Regin Leak Detection Fluid Large 1 Litre Refill REGL12

The Regin Leak Detection Fluid Large 1 Litre Refill REGL12 is a convenient 1000ml refill bottle of leak detection fluid for plumbing, heating and gas installation work. It is ideal for topping up the Regin Leak Shot bottle, helping tradespeople keep their leak detection equipment ready for use without needing to replace the complete bottle. The same quality leak detection fluid is used throughout Regin's leak detection formula range, making this a practical choice for professional engineers carrying out routine leak checks and maintenance.

Regin Stubby Spanner Set REGB54

The Regin Stubby Spanner Set REGB54 is a practical 9 piece combination spanner set designed for plumbing, heating, appliance servicing and general maintenance applications. Its compact stubby design makes the set particularly useful when working in confined spaces where a standard length spanner can be difficult to position and operate. Each spanner is hardened and tempered for strength, with a chrome plated finish providing corrosion resistance. WallDrive® rings offer effective contact with suitable fasteners, while the range of sizes from 6mm to 14mm provides useful coverage for a variety of smaller fixing requirements.

Regin Rapid DigiDial Pressure Checker REGX11

The Regin Rapid DigiDial Pressure Checker REGX11 is a compact and easy-to-use digital pressure testing tool designed for quickly checking water pressure in domestic and commercial plumbing systems. Featuring a clear digital display and simple operation, it provides fast, accurate pressure readings, making it an essential diagnostic tool for plumbers, heating engineers, and maintenance professionals. Its portable design allows convenient use on-site for routine servicing, fault finding, and system commissioning.

Regin Jumbo Blue Rolls 2 Ply x 2 (400Mtrs X 275mm) REGW82

he Regin Jumbo Blue Rolls 2 Ply x 2 (400M x 275mm) REGW82 offer a reliable and highly absorbent solution for cleaning and maintenance tasks across a wide range of environments. Each roll provides 400 metres of material and approximately 1000 sheets, ensuring long-lasting use in busy workplaces. With a strong 2 ply construction and 275mm width, these rolls are ideal for workshops, plumbing jobs, kitchens and commercial settings where efficiency and durability are essential.

Regin Green Arrow On White Direction Tape 33M REGA49

The Regin Green Arrow On White Direction Tape 33M REGA49 is designed to clearly indicate flow direction on pipework and systems. Featuring a bold green arrow on a white background, it provides high visibility and easy identification in both domestic and commercial installations. Supplied on a 33 metre roll, this tape is ideal for marking heating, water and other pipe systems to improve safety, organisation and compliance on site.

Regin Ground Source Heat Pump Service & Maintenance Pad REGP49

The Regin Ground Source Heat Pump Service & Maintenance Pad REGP49 is a professional documentation pad designed for engineers carrying out installation and servicing of ground source heat pump systems. It provides a clear and structured record of work completed, supporting compliance and best practice within the heating industry. Supplied as a triplicate pad, it allows copies to be retained by the engineer, the customer and for official records. Ideal for both domestic and commercial installations, this pad helps ensure accurate service history and transparent certification of ground source heat pump work.

Regin Decommissioned Appliance Report Pad REGP59

The Regin Decommissioned Appliance Report Pad REGP59 is a professional reporting pad designed to document the safe decommissioning of boilers and other appliances that must not be used again. It provides clear written evidence that an appliance has been taken out of service, helping engineers meet compliance requirements and protect both customers and contractors. Supplied with 25 reports in triplicate, this pad allows copies to be retained by the engineer, the customer and for official records. It is ideal for use alongside Regin REGP36 and REGP26 warning stickers to clearly mark appliances as decommissioned.

Regin Pillar Tap Washers ½ Poly (Pack Of 10) REGQ196

The Regin Pillar Tap Washers 1/2" Poly (Pack of 10) REGQ196 are reliable replacement washers designed for maintaining and repairing pillar taps. Manufactured from durable polythene material, these washers provide an effective seal to help prevent drips and leaks in tap assemblies. Supplied in a convenient pack of 10, they are ideal for plumbers, maintenance engineers and DIY users who want dependable spares readily available. Suitable for routine servicing and tap refurbishment, these washers help restore smooth operation and extend the lifespan of pillar taps in domestic and commercial installations.

Regin Pillar Tap Washers ¾ Poly (Pack Of 10) REGQ197

The Regin Pillar Tap Washers ¾ Poly (Pack of 10) REGQ197 are dependable replacement washers designed for servicing and maintaining pillar taps. Manufactured from durable polythene material, these washers provide an effective seal to help eliminate drips and restore proper shut off performance. Supplied in a convenient pack of 10, they are ideal for plumbers, maintenance engineers and DIY users who want reliable spares readily available. Suitable for use in both domestic and commercial environments, these washers offer a simple and cost effective solution for routine tap repairs.

Regin Pipe Label HEATING (Pack of 8) REGQ636

The Regin Pipe Label HEATING (Pack of 8) REGQ636 is designed to provide clear and professional identification of heating pipework within domestic and commercial systems. These labels help ensure instant recognition of pipe contents, improving safety, compliance and ease of maintenance. Supplied in a convenient pack of eight, they are ideal for installers, maintenance engineers and facilities managers who need consistent and accurate pipe marking. Suitable for new installations or retrofitting to existing systems, these labels support good practice in heating system identification.

Regin Replacement Mini Premier Gauge Filling Nozzle Grey (for REGU33 ONLY) REGU27

The Regin Replacement Mini Premier Gauge Filling Nozzle Grey (For REGU33 Only) REGU27 is a genuine replacement component designed exclusively for use with the Regin REGU33 Mini Premier Gauge. Featuring a distinctive grey top, this nozzle ensures accurate and reliable filling performance is maintained when the original nozzle becomes worn or damaged. Ideal for heating engineers and service professionals, it helps extend the working life of the REGU33 gauge while maintaining correct operation. Simple to fit and purpose made, it provides peace of mind that the gauge continues to perform as intended.

Regin Replacement Large Premier Gauge Filling Nozzle Grey (for REGU40 ONLY) REGU44

The Regin Replacement Large Premier Gauge Filling Nozzle Grey (For REGU40 Only) REGU44 is a genuine replacement component designed exclusively for the Regin REGU40 Premier 60 Gauge. The grey top nozzle ensures accurate and reliable filling performance is maintained when the original nozzle becomes worn or damaged. Ideal for heating engineers and service professionals, this replacement part allows the gauge to continue functioning correctly without the need for a full gauge replacement. Easy to fit and purpose made, it guarantees compatibility and durability for ongoing use in heating systems.

Regin Braided Glass Yarn 6mm x 5mtr Black REGY17

The Regin Braided Glass Yarn 6mm x 5mtr Black REGY17 is a durable and flexible stove rope, designed for use in sealing and insulating stoves, fireplaces and other high-temperature applications. Made from high-quality braided glass yarn, it withstands heat and maintains its shape, providing a reliable seal that prevents air leaks and enhances efficiency. Supplied in a 5-metre pack, this black stove rope is ideal for maintenance, repair or new installations, offering a professional finish and long-lasting performance.

