Regin Premier LED Headlight REGE15

The Regin Premier LED Headlight REGE15 provides convenient hands free lighting for plumbers, heating engineers and tradespeople working in areas where good visibility is essential. Powered by 19 super bright LED lights, this headlight offers four lighting functions to suit different working conditions, including single LED, seven LED, 19 LED and flashing 19 LED modes. The lamp tilts through 90 degrees, allowing the direction of the light to be adjusted to suit the task. Designed for practical everyday use, it features long life LED bulbs and solid state circuitry to help extend battery life. It operates using three AAA batteries, which are not included.

Regin 24 LED Magnetic Work Torch REGE12

The Regin 24 LED Magnetic Work Torch REGE12 is a practical portable work light designed to provide convenient illumination for plumbing, heating, maintenance and general trade applications. Featuring 24 LED bulbs, it offers a useful lighting solution when working in areas where additional visibility is required. The built in magnet on the reverse allows the light to be attached to compatible metal surfaces, while the integrated hanger provides another convenient positioning option. Its non slip surface helps provide a secure grip during use. Measuring 21 x 6 x 3cm and powered by three AAA batteries, which are not included, this compact work light is a useful addition to any tradesperson's toolkit.

Regin Leak Detection Fluid Large 1 Litre Refill REGL12

The Regin Leak Detection Fluid Large 1 Litre Refill REGL12 is a convenient 1000ml refill bottle of leak detection fluid for plumbing, heating and gas installation work. It is ideal for topping up the Regin Leak Shot bottle, helping tradespeople keep their leak detection equipment ready for use without needing to replace the complete bottle. The same quality leak detection fluid is used throughout Regin's leak detection formula range, making this a practical choice for professional engineers carrying out routine leak checks and maintenance.

Regin Green Arrow On White Direction Tape 33M REGA49

The Regin Green Arrow On White Direction Tape 33M REGA49 is designed to clearly indicate flow direction on pipework and systems. Featuring a bold green arrow on a white background, it provides high visibility and easy identification in both domestic and commercial installations. Supplied on a 33 metre roll, this tape is ideal for marking heating, water and other pipe systems to improve safety, organisation and compliance on site.

Regin Ground Source Heat Pump Service & Maintenance Pad REGP49

The Regin Ground Source Heat Pump Service & Maintenance Pad REGP49 is a professional documentation pad designed for engineers carrying out installation and servicing of ground source heat pump systems. It provides a clear and structured record of work completed, supporting compliance and best practice within the heating industry. Supplied as a triplicate pad, it allows copies to be retained by the engineer, the customer and for official records. Ideal for both domestic and commercial installations, this pad helps ensure accurate service history and transparent certification of ground source heat pump work.

Regin Decommissioned Appliance Report Pad REGP59

The Regin Decommissioned Appliance Report Pad REGP59 is a professional reporting pad designed to document the safe decommissioning of boilers and other appliances that must not be used again. It provides clear written evidence that an appliance has been taken out of service, helping engineers meet compliance requirements and protect both customers and contractors. Supplied with 25 reports in triplicate, this pad allows copies to be retained by the engineer, the customer and for official records. It is ideal for use alongside Regin REGP36 and REGP26 warning stickers to clearly mark appliances as decommissioned.

Regin Pillar Tap Washers ½ Poly (Pack Of 10) REGQ196

The Regin Pillar Tap Washers 1/2" Poly (Pack of 10) REGQ196 are reliable replacement washers designed for maintaining and repairing pillar taps. Manufactured from durable polythene material, these washers provide an effective seal to help prevent drips and leaks in tap assemblies. Supplied in a convenient pack of 10, they are ideal for plumbers, maintenance engineers and DIY users who want dependable spares readily available. Suitable for routine servicing and tap refurbishment, these washers help restore smooth operation and extend the lifespan of pillar taps in domestic and commercial installations.

Regin Pillar Tap Washers ¾ Poly (Pack Of 10) REGQ197

The Regin Pillar Tap Washers ¾ Poly (Pack of 10) REGQ197 are dependable replacement washers designed for servicing and maintaining pillar taps. Manufactured from durable polythene material, these washers provide an effective seal to help eliminate drips and restore proper shut off performance. Supplied in a convenient pack of 10, they are ideal for plumbers, maintenance engineers and DIY users who want reliable spares readily available. Suitable for use in both domestic and commercial environments, these washers offer a simple and cost effective solution for routine tap repairs.

Regin Pipe Label HEATING (Pack of 8) REGQ636

The Regin Pipe Label HEATING (Pack of 8) REGQ636 is designed to provide clear and professional identification of heating pipework within domestic and commercial systems. These labels help ensure instant recognition of pipe contents, improving safety, compliance and ease of maintenance. Supplied in a convenient pack of eight, they are ideal for installers, maintenance engineers and facilities managers who need consistent and accurate pipe marking. Suitable for new installations or retrofitting to existing systems, these labels support good practice in heating system identification.

Regin Replacement Mini Premier Gauge Filling Nozzle Grey (for REGU33 ONLY) REGU27

The Regin Replacement Mini Premier Gauge Filling Nozzle Grey (For REGU33 Only) REGU27 is a genuine replacement component designed exclusively for use with the Regin REGU33 Mini Premier Gauge. Featuring a distinctive grey top, this nozzle ensures accurate and reliable filling performance is maintained when the original nozzle becomes worn or damaged. Ideal for heating engineers and service professionals, it helps extend the working life of the REGU33 gauge while maintaining correct operation. Simple to fit and purpose made, it provides peace of mind that the gauge continues to perform as intended.

Regin Replacement Large Premier Gauge Filling Nozzle Grey (for REGU40 ONLY) REGU44

The Regin Replacement Large Premier Gauge Filling Nozzle Grey (For REGU40 Only) REGU44 is a genuine replacement component designed exclusively for the Regin REGU40 Premier 60 Gauge. The grey top nozzle ensures accurate and reliable filling performance is maintained when the original nozzle becomes worn or damaged. Ideal for heating engineers and service professionals, this replacement part allows the gauge to continue functioning correctly without the need for a full gauge replacement. Easy to fit and purpose made, it guarantees compatibility and durability for ongoing use in heating systems.

Regin Braided Glass Yarn 10mm x 5mtr Black REGY22

The Regin Braided Glass Yarn 10mm x 5mtr Black REGY22 is a robust and flexible stove rope, designed for sealing and insulating stoves, fireplaces, and other high-temperature applications. Made from premium braided glass yarn, it provides excellent heat resistance and maintains a secure seal, preventing air leaks and improving stove efficiency. Supplied in a 5-metre roll, this black stove rope is ideal for maintenance, repairs, or new installations, ensuring long-lasting performance and a professional finish.

