Regin Leak Detection Fluid Large 1 Litre Refill REGL12

The Regin Leak Detection Fluid Large 1 Litre Refill REGL12 is a convenient 1000ml refill bottle of leak detection fluid for plumbing, heating and gas installation work. It is ideal for topping up the Regin Leak Shot bottle, helping tradespeople keep their leak detection equipment ready for use without needing to replace the complete bottle. The same quality leak detection fluid is used throughout Regin's leak detection formula range, making this a practical choice for professional engineers carrying out routine leak checks and maintenance.

Regin Jumbo Blue Rolls 2 Ply x 2 (400Mtrs X 275mm) REGW82

he Regin Jumbo Blue Rolls 2 Ply x 2 (400M x 275mm) REGW82 offer a reliable and highly absorbent solution for cleaning and maintenance tasks across a wide range of environments. Each roll provides 400 metres of material and approximately 1000 sheets, ensuring long-lasting use in busy workplaces. With a strong 2 ply construction and 275mm width, these rolls are ideal for workshops, plumbing jobs, kitchens and commercial settings where efficiency and durability are essential.

Regin Green Arrow On White Direction Tape 33M REGA49

The Regin Green Arrow On White Direction Tape 33M REGA49 is designed to clearly indicate flow direction on pipework and systems. Featuring a bold green arrow on a white background, it provides high visibility and easy identification in both domestic and commercial installations. Supplied on a 33 metre roll, this tape is ideal for marking heating, water and other pipe systems to improve safety, organisation and compliance on site.

Regin Decommissioned Appliance Report Pad REGP59

The Regin Decommissioned Appliance Report Pad REGP59 is a professional reporting pad designed to document the safe decommissioning of boilers and other appliances that must not be used again. It provides clear written evidence that an appliance has been taken out of service, helping engineers meet compliance requirements and protect both customers and contractors. Supplied with 25 reports in triplicate, this pad allows copies to be retained by the engineer, the customer and for official records. It is ideal for use alongside Regin REGP36 and REGP26 warning stickers to clearly mark appliances as decommissioned.

Regin Pillar Tap Washers ½ Poly (Pack Of 10) REGQ196

The Regin Pillar Tap Washers 1/2" Poly (Pack of 10) REGQ196 are reliable replacement washers designed for maintaining and repairing pillar taps. Manufactured from durable polythene material, these washers provide an effective seal to help prevent drips and leaks in tap assemblies. Supplied in a convenient pack of 10, they are ideal for plumbers, maintenance engineers and DIY users who want dependable spares readily available. Suitable for routine servicing and tap refurbishment, these washers help restore smooth operation and extend the lifespan of pillar taps in domestic and commercial installations.

Regin Pillar Tap Washers ¾ Poly (Pack Of 10) REGQ197

The Regin Pillar Tap Washers ¾ Poly (Pack of 10) REGQ197 are dependable replacement washers designed for servicing and maintaining pillar taps. Manufactured from durable polythene material, these washers provide an effective seal to help eliminate drips and restore proper shut off performance. Supplied in a convenient pack of 10, they are ideal for plumbers, maintenance engineers and DIY users who want reliable spares readily available. Suitable for use in both domestic and commercial environments, these washers offer a simple and cost effective solution for routine tap repairs.

Regin Pipe Label HEATING (Pack of 8) REGQ636

The Regin Pipe Label HEATING (Pack of 8) REGQ636 is designed to provide clear and professional identification of heating pipework within domestic and commercial systems. These labels help ensure instant recognition of pipe contents, improving safety, compliance and ease of maintenance. Supplied in a convenient pack of eight, they are ideal for installers, maintenance engineers and facilities managers who need consistent and accurate pipe marking. Suitable for new installations or retrofitting to existing systems, these labels support good practice in heating system identification.

Regin Braided Glass Yarn 10mm x 5mtr Black REGY22

The Regin Braided Glass Yarn 10mm x 5mtr Black REGY22 is a robust and flexible stove rope, designed for sealing and insulating stoves, fireplaces, and other high-temperature applications. Made from premium braided glass yarn, it provides excellent heat resistance and maintains a secure seal, preventing air leaks and improving stove efficiency. Supplied in a 5-metre roll, this black stove rope is ideal for maintenance, repairs, or new installations, ensuring long-lasting performance and a professional finish.

Regin Braided Glass Yarn 12mm x 5mtr Black REGY24

The Regin Braided Glass Yarn 12mm x 5mtr Black REGY24 is a durable and flexible stove rope, designed for sealing and insulating stoves, fireplaces, and other high-temperature applications. Made from premium braided glass yarn, it offers excellent heat resistance and creates a reliable seal that prevents air leaks and improves efficiency. Supplied in a 5-metre roll, this black stove rope is ideal for maintenance, repairs, or new installations, providing long-lasting performance and a professional finish.

Regin Air Source Heat Pump Service & Maintenance Pad REGP48

The Regin Air Source Heat Pump Service & Maintenance Pad REGP48 is a purpose-designed documentation pad for engineers involved in the servicing and installation of air source heat pump systems. It provides clear, professional certification of both installation and ongoing maintenance work, helping ensure compliance and accurate record keeping. Supplied in a convenient triplicate format, this pad allows engineers to retain copies for themselves, the customer and official records. Ideal for use in domestic and commercial settings, it supports best practice by making service history easy to record, track and reference.