Regin Braided Glass Yarn 10mm x 5mtr Black REGY22

The Regin Braided Glass Yarn 10mm x 5mtr Black REGY22 is a robust and flexible stove rope, designed for sealing and insulating stoves, fireplaces, and other high-temperature applications. Made from premium braided glass yarn, it provides excellent heat resistance and maintains a secure seal, preventing air leaks and improving stove efficiency. Supplied in a 5-metre roll, this black stove rope is ideal for maintenance, repairs, or new installations, ensuring long-lasting performance and a professional finish.

Regin Braided Glass Yarn 12mm x 5mtr Black REGY24

The Regin Braided Glass Yarn 12mm x 5mtr Black REGY24 is a durable and flexible stove rope, designed for sealing and insulating stoves, fireplaces, and other high-temperature applications. Made from premium braided glass yarn, it offers excellent heat resistance and creates a reliable seal that prevents air leaks and improves efficiency. Supplied in a 5-metre roll, this black stove rope is ideal for maintenance, repairs, or new installations, providing long-lasting performance and a professional finish.

Regin Air Source Heat Pump Service & Maintenance Pad REGP48

The Regin Air Source Heat Pump Service & Maintenance Pad REGP48 is a purpose-designed documentation pad for engineers involved in the servicing and installation of air source heat pump systems. It provides clear, professional certification of both installation and ongoing maintenance work, helping ensure compliance and accurate record keeping. Supplied in a convenient triplicate format, this pad allows engineers to retain copies for themselves, the customer and official records. Ideal for use in domestic and commercial settings, it supports best practice by making service history easy to record, track and reference.

Regin 300mm Extension Drill Bar (For T78 Hex Brush) REGT68

The Regin 300mm Extension Drill Bar For T78 Hex Brush is designed to extend the reach of the Regin REGT78 filament hex brush, making it easier to access deep or hard to reach areas during cleaning and preparation tasks. With a robust 300mm length, this extension bar allows for improved efficiency when working inside pipes, ducts or confined spaces. It is engineered for secure and stable operation, ensuring consistent performance when used with compatible drill driven brush systems. Supplied complete with fixing components, it offers a simple and reliable solution for extending cleaning capability on site.

Regin Fin Straightening Comb REGT74

The Regin Fin Straightening Comb REGT74 is a compact and practical maintenance tool designed to restore bent or damaged fins on heat pumps, radiators, and other appliances that rely on heat dissipation. By realigning the fins, it helps maintain optimal airflow and thermal efficiency, improving system performance and extending component life. The comb features multiple fin spacing options, making it suitable for a variety of heat exchangers and cooling systems. A must-have tool for HVAC engineers, plumbers, and maintenance professionals.

Regin Quad Pipe Cleaning Brush REGT44

The Regin Quad Pipe Cleaning Brush REGT44 is a professional-quality tool designed to clean and deburr copper pipes quickly and effectively. Suitable for both 15mm and 22mm pipes, this brush prepares copper surfaces perfectly for soldering, fluxing, or swaging. By ensuring a clean and smooth pipe finish, it helps achieve stronger, leak-free joints. Ideal for plumbers and heating engineers, the Regin quad brush is a durable and reliable addition to any toolkit, saving time while improving the quality of installations.

Regin Silicone Grease (WRAS Approved) - 300ml REGZ41

Regin Silicone Grease (WRAS Approved) - 300ml REGZ41 is a high-quality, water-repellent, non-melting grease suitable for a wide range of applications, including electrical insulation and potable water systems. Odourless and tasteless, this versatile silicone grease comes in a convenient resealable 300ml tub, making it ideal for professional use in plumbing and heating tasks where WRAS approval is essential. Suitable for use in extreme temperatures from -40°C to +200°C.

Regin Premier Gauge Magnetic Boot With LED (For REGU35) REGU90

The Regin Premier Gauge Magnetic Boot With LED is the ideal accessory for your REGU35 (Premier 45) gauge. This durable silicone boot offers snug protection while enhancing usability with a built-in LED light and strong magnetic backing. Designed to fit all existing Premier 45 models, the boot features a 10-minute auto-off LED to illuminate dark spaces during testing and diagnostics. Batteries are included for immediate use. The magnetic feature allows the boot—and your gauge—to stick securely to boilers or metal surfaces for hands-free operation. Gauge sold separately.

Regin Multi-Purpose Smooth Hand Wipes (Tub of 100) REGW51

The Regin REGW51 Smooth Hand Wipes offer effective cleaning without abrasion. Anti-bacterial and multi-purpose, they come in a handy tub of 100 – perfect for tradespeople and everyday use.

Regin FLOW White/Green Tape - 33m REGA32

Regin FLOW White/Green Tape (33m x 38mm) is a durable marking solution designed for clear identification of flow directions in plumbing, heating, and mechanical systems. Its distinct white and green colour scheme ensures high visibility, improving system organisation and safety. The 33-metre roll offers ample length for professional installations, making it an essential tool for clear and effective system labelling.

Regin RETURN White/Green Tape - 33m REGA33

Regin RETURN White/Green Tape (33m x 38mm) is a professional-grade marking solution designed to indicate return flow directions in plumbing, heating, and mechanical systems. Its bold white and green design ensures clear visibility, simplifying system maintenance and improving organisation. The durable 33-metre roll provides ample coverage, making it a reliable tool for professional installations.

Regin Red/White Arrow Direction Tape - 33m REGA47

Regin Red/White Arrow Direction Tape (33m x 38mm) is a versatile and durable solution for marking flow directions and system components in plumbing, heating, and mechanical installations. The bold red and white arrow design ensures clear visibility, while the high-quality adhesive provides secure attachment to various surfaces. Ideal for professional use, this 33-metre roll is suitable for a wide range of marking applications.

Regin Discreet White Warning - Compartment Sticker (Pack of 8) REGP14

Regin Discreet White Compartment Stickers (Pack of 8) are designed to provide essential safety warnings while maintaining a clean and unobtrusive appearance. Created as an alternative to the REGP15 sticker, these stickers minimise visual impact, blending seamlessly with boiler surfaces. They warn users about the dangers of blocking ventilation and storing items in compartments or airing cupboards, ensuring compliance and safety without compromising aesthetics.

Regin Appliance Settings Caution Stickers (Pack Of 8) REGP22

Regin Appliance Settings Caution Stickers (Pack of 8) are designed to alert users and service personnel to avoid altering system settings. Featuring a strong adhesive for secure application, these cautionary stickers help maintain system integrity by discouraging unwanted changes. Ideal for boilers, heating systems, and other appliances requiring fixed configurations.

