the BritTherm P5 25/4-130 is engineered for domestic heating systems that demand space efficiency without sacrificing smart control. With a 4-metre head height and 25mm connection, it’s ideal for applications such as HIUs, hot water recirculation, and small heating loops. The pump is equipped with dual PWM inputs (GT and ST), allowing remote control integration with thermostats and controllers including Siemens, Honeywell, and others. It delivers 10 different operation modes to suit a wide variety of heating scenarios—from constant or proportional pressure for underfloor heating to fixed-speed options for traditional setups. Its AUTO mode simplifies installation, automatically selecting the best settings for 80% of systems. The Automatic Night Power Reduction Function reduces electricity use to just 5 watts when heating is not required, contributing to lower energy bills. Electrical and thermal protection ensures safety and reliability, making the P5 25/4-130 a dependable solution for modern heating systems.   Features & Benefits: ✅ 4-metre head height—perfect for compact heating setups ✅ 25mm connection size with 130mm body length ✅ PWM GT & ST inputs for thermostat/controller integration ✅ AUTO mode fits 80% of domestic heating systems ✅ Constant pressure (CP1, CP2) for stable flow systems ✅ Proportional pressure (PP1, PP2) for dynamic flow changes ✅ Three traditional fixed-speed settings for manual control ✅ 5W night mode for energy saving without comfort loss ✅ Full electrical and thermal safety features included ✅ Compatible with heat pumps, boilers, and HIUs

BritTherm Automatic Сirculator Pump P5 Series P5 25/5-130 (661995706)

The BritTherm P5 25/5-130 Circulator Pump is a high-efficiency, intelligent solution for domestic heating systems, including boilers, HIUs, and hot water loops. Featuring a 5-metre head and standard 130mm body, it fits most modern installations with ease. With 10 operation modes, dual PWM control, and an energy-saving night function, this pump is ideal for systems requiring adaptive pressure and speed control. It’s compatible with popular thermostat brands and offers a smart, safe, and reliable heating upgrade. The BritTherm P5 25/5-130 Circulator Pump delivers robust performance and intelligent operation, suited for a wide variety of heating system configurations. With a 5-metre head height and 25mm connections, it’s well-matched for zoned central heating, hot water recirculation, and underfloor heating circuits. The unit includes 10 built-in control modes that cater to varied system needs: AUTO mode for general use, constant pressure settings (CP1 and CP2) for steady-flow systems, and proportional pressure modes (PP1 and PP2) for systems where flow demand varies. It also offers three fixed speeds for legacy system compatibility. Dual PWM terminals (GT and ST) allow integration with smart thermostats from trusted brands like Siemens and Honeywell. The night mode reduces power usage to only 5 watts, cutting energy bills without compromising comfort. Protection features include advanced electrical and thermal safeguards that enhance pump durability and shield it from system-related faults, delivering confidence and longevity for the installer and homeowner alike.   Features & Benefits: ✅ Compact 130mm body for easy installation ✅ 5-metre head ideal for small to medium heating circuits ✅ 25mm ports for standard domestic systems ✅ Dual PWM control inputs for remote integration ✅ AUTO mode handles 80% of household setups ✅ Constant & proportional pressure settings for precision control ✅ Legacy three-speed mode for older systems ✅ Night-time power reduction down to 5W ✅ Thermal and electrical protection built in ✅ Compatible with Siemens, Honeywell, and other major controllers

BritTherm Automatic Сirculator Pump P5 Series P5 25/7-130 (661995714)

The BritTherm P5 25/7-130 Circulator Pump is engineered for efficient HVAC use in boilers, heat pumps, and HIUs. Designed to deliver a 7-metre head with a compact 130mm body length, this pump incorporates advanced PWM control functions for seamless integration with major thermostats like Siemens and Honeywell. It provides 10 versatile automatic operation modes, ensuring optimal performance and energy savings for various domestic heating systems. The BritTherm P5 25/7-130 Circulator Pump offers a dependable solution for heating systems requiring a moderate 7-metre head. Its 130mm length allows for easy installation in tight spaces while maintaining robust performance. Ideal for a wide range of domestic heating setups, the pump is suitable for use with boilers, heat pumps, and heat interface units (HIUs). Featuring two unique PWM functions (GT and ST), this pump supports remote control via two low-voltage cables, compatible with a variety of controllers and thermostats such as Siemens and Honeywell. It provides 10 automatic modes, including an easy-to-use AUTO mode that suits 80% of heating systems, constant pressure modes tailored for underfloor heating, and proportional pressure modes for systems with varying flow demands. The pump also includes three traditional fixed speeds for simpler systems and an automatic night-time power reduction mode, which lowers energy consumption to just 5 watts without compromising heating performance. With built-in electrical and thermal protection, the BritTherm P5 25/7-130 is designed to withstand external electrical faults, ensuring long-term reliability and safety.   Features & Benefits: ✅ 7-metre head suitable for medium-pressure heating systems ✅ Compact 130mm length fits most installations ✅ 25mm connection ports compatible with standard pipework ✅ AUTO mode for quick, user-friendly operation ✅ Two constant pressure modes for stable flow rates ✅ Two proportional pressure modes for variable flow systems ✅ Three fixed-speed options for traditional setups ✅ Night power reduction lowers energy use to 5W ✅ Dual PWM inputs (GT and ST) for smart controller integration ✅ Electrical and thermal safety protections extend pump life ✅ Compatible with Siemens, Honeywell, and other controllers

BritTherm Automatic Сirculator Pump P5 Series P5 25/8-130 (661995718)

The BritTherm P5 25/8-130 Circulator Pump is expertly engineered for HVAC systems, including boilers, heat pumps, and heat interface units (HIUs). Offering an 8-metre head and a compact 130mm body length, this pump includes two PWM control functions (GT and ST) for seamless integration with popular controllers such as Siemens and Honeywell. With 10 automatic operating modes, it delivers versatile, energy-efficient performance for a broad range of domestic heating applications. The BritTherm P5 25/8-130 Circulator Pump provides reliable and flexible heating system circulation with an 8-metre head, ideal for moderately high-pressure needs in boilers, heat pumps, and HIUs. Its 130mm length design fits neatly into many installation environments while maintaining robust performance. This pump incorporates two unique PWM functions (GT and ST), enabling remote operation via two low-voltage cables compatible with a wide variety of controllers and thermostats, including Siemens and Honeywell models. With 10 automatic modes, including the simple AUTO mode for quick commissioning across 80% of heating systems, the pump adapts easily to different system demands. It features two constant pressure modes tailored for underfloor heating or stable flow systems and two proportional pressure modes for systems with variable flow rates. Additionally, three fixed speed modes offer manual control options for more traditional setups. An energy-saving night mode reduces power consumption to just 5 watts without sacrificing heating performance. Electrical and thermal protection features guard the pump against damage caused by external faults, ensuring long-lasting, reliable operation.   Features & Benefits: ✅ 8-metre head for higher-pressure heating system demands ✅ Compact 130mm length for versatile installation ✅ Standard 25mm pipe connections ✅ Easy AUTO mode for rapid system commissioning ✅ Two constant pressure modes for steady-flow systems ✅ Two proportional pressure modes for variable flow rate systems ✅ Three fixed-speed settings for manual control ✅ Night power reduction to 5 watts for energy efficiency ✅ Dual PWM control (GT and ST) compatible with Siemens, Honeywell, and more ✅ Electrical and thermal protection for enhanced durability

BritTherm Automatic Сirculator Pump P5 Series P5 32/6-180 (661995712)

The BritTherm P5 32/6-180 Circulator Pump is engineered for HVAC systems including boilers, heat pumps, and HIUs. Featuring a 6-metre head and 32mm connections, it offers reliable pressure and flow for domestic heating applications. Its two PWM control functions allow remote operation via low-voltage cables, compatible with popular thermostats such as Siemens and Honeywell. With 10 automatic modes and energy-saving features, it adapts seamlessly to various heating system demands. The BritTherm P5 32/6-180 Circulator Pump is a high-performance pump designed to meet the needs of modern HVAC systems, including boiler circuits, heat pumps, and heat interface units (HIUs). Its robust 32mm pipe connections and 6-metre head make it suitable for systems requiring higher pressure and flow. This pump features two unique PWM functions (GT and ST), allowing remote control through two low-voltage cables, making it compatible with a wide range of controllers and thermostats, including Siemens and Honeywell. Users benefit from 10 automatic operation modes: AUTO mode enables quick, one-button activation for around 80% of heating systems. Two Constant Pressure Modes (CP1 and CP2) optimise performance in underfloor heating and systems with stable flow rates. Two Proportional Pressure Modes (PP1 and PP2) adapt to systems with dynamic flow changes. Three fixed speed options provide manual control over the entire power range. The pump also includes an automatic night power reduction function, lowering energy use to just 5 watts without compromising heating performance. Electrical and thermal protection systems safeguard the pump from failures due to external conditions, enhancing durability and reliability.   Features & Benefits: ✅ 32mm connections for dependable flow rates ✅ 6-metre head for higher pressure systems ✅ 180mm installation length for versatile fit ✅ One-button AUTO mode for simple setup ✅ Constant pressure modes suited for underfloor heating ✅ Proportional pressure modes for fluctuating flow systems ✅ Three fixed speed settings for manual control ✅ Energy-saving night mode reduces power consumption to 5W ✅ Dual PWM control compatible with Siemens, Honeywell, and more ✅ Electrical and thermal protections prevent damage from external factors

