MacDonald Plumbing Supplies Brass ¾ Cap

The Brass 3/4" Cap is a reliable fitting designed to seal off pipe ends in plumbing and heating systems. Manufactured from durable brass, it provides a secure and leak-free connection using a simple compression fitting. Ideal for both temporary and permanent applications, it ensures dependable performance in a wide range of installations.

MacDonald Plumbing Supplies MacValve WRAS Remote Filling Loop Part L Compliant with Gauge

The MacValve WRAS Remote Filling Loop Part L Compliant with Gauge is a practical and compliant solution for filling and pressurising central heating systems and heat interface units. Designed for flexible installation, it can be fitted remotely from the boiler or cylinder, making it ideal where access is limited or no integral pressure gauge is present. Supplied complete with a gauge and essential safety components, it ensures accurate pressure monitoring and safe system operation.

Press Mate Pro Press Lubrication 150ml

The Press Mate Pro Press Lubrication 150ml is a professional-grade dry lubricant designed to improve the performance and longevity of press tools. Formulated with natural oils, it delivers smoother, more consistent crimps while protecting seals and O-rings from damage. Suitable for most press jaws, it reduces friction, wear and drag, helping engineers achieve reliable results with minimal mess on every job.

Rob Pond PressFit 22mm Perfect Pump Valve Pair

The Rob Pond PressFit 22mm Perfect Pump Valve Pair PPV22-PF provides a reliable and efficient solution for connecting circulating pumps in heating systems. Designed with 22mm M profile press connections and 1½" swivel unions, these valves allow quick installation and secure pump isolation. Manufactured from durable nickel plated brass and rated to 16 bar, they offer excellent strength and long-term reliability. Supplied as a matched pair with rubber washers, they ensure a tight seal and simplify installation for professional heating engineers.

Todays Tools Large Drip Stopper Bung DSL

The Todays Tools Large Drip Stopper Bung DSL is a practical and effective accessory designed to temporarily seal pipes and stop unwanted drips during maintenance, repairs or system flushing. Suitable for a wide range of pipe diameters from 13 mm up to 42 mm, this drip stopper bung provides a secure seal that helps prevent water wastage and keeps work areas cleaner and safer. Easy to insert and remove, it is an essential tool for plumbers, heating engineers and maintenance professionals working on domestic and commercial systems.

Todays Tools Regular Drip Stopper Bung (Pack of Two) DSR

The Todays Tools Regular Drip Stopper Bung (Pack of Two) DSR is a practical and versatile solution for temporarily sealing small pipework during maintenance, repairs or flushing operations. Supplied as a pair, these drip stopper bungs are suitable for pipes with diameters between 5 mm and 22 mm, providing a tight and reliable seal to prevent unwanted drips and leaks. Lightweight and easy to use, they help reduce water wastage, protect work areas and make servicing tasks quicker and cleaner for plumbers, heating engineers and general tradespeople.

MacDonald Plumbing Supplies MacValve Bottom Fill Valve ½ Brass Tail

The MacValve Bottom Fill Valve ½ Brass Tail is a reliable and efficient solution for modern toilet cistern installations. Designed for consistent performance, it delivers smooth and quiet water refilling, making it ideal for both domestic and commercial environments. The robust ½ brass connection ensures long lasting durability, while the bottom entry design offers a neat and discreet installation that suits a wide range of cistern types. With a quick water stop function and precise water control, this valve helps maintain efficient flushing performance and reduces unnecessary water wastage. Its WRAS approval confirms full compliance with UK water regulations, giving installers complete confidence in its quality and reliability.

MacDonald Plumbing Supplies MacValve Side Fill Valve ½ Brass Tail

The MacValve Side Fill Valve ½ Brass Tail is a reliable, high-performance side entry valve designed to deliver smooth, quiet and efficient water filling in cisterns. Built with a durable ½ inch brass connection, it ensures long-lasting strength and compatibility across a wide range of installations. This valve is easy to fit, quick to adjust and engineered for dependable shut-off, helping prevent overfilling while maintaining consistent water flow. With its WRAS approval, the MacValve Side Fill Valve offers trusted compliance and reassurance for both domestic and commercial plumbing systems.

MacDonald Plumbing Supplies MacCompression Liners for MDPE 25mm

The MacCompression Liners for MDPE 25mm are designed to provide added strength, security, and reliability when using MDPE compression fittings. Manufactured to a high standard, these pipe liners are both WRAS Approved and Kitemarked, ensuring compliance and performance in potable water applications. By reinforcing the inner wall of the MDPE pipe, they help prevent pipe deformation under compression, guaranteeing a safe and leak-free connection. Trusted by installers, these liners offer peace of mind for long-term durability in underground and above-ground installations.

Conex Bänninger CLEARANCE - Conex B Press Stop End Bundle

Conex B Press Stop End Bundle consisting of: 30 x 15mm 17 x 22mm 5 x 28mm Please note quantities may vary +/-2 Non refundable sale item

ACR Instantor R-Press ¼ Stop End PxCAP (Pack Of 3)

The R-Press ¼ Stop End PxCAP (Pack Of 3) provides a reliable, flame-free solution for capping copper pipework in refrigeration and air conditioning systems. Designed with a V-profile for precise mechanical joint connections, it creates a secure seal without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-quality refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this stop end ensures long-lasting leak-free performance. Suitable for operating temperatures from -40°C to 140°C and pressures up to 48 bar, it is UL 207 certified, meeting stringent industry safety and quality standards.