Regin Oil Fired Vaporising Appliance Service & Commissioning Pad REGPO12

The Regin Oil Fired Vaporising Appliance Service & Commissioning Pad (REGPO12) is a unique and essential tool for professional engineers servicing and commissioning oil and bio-liquid (HVO) fired vaporising appliances. With 25 reports in triplicate, it provides formal documentation of maintenance activities, risk identification, and compliance with BS 5410 Part 1 2019. Pre-printed terms and conditions ensure clarity for both engineers and customers.

Regin Liquid Fuel Common Fault Report Pad REGPO15

The Regin Liquid Fuel Common Fault Report Pad (REGPO15) simplifies documenting faults during the servicing and commissioning of liquid fuel systems, including oil-fired appliances. With a time-saving tick-box format, it allows engineers to quickly record potential and immediate risks. Comprising 25 triplicate reports, it includes pre-printed terms and conditions, ensuring compliance with BS 5410 Parts 1 & 2 and offering valuable litigation protection.

Regin M8 Brass Pressure Test Point REGQ161

The Regin M8 Brass Pressure Test Point (REGQ161) is a high-quality component designed for precise and reliable pressure testing in various applications. Manufactured from durable brass, it ensures a secure and long-lasting connection, making it ideal for professional use in heating and plumbing systems.

Regin RETURN Black/Yellow Tape - 33m REGA23

Regin RETURN Black/Yellow Tape (33m x 38mm) is a durable, high-visibility marking tape designed to clearly indicate return flow directions in plumbing, heating, and mechanical systems. The bold black and yellow pattern ensures easy identification, promoting better system organisation and safety. This reliable 33-metre roll is a practical choice for professional installers who require effective system labelling solutions.

Regin FLOW Black/Yellow Tape - 33m REGA22

Regin FLOW Black/Yellow Tape (33m x 38mm) is a high-visibility marking tape designed for clear identification of flow directions and system components. Its striking black and yellow design ensures it stands out, making it ideal for use in plumbing, heating, and mechanical installations. With a durable 33-metre roll, it provides a practical and reliable solution for professional installers who require clear and effective system marking.

Regin High Temperature Silicone Sealant Clear 80ml REGZ76

The Regin High Temperature Silicone Sealant Clear 80ml REGZ76 is a high-performance general-purpose sealant designed for applications requiring excellent heat resistance and flexibility. Suitable for metal, glass, and glazed ceramics, it cures at room temperature and provides a durable, long-lasting seal in demanding environments with temperatures ranging from -60°C to +225°C.

Regin 6 Way Socket C/w Strain Relief White/Blue - REGE106

The Regin 6 Way Socket (REGE106) is a high-quality connector designed to improve the efficiency of boiler wiring, offering added security with strain relief and a locking latch. Ideal for both residential and commercial boiler systems.

Regin Vessel Jet 2 12v Car/Van Lead/Adaptor REGK32

12v Vehicle charge cable for the vessel jet 2

Regin ‘Hot Tote’ Open Toolbox REGT95

No more rummaging in messy boxes for soldering bits! The Regin 'Hot Tote' Open Toolbox (REGT95) is a game-changer for any job involving heat and soldering. This clever toolbox boasts a full-on opening lid for instant tool access, a lockable drawer for keeping spares and consumables safe, and sturdy polypropylene construction to handle those workshop knocks. Why the Regin 'Hot Tote' is your soldering mate: Fully open design: See and grab exactly what you need, no more blind fumbling. Extra-secure drawer: No more lost bits and bobs, lock away those spares and sundries. Perfect for heat and soldering: Made for organising your soldering essentials with ease. Durable polypropylene build: Built to last through even the trickiest soldering jobs. Compact and portable: Take your kit on the go without a fuss.

Regin Yellow Hi-Viz Silicone Tube (6mm ID) REGU98

Enhance visibility and safety with Regin's Hi-Viz Silicone Tube. This 2-metre length tubing, with a 6mm internal diameter, is designed for use with gas readings in manometers. The vibrant yellow colour ensures better visibility compared to standard tubing. It is suitable for high-temperature applications, with a capacity to withstand temperatures up to 150°C.

Regin 2.5mm T-Handle Hex Key REGB31

The 2.5mm Small T-Handle Hex Key REGB31 is a precision tool designed for hexagon socket screws. With a compact T-handle design, it offers ease of use and precise control for various applications.

Regin Multicolour Hex Allen Key Set XL Ball 9pcs REGB38

The Regin Multicolour Hex Allen Key Set XL Ball offers a comprehensive selection of 9 toughened S2 steel hex keys. Individually sleeved for comfort and slip resistance, these keys feature a ball-ended design for versatile use. The matte finish adds durability, and the set comes with a bonus magnetiser for added convenience.

Regin Premier Case/Carry Holdall For K30 Pump REGK55

The REGK55 Premier Case/Carry Holdall is expertly designed to accommodate the Regin pressure vessel hand pump and its related accessories. With fixed internal straps to secure the pump during transport, this padded and water-resistant holdall keeps your tools safe and dry.

Regin Flexi Square Head Multi Driver ¼" REGB28

The Regin Flexi Square Head Multi Driver ¼" REGB28 is a versatile and practical tool designed for engineers and trade professionals who need flexible access in awkward or restricted spaces. Featuring a flexible shaft and a universal ¼" square head, this multi-driver allows you to use your existing ¼" sockets and bits without the need to invest in additional tooling. Ideal for maintenance, installation, and repair work, it offers convenience, adaptability, and reliability in one compact solution.

Regin 10mm Nut Driver (Flexible Shaft) REGU81

The Regin 10mm Nut Driver (Flexible Shaft) REGU81 is the perfect tool for removing gas test nipples during gas tightness tests. Its flexible shaft and built-in 10mm fixed hex end make it a versatile and essential companion for gas engineers and professionals.

Regin Extra Long 15m Drain Down Hose & Bag REGR15

Our 15 Metre drain down hose is made from actual formed rubber, NOT the imitation plastic rubber you see in cheaper drain down hoses. This 15 Metre hose is also perfect when stored away in the REGR08, which will keep it tidy and drip free in your work van after use. Our hoses now are printed with the 'REGIN' logo across the length of the hose to prevent copies of the original hose.

Regin Tubing & Cable Storage Zip Bag REGR08

The Regin Tubing & Cable Storage Zip Bag REGR08 is a durable and practical storage solution designed to keep hoses, tubing, and cables neatly organised during transport and storage. Manufactured from high-quality Oxford cloth with a water-resistant finish, it helps protect equipment from dirt and moisture while reducing tangles. Ideal for storing drain down hose kits, plumbing tubing, or EV charging cables, this lightweight zip bag is an essential accessory for professional tradespeople.