BritTherm Automatic Сirculator Pump P5 Series P5 32/7-180 (661995716)

The BritTherm P5 32/7-180 Circulator Pump is a versatile pump designed for HVAC applications such as boilers, heat pumps, and heat interface units (HIUs). It features a 7-metre head and 32mm connections, providing reliable performance for domestic heating systems. With two unique PWM control modes compatible with major thermostats like Siemens and Honeywell, this pump offers 10 automatic operation modes for adaptable and efficient heating control, including an energy-saving night mode. The BritTherm P5 32/7-180 Circulator Pump is built to deliver efficient and adaptable performance in a wide range of heating systems, including boilers, heat pumps, and HIUs. Designed with 32mm pipe connections and a 7-metre head, it is well-suited to systems requiring higher pressure and consistent flow rates. This pump incorporates two unique PWM functions (GT and ST) for remote control via two low-voltage control cables. This feature ensures compatibility with a broad selection of controllers and thermostats, including popular brands like Siemens and Honeywell. It offers 10 automatic operation modes tailored to meet various system demands: AUTO mode provides a simple one-button start suitable for approximately 80% of heating systems. Two Constant Pressure Modes (CP1 and CP2) are ideal for underfloor heating and systems with stable flow requirements. Two Proportional Pressure Modes (PP1 and PP2) adapt to systems with more variable flow demands. Three fixed speed settings allow manual control over the full power range. An automatic night power reduction function decreases energy use to just 5 watts during low demand periods, without compromising heating quality. Electrical and thermal protections safeguard the pump against damage caused by external influences, ensuring long-lasting reliability.   Features & Benefits: ✅ 32mm connections for steady flow rates ✅ 7-metre head suitable for higher pressure requirements ✅ 180mm installation length for versatile fitting ✅ One-button AUTO mode for quick and easy setup ✅ Constant pressure modes perfect for underfloor heating ✅ Proportional pressure modes for systems with changing flow rates ✅ Three fixed speeds for manual operation ✅ Energy-saving night mode reduces consumption to 5W ✅ PWM remote control compatible with Siemens, Honeywell, and more ✅ Electrical and thermal protections to prevent pump damage

BritTherm Automatic Сirculator Pump P6 Series P6 32/12-180 (661995804)

The BritTherm P6 32/12-180 is a high-performance circulation pump engineered for demanding HVAC installations. With a powerful 12-metre head and large 32mm connections, it handles high-volume systems with ease. This advanced model includes 10 automatic modes and twin PWM functions, ensuring compatibility with smart thermostats and delivering maximum energy efficiency. Ideal for underfloor heating and complex systems, it balances performance with reliable protection. Designed for installers seeking maximum flow and versatility, the BritTherm P6 32/12-180 offers a standout 12m head height and 32mm bore, making it ideal for large underfloor heating arrays and multi-zone radiator systems. Its 10 automatic modes cover every installation scenario, from constant and proportional pressure to manual speed settings. With integrated GT and ST PWM control, this pump seamlessly connects to smart thermostats and controllers from brands like Siemens and Honeywell. Energy-saving AUTO and night modes ensure lower running costs without compromising performance. It also includes robust thermal and electrical protection, providing long-lasting safety in any domestic heating setup.   Features & Benefits: ✅ 12m head height for large, multi-zone systems ✅ 32mm ports allow high flow capacity ✅ AUTO Mode fits 80% of heating setups ✅ Constant & proportional pressure modes for fine control ✅ Three-speed manual settings for traditional setups ✅ Dual PWM control (GT & ST) for remote integration ✅ Compatible with Siemens, Honeywell, and more ✅ Energy-efficient with night mode functionality ✅ Built-in electrical and thermal protection ✅ Ideal for demanding underfloor and radiator systems

BritTherm Automatic Сirculator Pump P6 Series P6 32/15-180 (661995806)

The BritTherm P6 32/15-180 is the most powerful model in the P6 Series, delivering a massive 15-metre head for the most demanding central heating and underfloor systems. With 32mm connections, 10 operational modes and dual PWM compatibility, this pump offers smart control and exceptional performance. Ideal for commercial-scale or complex domestic installations, it provides robust flow, enhanced safety, and effortless automation. For installations requiring unmatched power and reliability, the BritTherm P6 32/15-180 is a high-output solution tailored to modern heating systems. With its 15m head height, this 180mm pump easily supports extended pipe runs and multi-zone underfloor heating or radiator circuits. It comes equipped with 10 selectable modes, including constant and proportional pressure settings, and three fixed-speed options for legacy systems. Its dual PWM control modes (GT and ST) allow remote operation with leading thermostats and controllers, including Siemens, Honeywell and others. Electrical and thermal protections are built-in to prevent damage from system faults or overheating. Whether you’re fitting a high-volume domestic system or light commercial heating, this pump ensures consistent, efficient circulation.   Features & Benefits: ✅ Massive 15m head for large or multi-zone systems ✅ 32mm ports for high-volume water flow ✅ AUTO Mode suits 80% of heating applications ✅ Constant and proportional pressure modes for system tuning ✅ Three fixed-speed options for traditional control ✅ Dual PWM (GT & ST) compatible with major brands ✅ Ideal for smart thermostats and controllers ✅ Integrated electrical and thermal safety features ✅ Quiet, efficient motor reduces running costs ✅ Designed for large HVAC and underfloor systems

BritTherm Automatic Сirculator Pump P7 Series P7 25/10-180 (661995903)

The BritTherm P7 25/10-180 circulator pump is a robust, high-efficiency solution for commercial heating systems, including large residential installations and complex underfloor circuits. Engineered with permanent magnet motor technology and a compact rotor, this pump offers quiet operation, excellent energy efficiency, and advanced control. With 13 automatic operation modes and self-ventilated design, it delivers dependable performance for demanding environments. The BritTherm P7 25/10-180 represents a significant leap forward in circulator pump performance for commercial and high-demand residential systems. Its 180mm length and 25mm connections ensure it fits standard installations while delivering reliable output with a maximum head of 10 metres. This P7 model features an expanded set of 13 control modes, including four constant pressure settings (CP2–CP5), four proportional pressure options (PP2–PP5), and four constant rotor speed selections, plus the one-touch AUTO mode for universal compatibility. The P7 series also benefits from automatic night power reduction to just 5W, reducing energy use without sacrificing heating efficiency. Thanks to a self-ventilated body and integrated thermal and electrical protection, this pump ensures longevity, minimal maintenance, and uninterrupted performance even in challenging systems.   Features & Benefits: ✅ Permanent magnet motor for high efficiency ✅ Quiet operation with compact rotor design ✅ 13 advanced control modes for versatile applications ✅ AUTO mode for plug-and-play setup ✅ 4x Constant Pressure & 4x Proportional Pressure settings ✅ 4x Fixed rotor speeds for traditional control ✅ Energy-saving night mode reduces consumption to 5W ✅ Self-ventilated casing prevents air ingress ✅ Full thermal & electrical protection built-in ✅ Ideal for commercial and large domestic heating

BritTherm Automatic Сirculator Pump P3 Series P3 25/7-130 (661995514)

The BritTherm P3 25/7-130 Circulator Pump delivers powerful water circulation for domestic heating systems with a high-performance 7-metre head. Designed with a compact 130mm body, it fits easily into tight spaces while offering nine versatile operation modes, including AUTO, constant pressure, proportional pressure, and fixed-speed settings. Its night mode drops energy use to just 5 watts, combining power with energy efficiency. Engineered for domestic heating systems requiring higher head performance, the BritTherm P3 25/7-130 Circulator Pump features a 25mm connection size, a 7-metre head, and a compact 130mm body for easy installation—even in restricted spaces. It offers nine user-selectable operation modes designed to optimise performance and energy efficiency. With AUTO mode, the pump adapts to your heating system’s needs in real time. Constant pressure settings (CP1 and CP2) and proportional pressure options (PP1 and PP2) allow you to tailor the pump's operation, while the classic three-speed settings give users full manual control when needed. The automatic night mode reduces energy use to just 5 watts without affecting heating performance. Built-in thermal and electrical protection ensures reliable, long-lasting operation even under varying conditions.   Features & Benefits: ✅ 130mm compact body for space-restricted installations ✅ Powerful 7-metre head for enhanced water circulation ✅ 25mm connections for standard pipework ✅ AUTO mode for adaptive performance ✅ CP1 & CP2 constant pressure settings ✅ PP1 & PP2 proportional pressure options ✅ Three manual speed settings ✅ Automatic night mode reduces power to 5 watts ✅ Electrical and thermal safety protection ✅ Ideal for modern and retrofit heating systems

BritTherm Automatic Сirculator Pump P4 Series P4 25/4-180 (661995603)