ACR Instantor R-Press ⅜ Stop End PxCAP (Pack Of 3)

The R-Press ⅜ Stop End PxCAP (Pack Of 3) provides a reliable, flame-free solution for capping copper pipework in refrigeration and air conditioning systems. Designed with a V-profile for precise mechanical joint connections, it creates a secure seal without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-quality refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this stop end ensures long-lasting leak-free performance. Suitable for operating temperatures from -40°C to 140°C and pressures up to 48 bar, it is UL 207 certified, meeting stringent industry safety and quality standards.

ACR Instantor R-Press ½ Stop End PxCAP (Pack Of 3)

The R-Press ½ Stop End PxCAP (Pack Of 3) provides a reliable, flame-free solution for capping copper pipework in refrigeration and air conditioning systems. Designed with a V-profile for precise mechanical joint connections, it creates a secure seal without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-quality refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this stop end ensures long-lasting leak-free performance. Suitable for operating temperatures from -40°C to 140°C and pressures up to 48 bar, it is UL 207 certified, meeting stringent industry safety and quality standards.

ACR Instantor R-Press ⅝ Stop End PxCAP (Pack Of 2)

The R-Press ⅝ Stop End PxCAP (Pack Of 2) provides a reliable, flame-free solution for capping copper pipework in refrigeration and air conditioning systems. Designed with a V-profile for precise mechanical joint connections, it creates a secure seal without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-quality refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this stop end ensures long-lasting leak-free performance. Suitable for operating temperatures from -40°C to 140°C and pressures up to 48 bar, it is UL 207 certified, meeting stringent industry safety and quality standards.

ACR Instantor R-Press ¾ Stop End PxCAP (Pack Of 2)

The R-Press ¾ Stop End PxCAP (Pack Of 2) provides a reliable, flame-free solution for capping copper pipework in refrigeration and air conditioning systems. Designed with a V-profile for precise mechanical joint connections, it creates a secure seal without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-quality refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this stop end ensures long-lasting leak-free performance. Suitable for operating temperatures from -40°C to 140°C and pressures up to 48 bar, it is UL 207 certified, meeting stringent industry safety and quality standards.

ACR Instantor R-Press ⅞ Stop End PxCAP (Pack Of 2)

The R-Press ⅞ Stop End PxCAP (Pack Of 2) provides a reliable, flame-free solution for capping copper pipework in refrigeration and air conditioning systems. Designed with a V-profile for precise mechanical joint connections, it creates a secure seal without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-quality refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this stop end ensures long-lasting leak-free performance. Suitable for operating temperatures from -40°C to 140°C and pressures up to 48 bar, it is UL 207 certified, meeting stringent industry safety and quality standards.

ACR Instantor R-Press 1⅛ Stop End PxCAP (Pack Of 1)

The R-Press 1⅛ Stop End PxCAP (Pack Of 1) provides a reliable, flame-free solution for capping copper pipework in refrigeration and air conditioning systems. Designed with a V-profile for precise mechanical joint connections, it creates a secure seal without the need for brazing or nitrogen purging, reducing installation time by up to 35%. Made from high-quality refrigerant grade copper (UNS C12200) with a durable HNBR O-ring, this stop end ensures long-lasting leak-free performance. Suitable for operating temperatures from -40°C to 140°C and pressures up to 48 bar, it is UL 207 certified, meeting stringent industry safety and quality standards.

MacDonald Plumbing Supplies Refill For The MacPack Press Starter Kit For Water 22mm Fittings

The Refill For The MacPack Press Pack For Water 22mm. This refill kit is tailor-made for plumbing professionals who use the MacPress system and need a fresh supply of premium 22mm copper press fittings. Designed for use in potable water, sealed heating systems, and hot water circuits, every fitting is WRAS approved and made for secure, flame-free installation. The pack includes elbows, couplings, equal tees, reducers, and reducing tees – all engineered for reliability and leak-free performance. Supplied in quantities that suit real-world installation demands, this refill pack is a smart, timesaving addition to your MacPack setup. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPack Press Starter Kit For Water 22mm Fittings

The MacPack Press Pack For Water 22mm Fittings is your complete solution for fast, safe, and professional-grade water installations. Designed around the industry-trusted MacPress M-profile press system, this pack includes a hand-picked selection of high-quality 22mm fittings, ideal for use in potable water, heating, and hot water systems. Engineered for clean, flame-free installation, the fittings require no solder, flux, or compound making them perfect for both domestic and commercial environments. Each component is WRAS approved and backed by a 20-year manufacturer’s warranty, ensuring a secure and long-lasting fit every time. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies Refill For The MacPack Press Starter Kit For Water 15mm Fittings

The MacPack Press Refill Pack For Water 15mm Fittings is ideal for topping up your stock of the most-used water press fittings. Designed to match the quality and compatibility of MacPress M profile fittings, this refill pack ensures you always have essential components on hand. With a practical selection of 15mm couplings, elbows, tees, reducers, and reducing tees, it's perfect for professionals working on potable water, hot water, and heating installations. These flame-free fittings provide a fast, clean and safe solution with reliable performance. Fully WRAS approved and BS EN compliant, this pack keeps your installations efficient and up to standard. Not suitable for use with MLCP pipe and fittings. Installation Instructions for Press Fittings 1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPack Press Starter Kit For Water 15mm Fittings