Regin Smart Metering Kit (Electrical) REGXS500

REGXS500 - Regin Smart Metering Kit (Electrical)  

Regin Electrical Safe Isolation Kit REGXS600

This kit conforms to TB118 and the amended TB118A  

Regin Glass Yarn - Braided - 6mm (5m Pack) REGY16

REGY16 - Glass Yarn - Braided - 6mm  

Regin Glass Yarn - Braided - 10mm (5m Pack) REGY21

REGY21 - Glass Yarn - Braided - 10mm  

Regin Glass Yarn - Braided - 12mm (5m Pack) REGY23

REGY23 - Glass Yarn - Braided - 12mm  

Regin Sealing Yarn Fixative - 30ml With Brush REGY25

REGY25 - Sealing Yarn Fixative – 30ml  

Regin Sealing Yarn Fixative 120ml With Nozzle REGY30

The Regin Sealing Yarn Fixative 120ml With Nozzle REGY30 is a high-performance adhesive designed for securing glass yarn to metal or glass surfaces. Supplied in a 120ml container with a convenient nozzle applicator, it allows precise application and ensures a strong, durable bond. Heat resistant up to 850°C, this fixative is ideal for stoves, fireplaces, and other high-temperature installations. Its large size provides excellent value for money, making it a practical choice for both professional installers and DIY enthusiasts.

Regin Silicone Grease (WRAS Approved) - 50ml REGZ40

Regin Silicone Grease (WRAS Approved) – 50ml REGZ40 is a high-performance, water-repellent silicone grease designed for professional use in plumbing, heating, and electrical systems. Supplied in a handy 50g tube, this non-melting, odourless, and tasteless grease is ideal for use with potable water and electrical insulation applications. Approved by WRAS, it ensures safe, effective lubrication for components such as tap cartridges, O-rings, and boiler seals.

Regin Radiator Key Ring REGR13

REGR13 - Regin Radiator Key Ring    

Regin 13mm (1/2) Brass Straight Hose Joiner (For Joining 2 X Drain-Down Hose Kits) REGR65

The 13mm (1/2") Brass straight hose joiner for the REGIN REGR09 Drain down hose.

Regin Flux Brushes X 3 REGT72

Pack of 3 x brushes  

Regin Replacement Premier 30 Screw & o Ring Set REGU28

O-Ring and Zero screw replacement for the Premier 33.

Regin Mini-Premier Gauge Bag/Sleeve (For REGU33 Only) REGU29

Premier 30 Nylon Bag

Regin Manometer Fluid - S.G.1.00 22ml REGU45

REGU45 - Manometer Fluid  

Regin Black Soft Beanie

Released by popular demand!   Originally these Regin beanie hats were released as a limited edition giveaway through our social media, but as so many people wanted one, we have decided to release these to the merchants to stock so all the trades can get there hands on one.   Our Regin branded beanie hats are 100% genuine Softex® Material, meaning super soft, super warm and comfortable to wear in the coldest of conditions.   Our beanie has even been tested at the top of Kilimanjaro!

Regin Hand Sanitising Gel 100ml REGW55

Regin hand sanitising gel

Regin Replacement One-Click Analyser Probe REGXA9

REGXA9 - Replacement One-Click Analyser Probe  

Regin Locking Off Device (Safe Isolation) REGXS10

The Regin Locking Off Device is an ideal lightweight lock suitable for electricians where safety is of the highest priority. The lock is a necessary electrical accessory for individuals wishing to prevent re-energisation during maintenance. Designed to fit most MCBs the kit consists of an easy to use combination lock which removes the need for a keyed system. The REGXS10 locking off device is an affordable alternative to much larger commonly used MCB lockout devices.

Regin Two Pole Tester (Hi/Loz) REGXS15

REGXS15 - Regin Two Pole Tester (HI/LOz)  

Regin 2 Pole Tester C/W Led & Spring Load Shrouds REGXS150

REGXS150 - Regin Two Pole Tester c/w LED & Spring Load Shrouds The REGXS150 is a simple to use two pole voltage tester capable of measuring AC and DC voltages. It incorporates a number of features that make it safer and easier to use than many other two pole tester on the market.

Regin Contact Hazardous Voltage Detector REGXS19

The UK designed REGXS19 is a dual function hazardous voltage and live phase finder which will detect if voltages greater than 50VAC are present in order to protect operatives from dangerous live circuits, direct contact or leakage situations at electrical cabinets, street lighting columns and wooden, concrete and metal poles that carry live overhead supplies.   Identification of Live Phase conductors: as the REGXS19 uses direct contact for measuring (using the safest method known - capacitive coupling), the identification of the Live Phase is more certain than using Non-Contact Voltage Indicators or similar devices.   The REGXS19 is extremely safe to use as there is no need to operate touch pads or any other direct contact method to operate the unit correctly.

Regin Audible Mains Socket Tester REGXS22

REGXS22 - Regin Audible Mains Socket Tester   The testers are designed to give a quick and easy indication of correct wiring at the socket. Particular emphasis is placed on detecting very dangerous wiring conditions such as reversed live earth connections and disconnected wires.

Regin Proving Unit REGXS400

REGXS400 - Regin Proving Unit   The UK designed REGXS400 Proving Unit provides a safe and reliable means of checking the correct operation of Multimeters and two pole Voltage Indicators.   The REGXS400 is powered by 6 x AA alkaline batteries.

Regin Thermocouple Wide Slot Split Nut M10 - REGQ304

REGQ304 - Thermocouple Wide Slot Split Nut M10

Regin Thermocouple Wide Slot Split Nut 11/32" - REGQ306

REGQ306 - Thermocouple Wide Slot Split Nut 11/32"

Regin Brass Wire Mini Brush - REGQ622

REGQ622 - Brass Wire Mini-Brush  

Regin Nylon Mini Brush - REGQ623

REGQ623 - Nylon Mini-Brush  

Regin Spire Nut No. 8 U' Nut - REGQ80

REGQ80 - Spire Nut - No. 8 'U' Nut

Regin Spire Nut No. 8 Angle Nut - REGQ81

REGQ81 - Spire Nut - No. 8 Angle Nut

Regin Spire Nut No. 8 Folded - REGQ82

REGQ82 - Spire Nut - No. 8 Folded

Regin Spire Nut No. 8 Dished - REGQ83

REGQ83 - Spire Nut - No. 8 Dished

Regin Radtrap Fluid Drainage Pad REGR10

REGR10 - Radtrap Drainage Pad

Regin Ceramic Fuse 25mm 3A - REGQ145

REGQ145 - Ceramic Fuse - 25mm 3A

Regin Ceramic Fuse 25mm 2A - REGQ146

REGQ146 - Ceramic Fuse - 25mm 2A

Regin Ceramic Fuse 25mm 5A - REGQ147

REGQ147 - Ceramic Fuse - 25mm 5A

Regin Ceramic Fuse 25mm 13A - REGQ149

REGQ149 - Ceramic Fuse - 25mm 13A

Regin Quick Blow Ceramic Fuse 32mm 500mA - REGQ157

REGQ157 - Quick Blow Ceramic Fuse - 32mm 500mA

Regin Non-Dom Oil-Fired Appliance Service & Insp. Pad REGPO21

REGPO21 - NON-DOM OIL-FIRED APPLIANCE SERVICE & INSP. PAD    PO21 FAQ Q;        Which pad should I have to record the servicing of a commercial two stage oil burner? A;         REGIN form PO21   Q;        Why does the new REGIN PO21 pad say “Liquid Fuel Supply system inspected at appliance”? A;         When servicing a commercial liquid fuel burner, the upstream fuel storage and supply system (external to the plant room) inspection and maintenance may well be the responsibility of other persons. The responsibilities of non-domestic engineers have been clarified in the new British Standard BS 5410 Part 2.