The BritTherm P4 25/4-180 Circulator Pump offers high performance and installation flexibility for modern HVAC systems. With a 180mm body length and 4-metre head, this 25mm pump is suitable for larger installations, heat interface units, and underfloor heating. Featuring 11 automatic work programmes and PWM remote control compatibility, it adapts to a wide range of heating demands while improving efficiency and control. Designed for demanding domestic and commercial systems, the BritTherm P4 25/4-180 Circulator Pump combines intelligent functionality with exceptional flexibility. Its longer 180mm body makes it ideal for retrofits and systems requiring extended fitting space, while the 25mm connections and 4-metre head ensure reliable circulation across standard heating loops. Equipped with 11 work modes—including AUTO mode, three constant pressure settings (CP1–CP3), and three proportional pressure settings (PP1–PP3)—the pump can automatically adapt to changing flow demands, making it perfect for underfloor heating and zoned systems. Traditional fixed-speed modes are also available for simpler setups. The integrated PWM control interface allows for remote pump frequency management using compatible thermostats such as Siemens and Honeywell, supporting energy-saving smart home installations. Built-in electrical and thermal protection safeguards against system faults and ensures long-term reliability.   Features & Benefits: ✅ 25mm connections with a 4-metre head – ideal for compact and mid-size heating systems ✅ 180mm extended body – suitable for installations needing more reach ✅ 11 intelligent modes including AUTO, constant, and proportional pressure control ✅ PWM interface supports remote control from smart thermostats ✅ Compatible with major brands like Siemens and Honeywell ✅ Excellent for boilers, HIUs, heat pumps, and underfloor heating ✅ AUTO mode adjusts output to system needs automatically ✅ Electrical and thermal protection guards against damage ✅ Night power reduction for energy-efficient operation ✅ Simple user interface for fast setup and configuration

BritTherm Automatic Сirculator Pump P2 Series P2 25/6-180 (661995411)

The BritTherm P2 25/6-180 Circulator Pump delivers advanced performance for domestic and light commercial heating systems. With a 6-metre head, 180mm body length, and nine smart modes including AUTO, constant and proportional pressure, fixed speeds, and night mode, it ensures maximum efficiency and comfort. Ideal for larger installations with 180mm pump spacing. Engineered for optimal flow control and energy efficiency, the BritTherm P2 25/6-180 Circulator Pump is a powerful and adaptable heating solution. It features nine intelligent operation modes, including a one-touch AUTO Mode that dynamically adapts to the system's needs—perfect for around 80% of UK heating setups. Its two Constant Pressure settings (CP1 & CP2) keep pressure stable regardless of changes in flow, while Proportional Pressure modes (PP1 & PP2) optimise energy use by scaling output in line with system demand. For traditional installers, the pump also offers three selectable Fixed Speeds. During reduced usage periods, Night Mode limits power draw to just 5 watts without sacrificing system reliability. A longer 180mm body suits installations where standard 130mm models won’t fit. Built-in electrical and thermal protections safeguard against faults and external disruptions.   Features & Benefits: ✅ 9 operation modes, including smart AUTO Mode ✅ CP1 & CP2 ensure constant pressure performance ✅ PP1 & PP2 adapt to pressure variations for efficiency ✅ Traditional 3-speed manual options ✅ Night Mode saves energy down to 5 watts ✅ Suitable for 25mm pipework with 6m head ✅ Extended 180mm body for wider installation compatibility ✅ Electrical & thermal protection for safe, long-term use

BritTherm Automatic Сirculator Pump P2 Series P2 25/8-180 (661995417)

The BritTherm P2 25/8-180 Circulator Pump is designed to deliver powerful and efficient heating system circulation. Featuring a 25mm connection size and an 8-metre head, it is ideal for medium to larger heating systems requiring reliable flow and pressure. Equipped with nine automatic operating modes including AUTO, constant and proportional pressure settings, plus three manual speeds, it adapts perfectly to system demands. Its energy-saving Night Mode reduces consumption to just 5 watts, and built-in electrical and thermal protection safeguards pump longevity. The BritTherm P2 25/8-180 Circulator Pump combines performance and smart technology to enhance heating system efficiency and comfort. With a 25mm inlet/outlet and 180mm pump body, it fits standard heating setups while providing an impressive 8-metre head for effective water circulation across various system sizes. Its nine built-in modes allow it to intelligently respond to heating system changes. AUTO Mode simplifies use for most systems, while CP1 and CP2 constant pressure modes ensure steady pressure irrespective of flow rate. The PP1 and PP2 proportional pressure modes dynamically adjust pump performance based on system pressure fluctuations. For users preferring manual control, three fixed speed settings provide flexibility. The Night Mode significantly lowers power consumption during off-peak periods without compromising system performance. Electrical and thermal protection features prevent damage from external electrical faults or overheating, ensuring durability and peace of mind. The pump is ideal for modern installations and upgrades requiring smart, energy-efficient circulation.   Features & Benefits: ✅ 25mm connection size, suitable for medium to large systems ✅ 8m head for excellent flow and pressure control ✅ AUTO Mode for easy, adaptive operation ✅ Constant pressure modes (CP1, CP2) for stable system performance ✅ Proportional pressure modes (PP1, PP2) for dynamic adjustment ✅ Three manual fixed speeds for flexible control ✅ Energy-saving Night Mode reduces consumption to 5W ✅ Electrical and thermal protection for added reliability ✅ Suitable for residential and commercial heating systems

BritTherm Automatic Сirculator Pump P1 Series P1 25/5-180 (661995305)

The BritTherm P1 25/5-180 Circulator Pump is designed for optimal performance in larger heating systems requiring a 180mm pump body. Equipped with smart AUTO mode, three manual speed settings, and an energy-saving night function, it intelligently adapts to system demands while keeping energy usage low. With electrical and thermal protection, it ensures reliable, long-lasting operation in both domestic and light commercial environments. The BritTherm Automatic Circulator Pump P1 25/5-180 offers smart, energy-efficient heating control in a robust 180mm format. Ideal for homes and small commercial systems, this model automatically adjusts its performance using intelligent AUTO mode to match real-time system requirements—delivering comfort while reducing energy consumption. Installers can manually select between three fixed-speed settings for tailored control when preferred, and the integrated night-time reduction mode drops power usage to as low as 5 watts when demand is low. With built-in electrical and thermal protection, the pump resists damage from power surges or overheating, ensuring consistent and dependable circulation. The 180mm body provides flexibility for systems that require a longer fitting size, making the P1 25/5-180 a reliable upgrade or replacement choice.   Features & Benefits: ✅ 180mm body ideal for larger heating systems ✅ Smart AUTO mode adapts to system demand ✅ Manual fixed-speed operation with 3 selectable settings ✅ Energy-saving night function reduces power to 5W ✅ Integrated thermal and electrical safety protection ✅ 1" BSP connections for standard system compatibility ✅ Quiet operation with low vibration ✅ Easy one-button interface for quick adjustments

BritTherm Automatic Сirculator Pump P1 Series P1 25/8-180 (661995314)

The BritTherm P1 25/8-180 Automatic Circulator Pump combines advanced functionality with dependable performance. Featuring four built-in operation modes, including an intelligent AUTO Mode, this pump adjusts its speed to suit your heating system’s needs. With night power reduction cutting energy use to just 5 watts and robust safety systems built in, it’s ideal for modern, efficient home heating. The BritTherm Automatic Circulator Pump P1 Series P1 25/8-180 is engineered for versatility and performance in domestic heating systems. This model offers four operational modes, including three fixed speeds for traditional users and a smart AUTO Mode that dynamically adapts to your system’s demand, ensuring optimal comfort and energy efficiency. With a built-in Automatic Night Power Reduction Function, the pump consumes as little as 5 watts during low-usage periods without compromising heating performance. Safety is prioritised through electrical and thermal protection systems that guard against damage from external issues. At 180mm in length, this pump fits seamlessly into most standard heating systems, offering a reliable, easy-to-use solution for energy-conscious homeowners and installers alike.   Features & Benefits: ✅ Intelligent AUTO Mode adjusts to system demand ✅ Three fixed speed settings for manual control ✅ 5W night power mode for reduced energy use ✅ One-button control for easy operation ✅ Built-in thermal and electrical protection ✅ 180mm length fits common heating system setups ✅ Quiet, efficient, and maintenance-friendly

BritTherm Automatic Сirculator Pump P1 Series P1 25/10-130 (661995319)

The BritTherm P1 25/10-130 Circulator Pump delivers high performance with a 10-metre head, perfect for larger or more complex heating systems. Its compact 130mm body fits neatly into tight spaces while offering four built-in operation modes, including an intelligent AUTO mode that optimises pump speed for energy efficiency and comfort. With a low-power night mode and robust electrical and thermal protection, this pump is both reliable and economical for residential or commercial heating applications. Engineered for demanding heating systems, the BritTherm Automatic Circulator Pump P1 25/10-130 combines power with smart energy management. The 10-metre head capability makes it suitable for systems with higher resistance, ensuring consistent and effective circulation of heating fluids. This model features three fixed speeds for manual control and an AUTO mode that intelligently adapts to the heating system’s requirements, balancing performance with minimal energy use. The automatic night power reduction function cuts power consumption down to 5 watts during off-peak periods, helping reduce running costs without sacrificing comfort. Built to last, the pump includes essential electrical and thermal protection systems to guard against damage caused by external factors, enhancing reliability and longevity. Its compact dimensions make installation straightforward, even in restricted spaces.   Features & Benefits: ✅ High 10-metre head for demanding heating systems ✅ Compact 130mm body length with standard 1" BSP connections ✅ Intelligent AUTO mode adjusts pump operation automatically ✅ Three fixed speed settings for manual selection ✅ Night mode reduces power use to 5 watts ✅ Electrical and thermal protection for enhanced durability ✅ Quiet operation suitable for domestic and commercial use ✅ Simple single-button control

MacDonald Plumbing Supplies MacSolder Ring Stop End 35mm

The MacSolder Ring Stop End 35mm is a high-quality copper fitting designed for sealing off the end of a pipe in plumbing and heating systems. Manufactured with lead-free solder and WRAS approved, this stop end is ideal for use with potable water, central heating, and gas systems. The integrated pre-soldered ring allows for fast and secure connections without the need for additional solder, reducing installation time and ensuring a clean, professional finish. This 35mm stop end is particularly useful in tight spaces and is a cost-effective solution for residential or commercial plumbing projects.