The MacPack Press Pack For Water 15mm Fittings is a purpose-built solution designed for fast, safe, and clean water installations. Ideal for both domestic and commercial applications, this all-in-one pack contains a selection of premium 15mm MacPress water press fittings including couplings, elbows, tees, reducers, and reducing tees. Thanks to its flame-free installation process, it eliminates the need for hot works while maintaining a high standard of performance and safety. Every fitting uses the reliable “M” profile for secure press connections. The included fittings are WRAS approved and manufactured to meet the highest quality and compliance standards. Backed by a 20-year manufacturer’s warranty, this pack offers peace of mind and long-term durability. Installation Instructions for Press Fittings  1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies Thermostatic Mixing Valve 22mm WRAS Approved TMV22

The Thermostatic Mixing Valve 22mm WRAS Approved TMV22 is designed to ensure safe and reliable water temperature regulation in both domestic and commercial plumbing systems. This high-performance valve blends hot and cold water to deliver a consistent, pre-set temperature, preventing the risk of scalding. Fully WRAS approved and compliant with TMV2 standards, the TMV22 is perfect for larger systems, including communal bathrooms, healthcare facilities, and care homes. It features 22mm compression ends, internal check valves, and strainers for maximum safety and performance.

MacDonald Plumbing Supplies Thermostatic Mixing Valve 15mm WRAS Approved TMV15

The Thermostatic Mixing Valve 15mm WRAS Approved TMV15 is an essential safety component for domestic and commercial plumbing systems, regulating water temperature to prevent scalding. Ideal for basins, baths, and showers, this TMV15 valve blends hot and cold water to a controlled output temperature. WRAS approved and thermostatically controlled, it delivers reliable performance and is fully compliant with TMV2 standards for healthcare and residential use. Simple to install and maintain, it enhances user safety and efficiency in water systems.

BritTherm Сirculator Pump S2 Series S2 20/12-200 (661999203)

The BritTherm S2 20/12-200 Circulator Pump is designed for use with water tanks, drawing water directly to maintain a steady and reliable supply. Made from durable stainless steel EN1.4521, this pump offers two operational modes—Manual and AUTO—suitable for domestic plumbing systems. It features a ¾" threaded connection and an integrated check valve to prevent backflow and ensure system integrity. The BritTherm Circulator Pump S2 Series S2 20/12-200 is a high-quality booster pump constructed from corrosion-resistant stainless steel EN1.4521, ideal for domestic use with water tanks. This pump is engineered to provide consistent water flow and pressure by drawing water directly from storage tanks. It operates in two modes: Manual Mode, where the pump runs continuously at a fixed shaft rotation speed until switched off, and AUTO Mode, which activates automatically when a tap is opened and stops when it is closed. This smart feature optimises energy consumption and water supply efficiency. The pump includes an integrated check valve to prevent water backflow, safeguarding the plumbing system. A simple one-button control activates the automatic function, providing reliable start/stop operation based on flow and pressure demands. Electrical and thermal protection systems enhance pump safety, reducing the risk of breakdowns due to external factors unrelated to normal pump use. Perfect for boosting potable water from tanks, the BritTherm S2 20/12-200 ensures a stable water supply throughout the home with ease and reliability.   Features & Benefits: ✅ Stainless steel EN1.4521 casing for enhanced durability and corrosion resistance ✅ Dual operating modes: Manual and AUTO for versatile control ✅ AUTO mode activates with tap opening and deactivates on closure ✅ Integrated check valve prevents backflow and protects the system ✅ Standard ¾" threaded connection for easy installation ✅ One-button automation for simple start/stop operation ✅ Electrical and thermal protection for safe and reliable use ✅ Ideal for boosting water supply from domestic water tanks

BritTherm Сirculator Pump B2 Series B2 12/10-162 (661996802)

The BritTherm B2 12/10-162 Booster Pump is designed to draw water directly from tanks, delivering reliable and consistent water pressure to showers, taps, and appliances. With manual and AUTO operating modes, this booster pump adapts to real-time demand. It features a built-in check valve, one-button automation, and built-in electrical and thermal protection for enhanced safety. Ideal for domestic systems that need stable water pressure from storage tanks. The BritTherm Circulator Pump B2 Series B2 12/10-162 is a powerful and compact domestic booster pump engineered for use with water storage tanks. Designed to provide steady water pressure across various household plumbing points, it automatically activates when a tap is opened and switches off when flow stops – perfect for improving performance in low-pressure areas. This versatile pump offers two user-selectable modes. In Manual Mode, it operates continuously until switched off, while AUTO Mode enables fully automatic operation based on flow detection and pressure drop. The pump includes a built-in check valve within the housing to prevent backflow and ensure reliable performance. Engineered with electrical and thermal protection, this pump is safe, efficient, and easy to install. A trusted solution for boosting pressure in underperforming domestic water systems.   Features & Benefits: ✅ Designed for use with water tanks for stable supply ✅ AUTO Mode activates pump based on water flow ✅ Manual Mode for continuous operation ✅ Built-in check valve prevents water backflow ✅ Simple one-button automatic programming ✅ Increases water pressure for showers and taps ✅ Thermal and electrical protection for reliability