Regin Braided Glass Yarn 12mm x 5mtr Black REGY24

The Regin Braided Glass Yarn 12mm x 5mtr Black REGY24 is a durable and flexible stove rope, designed for sealing and insulating stoves, fireplaces, and other high-temperature applications. Made from premium braided glass yarn, it offers excellent heat resistance and creates a reliable seal that prevents air leaks and improves efficiency. Supplied in a 5-metre roll, this black stove rope is ideal for maintenance, repairs, or new installations, providing long-lasting performance and a professional finish.

Regin Air Source Heat Pump Service & Maintenance Pad REGP48

The Regin Air Source Heat Pump Service & Maintenance Pad REGP48 is a purpose-designed documentation pad for engineers involved in the servicing and installation of air source heat pump systems. It provides clear, professional certification of both installation and ongoing maintenance work, helping ensure compliance and accurate record keeping. Supplied in a convenient triplicate format, this pad allows engineers to retain copies for themselves, the customer and official records. Ideal for use in domestic and commercial settings, it supports best practice by making service history easy to record, track and reference.

Regin 300mm Extension Drill Bar (For T78 Hex Brush) REGT68

The Regin 300mm Extension Drill Bar For T78 Hex Brush is designed to extend the reach of the Regin REGT78 filament hex brush, making it easier to access deep or hard to reach areas during cleaning and preparation tasks. With a robust 300mm length, this extension bar allows for improved efficiency when working inside pipes, ducts or confined spaces. It is engineered for secure and stable operation, ensuring consistent performance when used with compatible drill driven brush systems. Supplied complete with fixing components, it offers a simple and reliable solution for extending cleaning capability on site.

Regin Fin Straightening Comb REGT74

The Regin Fin Straightening Comb REGT74 is a compact and practical maintenance tool designed to restore bent or damaged fins on heat pumps, radiators, and other appliances that rely on heat dissipation. By realigning the fins, it helps maintain optimal airflow and thermal efficiency, improving system performance and extending component life. The comb features multiple fin spacing options, making it suitable for a variety of heat exchangers and cooling systems. A must-have tool for HVAC engineers, plumbers, and maintenance professionals.

Regin Quad Pipe Cleaning Brush REGT44

The Regin Quad Pipe Cleaning Brush REGT44 is a professional-quality tool designed to clean and deburr copper pipes quickly and effectively. Suitable for both 15mm and 22mm pipes, this brush prepares copper surfaces perfectly for soldering, fluxing, or swaging. By ensuring a clean and smooth pipe finish, it helps achieve stronger, leak-free joints. Ideal for plumbers and heating engineers, the Regin quad brush is a durable and reliable addition to any toolkit, saving time while improving the quality of installations.

Regin Multi-Purpose Smooth Hand Wipes (Tub of 100) REGW51

The Regin REGW51 Smooth Hand Wipes offer effective cleaning without abrasion. Anti-bacterial and multi-purpose, they come in a handy tub of 100 – perfect for tradespeople and everyday use.

Regin FLOW White/Green Tape - 33m REGA32

Regin FLOW White/Green Tape (33m x 38mm) is a durable marking solution designed for clear identification of flow directions in plumbing, heating, and mechanical systems. Its distinct white and green colour scheme ensures high visibility, improving system organisation and safety. The 33-metre roll offers ample length for professional installations, making it an essential tool for clear and effective system labelling.

Regin RETURN White/Green Tape - 33m REGA33

Regin RETURN White/Green Tape (33m x 38mm) is a professional-grade marking solution designed to indicate return flow directions in plumbing, heating, and mechanical systems. Its bold white and green design ensures clear visibility, simplifying system maintenance and improving organisation. The durable 33-metre roll provides ample coverage, making it a reliable tool for professional installations.

Regin Red/White Arrow Direction Tape - 33m REGA47

Regin Red/White Arrow Direction Tape (33m x 38mm) is a versatile and durable solution for marking flow directions and system components in plumbing, heating, and mechanical installations. The bold red and white arrow design ensures clear visibility, while the high-quality adhesive provides secure attachment to various surfaces. Ideal for professional use, this 33-metre roll is suitable for a wide range of marking applications.

Regin Discreet White Warning - Compartment Sticker (Pack of 8) REGP14

Regin Discreet White Compartment Stickers (Pack of 8) are designed to provide essential safety warnings while maintaining a clean and unobtrusive appearance. Created as an alternative to the REGP15 sticker, these stickers minimise visual impact, blending seamlessly with boiler surfaces. They warn users about the dangers of blocking ventilation and storing items in compartments or airing cupboards, ensuring compliance and safety without compromising aesthetics.

Regin Appliance Settings Caution Stickers (Pack Of 8) REGP22

Regin Appliance Settings Caution Stickers (Pack of 8) are designed to alert users and service personnel to avoid altering system settings. Featuring a strong adhesive for secure application, these cautionary stickers help maintain system integrity by discouraging unwanted changes. Ideal for boilers, heating systems, and other appliances requiring fixed configurations.

Regin Oil Fired Vaporising Appliance Service & Commissioning Pad REGPO12

The Regin Oil Fired Vaporising Appliance Service & Commissioning Pad (REGPO12) is a unique and essential tool for professional engineers servicing and commissioning oil and bio-liquid (HVO) fired vaporising appliances. With 25 reports in triplicate, it provides formal documentation of maintenance activities, risk identification, and compliance with BS 5410 Part 1 2019. Pre-printed terms and conditions ensure clarity for both engineers and customers.

Regin Liquid Fuel Common Fault Report Pad REGPO15

The Regin Liquid Fuel Common Fault Report Pad (REGPO15) simplifies documenting faults during the servicing and commissioning of liquid fuel systems, including oil-fired appliances. With a time-saving tick-box format, it allows engineers to quickly record potential and immediate risks. Comprising 25 triplicate reports, it includes pre-printed terms and conditions, ensuring compliance with BS 5410 Parts 1 & 2 and offering valuable litigation protection.

Regin M8 Brass Pressure Test Point REGQ161

The Regin M8 Brass Pressure Test Point (REGQ161) is a high-quality component designed for precise and reliable pressure testing in various applications. Manufactured from durable brass, it ensures a secure and long-lasting connection, making it ideal for professional use in heating and plumbing systems.