MacDonald Plumbing Supplies MacSolder Ring Stop End 42mm

The MacSolder Ring Stop End 42mm is a high-quality copper fitting designed for sealing off the end of a pipe in plumbing and heating systems. Manufactured with lead-free solder and WRAS approved, this stop end is ideal for use with potable water, central heating, and gas systems. The integrated pre-soldered ring allows for fast and secure connections without the need for additional solder, reducing installation time and ensuring a clean, professional finish. This 42mm stop end is particularly useful in tight spaces and is a cost-effective solution for residential or commercial plumbing projects.

MacDonald Plumbing Supplies MacSolder Ring Stop End 54mm

The MacSolder Ring Stop End 54mm is a high-quality copper fitting designed for sealing off the end of a pipe in plumbing and heating systems. Manufactured with lead-free solder and WRAS approved, this stop end is ideal for use with potable water, central heating, and gas systems. The integrated pre-soldered ring allows for fast and secure connections without the need for additional solder, reducing installation time and ensuring a clean, professional finish. This 54mm stop end is particularly useful in tight spaces and is a cost-effective solution for residential or commercial plumbing projects.

MacDonald Plumbing Supplies MacPress U Profile Jaw 16mm For PZ-1930 & MP-1930

The MacPress U Profile Jaw 16mm For PZ-1930 & MP-1930 is designed for creating accurate and reliable press connections on 16 mm multilayer pipe systems. This jaw plugs directly into the PZ-1930 & MP-1930 press tool and locks securely using the swivel pin, allowing quick and simple changes between pipe sizes during installation. Ideal for applications where a dependable, leak-free joint is essential, it offers speed, convenience and consistent performance across a wide range of MLCP projects.   For more information, please follow the link here Compatibility information, please follow the link here

FRANKISCHE MLCP Alpex-Duo XS PE-Xb/Al/PE-RT 16 x 2mm x 500m

The FRANKISCHE MLCP Alpex-Duo XS PE-Xb/Al/PE-RT 16 x 2mm x 500m is a high-performance multilayer composite pipe designed for large-scale plumbing and heating installations. Featuring a PE-Xb inner layer, aluminium core, and PE-RT outer layer, it delivers excellent strength, hygiene, and thermal resistance. Supplied in an extended 500m coil, it is ideal for major projects where maximum efficiency, minimal joints, and rapid installation are required.

MacDonald Plumbing Supplies MacPress TH Profile Jaw 20mm For PZ-1550

The MacPress TH Profile Jaw 20mm For PZ-1550 is a precision engineered jaw designed for installers working with TH profile multilayer and MLCP fittings. Built for use exclusively with the PZ-1550 press tool when fitted with the appropriate head adaptor, it delivers accurate and secure press connections for 20mm pipework. Manufactured for durability and consistent performance, this jaw supports reliable hot and cold water installations across domestic, commercial and industrial environments. Its quick change compatibility helps speed up workflow when switching between pipe sizes on site.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPlumb Bar Shower Fixing Plate

The MacPlumb Bar Shower Fixing Plate is designed to simplify and speed up the installation of bar shower mixers during first fix plumbing work. Suitable for 15mm pipework, it ensures accurate 150mm pipe centres, allowing compatibility with the vast majority of bar shower valves. Manufactured with durable brass fittings, this fixing plate provides a strong and reliable mounting solution while reducing installation time and improving alignment accuracy. Ideal for both professional plumbers and DIY installers, it delivers a secure and efficient installation every time.

Instantor 771928 Universal Pump Head Replacement Kit - 8 Metre with Wilo PWM Adaptor Cable

The Instantor Universal Pump Head Replacement Kit (771928) is an 8-metre, high-performance, energy-efficient replacement solution compatible with various boiler systems. This modulating pump, complete with a Wilo PWM adaptor cable, offers flexible control settings to maximise boiler efficiency. Its features include a 31.6L/min flow rate, multiple pressure modes, and eco-friendly operation. This pump kit also includes all necessary accessories for simple installation and is compliant with ErP energy standards.

Instantor 771929 Universal Pump Head Replacement Kit - 8 Metre CCW with Grundfos Adaptor Cable

The Instantor Universal Pump Head Replacement Kit – 8 Metre CCW (771948) with Wilo and Grundfos adaptor cables provides a high-performance solution for various heating systems. This modulating pump offers control flexibility with multiple settings and pulse width modulation (PWM) compatibility. Designed for easy retrofit in most applications, it enhances boiler efficiency, delivering a quiet, energy-efficient operation with an Energy Efficiency Index (EEI) of ≤ 0.23. The kit includes all necessary installation components and is fully ErP compliant.

MacDonald Plumbing Supplies MacPress M Profile Jaw 15mm For PZ-1930 & MP-1930

The MacPress M Profile Jaw 15mm For PZ-1930 & MP-1930 is a high quality pressing jaw designed for reliable, consistent performance on 15mm pipe and fittings. Built for precision, it locks directly into the PZ-1930 & MP-1930 press tool using a quick release mechanism that allows installers to switch jaws effortlessly on site. This 15mm M profile jaw is engineered to deliver secure, repeatable press joins, helping installers achieve a professional finish with minimal effort. Its durable construction makes it suitable for daily trade use, offering a dependable solution for efficient installation work.   For more information, please follow the link here Compatibility information, please follow the link here

MacDonald Plumbing Supplies MacPump 3 Speed Domestic Circulating Pump - 25/6-130

The MacPump 3 Speed Domestic Circulating Pump - 25/6-130 is a reliable and energy-efficient solution for circulating water in domestic heating systems. Designed for use in radiator circuits, hot water systems, and underfloor heating, it features a 3-speed manual setting for flexible control of flow rates. With a 6m head and simple plug-and-pump installation, it offers dependable performance and ease of use.

MacDonald Plumbing Supplies MacPump 1½ "A" Rated Circulating Pump

The MacPump 1½" “A” Rated Circulating Pump is a high-efficiency solution designed for domestic heating and hot water systems. Featuring a permanent magnet motor and intelligent differential pressure control, it automatically adjusts performance to suit system demand. With both variable and fixed speed settings, a 6m head, and A-rated energy efficiency, it delivers reliable performance while helping to reduce energy consumption.

Novopress ACO203 Tool C/W Case (2 x 2Ah Bat & Charger & M15, M22, M28, & M35 Jaws)

The Novopress ACO203 Tool Kit is a high-performance, compact press-fitting solution ideal for professional plumbers and installers. This complete kit includes the powerful ACO203 pressing tool, two 2Ah lithium-ion batteries, a rapid charger, a durable carry case, and four M-Profile press jaws: M15, M22, M28, and M35. Built for demanding work environments, the ACO203 ensures precision pressing, improved workflow, and extended runtime between charges. Designed for comfort, speed, and long-lasting reliability, this cordless tool is perfect for copper, stainless steel, and multilayer piping systems.

NovoPress ACO103 c/w Genuine M15, M22, M28 & M35 Profile Jaws

The Novopress ACO103 Tool Kit is a compact, high-efficiency pressing solution ideal for professionals who demand precision and reliability. Supplied with M15, M22, M28, and M35 jaws, two 2Ah batteries, and a charger, this complete set is ready for action. With Bluetooth® connectivity, illuminated press area, and a user-friendly LED display, the ACO103 delivers enhanced productivity across metal (up to 35mm) and plastic (up to 40mm) pipe installations.  

MacDonald Plumbing Supplies MacPack Press Starter Kit For Gas

Top up your MacPress fitting stock with the MacPack Press Refill Pack For Water – 15mm Fittings, designed for professional installers who value speed, safety, and simplicity. This refill pack includes 105 premium-quality 15mm M Profile press fittings for water applications – all neatly stored in a robust FatMac case for easy access on-site. Suitable for potable water, heating, and hot water systems, each fitting is WRAS Approved and compatible with standard copper tube. Perfect for topping up your MacPress Water Starter Pack or expanding your on-the-go fitting kit. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacValve Pushfit Stem Elbow 15mm x 15mm Chrome Plated

The MacValve Pushfit Stem Elbow 15mm x 15mm Chrome Plated is a premium push-fit plumbing fitting designed to provide a secure 90° connection with a professional chrome finish. Manufactured from high-quality brass with a durable chrome plated coating, it offers quick, tool-free installation without the need for soldering or adhesives. Suitable for hot and cold water systems, it is ideal for both domestic and commercial plumbing applications where appearance and performance are equally important.

MacDonald Plumbing Supplies MacPack Press Starter Kit For Water

The MacPack Press Starter Pack For Water is a comprehensive solution for plumbing professionals working on water system installations. This starter pack includes an essential selection of WRAS Approved MacPress fittings designed for domestic and commercial water applications, including potable water, heating, and hot water systems. All fittings feature a high-performance M-Profile design that ensures fast, secure, and flame-free connections. With no need for hot works, this kit saves time on-site while ensuring full compliance with BS EN standards. Supplied in a durable FatMac case, the pack is ideal for installers looking for reliable, professional-grade fittings. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

Todays Tools Ratcheting Adjustable Wrench WRA

The Todays Tools Ratcheting Adjustable Wrench WRA is a cleverly engineered tool designed to combine the flexibility of an adjustable spanner with the speed of a ratchet. Its unique patented mechanism enables a ratchet type action, allowing you to tighten or loosen fixings without repositioning the wrench on every turn. At 250mm long, it offers excellent leverage while remaining comfortable to handle, making it ideal for plumbing, mechanical, engineering and general maintenance tasks.