Regin Non-Dom Oil Storage & Supply Inspection Pad REGPO23

NON-DOM OIL STORAGE & SUPPLY INSPECTION PAD & INSP. PAD PO23 FAQ Q;        Which pad should I use when inspecting an oil storage tank at a village church, pub, community centre, etc.? A;         as these are non-domestic locations then REGIN form PO23 should be completed.

Regin Fibre Pump Washers - REGQ109

REGQ109 - Fibre Pump Washers

Regin Fibre Washers 1/2" - REGQ110

REGQ110 - Fibre Washers 1/2"

Regin Fibre Washers 3/4" - REGQ111

REGQ111 - Fibre Washers 3/4"

Regin Fibre Washers 1" - REGQ112

REGQ112 - Fibre Washers 1"

Regin Fibre Washer Pack Replacement Diverter Valve Washers. - REGQ115

REGQ115 - Fibre Washer Pack Replacement Diverter Valve Washers.

Regin 1/2" Flex Tap Connector Washer - REGQ120

REGQ120 - 1/2" Flex Tap Connector Washer

Regin 1/2" Fibre Washer Y.I.F - REGQ121

REGQ121 - 1/2" Fibre Washer Y.I.F

Regin 1/2"Cap & Lining Washer - REGQ122

REGQ122 - 1/2"Cap & Lining Washer

Regin 3/4" Cap & Lining Washer - REGQ123

REGQ123 - 3/4" Cap & Lining Washer

Regin 1/2" Ballvalve Seating Washer - REGQ124

REGQ124 - 1/2" Ballvalve Seating Washer

Regin Flow Cup (With Splash Guard) REGM33

REGM33 - Flow Cup (with Splash Guard)

Regin Magnet Wrist Strap REGM59

REGM59 Regin Magnetic wristband  

Regin Mag Tip Magnetic Screw Holder REGM62

REGM62 - Mag Tip Magnetic Screw Holder  

Regin Flared 10mm Elbow (2 Nuts) REGO110

REGO110 - Flared 10mm Elbow (2 Nuts)

Regin Flared 10mm Elbow X 1/4 Bspt (1 Nut) REGO113

REGO113 - Flared 10mm Elbow x 1/4 bspt (1 Nut)

Regin Flared 10mm Union X 1/4 Bspt (1 Nut) REGO119

REGO119 - Flared 10mm Union x 1/4 bspt (1 Nut)

Regin Danger Do Not Use Sticker/Tag With Engineer Detail Panel (8) REGP26

REGP26 – Danger – Do Not Use Sticker / Tag  

Regin Commercial Catering Appliance Gas Safety Inspection Report Pad REGP57

The Regin Commercial Catering Appliance Gas Safety Inspection Report Pad REGP57 is designed for recording gas safety inspections on commercial catering equipment. Supplied as a pad of 25 duplicate (2-part) reports, it allows engineers to provide a clear record for both themselves and their customers. Ideal for use in restaurants, commercial kitchens and catering environments, this pad ensures professional documentation of safety checks and compliance work.

Regin DO NOT OPERATE Tags (Pack of 8) REGP94

The Regin DO NOT OPERATE Tags (Pack of 8) REGP94 are designed to provide a clear and reliable visual warning when isolating electrical circuits. Each pack contains eight tags with cable ties, clearly marked “DO NOT OPERATE,” making them ideal for locking out fuse spurs or other electrical appliances. These tags help prevent accidental operation, ensuring safety during maintenance and servicing. They are compatible with the Regin safe isolation kit (REGXS600), supporting professional lockout procedures and compliance with safety regulations.

Regin Warning - Do Not Fill (Liquid Fuel) Sticker/Tag X8 REGPL01

REGPL01 Oil/Liquid Fuel Immediate Risk Do Not Fill Sticker    

Regin Warning - Immediate Risk Do Not Use (Liquid Fuel) Sticker/Tag X8 REGPL02

REGPL02 Oil/Liquid Fuel Immediate Risk Do Not Use Sticker  

Regin Warning Potential Risk (Liquid Fuel) Sticker/Tag X8 REGPL03

REGPL03 Oil/Liquid Fuel Potential Risk Identified Sticker  

Regin Service Reminder (Liquid Fuel) Sticker/Tag X8 REGPL04

REGPL04 Oil Appliance Serviced Sticker  

Regin Warning - This Tank Contains Kerosene Storage Tank Sticker X5 REGPL08

This Tank Contains Kerosene Storage Tank Sticker X5 REGPL08

Regin Important - This Tank Contains HVO Storage Tank Sticker X5 REGPL09

This Tank Contains HVO Storage Tank Sticker X5 REGPL09

Regin Domestic Central Heating & Hot Water System Inspection Report Pad REGPO10

REGPO10 - Domestic Central Heating & Hot Water System Inspection/Commissioning Report Pad  

Regin Magfoot Cob Worklight REGE60

REGE60 – 10W COB LED Magfoot Rechargeable Site Light   COB LED lights emit a purer source of light than other LED’s in the market. One single light source means 1 shadow, unlike multiple SMD LED’s.

Regin Replacement Lever Adaptor For REGK30 Pump REGK31

REGK31 - Pressure Vessel Pump Replacement Lever Adaptor  

Regin Free-Air Gauge Vernier REGK73

REGK73 - Free-Air Gauge Vernier  

Regin Key-Ring Silver With Metal Cord REGK74

REGK74 - Regin Key Ring  

Regin Gas & Water Jointing Compound - 250g REGM20

REGM20 - Gas & Water Jointing Compound  

Regin Traceable Underground gas Tape 50m Roll REGA01

Traceable underground 'GAS' tape 50ML Roll - REGA01       The Regin traceable underground tape for gas is the ideal tape for ensuring new builds or any piping that needs to be buried is easily detected above ground which ensures safety when working and building around vital gas lines.

Regin Traceable Underground liq Fuel Tape 50m Roll REGA02

Traceable underground 'Liquid Fuel' tape 50ML Roll - REGA02 The Regin traceable underground tape for Liquid Fuel is the ideal tape for ensuring new builds or any piping that needs to be buried is easily detected above ground which ensures safety when working and building around vital 'Oil/Liquid Fuel' lines.