BritTherm Сirculator Pump S2 Series S2 12/10-162 (661999202)

The BritTherm S2 12/10-162 Circulator Pump is a reliable booster pump designed specifically for use with water tanks to ensure a stable and consistent water supply. Built with a durable stainless steel EN1.4521 casing, it features dual automatic operation modes to suit domestic plumbing needs. The pump is fitted with a ¾" threaded connection for easy installation and includes an integrated check valve for efficient backflow prevention. The BritTherm Circulator Pump S2 Series S2 12/10-162 offers an intelligent solution for boosting water supply from tanks, maintaining consistent pressure and flow for household consumption. Constructed from high-quality stainless steel EN1.4521, this pump is engineered to withstand the rigours of everyday use and resist corrosion. It provides two operational programmes: Manual Mode, where the pump runs continuously until manually switched off, and AUTO Mode, which intelligently detects water flow and pressure changes, activating the pump automatically when taps open and shutting off when they close. This automatic feature ensures energy efficiency and convenience. The pump includes an integrated check valve within the casing, preventing backflow and maintaining system integrity. Electrical and thermal protection systems safeguard the pump from breakdowns caused by external faults unrelated to normal operation, ensuring reliable performance and longevity. Ideal for use with drinking water tanks, the BritTherm S2 12/10-162 enhances domestic water systems by stabilising pressure and flow for a smooth water supply.   Features & Benefits: ✅ Durable stainless steel EN1.4521 casing for long-lasting performance ✅ Dual operation modes: Manual and AUTO for flexible control ✅ Automatic start/stop based on flow and pressure changes in AUTO mode ✅ Integrated check valve prevents backflow ✅ ¾" threaded connection for simple installation ✅ Electrical and thermal protection systems for pump safety ✅ Ideal for boosting water supply from tanks in domestic plumbing

BritTherm Сirculator Pump S2 Series S2 12/9-160 (661999201)

The BritTherm S2 12/9-160 Circulator Pump is designed to work efficiently with water tanks, drawing water directly to maintain a stable and reliable supply. Made with a robust stainless steel EN1.4521 casing, this pump offers two operational modes—Manual and AUTO—tailored for domestic plumbing systems. It features a convenient ¾" threaded connection and an integrated check valve to prevent backflow. The BritTherm Circulator Pump S2 Series S2 12/9-160 provides a dependable solution for boosting water supply from tanks in residential settings. Constructed from corrosion-resistant stainless steel EN1.4521, the pump is built to deliver durability and consistent performance. This model operates in two modes: Manual Mode, where the pump runs continuously at a fixed shaft rotation speed until switched off, and AUTO Mode, which automatically activates when water flow is detected (e.g., when a tap is opened) and stops when the flow ceases. This feature optimises energy use and system efficiency. Equipped with an integrated check valve within the pump casing, it effectively prevents water backflow, protecting the system. The pump’s automation is easily controlled by a single button, providing simple start/stop operation based on water flow and pressure changes. Electrical and thermal protection systems ensure safe operation and help avoid damage caused by external factors unrelated to normal pump function. Ideal for use with drinking water tanks, the BritTherm S2 12/9-160 stabilises water pressure and flow, delivering smooth and reliable water supply throughout the home.   Features & Benefits: ✅ Stainless steel EN1.4521 casing for strength and corrosion resistance ✅ Dual operational modes: Manual and AUTO for flexible control ✅ AUTO mode responds to tap opening and closing for energy efficiency ✅ Integrated check valve to prevent backflow ✅ ¾" threaded connection for easy installation ✅ One-button automation for start/stop control ✅ Electrical and thermal protection for enhanced pump safety ✅ Suitable for boosting water supply from domestic tanks

BritTherm Booster Automatic Pump W1 Series W1 12/10-162 (661996102)

The BritTherm W1 12/10-162 booster pump is engineered to improve water pressure in residential settings where water is supplied from storage tanks. With a built-in check valve, epoxy-coated construction, and both Manual and AUTO operating modes, this smart pump ensures a consistent water supply for showers, taps, and other household fixtures. Its user-friendly design and built-in electrical and thermal protection make it a dependable choice for home water boosting. The BritTherm W1 12/10-162 is a tank-fed booster pump designed to improve water pressure in domestic plumbing systems. It features an epoxy-coated volute for increased durability and corrosion resistance, making it ideal for long-term residential use. The built-in check valve prevents backflow, while the pump's automatic start/stop functionality provides effortless operation based on real-time water demand. Offering both Manual Mode, for continuous running, and AUTO Mode, which activates when taps are opened and stops when they are closed, the W1 12/10-162 is suited to a range of household needs. A single-button setup allows easy switching between modes, delivering responsive performance while ensuring energy efficiency. With electrical and thermal protection systems in place, this pump is shielded against potential damage from external power issues, ensuring peace of mind and reliable performance for homeowners.   Features & Benefits: ✅ Enhances water pressure for home taps, showers, and appliances ✅ Designed for use with water storage tanks ✅ AUTO Mode automatically adjusts to water demand ✅ Manual Mode for continuous operation ✅ Built-in check valve prevents backflow ✅ Epoxy-coated volute for extended durability ✅ Single-button control for mode switching ✅ Compact and easy to install ✅ Electrical and thermal protection built in ✅ Ideal for improving household water flow and comfort