Regin 300mm Extension Drill Bar (For T78 Hex Brush) REGT68

The Regin 300mm Extension Drill Bar For T78 Hex Brush is designed to extend the reach of the Regin REGT78 filament hex brush, making it easier to access deep or hard to reach areas during cleaning and preparation tasks. With a robust 300mm length, this extension bar allows for improved efficiency when working inside pipes, ducts or confined spaces. It is engineered for secure and stable operation, ensuring consistent performance when used with compatible drill driven brush systems. Supplied complete with fixing components, it offers a simple and reliable solution for extending cleaning capability on site.

Regin Fin Straightening Comb REGT74

The Regin Fin Straightening Comb REGT74 is a compact and practical maintenance tool designed to restore bent or damaged fins on heat pumps, radiators, and other appliances that rely on heat dissipation. By realigning the fins, it helps maintain optimal airflow and thermal efficiency, improving system performance and extending component life. The comb features multiple fin spacing options, making it suitable for a variety of heat exchangers and cooling systems. A must-have tool for HVAC engineers, plumbers, and maintenance professionals.

Regin Discreet White Warning - Compartment Sticker (Pack of 8) REGP14

Regin Discreet White Compartment Stickers (Pack of 8) are designed to provide essential safety warnings while maintaining a clean and unobtrusive appearance. Created as an alternative to the REGP15 sticker, these stickers minimise visual impact, blending seamlessly with boiler surfaces. They warn users about the dangers of blocking ventilation and storing items in compartments or airing cupboards, ensuring compliance and safety without compromising aesthetics.

Regin Flexi Square Head Multi Driver ¼" REGB28

The Regin Flexi Square Head Multi Driver ¼" REGB28 is a versatile and practical tool designed for engineers and trade professionals who need flexible access in awkward or restricted spaces. Featuring a flexible shaft and a universal ¼" square head, this multi-driver allows you to use your existing ¼" sockets and bits without the need to invest in additional tooling. Ideal for maintenance, installation, and repair work, it offers convenience, adaptability, and reliability in one compact solution.

Regin 10mm Nut Driver (Flexible Shaft) REGU81

The Regin 10mm Nut Driver (Flexible Shaft) REGU81 is the perfect tool for removing gas test nipples during gas tightness tests. Its flexible shaft and built-in 10mm fixed hex end make it a versatile and essential companion for gas engineers and professionals.

Regin Tubing & Cable Storage Zip Bag REGR08

The Regin Tubing & Cable Storage Zip Bag REGR08 is a durable and practical storage solution designed to keep hoses, tubing, and cables neatly organised during transport and storage. Manufactured from high-quality Oxford cloth with a water-resistant finish, it helps protect equipment from dirt and moisture while reducing tangles. Ideal for storing drain down hose kits, plumbing tubing, or EV charging cables, this lightweight zip bag is an essential accessory for professional tradespeople.

Regin Sealing Yarn Fixative 120ml With Nozzle REGY30

The Regin Sealing Yarn Fixative 120ml With Nozzle REGY30 is a high-performance adhesive designed for securing glass yarn to metal or glass surfaces. Supplied in a 120ml container with a convenient nozzle applicator, it allows precise application and ensures a strong, durable bond. Heat resistant up to 850°C, this fixative is ideal for stoves, fireplaces, and other high-temperature installations. Its large size provides excellent value for money, making it a practical choice for both professional installers and DIY enthusiasts.

Regin Silicone Grease (WRAS Approved) - 50ml REGZ40

Regin Silicone Grease (WRAS Approved) – 50ml REGZ40 is a high-performance, water-repellent silicone grease designed for professional use in plumbing, heating, and electrical systems. Supplied in a handy 50g tube, this non-melting, odourless, and tasteless grease is ideal for use with potable water and electrical insulation applications. Approved by WRAS, it ensures safe, effective lubrication for components such as tap cartridges, O-rings, and boiler seals.

Regin Commercial Catering Appliance Gas Safety Inspection Report Pad REGP57

The Regin Commercial Catering Appliance Gas Safety Inspection Report Pad REGP57 is designed for recording gas safety inspections on commercial catering equipment. Supplied as a pad of 25 duplicate (2-part) reports, it allows engineers to provide a clear record for both themselves and their customers. Ideal for use in restaurants, commercial kitchens and catering environments, this pad ensures professional documentation of safety checks and compliance work.

Regin DO NOT OPERATE Tags (Pack of 8) REGP94

The Regin DO NOT OPERATE Tags (Pack of 8) REGP94 are designed to provide a clear and reliable visual warning when isolating electrical circuits. Each pack contains eight tags with cable ties, clearly marked “DO NOT OPERATE,” making them ideal for locking out fuse spurs or other electrical appliances. These tags help prevent accidental operation, ensuring safety during maintenance and servicing. They are compatible with the Regin safe isolation kit (REGXS600), supporting professional lockout procedures and compliance with safety regulations.