Regin RETURN Black/Yellow Tape - 33m REGA23

Regin RETURN Black/Yellow Tape (33m x 38mm) is a durable, high-visibility marking tape designed to clearly indicate return flow directions in plumbing, heating, and mechanical systems. The bold black and yellow pattern ensures easy identification, promoting better system organisation and safety. This reliable 33-metre roll is a practical choice for professional installers who require effective system labelling solutions.

Regin High Temperature Silicone Sealant Clear 80ml REGZ76

The Regin High Temperature Silicone Sealant Clear 80ml REGZ76 is a high-performance general-purpose sealant designed for applications requiring excellent heat resistance and flexibility. Suitable for metal, glass, and glazed ceramics, it cures at room temperature and provides a durable, long-lasting seal in demanding environments with temperatures ranging from -60°C to +225°C.

Regin 6 Way Socket C/w Strain Relief White/Blue - REGE106

The Regin 6 Way Socket (REGE106) is a high-quality connector designed to improve the efficiency of boiler wiring, offering added security with strain relief and a locking latch. Ideal for both residential and commercial boiler systems.

Regin Yellow Hi-Viz Silicone Tube (6mm ID) REGU98

Enhance visibility and safety with Regin's Hi-Viz Silicone Tube. This 2-metre length tubing, with a 6mm internal diameter, is designed for use with gas readings in manometers. The vibrant yellow colour ensures better visibility compared to standard tubing. It is suitable for high-temperature applications, with a capacity to withstand temperatures up to 150°C.

Regin Multicolour Hex Allen Key Set XL Ball 9pcs REGB38

The Regin Multicolour Hex Allen Key Set XL Ball offers a comprehensive selection of 9 toughened S2 steel hex keys. Individually sleeved for comfort and slip resistance, these keys feature a ball-ended design for versatile use. The matte finish adds durability, and the set comes with a bonus magnetiser for added convenience.

Regin Premier Case/Carry Holdall For K30 Pump REGK55

The REGK55 Premier Case/Carry Holdall is expertly designed to accommodate the Regin pressure vessel hand pump and its related accessories. With fixed internal straps to secure the pump during transport, this padded and water-resistant holdall keeps your tools safe and dry.

Regin Flexi Square Head Multi Driver ¼" REGB28

The Regin Flexi Square Head Multi Driver ¼" REGB28 is a versatile and practical tool designed for engineers and trade professionals who need flexible access in awkward or restricted spaces. Featuring a flexible shaft and a universal ¼" square head, this multi-driver allows you to use your existing ¼" sockets and bits without the need to invest in additional tooling. Ideal for maintenance, installation, and repair work, it offers convenience, adaptability, and reliability in one compact solution.

Regin 10mm Nut Driver (Flexible Shaft) REGU81

The Regin 10mm Nut Driver (Flexible Shaft) REGU81 is the perfect tool for removing gas test nipples during gas tightness tests. Its flexible shaft and built-in 10mm fixed hex end make it a versatile and essential companion for gas engineers and professionals.

Regin Extra Long 15m Drain Down Hose & Bag REGR15

Our 15 Metre drain down hose is made from actual formed rubber, NOT the imitation plastic rubber you see in cheaper drain down hoses. This 15 Metre hose is also perfect when stored away in the REGR08, which will keep it tidy and drip free in your work van after use. Our hoses now are printed with the 'REGIN' logo across the length of the hose to prevent copies of the original hose.

Regin Tubing & Cable Storage Zip Bag REGR08

The Regin Tubing & Cable Storage Zip Bag REGR08 is a durable and practical storage solution designed to keep hoses, tubing, and cables neatly organised during transport and storage. Manufactured from high-quality Oxford cloth with a water-resistant finish, it helps protect equipment from dirt and moisture while reducing tangles. Ideal for storing drain down hose kits, plumbing tubing, or EV charging cables, this lightweight zip bag is an essential accessory for professional tradespeople.

Regin Sealing Yarn Fixative 120ml With Nozzle REGY30

The Regin Sealing Yarn Fixative 120ml With Nozzle REGY30 is a high-performance adhesive designed for securing glass yarn to metal or glass surfaces. Supplied in a 120ml container with a convenient nozzle applicator, it allows precise application and ensures a strong, durable bond. Heat resistant up to 850°C, this fixative is ideal for stoves, fireplaces, and other high-temperature installations. Its large size provides excellent value for money, making it a practical choice for both professional installers and DIY enthusiasts.

Regin Silicone Grease (WRAS Approved) - 50ml REGZ40

Regin Silicone Grease (WRAS Approved) – 50ml REGZ40 is a high-performance, water-repellent silicone grease designed for professional use in plumbing, heating, and electrical systems. Supplied in a handy 50g tube, this non-melting, odourless, and tasteless grease is ideal for use with potable water and electrical insulation applications. Approved by WRAS, it ensures safe, effective lubrication for components such as tap cartridges, O-rings, and boiler seals.

Regin 2 Pole Tester C/W Led & Spring Load Shrouds REGXS150

REGXS150 - Regin Two Pole Tester c/w LED & Spring Load Shrouds The REGXS150 is a simple to use two pole voltage tester capable of measuring AC and DC voltages. It incorporates a number of features that make it safer and easier to use than many other two pole tester on the market.

Regin Contact Hazardous Voltage Detector REGXS19

The UK designed REGXS19 is a dual function hazardous voltage and live phase finder which will detect if voltages greater than 50VAC are present in order to protect operatives from dangerous live circuits, direct contact or leakage situations at electrical cabinets, street lighting columns and wooden, concrete and metal poles that carry live overhead supplies.   Identification of Live Phase conductors: as the REGXS19 uses direct contact for measuring (using the safest method known - capacitive coupling), the identification of the Live Phase is more certain than using Non-Contact Voltage Indicators or similar devices.   The REGXS19 is extremely safe to use as there is no need to operate touch pads or any other direct contact method to operate the unit correctly.

Regin Audible Mains Socket Tester REGXS22

REGXS22 - Regin Audible Mains Socket Tester   The testers are designed to give a quick and easy indication of correct wiring at the socket. Particular emphasis is placed on detecting very dangerous wiring conditions such as reversed live earth connections and disconnected wires.

Regin Proving Unit REGXS400

REGXS400 - Regin Proving Unit   The UK designed REGXS400 Proving Unit provides a safe and reliable means of checking the correct operation of Multimeters and two pole Voltage Indicators.   The REGXS400 is powered by 6 x AA alkaline batteries.