BritTherm Booster Automatic Pump W1 Series W1 20/12-200 (661996103)

The BritTherm W1 20/12-200 booster pump is designed to improve water pressure in residential plumbing systems. Intended for use with water tanks, this automatic pump features a built-in check valve and an epoxy-coated volute for long-lasting durability. It offers two user-selectable modes: manual for constant operation and AUTO for intelligent start/stop control triggered by tap usage. With its reliable pressure boosting and integrated safety features, it ensures consistent water supply for taps, showers, and household appliances. The BritTherm W1 20/12-200 booster pump is the ideal solution for enhancing water pressure in homes where water is supplied from storage tanks. Designed specifically for tank-fed systems, this pump includes a built-in check valve that helps prevent backflow and ensures smooth, consistent water delivery. Its epoxy-coated volute casing provides corrosion resistance and durability, making it well-suited for household environments. The pump features two simple operating modes: Manual Mode allows continuous running until manually stopped, while AUTO Mode intelligently controls the pump based on water demand—activating when taps are opened and deactivating when flow stops. Automation is easily triggered with a single button, and the system adapts to changes in pressure and flow. Electrical and thermal protection systems are built in to shield the pump from potential external damage, ensuring long-term reliability and safe operation.   Features & Benefits: ✅ Boosts household water pressure for taps, showers, and appliances ✅ Designed for use with tank-fed water supply systems ✅ AUTO Mode activates pump based on flow and pressure demand ✅ Manual Mode allows continuous operation ✅ Built-in check valve prevents backflow ✅ Epoxy-coated volute for durability and corrosion resistance ✅ Easy one-button automation for simple setup ✅ Electrical and thermal protection included for added safety ✅ Compact and efficient design for domestic installations ✅ Helps maintain consistent and reliable water supply

BritTherm Replacement Pump Head H3 Series H3 25/4 (661996502)

The BritTherm H3 25/4 Replacement Pump Head is designed to boost water pressure efficiently across household taps, showers, and other plumbing points. Equipped with a built-in check valve and an intelligent automatic start/stop programme, it adapts to changes in water flow and pressure, ensuring optimal performance and energy savings. The BritTherm Replacement Pump Head H3 Series H3 25/4 is engineered for domestic water pressure boosting with durability and smart functionality. It incorporates a built-in check valve inside the pump casing to prevent backflow and safeguard the system. The pump offers two operational modes: Manual Mode, providing a constant shaft speed until switched off manually, and AUTO Mode, which activates automatically when a tap is opened and stops when the tap closes, reacting swiftly to fluctuations in water flow and pressure. The pump’s volute casing is epoxy-coated for long-lasting corrosion resistance. Simple, single-button automation controls the pump in start/stop mode, making it user-friendly. These pumps are ideally paired with water tanks supplying potable water, delivering consistent pressure and improved water flow. Electrical and thermal protection features guard the pump against external damage, increasing reliability and lifespan.   Features & Benefits: ✅ Built-in check valve prevents backflow and protects the system ✅ AUTO Mode offers automatic start/stop based on water usage ✅ Manual Mode allows constant operation at fixed speed ✅ Epoxy-coated volute enhances durability and corrosion resistance ✅ Easy single-button activation for automated control ✅ Ideal for boosting water pressure to household taps and showers ✅ Suitable for use with drinking water tanks ✅ Electrical and thermal protection for extended pump life

MacDonald Plumbing Supplies MacSolder Ring Stop End 35mm

The MacSolder Ring Stop End 35mm is a high-quality copper fitting designed for sealing off the end of a pipe in plumbing and heating systems. Manufactured with lead-free solder and WRAS approved, this stop end is ideal for use with potable water, central heating, and gas systems. The integrated pre-soldered ring allows for fast and secure connections without the need for additional solder, reducing installation time and ensuring a clean, professional finish. This 35mm stop end is particularly useful in tight spaces and is a cost-effective solution for residential or commercial plumbing projects.

MacDonald Plumbing Supplies MacSolder Ring Stop End 42mm

The MacSolder Ring Stop End 42mm is a high-quality copper fitting designed for sealing off the end of a pipe in plumbing and heating systems. Manufactured with lead-free solder and WRAS approved, this stop end is ideal for use with potable water, central heating, and gas systems. The integrated pre-soldered ring allows for fast and secure connections without the need for additional solder, reducing installation time and ensuring a clean, professional finish. This 42mm stop end is particularly useful in tight spaces and is a cost-effective solution for residential or commercial plumbing projects.

MacDonald Plumbing Supplies MacSolder Ring Stop End 54mm

The MacSolder Ring Stop End 54mm is a high-quality copper fitting designed for sealing off the end of a pipe in plumbing and heating systems. Manufactured with lead-free solder and WRAS approved, this stop end is ideal for use with potable water, central heating, and gas systems. The integrated pre-soldered ring allows for fast and secure connections without the need for additional solder, reducing installation time and ensuring a clean, professional finish. This 54mm stop end is particularly useful in tight spaces and is a cost-effective solution for residential or commercial plumbing projects.