FRANKISCHE MLCP Alpex-Duo XS PE-Xb/Al/PE-RT 16 x 2mm x 200m

The FRANKISCHE MLCP Alpex-Duo XS PE-Xb/Al/PE-RT 16 x 2mm x 200m is a premium multilayer composite pipe designed for efficient and reliable use in drinking water and heating systems. Constructed from a PE-Xb inner layer, aluminium core, and PE-RT outer layer, it delivers excellent strength, flexibility, and thermal resistance. Supplied in a 200m coil, it is ideal for larger installations where fewer joints and faster installation are essential.

Todays Tools Square Drive Ratchet 5/16"- 3/8" SDR

The Todays Tools Square Drive Ratchet 5/16"–3/8" SDR is a versatile ratcheting hand tool designed to support four common square drive sizes: 3/16", 1/4", 5/16" and 3/8". This multi-drive ratchet makes fast work of tightening and loosening nuts and bolts without the need for frequent socket changes. Its reliable ratcheting mechanism allows continuous rotation in one direction while locking in the other, improving efficiency and reducing hand movement. Ideal for automotive, plumbing, mechanical and general maintenance tasks, this ratchet is a dependable addition to any professional or DIY toolkit.

Todays Tools Spear Head Tile & Glass Drill Bit 5.5mm DG5.5

The Todays Tools Spear Head Tile & Glass Drill Bit 5.5mm DG5.5 is designed for precise and accurate drilling through ceramic tiles, glass and mirrors. It features a Spear Head carbide tip that helps provide controlled drilling performance, together with a fluteless straight shank designed for use with suitable drills. For effective operation, the drill bit should always be used at low speed with coolant, such as water. This makes it a practical choice for plumbers, bathroom installers, tilers and other tradespeople working with ceramic tiles, glass and mirrors.

Todays Tools Spear Head Tile & Glass Drill Bit 7mm DG7

The Todays Tools Spear Head Tile & Glass Drill Bit 7mm DG7 is designed for precise and accurate drilling through ceramic tiles, glass and mirrors. It features a Spear Head carbide tip that helps provide controlled drilling performance, together with a fluteless straight shank designed for use with suitable drills. For effective operation, the drill bit should always be used at low speed with coolant, such as water. This makes it a practical choice for plumbers, bathroom installers, tilers and other tradespeople working with ceramic tiles, glass and mirrors.

MacDonald Plumbing Supplies MacPress Reducing Tee 28mm x 28mm x 22mm - GAS

The MacPress 28mm x 28mm x 22mm Reducing Tee – GAS allows for a reliable reduction from 28mm pipe to a 22mm branch in gas installations. A flame-free, press-fit solution engineered for safety and efficiency.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Coupling 28mm x 1" - WATER

The MacPress Male Coupling 28mm x 1" is a WRAS approved press fitting designed for connecting 28mm copper pipe to 1" BSP threaded systems. Ideal for potable water, heating, and hot water installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Coupling 42mm x 1½ - WATER

The MacPress Female Coupling 42mm x 1½" is a high-performance press-fit connector with WRAS approval, perfect for use in heating, hot water, and potable water systems, offering a reliable copper-to-threaded transition. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Coupling 54mm x 2 - WATER

The MacPress Female Coupling 54mm x 2" is a robust WRAS approved press-fit connector designed for high-capacity water systems, suitable for potable, hot water, and heating installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Coupling 15mm x ¾ - WATER

The MacPress Male Coupling 15mm x ¾ is a high-quality WRAS approved fitting designed to connect 15mm copper pipe to a ¾" BSP male thread. Ideal for potable water, heating, and hot water systems with a secure M-profile press connection.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Coupling 22mm x ½ - WATER

The MacPress Male Coupling 22mm x ½ is a WRAS approved press fitting for connecting 22mm copper pipe to a ½" BSP male thread. Suitable for potable water, hot water, and heating systems, it provides a secure and leak-free connection using M-profile press technology. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Obtuse Elbow 54mm - GAS

The MacPress 54mm Obtuse Gas Elbow is BS EN 1254-7 approved, featuring a yellow O-ring and gas marking for clear gas system identification. Ideal for gentle directional changes in gas pipework, it delivers a secure, flame-free press connection.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Obtuse Elbow 42mm - GAS

The MacPress 42mm Obtuse Gas Elbow is BS EN 1254-7 approved, featuring a yellow O-ring and gas marking for clear gas system identification. Ideal for gentle directional changes in gas pipework, it delivers a secure, flame-free press connection.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Obtuse Elbow 35mm - GAS

The MacPress 35mm Obtuse Gas Elbow is BS EN 1254-7 approved, featuring a yellow O-ring and gas marking for clear gas system identification. Ideal for gentle directional changes in gas pipework, it delivers a secure, flame-free press connection.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Elbow 54mm - WATER

The MacPress 54mm Elbow is a high-quality press fitting designed for heating, hot water, and potable water systems. WRAS approved and M-profile – trusted by professionals for secure, leak-free joints. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Elbow 42mm - WATER

The MacPress 42mm Elbow is a high-quality press fitting designed for heating, hot water, and potable water systems. WRAS approved and M-profile – trusted by professionals for secure, leak-free joints. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Obtuse Elbow 28mm - GAS

The MacPress 28mm Obtuse Gas Elbow is BS EN 1254-7 approved, featuring a yellow O-ring and gas marking for clear gas system identification. Ideal for gentle directional changes in gas pipework, it delivers a secure, flame-free press connection.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Elbow 35mm - WATER

The MacPress 35mm Elbow is a high-quality press fitting designed for heating, hot water, and potable water systems. WRAS approved and M-profile – trusted by professionals for secure, leak-free joints. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Elbow 28mm - WATER

The MacPress 28mm Elbow is a high-quality press fitting designed for heating, hot water, and potable water systems. WRAS approved and M-profile – trusted by professionals for secure, leak-free joints. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Obtuse Elbow 22mm - GAS

The MacPress 22mm Obtuse Gas Elbow is BS EN 1254-7 approved, featuring a yellow O-ring and gas marking for clear gas system identification. Ideal for gentle directional changes in gas pipework, it delivers a secure, flame-free press connection.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Elbow 22mm - WATER

The MacPress 22mm Elbow is a high-quality press fitting designed for heating, hot water, and potable water systems. WRAS approved and M-profile – trusted by professionals for secure, leak-free joints. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Obtuse Elbow 15mm - GAS

The MacPress 15mm Obtuse Gas Elbow is BS EN 1254-7 approved, featuring a yellow O-ring and gas marking for clear gas system identification. Ideal for gentle directional changes in gas pipework, it delivers a secure, flame-free press connection.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Elbow 15mm - WATER

The MacPress 15mm Elbow is a high-quality press fitting designed for heating, hot water, and potable water systems. WRAS approved and M-profile – trusted by professionals for secure, leak-free joints. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

Speedfit 22mm x 15mm x 22mm Reducing Tee PEM3022DW (Pack of 5)

The Speedfit 22mm x 15mm x 22mm Reducing Tee PEM3022DW provides a secure and efficient way to branch a 22mm pipe off a 15mm x 22mm main line. This reducing tee is ideal for systems requiring a smaller diameter spur from a larger flow. Installation is quick and flame-free, thanks to JG Speedfit’s push-fit and Twist & Lock® design. Suitable for both copper and plastic pipework, it offers WRAS approval, excellent reliability, and a 50-year guarantee.  

Speedfit 22mm x 22mm x 10mm Reducing Tee PEM302210AW (Pack of 5)

The Speedfit 22mm x 22mm x 10mm Reducing Tee PEM302210AW is a versatile push-fit solution for connecting three pipes of unequal size in a T-junction. It allows easy branch-offs from larger diameter pipework to microbore systems. Thanks to the Twist & Lock® mechanism and Grip & Seal™ technology, it offers a secure, leak-free connection with fast installation and no need for hot works or tools. Designed for both plastic and copper pipes, this UK-made fitting is WRAS approved and backed by a 50-year guarantee.  

Speedfit 22mm x 22mm x 15mm Reducing Tee PEM3022AW (Pack of 5)

The Speedfit 22mm x 22mm x 15mm Reducing Tee PEM3022AW is designed for efficient pipe branching in plumbing systems. It connects two 22mm pipes with a 15mm centre outlet, making it ideal for reducing flow to smaller pipework. With its push-fit installation and Twist & Lock® mechanism, the fitting saves time on site and eliminates the need for tools or heat. WRAS approved and backed by a 50-year guarantee, this tee is compatible with copper and plastic pipes for hot and cold water systems.

Speedfit 28mm x 28mm x 15mm Reducing Tee PEM302815AW (Pack of 2)

The Speedfit 28mm x 28mm x 15mm Reducing Tee PEM302815AW is a reliable push-fit fitting designed to join three pipes of unequal size in a convenient T-configuration. With 28mm left and right ports and a 15mm centre outlet, it is ideal for creating reduced branches in hot and cold water or central heating systems. Thanks to JG Speedfit’s Twist & Lock® technology, it delivers a quick, flame-free installation with no need for tools or messy adhesives. Though not WRAS approved for copper applications, it’s fully approved for use with PEX and polybutylene pipework, making it a great option for modern plastic plumbing systems.  