Regin Pipe Label HOT WATER - REGQ632

The Regin Pipe Label HOT WATER (Pack of 8) REGQ632 provides clear and professional identification for hot water pipework in domestic and commercial systems. These self-adhesive labels help ensure quick and accurate recognition of pipe contents, improving safety and maintenance efficiency. Supplied in a pack of eight with easy-peel-off backing, they are simple to apply and ideal for installers, maintenance engineers, and facilities managers who require consistent and visible pipe marking. Perfect for new installations or retrofitting existing systems.

Regin Combination Pliers 1000V 160mm REGE210

The Regin Combination Pliers 1000V 160mm REGE210 are designed for safe and reliable use in electrical environments. Fully insulated and individually tested, they provide protection when working on live circuits up to 1000V. With a compact 160mm size, they offer excellent control for precision tasks while maintaining the strength needed for gripping, cutting and twisting. Ideal for electricians, plumbers and heating engineers, these pliers combine safety, durability and comfort, making them an essential tool for compliant and efficient working on site.

Regin AC Voltage Detector with Torch REGXE09

The Regin AC Voltage Detector with Torch REGXE09 is a compact and practical electrical testing tool designed to detect AC voltage without making direct contact with the conductor. Suitable for detecting voltages from 100VAC to 600VAC on 50/60Hz circuits, it provides a clear red visual indication when voltage is detected. A built-in bright flashlight also improves visibility when working in dark or poorly lit areas, making it a useful addition to any professional toolkit.

Regin Abrasive Mini Pads (5 pads per pack) REGM42

The Regin Abrasive Mini Pads (5 Pads per Pack) REGM42 offer a practical and long-lasting solution for cleaning, polishing and surface preparation. Each pad measures approximately 50 mm x 250 mm, making them ideal for reaching awkward areas around pipework, fittings and appliances. Designed for general purpose use, they are suitable for rust removal, scrubbing, blending and preparing surfaces prior to soldering or painting. The pads do not splinter, break up, or rust, and they can be washed and reused multiple times, helping to reduce waste and improve efficiency for both professionals and DIY users.

Regin Carbon Steel Cable Shears REGE225

The Regin Carbon Steel Cable Shears REGE225 are professional-grade insulated cable shears designed for safe and efficient cable cutting. Individually tested to 10,000V and rated for 1000V use, these durable shears feature hardened cutting edges and ergonomic handles for comfortable operation. Ideal for electricians and trade professionals working with hard and soft wire cables.

Regin Plumbers Swivel Back Pipe Saw REGB90

The Regin Plumbers Swivel Back Pipe Saw REGB90 is a versatile and durable saw designed specifically for plumbers, works engineers, and general workshop tasks. Its 4-position frame provides a large cutting capacity while also offering alternative positions for working in tight or restricted spaces. Supplied with a high carbon steel 300mm blade, this saw ensures precision and reliability on a variety of pipe materials. The tool-free blade change feature makes maintenance quick and convenient, making it an essential addition to any professional or DIY toolkit.

Regin 9pc Colour Coded Stubby Combination Spanner Set 6 -14mm REGB57

The Regin 9pc Colour Coded Stubby Combination Spanner Set 6–14mm REGB57 is a compact, durable and highly practical toolkit essential for engineers, installers and DIY users. Manufactured from drop-forged chrome vanadium steel, each spanner is hardened, tempered and chrome plated for excellent corrosion resistance. The polished mirror finish and bold colour coding make size identification quick and effortless, even in low-light environments. Designed in a convenient stubby format, these spanners offer improved access in confined spaces such as appliance housings, boiler casings and tight mechanical installations. Covering the most commonly used sizes from 6 mm to 14 mm, this set delivers exceptional strength, clarity and control for everyday professional use.

Regin Premier Stumpy Adjustable Wrench REGB51

The Regin Premier Stumpy Adjustable Wrench – REGB51 is a professional-quality adjustable spanner designed specifically for plumbing and heating engineers who often work in confined or hard-to-reach areas. Featuring a compact, shortened shaft, it provides excellent manoeuvrability where standard-sized wrenches cannot operate effectively. The reversible jaw allows the tool to be used both as a traditional spanner and as a pipe wrench, adding versatility to your toolkit. With both metric and imperial scales for quick reference and a comfortable soft-grip insulated handle, this precision-made wrench is ideal for everyday use on-site. The REGB51 delivers durability, comfort, and efficiency in one dependable tool.

Regin CuttaKeep™ Automatic Pipe Cutter Holder REGB01

The Regin CuttaKeep™ Automatic Pipe Cutter Holder REGB01 is a clever and time saving storage solution designed to keep your 15mm, 22mm and 28mm automatic pipe cutters organised, protected and instantly accessible. Ideal for professional plumbers and heating engineers, the CuttaKeep™ securely docks most brands of automatic pipe cutters and protects the cutter wheel from damage when not in use. By keeping cutters visible and within easy reach, it eliminates wasted time searching through toolboxes and helps improve efficiency on every job. A built-in compartment also allows safe storage of spare cutter wheels, making this a practical and cost effective addition to any tool setup.