Regin Thermocouple Wide Slot Split Nut M10 - REGQ304

REGQ304 - Thermocouple Wide Slot Split Nut M10

Regin Thermocouple Wide Slot Split Nut 11/32" - REGQ306

REGQ306 - Thermocouple Wide Slot Split Nut 11/32"

Regin Spire Nut No. 8 U' Nut - REGQ80

REGQ80 - Spire Nut - No. 8 'U' Nut

Regin Spire Nut No. 8 Angle Nut - REGQ81

REGQ81 - Spire Nut - No. 8 Angle Nut

Regin Spire Nut No. 8 Folded - REGQ82

REGQ82 - Spire Nut - No. 8 Folded

Regin Spire Nut No. 8 Dished - REGQ83

REGQ83 - Spire Nut - No. 8 Dished

Regin Non-Dom Oil-Fired Appliance Service & Insp. Pad REGPO21

REGPO21 - NON-DOM OIL-FIRED APPLIANCE SERVICE & INSP. PAD    PO21 FAQ Q;        Which pad should I have to record the servicing of a commercial two stage oil burner? A;         REGIN form PO21   Q;        Why does the new REGIN PO21 pad say “Liquid Fuel Supply system inspected at appliance”? A;         When servicing a commercial liquid fuel burner, the upstream fuel storage and supply system (external to the plant room) inspection and maintenance may well be the responsibility of other persons. The responsibilities of non-domestic engineers have been clarified in the new British Standard BS 5410 Part 2.

Regin Non-Dom Oil Storage & Supply Inspection Pad REGPO23

NON-DOM OIL STORAGE & SUPPLY INSPECTION PAD & INSP. PAD PO23 FAQ Q;        Which pad should I use when inspecting an oil storage tank at a village church, pub, community centre, etc.? A;         as these are non-domestic locations then REGIN form PO23 should be completed.

Regin 1/2" Fibre Washer Y.I.F - REGQ121

REGQ121 - 1/2" Fibre Washer Y.I.F

Regin 1/2"Cap & Lining Washer - REGQ122

REGQ122 - 1/2"Cap & Lining Washer

Regin 3/4" Cap & Lining Washer - REGQ123

REGQ123 - 3/4" Cap & Lining Washer

Regin 1/2" Ballvalve Seating Washer - REGQ124

REGQ124 - 1/2" Ballvalve Seating Washer

Regin Flow Cup (With Splash Guard) REGM33

REGM33 - Flow Cup (with Splash Guard)

Regin Flared 10mm Elbow (2 Nuts) REGO110

REGO110 - Flared 10mm Elbow (2 Nuts)

Regin Flared 10mm Elbow X 1/4 Bspt (1 Nut) REGO113

REGO113 - Flared 10mm Elbow x 1/4 bspt (1 Nut)

Regin Flared 10mm Union X 1/4 Bspt (1 Nut) REGO119

REGO119 - Flared 10mm Union x 1/4 bspt (1 Nut)

Regin Danger Do Not Use Sticker/Tag With Engineer Detail Panel (8) REGP26

REGP26 – Danger – Do Not Use Sticker / Tag  

Regin Commercial Catering Appliance Gas Safety Inspection Report Pad REGP57

The Regin Commercial Catering Appliance Gas Safety Inspection Report Pad REGP57 is designed for recording gas safety inspections on commercial catering equipment. Supplied as a pad of 25 duplicate (2-part) reports, it allows engineers to provide a clear record for both themselves and their customers. Ideal for use in restaurants, commercial kitchens and catering environments, this pad ensures professional documentation of safety checks and compliance work.

Regin DO NOT OPERATE Tags (Pack of 8) REGP94

The Regin DO NOT OPERATE Tags (Pack of 8) REGP94 are designed to provide a clear and reliable visual warning when isolating electrical circuits. Each pack contains eight tags with cable ties, clearly marked “DO NOT OPERATE,” making them ideal for locking out fuse spurs or other electrical appliances. These tags help prevent accidental operation, ensuring safety during maintenance and servicing. They are compatible with the Regin safe isolation kit (REGXS600), supporting professional lockout procedures and compliance with safety regulations.

Regin Warning - Immediate Risk Do Not Use (Liquid Fuel) Sticker/Tag X8 REGPL02

REGPL02 Oil/Liquid Fuel Immediate Risk Do Not Use Sticker  

Regin Magfoot Cob Worklight REGE60

REGE60 – 10W COB LED Magfoot Rechargeable Site Light   COB LED lights emit a purer source of light than other LED’s in the market. One single light source means 1 shadow, unlike multiple SMD LED’s.

Regin Key-Ring Silver With Metal Cord REGK74

REGK74 - Regin Key Ring  

Regin Gas & Water Jointing Compound - 250g REGM20

REGM20 - Gas & Water Jointing Compound  

Regin Grip Spin Finger Drivers (Set of 3) REGK44

The Regin Grip Spin Finger Drivers (Set of 3) REGK44 offer compact and practical solutions for working in tight spaces such as boiler casings and confined areas. Supplied as a set of three colour-coded drivers with knurled edges for enhanced grip, this non-ratcheting tool kit is ideal for delicate, precise jobs. Each driver includes a magnetic insert and interchangeable bits: a ¼″ slotted bit, #2 Phillips bit, and a ¼″ socket adaptor. The drivers can also be daisy chained to extend reach, making them incredibly versatile and efficient.

Regin VDE Driver Set (Interchangeable 13pcs) REGE285

A 13 piece insulated and VDE approved screwdriver set featuring an impact resistant handle with interchangeable hardened and tempered Chrome Vanadium steel shafts.

Regin Analyser Test Point Plug Single Wall REGX38

REGX38 - Analyser Test Point Plug  

Regin Red Rubber Tube REGU55

REGU55 - Rubber Tube  

Regin Flue‘n’Fire Seal 1500˚C Silicate Cement - Natural 150ml REGZ31

REGZ31 - Flue‘n’Fire Seal 1500°C Silicate Cement - Natural   Cut nozzle at 45deg at desired bead width. Once applied, gently heat dry the repaired surfaces, gradually raising the heat to full operating temperature over 3-4 hours. Please note, product may turn white & may not set if heat-cure process not applied.

Regin Flue‘n’Fire Seal 1500˚C Silicate Cement - Black 150ml REGZ32

REGZ32 - Flue‘n’Fire Seal 1500°C Silicate Cement - Black   Cut nozzle at 45deg at desired bead width. Once applied, gently heat dry the repaired surfaces, gradually raising the heat to full operating temperature over 3-4 hours. Please note, product may turn white & may not set if heat-cure process not applied.  