Speedfit 28mm x 28mm x 22mm Reducing Tee PEM3028AW (Pack of 2)

The Speedfit 28mm x 28mm x 22mm Reducing Tee PEM3028AW enables a fast, clean and secure connection between two 28mm pipes and a reduced 22mm centre branch. Designed for both plastic and copper pipe systems, this push-fit tee makes installation straightforward with no tools or heat required. Its Twist & Lock® mechanism ensures a reliable seal for hot and cold water systems or sealed central heating installations. This fitting is an ideal choice for modern domestic plumbing projects that require durability and efficiency.  

Speedfit 15mm x 10mm Reducer PEM061510W (Pack of 10)

The Speedfit 15mm x 10mm Reducer PEM061510W is a push-fit fitting designed to connect two Speedfit fittings of unequal sizes, reducing the line size effectively and securely. The reducer features a reduced spigot end, making it ideal for joining 15mm and 10mm pipes. It is quick and easy to install and demount without tools, offering a simple solution for reducing pipe sizes without the need for hot works or additional tools. WRAS approved, this fitting is perfect for both hot and cold water systems. Designed and manufactured in the UK with a 50-year guarantee.  

Speedfit 22mm x 15mm Reducer PEM062215W (Pack of 10)

The Speedfit 22mm x 15mm Reducer PEM062215W is designed to quickly and securely reduce pipe sizes from 22mm to 15mm. This push-fit fitting offers an easy installation process, with no tools required for fitting or removal. The reduced spigot end connects unequal sized pipes, making it ideal for plumbing applications where size reduction is necessary. It is flame-free and requires no hot works, glue, or flux, offering up to 40% faster installation than traditional methods. WRAS approved and designed for both hot and cold water and central heating systems, this fitting is manufactured in the UK and comes with a 50-year guarantee.  

Speedfit 28mm x 15mm Reducer PEM062815W (Pack of 5)

The Speedfit 28mm x 15mm Reducer PEM062815W offers a quick and secure solution to reduce the pipe size from 28mm to 15mm. Designed for both plastic and copper pipes, this push-fit fitting eliminates the need for hot works, glue, or flux, providing a faster, tool-free installation. Ideal for applications where a line size reduction is needed, the fitting’s Grip & Seal™ collet ensures a tight and secure connection. It is suitable for use with hot and cold water systems and central heating. Manufactured in the UK, it comes with a 50-year guarantee.  

Speedfit 28mm x 22mm Reducer PEM062822W (Pack of 5)

The Speedfit 28mm x 22mm Reducer PEM062822W offers an efficient and reliable solution to reduce the pipe size from 28mm to 22mm. This push-fit fitting allows quick, tool-free installation of plastic or copper pipe, making it up to 40% faster to install compared to traditional methods. The Grip & Seal™ collet ensures a tight, secure connection while the Twist & Lock® cap adds compression. This fitting is ideal for use with hot and cold water systems and central heating. Designed, manufactured, and assembled in the UK, it comes with a 50-year guarantee.

Speedfit 10mm Stem Elbow PEM221010W (Pack of 10)

The Speedfit 10mm Stem Elbow PEM221010W allows quick and reliable connection between two 10mm Speedfit fittings, forming a neat 90° swivel joint. Ideal for installations like cold water storage tanks or compact pipework layouts, this push-fit elbow ensures a safe, tool-free, and flame-free connection. Featuring Twist & Lock® and Grip & Seal™ technology, it delivers a watertight and mechanically strong seal. Made in the UK and WRAS approved, this fitting is backed by a 50-year guarantee.

Speedfit 10mm x 15mm Stem Elbow PEM221015W (Pack of 10)

The Speedfit 10mm x 15mm Stem Elbow PEM221015W is a versatile push-fit fitting designed to connect 10mm and 15mm Speedfit fittings at a 90° angle. Ideal for creating a compact swivel joint between unequal pipe sizes, this fitting is perfect for installations in tight spaces such as around cold water storage tanks. With Twist & Lock® and Grip & Seal™ technology, it ensures a leak-free, secure connection without the need for tools or heat. WRAS approved and backed by a 50-year guarantee, this UK-made fitting is reliable and easy to install.  

Speedfit Unequal Straight Connector 15mm x 10mm PEM201510W (Pack Of 10)

The Speedfit 15 x 10mm Reducing Straight Coupler PEM201510W is a quick and reliable solution for connecting two unequal pipe sizes (15mm to 10mm). This push-fit fitting simplifies installation by eliminating the need for tools, hot works, or glue. Designed for both plastic and copper pipes, it ensures a secure and flame-free connection. The Grip & Seal™ collet and Twist & Lock® cap provide added security and compression. This fitting is WRAS approved, compatible with hot and cold water systems, and suitable for central heating. It is designed, manufactured, and assembled in the UK and comes with a 50-year guarantee.  

Speedfit Unequal Straight Connector 22mm x 15mm PEM202215W (Pack of 5)

The Speedfit 22 x 15mm Reducing Straight Coupler PEM202215W is designed to quickly and securely connect two unequal pipe sizes (22mm to 15mm). This push-fit fitting offers easy installation without the need for tools, hot works, or glue. It features a Grip & Seal™ collet with stainless steel teeth for a tight and secure fit. The Twist & Lock® cap ensures additional compression and stability. Suitable for both plastic and copper pipes, it is WRAS approved and ideal for hot and cold water systems, as well as central heating. This fitting is designed, manufactured, and assembled in the UK and comes with a 50-year guarantee.  

Speedfit 15mm x 10mm Reducing Elbow PEM211510W (Pack of 10)

The Speedfit 15 x 10mm Reducing Elbow PEM211510W is a quick and secure solution for forming 90° bends between 15mm and 10mm pipes. Ideal for use with plastic or copper piping, this WRAS approved fitting enables fast, flame-free installation without the need for tools or hot works. Featuring JG Speedfit’s Grip & Seal™ and Twist & Lock® technologies, it provides a reliable, leak-proof connection perfect for confined spaces and both hot and cold water systems.  

Speedfit 22mm x 15mm Reducing Elbow PEM212215W (Pack of 5)

The JG Speedfit 22mm x 15mm Reducing Elbow PEM212215W enables efficient pipework transitions where a 90° bend is required between two different pipe sizes. This push-fit elbow offers a secure and time-saving installation process—just push the fitting onto the pipe and twist the locking cap to secure. It features the trusted Grip & Seal™ system, which uses stainless steel teeth to grip the pipe, and an O-Ring seal to ensure a watertight fit. The Twist & Lock® mechanism adds compression for an even tighter connection. This reducing elbow is flame-free and tool-free, minimising installation time and maximising safety. It’s compatible with Speedfit PEX and polybutylene pipes (with inserts) as well as copper. Ideal for both domestic and commercial systems, it supports hot and cold water and central heating applications. Manufactured in the UK, it carries a WRAS approval and a 50-year guarantee for long-term peace of mind.  

Speedfit 15mm x 15mm x 10mm Reducing Tee PEM3015AW (Pack of 5)

The Speedfit 15mm x 15mm x 10mm Reducing Tee PEM3015AW is a reliable and efficient push-fit solution for joining three pipes of different diameters. Designed for both plastic and copper pipes, this high-performance fitting forms a secure T-junction and is suitable for domestic water supply and central heating applications. Installation is tool-free and flame-free, offering a quick and clean alternative to traditional plumbing. Manufactured in the UK, this WRAS approved product benefits from a 50-year guarantee and the proven performance of JG Speedfit technology.  

Speedfit 15mm x 15mm x 22mm Reducing Tee PEM3022CW (Pack of 5)

The Speedfit 15mm x 15mm x 22mm Reducing Tee PEM3022CW offers a fast, reliable way to join three pipes of different diameters in a secure T-configuration. Designed for use with copper or plastic pipes, this push-fit fitting is ideal for hot and cold water or central heating systems. Its tool-free installation makes it especially useful in tight spaces and eliminates the need for flame, glue, or flux. Manufactured and assembled in the UK, this WRAS approved product ensures long-term durability with a 50-year guarantee.  

Speedfit 22mm x 15mm x 15mm Reducing Tee PEM3022BW (Pack of 5)

The Speedfit 22mm x 15mm x 15mm Reducing Tee PEM3022BW allows you to join three pipes of different sizes quickly and securely, forming a neat T-junction without the need for tools, soldering or glue. Ideal for both plastic and copper pipes in hot and cold water or central heating systems, this high-quality push-fit fitting is engineered for convenience and durability. With WRAS approval and a 50-year guarantee, it offers a safe, flame-free solution for professional plumbing installations.  

Speedfit 22mm Collet Locking Clip Red CM1822R (Pack of 100)

The Speedfit 22mm Collet Locking Clip in red (CM1822R) is a vital component for secure push-fit plumbing installations. Designed to lock under the Speedfit collet, this clip prevents accidental disconnection of pipes from fittings. The red colour coding clearly indicates its use for cold water systems, ensuring easy identification. Supplied in a bag of 100, it is an ideal solution for professional plumbers working on large-scale projects or maintenance work.  

Speedfit 15mm Collet Locking Clip Blue CM1815B (Pack of 100)

The Speedfit 15mm Collet Locking Clip in blue (CM1815B) is a simple but essential component for any push-fit plumbing installation. Designed to lock securely beneath the Speedfit fitting's collet, it helps prevent accidental pipe disconnection. The blue colour coding allows for quick and easy identification of cold water pipework, helping to streamline installation and servicing. Supplied in a bag of 100, this bulk pack is ideal for professional plumbers or maintenance teams working across multiple projects.