Regin High Temperature Silicone Sealant Black - 80ml REGZ77

Our smaller version of the High Temperature Silicone Sealant Black is now HERE!

Regin Grip Spin Finger Drivers (Set of 3) REGK44

The Regin Grip Spin Finger Drivers (Set of 3) REGK44 offer compact and practical solutions for working in tight spaces such as boiler casings and confined areas. Supplied as a set of three colour-coded drivers with knurled edges for enhanced grip, this non-ratcheting tool kit is ideal for delicate, precise jobs. Each driver includes a magnetic insert and interchangeable bits: a ¼″ slotted bit, #2 Phillips bit, and a ¼″ socket adaptor. The drivers can also be daisy chained to extend reach, making them incredibly versatile and efficient.

Regin Brass Gas Hob Test Adaptor & 1M Hose - REGU79

Brass adapter for testing cooker inlets for pressure.  

Regin ‘One-Touch’ Multimeter - REGXE50

REGXE50 - Regin One-Touch Digital Multimeter   Fully automatic digital multimeter with true RMS   The REGXE50 One-Touch Digital Multimeter is a fully auto range meter that automatically measures AC/DC voltage, resistance as well as providing a continuity check with buzzer.

Regin Leak Shot 100ml - REGL15

Our new sized bottle of leak in a perfect 100ml size.  

Regin UK Mains Charger For Vessel Jet 2 REGK13

This is a replacement charger for the Regin Vessel jet 2 (REGK01)  

Regin VDE Driver Set (Interchangeable 13pcs) REGE285

A 13 piece insulated and VDE approved screwdriver set featuring an impact resistant handle with interchangeable hardened and tempered Chrome Vanadium steel shafts.

Regin Mains Water Pressure Test Kit REGR50

REGR50 - Mains Water Pressure Test Kit  

Regin Heat Exchanger Cleaning Blade REGT75

REGT75 - Long Cleaning Blade  

Regin Analyser Test Point Plug Single Wall Condensing Type REGX37

REGX37 - Analyser Test Point Plug - Condensing Type  

Regin Analyser Test Point Plug Single Wall REGX38

REGX38 - Analyser Test Point Plug  

Regin Analyser Test Point Plug Coaxial Flue REGX39

REGX39 - Analyser Test Point Plug  

Regin Analyser Case Small REGXA7

REGXA7 - One-Click Ratio Analyser Case    

Regin Red Rubber Tube REGU55

REGU55 - Rubber Tube  

Regin Black Neoprene Tube REGU60

REGU60 - Neoprene Tube  

Regin Black Neoprene Tube REGU65

REGU65 - Neoprene Tube  

Regin Clear Silicone Tube REGU68

REGU68 - Silicone Tube  

Regin U' Gauge Manometer REGU10

REGU10 - 12” 'U' Gauge

Regin U' Gauge Manometer REGU15

REGU15 - 18” 'U' Gauge

Regin U' Gauge Manometer REGU20

REGU20 - 24” 'U' Gauge

Regin Flue‘n’Fire Seal 1500˚C Silicate Cement - Natural 150ml REGZ31

REGZ31 - Flue‘n’Fire Seal 1500°C Silicate Cement - Natural   Cut nozzle at 45deg at desired bead width. Once applied, gently heat dry the repaired surfaces, gradually raising the heat to full operating temperature over 3-4 hours. Please note, product may turn white & may not set if heat-cure process not applied.

Regin Flue‘n’Fire Seal 1500˚C Silicate Cement - Black 150ml REGZ32

REGZ32 - Flue‘n’Fire Seal 1500°C Silicate Cement - Black   Cut nozzle at 45deg at desired bead width. Once applied, gently heat dry the repaired surfaces, gradually raising the heat to full operating temperature over 3-4 hours. Please note, product may turn white & may not set if heat-cure process not applied.  

Regin Nylon Flat Brush REGT86

REGT86 - Nylon Flat Brush  

Regin Nylon Flat Brush REGT87

REGT87 - Nylon Flat Brush  

Regin Automatic Air Vent Removal Tool REGT30

Regin Automatic Air Vent Removal Tool . The Regin AAV Removal Tool is designed to assist in the replacement of the Caleffi Robocal 502 series Automatic Air Vents, particularly where access with a normal spanner or grips is at best very difficult due to location within the appliance For easy replacement of: Caleffi Robocal 502 Series AAVs found on many Combi Boilers & Pumps Includes 7mm Bolt for awkward locations

Regin Automatic Air Vent Removal Tool REGT31

  Automatic Air Vent Removal Tool.

Regin Inspection Mirror REGT35

The Regin Inspection Mirror REGT35 is a compact and versatile inspection tool designed to help tradespeople view areas that are difficult to see directly. Featuring a 30mm diameter mirror and an all angle ball joint, the mirror can be positioned to provide a clear view from different angles. The telescopic design extends to approximately 60cm, providing additional reach when inspecting confined or awkward areas. A convenient pocket clip is also included for easy carrying.

Regin Inspection Mirror REGT40

REGT40 - Inspection Mirror – Large  

Regin Heat Exchanger Cleaning Blade REGT76

REGT76 - Short Cleaning Blade  

Regin O Ring (Metric) 25mm x 3.0mm 12 - REGQ769

REGQ769 - O-Ring (Metric) 25mm x 3.0mm (12)

Regin O Ring (Metric) 27mm x 3.0mm 12 - REGQ770

REGQ770 - O-Ring (Metric) 27mm x 3.0mm (12)

Regin O Ring (Metric) 28mm x 3.0mm 12 - REGQ771

REGQ771 - O-Ring (Metric) 28mm x 3.0mm (12)

Regin O Ring (Metric) 30mm x 3.0mm 12 - REGQ772

REGQ772 - O-Ring (Metric) 30mm x 3.0mm (12)

Regin O Ring (Metric) 32mm x 3.0mm 12 - REGQ773

REGQ773 - O-Ring (Metric) 32mm x 3.0mm (12)

Regin O Ring (Metric) 33mm x 3.0mm 12 - REGQ774

REGQ774 - O-Ring (Metric) 33mm x 3.0mm (12)

Regin O Ring (Metric) 35mm x 3.0mm 12 - REGQ775

REGQ775 - O-Ring (Metric) 35mm x 3.0mm (12)

Regin O Ring (Metric) 36mm x 3.0mm 12 - REGQ776

REGQ776 - O-Ring (Metric) 36mm x 3.0mm (12)

Regin O Ring (Metric) 38mm x 3.0mm 12 - REGQ777

REGQ777 - O-Ring (Metric) 38mm x 3.0mm (12)

Regin O Ring (Metric) 38mm x 4.0mm 9 - REGQ778

REGQ778 - O-Ring (Metric) 38mm x 4.0mm (9)