Regin Inspection Mirror REGT35

The Regin Inspection Mirror REGT35 is a compact and versatile inspection tool designed to help tradespeople view areas that are difficult to see directly. Featuring a 30mm diameter mirror and an all angle ball joint, the mirror can be positioned to provide a clear view from different angles. The telescopic design extends to approximately 60cm, providing additional reach when inspecting confined or awkward areas. A convenient pocket clip is also included for easy carrying.

Regin Red Rubber Tube REGU50

REGU50 - Rubber Tube  

Regin Pipe Label HOT WATER - REGQ632

The Regin Pipe Label HOT WATER (Pack of 8) REGQ632 provides clear and professional identification for hot water pipework in domestic and commercial systems. These self-adhesive labels help ensure quick and accurate recognition of pipe contents, improving safety and maintenance efficiency. Supplied in a pack of eight with easy-peel-off backing, they are simple to apply and ideal for installers, maintenance engineers, and facilities managers who require consistent and visible pipe marking. Perfect for new installations or retrofitting existing systems.

Regin PVC Insulation Tape 20m Red - REGQ642

REGQ642 - PVC Insulation Tape 20m - Red  

Regin Steel Earthing Clamp Red - REGQ235

REGQ235 - Steel Earthing Clamp - Red

Regin Steel Earthing Clamp – Blue - REGQ236

REGQ236 - Steel Earthing Clamp – Blue

Regin Piggy Back Connector Blue - REGQ240

REGQ240 - Piggy Back Connector - Blue

Regin MRT Manometer Rigid Tube REGU03

REGU03 - M.R.T. Manometer Rigid Tube  

Regin MRT Manometer Rigid Tube REGU04

REGU04 - 90 Degree Manometer Rigid Tube  

Regin PushOn Male Connector Red - REGQ210

REGQ210 - Push-On Male Connector - Red

Regin PushOn Female Connector Red - REGQ215

REGQ215 - Push-On Female Connector - Red

Regin Bullet Male Connector Red - REGQ216

REGQ216 - Bullet Male Connector - Red

Regin Bullet Female Connector Red - REGQ217

REGQ217 - Bullet Female Connector - Red

Regin Bullet Male Connector Blue - REGQ218

REGQ218 - Bullet Male Connector - Blue

Regin Bullet Female Connector Blue - REGQ219

REGQ219 - Bullet Female Connector - Blue

Regin Full Nut M5 - REGQ51

REGQ51 - Full Nut M5

Regin Wing Nut M4 - REGQ70

REGQ70 - Wing Nut M4

Regin Wing Nut M5 - REGQ71

REGQ71 - Wing Nut M5

Regin Wing Nut 1/4"BSW - REGQ75

REGQ75 - Wing Nut 1/4"BSW

Regin Full Nut M4 - REGQ50

REGQ50 - Full Nut M4

Regin Inspection Hatch 350x350mm REGH350

Regin’s range of hinged plastic inspection hatches provide a simple, low cost, high quality solution for access to building services in walls and ceilings. The plastic access panels are produced from refined high impact plastic, injection moulded into a slim profile frame, with smooth rounded corners. This provides a lightweight solution, enabling easy and rapid installation into all types of wall or ceiling construction.

Regin Inspection Hatch 450x450mm REGH450

Regin’s range of hinged plastic inspection hatches provide a simple, low cost, high quality solution for access to building services in walls and ceilings. The plastic access panels are produced from refined high impact plastic, injection moulded into a slim profile frame, with smooth rounded corners. This provides a lightweight solution, enabling easy and rapid installation into all types of wall or ceiling construction.

Regin Electrical Connector with Strain Relief 5 way REGE105

REGE105 - 5 Way Connector  

Regin Combination Pliers 1000V 160mm REGE210

The Regin Combination Pliers 1000V 160mm REGE210 are designed for safe and reliable use in electrical environments. Fully insulated and individually tested, they provide protection when working on live circuits up to 1000V. With a compact 160mm size, they offer excellent control for precision tasks while maintaining the strength needed for gripping, cutting and twisting. Ideal for electricians, plumbers and heating engineers, these pliers combine safety, durability and comfort, making them an essential tool for compliant and efficient working on site.

Regin Inspection Hatch 100x150mm REGH150

Regin’s range of hinged plastic inspection hatches provide a simple, low cost, high quality solution for access to building services in walls and ceilings. The plastic access panels are produced from refined high impact plastic, injection moulded into a slim profile frame, with smooth rounded corners. This provides a lightweight solution, enabling easy and rapid installation into all types of wall or ceiling construction.

Regin Inspection Hatch 150x150mm REGH150L

Regin’s range of hinged plastic inspection hatches provide a simple, low cost, high quality solution for access to building services in walls and ceilings. The plastic access panels are produced from refined high impact plastic, injection moulded into a slim profile frame, with smooth rounded corners. This provides a lightweight solution, enabling easy and rapid installation into all types of wall or ceiling construction.

Regin Inspection Hatch 200x200mm REGH200

Regin’s range of hinged plastic inspection hatches provide a simple, low cost, high quality solution for access to building services in walls and ceilings. The plastic access panels are produced from refined high impact plastic, injection moulded into a slim profile frame, with smooth rounded corners. This provides a lightweight solution, enabling easy and rapid installation into all types of wall or ceiling construction.

Regin Inspection Hatch 150x230mm REGH230

Regin’s range of hinged plastic inspection hatches provide a simple, low cost, high quality solution for access to building services in walls and ceilings. The plastic access panels are produced from refined high impact plastic, injection moulded into a slim profile frame, with smooth rounded corners. This provides a lightweight solution, enabling easy and rapid installation into all types of wall or ceiling construction.

Regin Inspection Hatch 300x300mm REGH300

Regin’s range of hinged plastic inspection hatches provide a simple, low cost, high quality solution for access to building services in walls and ceilings. The plastic access panels are produced from refined high impact plastic, injection moulded into a slim profile frame, with smooth rounded corners. This provides a lightweight solution, enabling easy and rapid installation into all types of wall or ceiling construction.

Regin Gas Tape 33M REGA05

Ideal for marking out gas pipe work  

Regin Latex Textured Grip Gloves REGW41

REGW41 – Work Gloves – Latex Textured Grip  

Regin Mini Premier Gauge 30MB REGU33

The REGU33 is a smaller size compared to the bigger brothers such as the REGU35 and REGU40 Gauges

Regin Top Up Hand Pump REGK60

Compact, lightweight and convenient mini pump for inflation and pressure adjustments

Regin Zoom Spout® Oiler REGZ22

Each Zoom Spout Oiler is filled with 4 fl oz (us) (118ml) of Unocal 76 Turbine Oil - a superior general purpose lubricating oil. Features a flexible, telescoping, non-conductive plastic spout that extends from approx. 7½” (190mm) to 13½” (340mm). Flash point 210°C. Zoom Spout Oilers are used all over the world by heating & ventilation engineers, maintenance personnel, mechanics, home owners and many more.