MacDonald Plumbing Supplies MacValve 15mm x ⅜ Chrome Plated Brass Straight Flat Face Iso Valve

The MacValve 15mm x ⅜" Chrome Plated Brass Straight Flat Face Iso Valve is a compact and reliable valve designed for isolating water supply to taps and appliances with ⅜" connections. Featuring a 15mm compression inlet and a ⅜" BSP flat face outlet, it provides a secure and leak-resistant connection. Its straight design is ideal for neat, direct installations where space is limited.

MacDonald Plumbing Supplies MacValve 15mm x ½ Chrome Plated Brass Straight Flat Face Iso Valve

The MacValve 15mm x ½" Chrome Plated Brass Straight Flat Face Iso Valve is a durable and reliable solution for isolating water supply to taps and appliances. Featuring a 15mm compression inlet and a ½" BSP flat face outlet, it provides a clean and secure connection. Its straight design is ideal for installations where a direct pipe run is required.

MacDonald Plumbing Supplies MacValve 15mm x ½ Chrome Plated Brass Angled Flat Face Iso Valve

The MacValve 15mm x ½" Chrome Plated Brass Angled Flat Face Iso Valve is a high-quality isolation valve designed for controlling water flow to taps, appliances, and sanitary fittings. Featuring a 15mm compression inlet and a ½" BSP flat face outlet, it provides a secure and reliable connection. Its angled design makes it ideal for installations in tight or confined spaces.

MacDonald Plumbing Supplies MacPress 15mm Stop Cock

The MacPress 15mm Stop Cock offers a secure, leak-proof solution for controlling water flow in residential and commercial plumbing systems. Featuring M Profile press-fit technology, it ensures fast and efficient installation. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 22mm Stop Cock

The MacPress 22mm Stop Cock offers a secure, leak-proof solution for controlling water flow in residential and commercial plumbing systems. Featuring M Profile press-fit technology, it ensures fast and efficient installation. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacValve 22mm Chrome Plated Angled Auto Bypass Valve

The MacValve 22mm Chrome Plated Angled Auto Bypass Valve is designed to maintain efficient water circulation in central heating systems. It automatically opens to allow flow when thermostatic radiator valves close, preventing pressure build-up and protecting system components. With adjustable pressure settings and a durable chrome-plated finish, it offers reliable and long-lasting performance.

MacDonald Plumbing Supplies MacTRV 15mm White Head TRV & Lockshield Pack

The MacTRV 15mm White Head TRV & Lockshield Pack is a complete solution for controlling radiator temperature efficiently. Featuring a 15mm angled thermostatic radiator valve and matching lockshield, it allows precise heat regulation while improving energy efficiency. With a liquid-filled sensor and built-in frost protection, it ensures consistent performance in domestic heating systems.

McAlpine MBSWSS85-90 Mini Basket Waste Bolt 85mm x 90mm

The McAlpine MBSWSS85-90 Mini Basket Waste Bolt 85mm x 90mm is a secure and durable fixing bolt designed to firmly attach mini basket strainer wastes in kitchen and utility sinks. Manufactured with precision to McAlpine’s high standards, this waste bolt ensures a leak-free and stable installation every time. Its 85mm x 90mm size is suitable for a wide range of waste fittings, offering an ideal solution for both replacements and new installations.

MacDonald Plumbing Supplies Refill For The MacPack Press Starter Kit For Gas

The Refill For The MacPack Press Starter Pack For Gas is designed to replenish your MacPress Starter Pack 1 with essential components for ongoing gas system installations. It includes 90 fittings to ensure your projects run smoothly and efficiently. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPack Press Starter Kit For Gas

Top up your MacPress fitting stock with the MacPack Press Refill Pack For Water – 15mm Fittings, designed for professional installers who value speed, safety, and simplicity. This refill pack includes 105 premium-quality 15mm M Profile press fittings for water applications – all neatly stored in a robust FatMac case for easy access on-site. Suitable for potable water, heating, and hot water systems, each fitting is WRAS Approved and compatible with standard copper tube. Perfect for topping up your MacPress Water Starter Pack or expanding your on-the-go fitting kit. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacValve Pushfit Stem Elbow 15mm x 10mm Chrome Plated

The MacValve Pushfit Stem Elbow 15mm x 10mm Chrome Plated is the perfect solution for creating angled connections in confined plumbing spaces. This pushfit fitting is designed for rapid, tool-free installation—just push to connect and achieve a strong, leak-resistant joint. With its corrosion-resistant chrome finish, it offers both durability and professional appearance, making it ideal for residential and commercial plumbing jobs.  