Regin O Ring (Metric) 42mm x 4.0mm 9 - REGQ779

REGQ779 - O-Ring (Metric) 42mm x 4.0mm (9)

Regin O Ring (Metric) 45mm x 4.0mm 9 - REGQ780

REGQ780 - O-Ring (Metric) 45mm x 4.0mm (9)

Regin Jubilee Hose Clip c/w Wing Screw 13-20mm - REGQ820

REGQ820 - Jubilee Hose Clip c/w Wing Screw

Regin Jubilee Hose Clip c/w Wing Screw 17-25mm Diameter - REGQ825

REGQ825 - Jubilee Hose Clip c/w Wing Screw

Regin Jubilee Hose Clip c/w Wing Screw 25-35mm Diameter - REGQ835

REGQ835 - Jubilee Hose Clip c/w Wing Screw

Regin Replacement Premier Gauge Filling Nozzle REGU37

REGU37 - Replacement Premier Gauge filling Nozzle  

Regin Replacement Premier Gauge Filling Nozzle REGU34

Regin Replacement Premier Gauge Filling Nozzle . Available in Blue or Grey

Regin Red Rubber Tube REGU50

REGU50 - Rubber Tube  

Regin O Ring (Metric) 7mm x 2.0mm 17 - REGQ755

REGQ755 - O-Ring (Metric) 7mm x 2.0mm (17)

Regin O Ring (Metric) 8mm x 2.0mm 17 - REGQ756

REGQ756 - O-Ring (Metric) 8mm x 2.0mm (17)

Regin O Ring (Metric) 10mm x 2.0mm 17 - REGQ757

REGQ757 - O-Ring (Metric) 10mm x 2.0mm (17)

Regin O Ring (Metric) 10mm x 2.5mm 14 - REGQ758

REGQ758 - O-Ring (Metric) 10mm x 2.5mm (14)

Regin O Ring (Metric) 11mm x 2.5mm 14 - REGQ759

REGQ759 - O-Ring (Metric) 11mm x 2.5mm (14)

Regin O Ring (Metric) 12mm x 2.5mm 14 - REGQ760

REGQ760 - O-Ring (Metric) 12mm x 2.5mm (14)

Regin O Ring (Metric) 14mm x 2.5mm 14 - REGQ761

REGQ761 - O-Ring (Metric) 14mm x 2.5mm (14)

Regin O Ring (Metric) 16mm x 2.5mm 14 - REGQ762

REGQ762 - O-Ring (Metric) 16mm x 2.5mm (14)

Regin O Ring (Metric) 17mm x 2.5mm 14 - REGQ763

REGQ763 - O-Ring (Metric) 17mm x 2.5mm (14)

Regin O Ring (Metric) 19mm x 2.5mm 14 - REGQ764

REGQ764 - O-Ring (Metric) 19mm x 2.5mm (14)

Regin O Ring (Metric) 19mm x 3.0mm 12 - REGQ765

REGQ765 - O-Ring (Metric) 19mm x 3.0mm (12)

Regin O Ring (Metric) 20mm x 3.0mm 12 - REGQ766

REGQ766 - O-Ring (Metric) 20mm x 3.0mm (12)

Regin O Ring (Metric) 22mm x 3.0mm 12 - REGQ767

REGQ767 - O-Ring (Metric) 22mm x 3.0mm (12)

Regin O Ring (Metric) 24mm x 3.0mm 12 - REGQ768

REGQ768 - O-Ring (Metric) 24mm x 3.0mm (12)

Regin O Ring (Imperial) 1 1/16” x 1/8” - REGQ720

REGQ720 - O-Ring (Imperial) 1 1/16” x 1/8”

Regin O Ring (Imperial) 1 1/8” x 1/8” - REGQ721

REGQ721 - O-Ring (Imperial) 1 1/8” x 1/8”

Regin O Ring (Imperial) 1 3/16” x 1/8” - REGQ722

REGQ722 - O-Ring (Imperial) 1 3/16” x 1/8”

Regin O Ring (Imperial) 1 1/4” x 1/8” - REGQ723

REGQ723 - O-Ring (Imperial) 1 1/4” x 1/8”

Regin O Ring (Imperial) 1 5/16” x 1/8” - REGQ724

REGQ724 - O-Ring (Imperial) 1 5/16” x 1/8”

Regin O Ring (Imperial) 1 3/8” x 1/8” - REGQ725

REGQ725 - O-Ring (Imperial) 1 3/8” x 1/8”

Regin O Ring (Imperial) 1 7/16” x 1/8” - REGQ726

REGQ726 - O-Ring (Imperial) 1 7/16” x 1/8”

Regin O Ring (Imperial) 1 1/2” x 1/8” - REGQ727

REGQ727 - O-Ring (Imperial) 1 1/2” x 1/8”

Regin O Ring (Imperial) 1 1/2” x 3/16” - REGQ728

REGQ728 - O-Ring (Imperial) 1 1/2” x 3/16”

Regin O Ring (Imperial) 1 5/8” x 3/16” - REGQ729

REGQ729 - O-Ring (Imperial) 1 5/8” x 3/16”

Regin O Ring (Imperial) 1 3/4” x 3/16” - REGQ730

REGQ730 - O-Ring (Imperial) 1 3/4” x 3/16”

Regin O Ring (Metric) 3mm x 2.0mm 18 – REGQ751

REGQ751 – O-Ring (Metric) 3mm x 2.0mm (18)

Regin O Ring (Metric) 4mm x 2.0mm 18 - REGQ752

REGQ752 - O-Ring (Metric) 4mm x 2.0mm (18)

Regin O Ring (Metric) 5mm x 2.0mm 18 - REGQ753

REGQ753 - O-Ring (Metric) 5mm x 2.0mm (18)

Regin O Ring (Metric) 6mm x 2.0mm 18 - REGQ754

REGQ754 - O-Ring (Metric) 6mm x 2.0mm (18)

Regin O Ring (Imperial) 5/16” x 1/16” - REGQ706

REGQ706 - O-Ring (Imperial) 5/16” x 1/16”

Regin O Ring (Imperial) 3/8” x 1/16” - REGQ707

REGQ707 - O-Ring (Imperial) 3/8” x 1/16”

Regin O Ring (Imperial) 3/8” x 3/32” - REGQ708

REGQ708 - O-Ring (Imperial) 3/8” x 3/32”

Regin O Ring (Imperial) 7/16” x 3/32” - REGQ709

REGQ709 - O-Ring (Imperial) 7/16” x 3/32”

Regin O Ring (Imperial) 1/2” x 3/32” - REGQ710

REGQ710 - O-Ring (Imperial) 1/2” x 3/32”

Regin O Ring (Imperial) 9/16” x 3/32” - REGQ711

REGQ711 - O-Ring (Imperial) 9/16” x 3/32”