Speedfit 22mm Collet Locking Clip Blue CM1822B (Pack of 100)

The Speedfit 22mm Collet Locking Clip in blue (CM1822B) ensures secure push-fit plumbing installations by preventing the accidental disconnection of pipes from fittings. The blue colour coding clearly identifies its use for hot water systems, making it easy to differentiate from cold water pipes. Supplied in a bag of 100, it is the perfect solution for professional plumbers working on large projects or maintenance work.  

Speedfit 15mm x ½ Hose Connector NC448

The Speedfit 15mm x 1/2" Hose Connector NC448 provides a fast and secure push-fit connection between 15mm pipe and 1/2" hose threads. Ideal for plastic or copper pipework, this connector simplifies plumbing installations, especially in tight or awkward spaces, by removing the need for tools or hot works. Featuring a secure Grip & Seal™ collet and corrosion-resistant materials, it ensures a reliable connection every time.  

Speedfit 10mm Pipe Insert TSM10N (Pack of 50)

The Speedfit 10mm Pipe Insert TSM10N is a crucial component when installing JG Speedfit pipework. Designed to maintain the round shape of 10mm pipe ends and enhance the overall seal, this insert ensures reliable and rigid connections whether you're using Speedfit push-fit or compression fittings. By reinforcing the pipe internally, it helps prevent deformation during cutting or under stress, contributing to a more durable and leak-free system. Suitable for use in both hot and cold water applications and central heating systems, it’s also backed by a 50-year guarantee for long-term peace of mind.

Speedfit 15mm Pipe Insert TSM15N (Pack of 50)

The Speedfit 15mm Pipe Insert TSM15N is a crucial component when installing JG Speedfit pipework. Designed to maintain the round shape of 15mm pipe ends and enhance the overall seal, this insert ensures reliable and rigid connections whether you're using Speedfit push-fit or compression fittings. By reinforcing the pipe internally, it helps prevent deformation during cutting or under stress, contributing to a more durable and leak-free system. Suitable for use in both hot and cold water applications and central heating systems, it’s also backed by a 50-year guarantee for long-term peace of mind.

Speedfit 22mm Pipe Insert TSM22N (Pack of 25)

The Speedfit 22mm Pipe Insert TSM22N is a crucial component when installing JG Speedfit pipework. Designed to maintain the round shape of 22mm pipe ends and enhance the overall seal, this insert ensures reliable and rigid connections whether you're using Speedfit push-fit or compression fittings. By reinforcing the pipe internally, it helps prevent deformation during cutting or under stress, contributing to a more durable and leak-free system. Suitable for use in hot and cold water applications and central heating systems, it’s also backed by a 50-year guarantee for long-term peace of mind.

Speedfit 28mm Pipe Insert TSM28N (Pack of 10)

The Speedfit 28mm Pipe Insert TSM28N is a crucial component when installing JG Speedfit pipework. Designed to maintain the round shape of 28mm pipe ends and enhance the overall seal, this insert ensures reliable and rigid connections whether you're using Speedfit push-fit or compression fittings. By reinforcing the pipe internally, it helps prevent deformation during cutting or under stress, contributing to a more durable and leak-free system. Suitable for use in hot and cold water applications and central heating systems, it’s also backed by a 50-year guarantee for long-term peace of mind.

Speedfit 10mm Superseal Pipe Insert STS10 (Pack of 50)

The Speedfit 10mm Superseal Pipe Insert STS10 is designed to provide a secure, rigid connection between Speedfit pipe and fittings. The insert contains dual O-Rings for superior sealing performance, ensuring water-tight connections. It prevents deformation of the pipe and maintains structural integrity. Ideal for hot and cold water systems and central heating, this insert helps secure the connection even when side loads are applied. It is suitable for Speedfit pipes and fittings only and is WRAS approved, ensuring high-quality, reliable performance.  

Speedfit 15mm Superseal Pipe Insert STS15 (Pack of 50)

The Speedfit 15mm Superseal Pipe Insert STS15 is designed to provide a secure, rigid connection between Speedfit pipe and fittings. Featuring dual O-Rings for superior sealing, it ensures water-tight connections and helps maintain the pipe's structural integrity. This insert is ideal for both hot and cold water systems, as well as central heating, offering reliable performance even under side load conditions. WRAS approved for guaranteed quality, it is compatible with Speedfit pipes and fittings only.  

Speedfit 22mm Superseal Pipe Insert STS22 (Pack of 25)

The Speedfit 22mm Superseal Pipe Insert STS22 ensures a rigid, secure connection between Speedfit pipe and fittings. Featuring dual O-Rings, it delivers enhanced sealing for water-tight connections, preventing leaks and maintaining pipe integrity. Ideal for hot and cold water systems and central heating, the insert is WRAS approved for guaranteed quality and performance. It is compatible with Speedfit pipes and fittings only.  

Speedfit 28mm Superseal Pipe Insert STS28 (Pack of 10)

The Speedfit 28mm Superseal Pipe Insert STS28 strengthens and seals Speedfit pipe connections with advanced dual O-Ring technology. Designed to maintain pipe shape and ensure structural integrity, this insert prevents leaks and supports secure installations in hot and cold water systems, as well as central heating. Exclusively for Speedfit pipes and fittings, the WRAS approved STS28 provides superior performance and peace of mind.  

Speedfit 15mm Collet Locking Clip White CM1815W (Pack of 100)

The Speedfit 15mm Collet Locking Clip (CM1815W) in white is designed to enhance the security of Speedfit push-fit fittings by preventing accidental disconnection. This clip fits snugly under the fitting collet, locking the pipe in place. Supplied in a cost-effective bag of 100, it is ideal for trade use on large-scale installations. Colour-coded for easy identification, these clips are compatible with both hot and cold water and central heating systems. Made in the UK, they deliver reliability and peace of mind.  

Speedfit 22mm Collet Locking Clip White CM1822W (Pack of 100)

The Speedfit 22mm Collet Locking Clip in white (CM1822W) is an essential part of any push-fit plumbing installation. This clip locks securely under the Speedfit collet, preventing accidental disconnection of pipes from fittings. Colour-coded white for easy identification of hot water systems, it’s a practical addition to any plumbing toolkit. Supplied in a bag of 100, this bulk pack is ideal for professional plumbers and maintenance teams working on multiple projects.  

Speedfit 15mm Collet Locking Clip Red CM1815R (Pack of 100)

The Speedfit 15mm Collet Locking Clip in red (CM1815R) provides a secure and reliable method to prevent accidental disconnection of pipes from standard Speedfit push-fit fittings. This clip is designed to snap beneath the collet, locking the pipe in place. The red colour makes it easy to identify hot water lines during installation or maintenance. Supplied in a convenient trade pack of 100, it’s ideal for professional plumbers working on larger projects where efficiency and pipe safety are essential.  

Speedfit 15mm Stop End PSE4615W (Pack of 10)

The Speedfit 15mm Stop End PSE4615W offers a simple and secure solution for capping off 15mm pipework in both temporary and permanent installations. This push-fit fitting can be easily installed and demounted without tools, making it perfect for situations where you need to pause work or perform pressure testing. It is WRAS approved for use with hot and cold water and central heating systems. Manufactured in the UK and backed by a 50-year guarantee.  

Speedfit 22mm Stop End PSE4622W (Pack of 5)

The Speedfit 22mm Stop End PSE4622W offers a reliable solution for capping off 22mm pipework at termination points, ideal for both temporary and permanent installations. This push-fit fitting ensures a quick, tool-free installation and removal, perfect for situations where work needs to pause or pressure testing is required. It is WRAS approved for use with hot and cold water systems, offering a secure and corrosion-resistant seal. Designed, manufactured, and assembled in the UK, and supported by a 50-year guarantee.  

Speedfit 28mm Stop End PSE4628W (Pack of 5)

The Speedfit 28mm Stop End PSE4628W offers an efficient solution for capping off 28mm pipework at termination points, whether temporarily or permanently. This tool-free push-fit fitting allows for fast installation and removal, making it ideal for situations requiring water to be turned off temporarily or for pressure testing systems before appliances are connected. WRAS approved, it is compatible with hot and cold water systems and comes with a 50-year guarantee. Designed and manufactured in the UK.  

Speedfit 15mm Emergency Shut Off Tap 15ESOT (Pack of 5)

The Speedfit 15mm Emergency Shut Off Tap offers instant water isolation with a simple quarter-turn knob, making it ideal for emergency or maintenance situations. Quick to install and remove without tools or hot works, this compact valve is suitable for hot and cold water systems and is WRAS approved for reliability. Compatible with both copper and plastic pipework, it's perfect for tight or inaccessible spaces.  

Speedfit 15mm Double Check Service Valve 15DCSV

The Speedfit 15mm Double Check Service Valve offers reliable fluid category 3 backflow protection with integrated isolation, ideal for preventing contamination in domestic and commercial plumbing systems. With a tool-free push-fit design, it allows for quick installation and demounting, saving time and labour. Compatible with copper and plastic pipe systems, this NON WRAS-compliant valve features a flame-free, secure Grip & Seal™ connection and is perfect for hot and cold water systems (excluding central heating).  

Speedfit 15mm Plastic Service Valve 15SV (Pack of 5)

The Speedfit 15mm Plastic Service Valve (15SV) provides a quick and dependable way to isolate water flow to a fixture or appliance during maintenance or in an emergency. Featuring a tamper-resistant 1/4 turn screwdriver slot, this compact valve is suitable for use with both copper and plastic pipe (with inserts). It can be rotated in-situ to further discourage unauthorised adjustment. Easy to install without the need for tools, hot works or sealants, the valve ensures fast, clean and secure connections in tight or hard-to-reach spaces. It’s WRAS approved and made in the UK for quality assurance.  