Regin One-Click Test Lead Set REGXP9

One-Click Test Lead Set REGXP9

Regin Red/Black Insulation Test Lead Set REGXP7

REGXP7 - Red/Black Insulation Test Lead Set  

Regin Multi-Thermometer with Probe REGXE70

REGXE70 - Multi-Thermometer with Probe  

Regin 3-in-1 Thermometer REGXE68

REGXE68 - 3-in-1 Thermometer  

Regin Pocket Infrared Thermometer REGXE65

REGXE65 - Pocket Infra Red Thermometer  

Regin AC Voltage Detector with Torch REGXE09

The Regin AC Voltage Detector with Torch REGXE09 is a compact and practical electrical testing tool designed to detect AC voltage without making direct contact with the conductor. Suitable for detecting voltages from 100VAC to 600VAC on 50/60Hz circuits, it provides a clear red visual indication when voltage is detected. A built-in bright flashlight also improves visibility when working in dark or poorly lit areas, making it a useful addition to any professional toolkit.

Regin Analyser Infrared Printer REGXA55

REGXA55 - Analyser Infra-red Printer

Regin Premier Sniffa Plus Combustible Gas Detector - REGX75

Sniffa Plus Gas Leak Detector Detects Methane, Natural Gas, Butane, Propane and most other combustible gases Quick and Precise 400mm long flexible probe. Supplied with protective carry case One hand operation. Rechargeable battery - Comes with UK 3 pin charger

Regin Premier Mobile CO - Carbon Monoxide Detector REGX01

Extended sensor life - 5 years. Preset alarms: 3-colour warning light: Green LED blinks when CO is 2-9 ppm. Yellow LED blinks when CO is 10-34 ppm Red LED blinks with an audible alert at 35 ppm. Vibrating alert at 35 ppm. MAX capture - continually updates highest CO reading. CO detection to 999 ppm. Auto zero activates upon turn on. Backlit display. Low battery indicator.

Regin Heavy Duty Textured Hand Wipes (70 in tube) REGW50

The Regin REGW50 Heavy Duty Wipes are dual-sided, highly absorbent, and packed with a new improved formula featuring Aloe Vera. Perfect for removing grease, paint, sealants, and more – now safer for gas engineers.  

Regin Duo Voltage Sensor REGT18

REGT18 - Duo Voltage Sensor  

Regin Volt Stick REGT16

REGT16 - Volt Stick  

Regin Crocodile Type Clamp Probes (1 pair) REGV45

REGV45 - Crocodile Type Clamp Probes  

Regin Flexible Wire Probe REGV40

REGV40 - Flexible Wire Probe  

Regin Surface Probe REGV30

REGV30 - Surface Probe  

Regin Water/Air Immersion Probe (K-Type) REGV25

REGV25 - Water/Air Immersion Probe  

Regin Differential Thermometer REGV20

REGV20 - Differential Thermometer  

Regin Pipe Contact Thermometer REGV15

REGV15 - Pipe Contact Thermometer  

Regin Water & Pipe Thermometer Kit REGV11

REGV11 - Water & Pipe Thermometer Kit

Regin Digitemp Thermometer Kit REGV10

REGV10 - Digitemp Thermometer Kit   Can be used for legionnaires testing.

Regin Multi Tool REGT04

The Regin Multi Tool REGT04 is a compact yet highly capable 15-function multi-tool designed for reliability, durability and everyday practicality. Manufactured from high quality stainless steel and fully hardened for long life, it features a lightweight aluminium and composite handle for comfortable handling during extended use. With essential tools including pliers, blades, screwdrivers, openers, a saw, a file and measuring functions, it provides a versatile solution for on-the-go tasks, outdoor activities and general maintenance work. Supplied with a belt pouch, it is ideal for keeping close at hand for camping, leisure and day-to-day jobs.

Regin Tamper Proof Commercial Rad Valve Top REGR12

The Regin Tamper Proof Commercial Radvalve Tops are. Commercial Includes 1/2", 3/4" and 1" collars. Fast easy to fit and tamper-proof. No experience or special tools are required to install them. Fits all known valves 1/2" to 1".

Regin Tamper Proof Domestic Rad Valve Tops REGR11

The Regin Tamper Proof Domestic Radvalve Tops are fast and easy to fit and tamper-proof. No experience or special tools are required to install them. Fits all known valves up to 15mm.

Regin Premier '45' Gauge - Reduced Scale 45mbar REGU35

The one and only 'Regin Premier Gauge'. Tried and tested by thousands of heating engineers all over the U.K for over 30 years and considered the gold standard of gas pressure testing through traditional means. This also means no expensive calibration costs every year as it works through gravitational readings.

Regin Premier '60' Gauge - Reduced Scale 60mbar REGU40

REGU40 - Premier 60 Manometer  

Regin J' Gauge (48"/120mbar Manometer) REGU30

REGU30 - J Gauge  

Regin RSM Pack Screws/Connectors - REGQ316

REGQ316 - RSM Pack Screws/Connectors  

Regin Thermocouple Adaptor Nut M8 X M10 - REGQ310

REGQ310 - Thermocouple Adaptor Nut M8 X M10

Regin Large 'J' Gauge (60"/150mbar Manometer) REGU32

REGU32 - Large J Gauge  

Regin Pressure Test Kit Complete REGU80

REGU80 - Pressure Test Kit Complete  

Regin Ignition Lead Connector Female Red - REGQ220

REGQ220 - Ignition Lead Connector Female - Red

Regin 3/4" Washing Machine Hose Washer - REGQ195

REGQ195 - 3/4" Washing Machine Hose Washer These fit our 3/4" Brass Caps to give a good seal 

Regin Drain Off Valve Washer (20pk) REGQ192

REGQ192 - Pack of 20 Drain Off valve Washers You never have these on the van when you need one!! Removing these is never easy when they are stuck! This handy tool is perfect for removing stuck washers - Order the Hook & Pick Set 

Regin Heat Powered Stove Fan - Black Blade REGST87

The Regin Stove Range Heat Powered Stove Fan is designed to circulate the warm air that is created by a stove operating with normal surface temperature between 65°C and 345°C. The warm air is pushed out into the living area rather than just rising to the ceiling above the stove. Improved warm air circulation results in greater heat dispersion and less fuel consumption. The stove fan does not use batteries or mains power. The specifically designed blade delivers a very broad cross section of gentle air movement. The stove fan starts automatically and adjusts its speed with the stove's temperature. It runs faster to move more air into the room as the stove heats up, and automatically slows down and stops as the stove burns down & cools. Needs no electricity. Circulates warm air throughout the room. Burn less wood. Silent operation.