MacDonald Plumbing Supplies MacPress 22mm Red/Blue Lever Valves M Profile WRAS Approved

The MacPress 22mm Red/Blue Lever Valves M Profile are WRAS approved, offering reliable water flow control for press fit plumbing systems. Featuring convenient red and blue lever handles, they ensure easy operation and compliance with regulatory standards. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress 15mm Red/Blue Lever Valves M Profile WRAS Approved

The MacPress 15mm Red/Blue Lever Valves M Profile are WRAS approved, offering reliable water flow control for press fit plumbing systems. Featuring convenient red and blue lever handles, they ensure easy operation and compliance with regulatory standards. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Reducing Tee 15mm x 15mm x ½ - GAS

The MacPress Female Reducing Tee 15mm x 15mm x ½ – GAS provides a secure press-fit solution with two 15mm copper ends and a ½ inch BSP female threaded branch. Designed for gas installations, this tee features a yellow O-ring and full compliance with BS EN 1254-7. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Female Reducing Tee 22mm x 22mm x ½ - GAS

The MacPress Female Reducing Tee 22mm x 22mm x ½ – GAS provides a secure press-fit solution with two 22mm copper ends and a ½ inch BSP female threaded branch. Designed for gas installations, this tee features a yellow O-ring and full compliance with BS EN 1254-7. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Reducing Tee 35mm x 35mm x 15mm - GAS

The MacPress 35mm x 35mm x 15mm Reducing Tee – GAS offers a safe and flame-free solution for branching 15mm gas lines from 35mm mains. Designed for professional installers using M Profile tools.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducing Tee 42mm x 42mm x 15mm - GAS

The MacPress Reducing Tee 42mm x 42mm x 15mm – GAS allows you to branch a 15mm gas line off a 42mm main. Designed for safe, reliable installation using M Profile press tools.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducing Tee 54mm x 54mm x 28mm - GAS

The MacPress Reducing Tee 54mm x 54mm x 28mm – GAS enables a secure 28mm branch from a 54mm main gas supply. Featuring a yellow gas O-ring and press-fit design for fast, compliant installation.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Reducing Tee 54mm x 54mm x 35mm - GAS

The MacPress Reducing Tee 54mm x 54mm x 35mm – GAS enables a secure 35mm branch from a 54mm main gas supply. Featuring a yellow gas O-ring and press-fit design for fast, compliant installation.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Female Coupling 15mm x ½ - GAS

The MacPress Female Coupling 15mm x ½ – GAS is designed to connect 15mm copper pipe to ½ BSP female threaded components, specifically for gas applications. Featuring a yellow gas O-ring and compliance with BS EN 1254-7 standards. Backed by a 20-year warranty.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Coupling 15mm x ¾ - GAS

The MacPress Female Coupling 15mm x ¾ – GAS is designed to connect 15mm copper pipe to ¾ BSP female threaded components, ideal for gas applications. Featuring a yellow gas O-ring and compliance with BS EN 1254-7 standards. Backed by a 20-year warranty.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Coupling 22mm x ½ - GAS

The MacPress Female Coupling 22mm x ½" – GAS offers a safe, flame-free solution for joining 22mm copper tube to ½" BSP threaded gas components. Designed for professional use, it features a yellow O-ring for clear gas system identification. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Coupling 22mm x ¾ - GAS

The MacPress Female Coupling 22mm x ¾" – GAS connects copper pipe to ¾" BSP threaded gas components using secure M Profile press technology. Suitable for gas installations, marked with a yellow O-ring for easy identification. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Coupling 22mm x 1" - GAS

The MacPress Female Coupling 22mm x 1" – GAS is a gas-rated press-fit fitting designed for connecting copper pipe to 1" BSP threaded components. With its yellow O-ring and certified conformity, it ensures safe, professional gas installations.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Coupling 28mm x ¾ - GAS

The MacPress Female Coupling 28mm x ¾" – GAS connects 28mm copper pipe to a ¾" BSP female thread. Designed for gas installations, it features a yellow O-ring and complies fully with BS EN 1254-7, ideal for safe and professional gas system builds.   Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Backplate Elbow 15mm x ½ - GAS

The MacPress Backplate Elbow 15mm x ½ – GAS connects 15mm copper pipe to a ½ BSP male thread, perfect for gas applications. Featuring a yellow gas O-ring and compliance with BS EN 1254-7 standards. Supported by a 20-year warranty.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducing Tee 22mm x 22mm x 15mm - GAS

The MacPress 22mm x 22mm x 15mm Reducing Tee – GAS is a high-performance press-fit gas fitting designed for professional installers. Clearly marked for gas use with a yellow O-ring, this reducing tee ensures safe, efficient installation.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducing Tee 28mm x 28mm x 15mm - GAS

The MacPress 28mm x 28mm x 15mm Reducing Tee – GAS provides a secure and efficient way to branch off a 15mm pipe from a 28mm gas supply. Fully certified and designed for quick, flame-free installation.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducing Tee 28mm x 28mm x 22mm - GAS

The MacPress 28mm x 28mm x 22mm Reducing Tee – GAS allows for a reliable reduction from 28mm pipe to a 22mm branch in gas installations. A flame-free, press-fit solution engineered for safety and efficiency.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducing Tee 35mm x 35mm x 22mm - GAS

The MacPress 35mm x 35mm x 22mm Reducing Tee – GAS is designed for branching 22mm gas lines from 35mm mains. A reliable, WRAS-exempt press-fit fitting for certified gas professionals.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducing Tee 42mm x 42mm x 22mm - GAS

The MacPress Reducing Tee 42mm x 42mm x 22mm – GAS allows you to branch a 22mm gas line off a 42mm main. Designed for safe, reliable installation using M Profile press tools.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Reducing Tee 42mm x 42mm x 35mm - GAS