Speedfit 15mm x ½ Straight Service Valve with Tap Connector 15SVSTC-W (Pack of 5)

The Speedfit 15mm x 1/2 Straight Service Valve with Tap Connector (15SVSTC-W) offers an efficient solution for connecting fixtures like taps, bath taps, WCs, and appliances such as washing machines and dishwashers. Featuring a ¼ turn handle, it allows for quick isolation of water flow during maintenance or installation. The valve is designed for easy push-fit connections to both plastic and copper pipes, eliminating the need for hot works or tools. With its Grip & Seal™ technology, the valve ensures a leak-free connection and fast installation, making it an ideal choice for both residential and commercial applications. WRAS approved for safe and reliable operation, it is suitable for both hot and cold water systems but not for central heating.  

Speedfit 15mm x ½ Angled Service Valve c/w Tap Connector 15SVBTC-W (Pack of 5)

The Speedfit 15mm x 1/2 Angled Service Valve with Tap Connector (15SVBTC-W) is a convenient and reliable solution for isolating water flow to fixtures or appliances in both emergency and maintenance situations. Featuring a 90° bent nut and a tamperproof ¼ turn screwdriver slot, it allows for quick and secure connections to side-entry taps, toilets, or male threads. This easy-to-use valve eliminates the need for hot works and tools, ensuring a safe and efficient installation in confined spaces. Ideal for both copper and plastic pipe systems (inserts required), the valve is WRAS approved, ensuring reliable performance in both hot and cold water systems.  

Speedfit 15mm Brass Chrome Plated Ball Valve 15BV

The Speedfit 15mm Brass Chrome Plated Ball Valve is a premium push-fit isolation valve, designed to quickly stop water flow for maintenance or emergencies. With a robust brass body and a stylish chrome finish, it connects seamlessly to copper or plastic pipe without tools or hot works. The integrated handle offers instant control, and the valve is fully demountable, making it ideal for both new installs and retrofits. WRAS approved and manufactured in the UK for lasting performance.  

Speedfit 15mm Brass Drain Cock 15BDC (Pack of 5)

The Speedfit 15mm Brass Drain Cock (15BDC) is a reliable and robust drain-off point for central heating systems. Designed for easy installation and long-term performance, it is manufactured using durable DZR brass for maximum resistance to corrosion. Compatible with both copper and plastic pipe systems, this drain cock is ideal for safely emptying heating circuits during maintenance or upgrades. Manufactured in the UK and trusted by professional installers.

Speedfit 10mm Equal Elbow PEM0310W (Pack of 10)

The Speedfit 10mm Equal Elbow PEM0310W enables quick, tool-free connection of two equal-sized 10mm plastic or copper pipes at a 90° angle. Featuring Twist & Lock® and Grip & Seal™ technologies, it delivers a secure, leak-resistant connection ideal for confined spaces. Its flame-free installation makes it safer and up to 40% quicker than traditional methods. Compatible with hot and cold water or central heating systems and WRAS approved.  

Speedfit 15mm Equal Elbow PEM0315W (Pack of 10)

The Speedfit 15mm Equal Elbow PEM0315W enables secure, flame-free 90° connections between two equal-sized 15mm plastic or copper pipes. This Twist & Lock® push-fit fitting installs up to 40% faster than traditional plumbing methods and requires no tools or hot works, making it perfect for tight spaces. Ideal for hot and cold water and central heating systems, it’s WRAS approved and includes a 50-year guarantee.  

Speedfit 22mm Equal Elbow PEM0322W (Pack of 5)

The Speedfit 22mm Equal Elbow PEM0322W offers a quick and secure method to connect two equal-sized pipes at a 90° angle. This Twist & Lock® push-fit fitting eliminates the need for tools or hot works, making it ideal for confined or sensitive environments. It’s WRAS approved and suitable for hot and cold water as well as central heating systems. Made in the UK, it provides up to 40% faster installation than traditional fittings and includes a 50-year guarantee for peace of mind.  

Speedfit 28mm Equal Elbow PEM0328W (Pack of 2)

The Speedfit 28mm Equal Elbow PEM0328W provides a secure and efficient way to connect two 28mm pipes at a 90° angle without tools or heat. Its Twist & Lock® technology ensures a strong, leak-resistant seal, and it’s up to 40% quicker to fit than traditional options. Designed for use with polybutylene and PEX pipe, this push-fit fitting is perfect for hot and cold water systems and central heating installations. Made in the UK with a 50-year guarantee for long-term reliability.  

Speedfit 10mm Equal Tee PEM0210W (Pack of 10)

The Speedfit 10mm Equal Tee PEM0210W allows for the seamless connection of three equal-sized pipes, providing a quick and secure solution for plumbing systems. Ideal for both plastic and copper pipework, the push-fit design simplifies installation, requiring no tools, hot works, or flux. With its Twist & Lock® cap, this fitting ensures a strong compression connection. WRAS approved, it is suitable for hot, cold, and central heating systems.  

Speedfit 15mm Equal Tee PEM0215W (Pack of 5)

The Speedfit 15mm Equal Tee PEM0215W provides a fast and reliable way to connect three 15mm pipes. This push-fit fitting is ideal for plastic and copper pipe systems, ensuring easy installation with no tools or hot works required. The Twist & Lock® cap adds extra security and compression, making it perfect for use in confined spaces. WRAS approved, it is suitable for hot, cold, and central heating systems.  

Speedfit 22mm Equal Tee PEM0222W (Pack of 5)

The Speedfit 22mm Equal Tee PEM0222W is a push-fit fitting designed to quickly and securely connect three 22mm pipes. Ideal for use with both plastic and copper pipes, it features a Twist & Lock® cap that adds compression and ensures a secure connection. This fitting eliminates the need for hot works or tools, making it perfect for confined spaces. WRAS approved and suitable for hot, cold, and central heating systems, it offers a 50-year guarantee for reliability.  

Speedfit 28mm Equal Tee PEM0228W (Pack of 2)

The Speedfit 28mm Equal Tee PEM0228W offers a fast, secure way to connect three pipes of equal size using push-fit technology. With its Twist & Lock® cap for added compression and the Grip & Seal™ collet for a watertight connection, this fitting simplifies plumbing work—especially in tight spaces—without the need for tools or heat. Suitable for hot and cold water or central heating systems, it's WRAS approved for use with PEX and polybutylene pipes.  

Speedfit 10mm Stop End PSE4610W (Pack of 10)

The Speedfit 10mm Stop End PSE4610W provides a fast, secure solution for capping off 10mm pipework in both temporary and permanent installations. Its push-fit design allows for easy installation and removal without tools, making it ideal for situations where work needs to be paused or when pressure testing a system. The fitting is made to the highest standards in the UK and is WRAS approved for both hot and cold water and central heating systems. Backed by a 50-year guarantee.  

Speedfit 12mm x M10 x 300mm Braided Flexi Hose - Monobloc Mixers FLX48

The Speedfit 12mm x M10 x 300mm Braided Flexi Hose (FLX48) offers a compact and reliable solution for connecting 12mm pipe to M10 monobloc mixer taps. Featuring a push-fit connection and threaded M10 end with offset spanner flats, it enables fast, secure installation even in confined areas. The stainless steel braid adds durability, while WRAS approval ensures compliance with UK plumbing standards.  

Speedfit 15mm x M10 x 300mm Braided Flexi Hose - Monobloc Mixers FLX28

The Speedfit 15mm x M10 x 300mm Braided Flexi Hose (FLX28) provides a quick, safe and convenient method to connect 15mm plastic or copper pipe to monobloc mixer taps with an M10 female thread. Designed for hassle-free installation in tight spaces, this WRAS approved hose features a stainless steel braid, Grip & Seal™ push-fit connection, and offset spanner flats for easy tightening.  

Speedfit 15mm x M12 x 300mm Braided Flexi Hose - Monobloc Mixers FLX29

The Speedfit 15mm x M12 x 300mm Braided Flexi Hose (FLX29) offers a simple and effective way to connect 15mm pipework to M12 female-threaded monobloc mixer taps. With a push-fit connection and offset spanner flats, it is ideal for tight or awkward installations. The stainless steel braid adds strength, while the WRAS approval ensures reliability and safety for use with hot or cold water.  

FM Products Clip Link Pipe Clip Spacer Block (Qty Of 100)

The Clip Link Pipe Clip Spacer Block (Qty Of 100) provides a practical solution for maintaining consistent spacing when installing pipework with clip-link clips. Compatible with all clip-link clips and suitable for use with lagging up to 30mm, these spacer blocks help ensure professional, tidy, and efficient pipe installations. Ideal for plumbers and heating engineers, they offer a simple way to maintain alignment, improve insulation performance and reduce stress on pipes, helping to achieve reliable and compliant installations on every job.

Speedfit Push-Fit Radiator Outlet Plate JG-ROP

The Speedfit Push-Fit Radiator Outlet Plate JG-ROP offers a professional finish for 10mm pipe drops to radiators, allowing pipework to remain concealed within walls. Designed for use with standard 25mm deep single gang KO boxes, this outlet plate supports quick push-fit connection and is suitable for use with plastic or copper pipe in central heating systems. Rubber grommet included for secure sealing and protection.