Regin Heat Powered Stove Fan - Gold Blade REGST86

REGST86 - Heat Powered Stove Fan - Gold Blade  

Regin Stove Pipe Thermometer REGST75

REGST75 - Stove Pipe Thermometer  

Regin Chimney & Flue Cleaner (750g) REGST50

REGST50 - Chimney & Flue Cleaner  

Regin Brass Pressure Test Nipples - REGQ160

REGQ160 - Brass Pressure Test Nipples  

Regin Oil Appliance Servicing & Commissioning Safety Record Pad (25 in triplicate) REGPO11

REGPO11 - Oil Appliance Servicing & Commissioning Safety Record Pad   Specific FAQ's (PO11) Q;        Which pad should I use to record a service visit to a domestic oil fired boiler? A;         REGIN form PO11 for the boiler and PO13 for the oil storage and supply system.   Q;        Which pad should I use to record the commissioning of a new oil fired boiler? A;         REGIN form PO11 for the boiler and PO13 for the oil storage and supply system.

Regin Gas Testing & Purging - Domestic Pads (25 in triplicate) REGP62

REGP62 - Gas Testing & Purging - Domestic  

Regin Gas Safety Inspection Pad (50 in duplicate) REGP50

REGP50 - Gas Safety Inspection Pad  

Regin Landlords Gas Safety Record Pad (25 in triplicate) REGP45

REGP45 - Landlords Gas Safety Record Pad  

Regin Danger – Do Not Use Sticker / Tag (8 pack) REGP36

REGP36 – Danger – Do Not Use Sticker / Tag  

Regin Compressed Gas Warning Diamond Sticker REGP02

REGP02 - Compressed Gas Warning Diamond  

Regin Flammable Gas Warning Diamond Sticker REGP01

REGP01 - Flammable Gas Warning Diamond  

Regin Oil Suction Pump 600ml REGO85

Regin Oil Suction Pump 600ml  

Regin Vacuum Gauge 1/8" Thread (0 to -1000 mbar) REGO69

The Regin Vacuum Gauge 1/8" Thread (0 to -1000 mbar) REGO69 is a practical pressure measuring instrument for checking vacuum levels in suitable plumbing, heating, refrigeration and service applications. With a measurement range from 0 to -1000 mbar, it provides a clear indication of vacuum conditions during testing and diagnostic work. The gauge features a 1/8" BSP male thread with a bottom entry connection, making it suitable for compatible test equipment and installations. Its straightforward design makes it a useful addition to the toolkit of plumbers, heating engineers and other professional tradespeople.

Regin Kolor Kut Water Finding Paste 3oz Tube REGO03

REGO03 - Kolor Kut Water Finding Paste  

Regin Kolor Kut Fuel Finding Paste REGO02

REGO02 - Kolor Kut Fuel Finding Paste  

Regin Large First Aid Kit (HSE 1-5 Person) REGM46

The Regin Large First Aid Kit REGM46 is a compact and reliable solution designed to meet Health & Safety Executive (HSE) standards for small workplaces, vehicles and mobile engineers. Suitable for 1 to 5 persons, it provides essential first aid supplies for handling minor injuries and emergencies. Ideal for vans, cars and on-site use, this kit ensures compliance while offering peace of mind for tradespeople and professionals working on the move.

Regin Abrasive Mini Pads (5 pads per pack) REGM42

The Regin Abrasive Mini Pads (5 Pads per Pack) REGM42 offer a practical and long-lasting solution for cleaning, polishing and surface preparation. Each pad measures approximately 50 mm x 250 mm, making them ideal for reaching awkward areas around pipework, fittings and appliances. Designed for general purpose use, they are suitable for rust removal, scrubbing, blending and preparing surfaces prior to soldering or painting. The pads do not splinter, break up, or rust, and they can be washed and reused multiple times, helping to reduce waste and improve efficiency for both professionals and DIY users.

Regin Waterproof Stem Thermometer REGM32

REGM32 - Therma-FloCup Replacement Thermometer  

Regin Premier Therma-Flocup with Thermometer REGM31

REGM31 - Therma-FloCup  

Regin Free-Air Gauge Kit REGK75

REGK75 - Free-Air Gauge Kit  

Regin Hook & Pick Set REGK40

Regin Hook & Pick Set is a versatile five piece tool set designed for precision work where small components, seals and fittings need to be removed, positioned or marked. Manufactured from chrome vanadium steel, the set provides strength and durability for regular professional use. It is particularly useful for replacing O rings, marking tools, removing small fuses and freeing stuck or awkward parts. The compact design makes it a practical addition to a plumber's, heating engineer's or maintenance technician's toolbox, providing a selection of useful picks and hooks for detailed work.

Regin Plumbers Washer Kit REGK26

REGK26 - Plumbers Washer Kit   A selection of over 200 rubber and fibre washers for a wide variety of applications.

Regin Plumbers Electrical Kit REGK15

REGK15 - Plumbers Electrical Kit 12 commonly used fuses and electrical components needed for everyday service work.

Regin Boiler First Aid Kit REGK05

28 commonly used fixings for a wide range of major boiler manufacturer’s appliances with a further 4 Regin products needed for everyday service work. Supplied in a high quality Regin/Raaco assorted case.

Regin Fire Rated Inspection Hatch 300x300mm REGH300FR

Regin’s range of hinged plastic inspection hatches provide a simple, low cost, high quality solution for access to building services in walls and ceilings. The plastic access panels are produced from refined high impact plastic, injection moulded into a slim profile frame, with smooth rounded corners. This provides a lightweight solution, enabling easy and rapid installation into all types of wall or ceiling construction.