Regin O Ring (Imperial) 5/8” x 3/32” - REGQ712

REGQ712 - O-Ring (Imperial) 5/8” x 3/32”

Regin O Ring (Imperial) 11/16” x 3/32” - REGQ713

REGQ713 - O-Ring (Imperial) 11/16” x 3/32”

Regin O Ring (Imperial) 3/4” x 3/32” - REGQ714

REGQ714 - O-Ring (Imperial) 3/4” x 3/32”

Regin O Ring (Imperial) 3/4” x 1/8” - REGQ715

REGQ715 - O-Ring (Imperial) 3/4” x 1/8”

Regin O Ring (Imperial) 13/16” x 1/8” - REGQ716

REGQ716 - O-Ring (Imperial) 13/16” x 1/8”

Regin O Ring (Imperial) 7/8” x 1/8” - REGQ717

REGQ717 - O-Ring (Imperial) 7/8” x 1/8”

Regin O Ring (Imperial) 15/16” x 1/8” - REGQ718

REGQ718 - O-Ring (Imperial) 15/16” x 1/8”

Regin O Ring (Imperial) 1” x 1/8” - REGQ719

REGQ719 - O-Ring (Imperial) 1” x 1/8”

Regin Cable Ties - REGQ611

REGQ611 - Cable Ties

Regin Pipe Label GAS - REGQ630

REGQ630 - Pipe Label - GAS  

Regin Pipe Label HOT WATER - REGQ632

The Regin Pipe Label HOT WATER (Pack of 8) REGQ632 provides clear and professional identification for hot water pipework in domestic and commercial systems. These self-adhesive labels help ensure quick and accurate recognition of pipe contents, improving safety and maintenance efficiency. Supplied in a pack of eight with easy-peel-off backing, they are simple to apply and ideal for installers, maintenance engineers, and facilities managers who require consistent and visible pipe marking. Perfect for new installations or retrofitting existing systems.

Regin Pipe Label COLD WATER - REGQ634

REGQ634 - Pipe Label - COLD WATER

Regin PVC Insulation Tape 20m Black - REGQ641

REGQ641 - PVC Insulation Tape 20m - Black  

Regin PVC Insulation Tape 20m Red - REGQ642

REGQ642 - PVC Insulation Tape 20m - Red  

Regin PVC Insulation Tape 20m Green/Yellow - REGQ643

REGQ643 - PVC Insulation Tape 20m - Green/Yellow  

Regin PVC Insulation Tape 20m Green - REGQ644

REGQ644 - PVC Insulation Tape 20m - Green  

Regin PVC Insulation Tape 20m Yellow - REGQ645

REGQ645 - PVC Insulation Tape 20m - Yellow  

Regin PVC Insulation Tape 20m Blue - REGQ646

REGQ646 - PVC Insulation Tape 20m - Blue  

Regin PVC Insulation Tape 20m White - REGQ647

REGQ647 - PVC Insulation Tape 20m - White  

Regin PVC Insulation Tape 20m Brown - REGQ648

REGQ648 - PVC Insulation Tape 20m - Brown  

Regin O Ring (Imperial) 1/8” x 1/16” - REGQ701

REGQ701 - O-Ring (Imperial) 1/8” x 1/16”

Regin O Ring (Imperial) 5/32” x 1/16” - REGQ702

REGQ702 - O-Ring (Imperial) 5/32” x 1/16”

Regin O Ring (Imperial) 3/16” x 1/16” - REGQ703

REGQ703 - O-Ring (Imperial) 3/16” x 1/16”

Regin O Ring (Imperial) 7/32” x 1/16” - REGQ704

REGQ704 - O-Ring (Imperial) 7/32” x 1/16”

Regin O Ring (Imperial) 1/4” x 1/16” - REGQ705

REGQ705 - O-Ring (Imperial) 1/4” x 1/16”

Regin PCB Support Post Type 2 - REGQ222

REGQ222 - PCB Support Post - Type 2

Regin PCB Support Post Type 3 REGQ223

PCB Support Post - Type 3

Regin PCB Support Post Type 4 REGQ224

PCB Support Post - Type 4

Regin Connector Strip 5A PVC 12 Way - REGQ230

REGQ230 - Connector Strip - 5A PVC 12 Way

Regin Connector Strip 15A PVC 12 Way - REGQ231

REGQ231 - Connector Strip - 15A PVC 12 Way

Regin Steel Earthing Clamp Red - REGQ235

REGQ235 - Steel Earthing Clamp - Red

Regin Steel Earthing Clamp – Blue - REGQ236

REGQ236 - Steel Earthing Clamp – Blue

Regin Piggy Back Connector Blue - REGQ240

REGQ240 - Piggy Back Connector - Blue

Regin MRT Manometer Rigid Tube REGU03

REGU03 - M.R.T. Manometer Rigid Tube  

Regin MRT Manometer Rigid Tube REGU04

REGU04 - 90 Degree Manometer Rigid Tube  

Regin Cable Ties - REGQ610

REGQ610 - Cable Ties

Regin Meter Union Washers 1 1/2" - REGQ188

REGQ188 - Meter Union Washers 1 1/2"

Regin Meter Union Washers 2" - REGQ189

REGQ189 - Meter Union Washers 2"

Regin Meter Sealing Disc 3/4" - REGQ180

REGQ180 - Meter Sealing Disc 3/4"  

Regin Meter Sealing Disc 1" - REGQ181

REGQ181 - Meter Sealing Disc 1"

Regin PushOn Male Connector Red - REGQ210

REGQ210 - Push-On Male Connector - Red

Regin PushOn Female Connector Red - REGQ215

REGQ215 - Push-On Female Connector - Red

Regin Bullet Male Connector Red - REGQ216

REGQ216 - Bullet Male Connector - Red

Regin Bullet Female Connector Red - REGQ217

REGQ217 - Bullet Female Connector - Red

Regin Bullet Male Connector Blue - REGQ218

REGQ218 - Bullet Male Connector - Blue

Regin Bullet Female Connector Blue - REGQ219

REGQ219 - Bullet Female Connector - Blue

Regin PCB Support Post Type 1 - REGQ221

REGQ221 - PCB Support Post - Type 1

Regin Quick Blow Glass Fuse 20mm 3.15A - REGQ142

REGQ142 - Quick Blow Glass Fuse - 20mm 3.15A

Regin Quick Blow Glass Fuse 32mm 500mA - REGQ151

REGQ151 - Quick Blow Glass Fuse - 32mm 500mA

Regin Quick Blow Glass Fuse 32mm 1A - REGQ152

REGQ152 - Quick Blow Glass Fuse - 32mm 1A

Regin Quick Blow Glass Fuse 32mm 1.5A - REGQ153

REGQ153 - Quick Blow Glass Fuse - 32mm 1.5A

Regin Quick Blow Glass Fuse 32mm 2A - REGQ154

REGQ154 - Quick Blow Glass Fuse - 32mm 2A