Regin 360 Rechargeable Inspection Lamp/Torch REGE360

REGE360 Rechargeable 360° Inspection Lamp

Regin 4pc Technician's Screwdriver Set - VDE Approved REGE275

The Regin 4pc Technician's Screwdriver Set VDE Approved REGE275 is a professional-grade insulated tool set designed for safe and precise electrical work. Manufactured with durable chrome vanadium shafts and corrosion resistant magnetic tips, this set ensures long-lasting performance and reliable fastening. VDE approved for use up to 1kV AC and 1.5kV DC, it provides essential protection when working on live circuits. Featuring contoured handles with soft rubber grips, this set offers comfort, control, and accuracy for electricians, engineers, and maintenance professionals. Set Includes 5.5mm x 125mm Slotted Screwdriver No.1 x 80mm Phillips Screwdriver No.2 x 100mm Phillips Screwdriver 140mm Mains Tester

Regin Carbon Steel Cable Shears REGE225

The Regin Carbon Steel Cable Shears REGE225 are professional-grade insulated cable shears designed for safe and efficient cable cutting. Individually tested to 10,000V and rated for 1000V use, these durable shears feature hardened cutting edges and ergonomic handles for comfortable operation. Ideal for electricians and trade professionals working with hard and soft wire cables.

Regin Premier LED Headlight REGE15

The Regin Premier LED Headlight REGE15 provides convenient hands free lighting for plumbers, heating engineers and tradespeople working in areas where good visibility is essential. Powered by 19 super bright LED lights, this headlight offers four lighting functions to suit different working conditions, including single LED, seven LED, 19 LED and flashing 19 LED modes. The lamp tilts through 90 degrees, allowing the direction of the light to be adjusted to suit the task. Designed for practical everyday use, it features long life LED bulbs and solid state circuitry to help extend battery life. It operates using three AAA batteries, which are not included.

Regin Pen Light Swivel LED REGE13

REGE13 - LED Swivel Pen Light  

Regin 24 LED Magnetic Work Torch REGE12

The Regin 24 LED Magnetic Work Torch REGE12 is a practical portable work light designed to provide convenient illumination for plumbing, heating, maintenance and general trade applications. Featuring 24 LED bulbs, it offers a useful lighting solution when working in areas where additional visibility is required. The built in magnet on the reverse allows the light to be attached to compatible metal surfaces, while the integrated hanger provides another convenient positioning option. Its non slip surface helps provide a secure grip during use. Measuring 21 x 6 x 3cm and powered by three AAA batteries, which are not included, this compact work light is a useful addition to any tradesperson's toolkit.

Regin 27 LED Home Work Light REGE11

REGE11 - 27 LED Home Work Light  

Regin Plumbers Swivel Back Pipe Saw REGB90

The Regin Plumbers Swivel Back Pipe Saw REGB90 is a versatile and durable saw designed specifically for plumbers, works engineers, and general workshop tasks. Its 4-position frame provides a large cutting capacity while also offering alternative positions for working in tight or restricted spaces. Supplied with a high carbon steel 300mm blade, this saw ensures precision and reliability on a variety of pipe materials. The tool-free blade change feature makes maintenance quick and convenient, making it an essential addition to any professional or DIY toolkit.

Regin Extra Long Screwdriver Set - 2pc REGB77

REGB77 - Extra Long Reach Screwdriver Kit  

Regin Premier 6 1/4" Insulation Stripper Pliers REGB70

REGB70 - Insulation Stripper Pliers  

Regin 9pc Colour Coded Stubby Combination Spanner Set 6 -14mm REGB57

The Regin 9pc Colour Coded Stubby Combination Spanner Set 6–14mm REGB57 is a compact, durable and highly practical toolkit essential for engineers, installers and DIY users. Manufactured from drop-forged chrome vanadium steel, each spanner is hardened, tempered and chrome plated for excellent corrosion resistance. The polished mirror finish and bold colour coding make size identification quick and effortless, even in low-light environments. Designed in a convenient stubby format, these spanners offer improved access in confined spaces such as appliance housings, boiler casings and tight mechanical installations. Covering the most commonly used sizes from 6 mm to 14 mm, this set delivers exceptional strength, clarity and control for everyday professional use.

Regin Stubby Spanner Set REGB54

The Regin Stubby Spanner Set REGB54 is a practical 9 piece combination spanner set designed for plumbing, heating, appliance servicing and general maintenance applications. Its compact stubby design makes the set particularly useful when working in confined spaces where a standard length spanner can be difficult to position and operate. Each spanner is hardened and tempered for strength, with a chrome plated finish providing corrosion resistance. WallDrive® rings offer effective contact with suitable fasteners, while the range of sizes from 6mm to 14mm provides useful coverage for a variety of smaller fixing requirements.

Regin Premier Stumpy Adjustable Wrench REGB51

The Regin Premier Stumpy Adjustable Wrench – REGB51 is a professional-quality adjustable spanner designed specifically for plumbing and heating engineers who often work in confined or hard-to-reach areas. Featuring a compact, shortened shaft, it provides excellent manoeuvrability where standard-sized wrenches cannot operate effectively. The reversible jaw allows the tool to be used both as a traditional spanner and as a pipe wrench, adding versatility to your toolkit. With both metric and imperial scales for quick reference and a comfortable soft-grip insulated handle, this precision-made wrench is ideal for everyday use on-site. The REGB51 delivers durability, comfort, and efficiency in one dependable tool.

Regin Metric Hex Key Set - (1.5mm - 10mm) REGB33

The Regin Metric Hex Key Set - (1.5mm - 10mm) REGB33 is an essential toolkit addition for tradespeople and DIY enthusiasts alike. This durable 9-piece set includes the most commonly used metric sizes, ranging from 1.5mm to 10mm. Made from high-quality S2 steel, these hex keys offer exceptional strength, wear resistance, and long service life. Whether you're assembling furniture, adjusting fittings, or working on heating appliances, this set delivers the reliability you need.

Regin Appliance Micro ¼" Square Drive Ratchet Wrench REGB27

The Regin Appliance Micro ¼" Square Drive Ratchet Wrench REGB27 is a compact and high-quality tool designed for precision work in confined spaces. Manufactured from durable stainless steel with a polished satin finish, it features a 72-tooth ultra-smooth ratchet mechanism for fine control. Ideal for appliance servicing and restricted access applications, it offers reliability and ease of use for professional engineers.

Regin CuttaKeep™ Automatic Pipe Cutter Holder REGB01

The Regin CuttaKeep™ Automatic Pipe Cutter Holder REGB01 is a clever and time saving storage solution designed to keep your 15mm, 22mm and 28mm automatic pipe cutters organised, protected and instantly accessible. Ideal for professional plumbers and heating engineers, the CuttaKeep™ securely docks most brands of automatic pipe cutters and protects the cutter wheel from damage when not in use. By keeping cutters visible and within easy reach, it eliminates wasted time searching through toolboxes and helps improve efficiency on every job. A built-in compartment also allows safe storage of spare cutter wheels, making this a practical and cost effective addition to any tool setup.