The MacPress Reducing Tee 42mm x 42mm x 35mm – GAS allows you to branch a 35mm gas line off a 42mm main. Designed for safe, reliable installation using M Profile press tools.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Reducing Tee 54mm x 54mm x 22mm - GAS

The MacPress Reducing Tee 54mm x 54mm x 22mm – GAS enables a secure 22mm branch from a 54mm main gas supply. Featuring a yellow gas O-ring and press-fit design for fast, compliant installation.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducing Tee 54mm x 54mm x 42mm - GAS

The MacPress Reducing Tee 54mm x 54mm x 42mm – GAS enables a secure 42mm branch from a 54mm main gas supply. Featuring a yellow gas O-ring and press-fit design for fast, compliant installation.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Reducing Tee 22mm x 15mm x 22mm - GAS

The MacPress 22mm x 15mm x 22mm Reducing Tee – GAS is a professional-grade press-fit solution for branching gas supply pipework. Featuring a yellow O-ring and M Profile compatibility, it delivers fast, flame-free installation and long-term reliability.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Male Coupling 54mm x 2" - GAS

The MacPress Male Coupling 54mm x 2" – GAS securely connects 54mm copper pipe to 2" BSP male threads, designed for gas applications. Features a yellow gas O-ring and compliance with BS EN 1254-7 standards. Backed by a 20-year warranty.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Female Coupling 28mm x 1" - GAS

The MacPress Female Coupling 28mm x 1" – GAS offers a reliable connection from 28mm copper press-fit pipe to 1" BSP female threaded fittings. Designed specifically for gas installations with a yellow O-ring and full compliance with BS EN 1254-7. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Female Coupling 35mm x 1¼ - GAS

The MacPress Female Coupling 35mm x 1¼" – GAS connects 35mm copper pipe to a 1¼" BSP female thread. Designed specifically for gas use, it features a yellow O-ring and complies with BS EN 1254-7:2021. Ideal for professional gas-safe installations.   Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Female Coupling 42mm x 1½ - GAS

The MacPress Female Coupling 42mm x 1½" – GAS offers a secure connection between 42mm copper pipe and a 1½" BSP female thread. Featuring a yellow O-ring for gas identification, it’s compliant with BS EN 1254-7:2021 and designed for professional gas-safe installations.   Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Female Coupling 54mm x 2" - GAS

The MacPress Female Coupling 54mm x 2" – GAS is a premium press-fit solution for large-scale gas installations. With a 54mm copper press connection and a 2" BSP female thread, this fitting features a yellow gas O-ring and complies with BS EN 1254-7:2021. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Male Coupling 15mm x ½ - GAS

The MacPress Male Coupling 15mm x ½" – GAS provides a secure transition from copper pipe to threaded fittings in gas systems. Engineered with a yellow O-ring and designed for safe, flame-free gas installations.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacValve 15mm x ½ Male Iron Monobloc Tail Adaptor

The MacValve 15mm x ½" Male Iron Monobloc Tail Adaptor is a practical solution for converting standard 15mm valves or flexi tap connectors into a flat face connection. Designed specifically for use with monobloc taps featuring flexible tails and ½" swivel nuts, this adaptor fits neatly into an isolating valve to provide a reliable flat face sealing surface. Ideal for both new installations and replacement work, it ensures a secure and professional connection while helping to eliminate leaks caused by mismatched fittings. Suitable for everyday plumbing applications, it offers convenience, compatibility, and dependable performance.

MacDonald Plumbing Supplies MacValve 15mm x ⅜ Male Iron Monobloc Tail Adaptor

The MacValve 15mm x 3/8" Male Iron Monobloc Tail Adaptor is designed to convert standard 15mm valves or flexi tap connectors into a flat face connection suitable for monobloc taps with 3/8" flexible tails. By fitting directly into an isolating valve, it provides a clean, flat sealing surface for the swivel nut on the tap tail, helping to achieve a secure and leak-free installation. Ideal for both new installations and replacement work, this adaptor offers a simple and effective solution for modern tap connections in domestic and commercial plumbing applications.

Regin Combination Pliers 1000V 160mm REGE210

The Regin Combination Pliers 1000V 160mm REGE210 are designed for safe and reliable use in electrical environments. Fully insulated and individually tested, they provide protection when working on live circuits up to 1000V. With a compact 160mm size, they offer excellent control for precision tasks while maintaining the strength needed for gripping, cutting and twisting. Ideal for electricians, plumbers and heating engineers, these pliers combine safety, durability and comfort, making them an essential tool for compliant and efficient working on site.

MacDonald Plumbing Supplies MacPress Obtuse Elbow 54mm - GAS

The MacPress 54mm Obtuse Gas Elbow is BS EN 1254-7 approved, featuring a yellow O-ring and gas marking for clear gas system identification. Ideal for gentle directional changes in gas pipework, it delivers a secure, flame-free press connection.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Equal Tee 42mm - GAS

The MacPress 42mm Equal Tee is a high-quality gas fitting featuring a yellow O-ring and gas conformity marking, designed for safe and secure press-fit connections in gas systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Obtuse Street Elbow 54mm - GAS

The MacPress 54mm Obtuse Street Elbow is designed for gas pipe installations. Featuring a yellow O-ring and clear gas markings, this fitting offers reliable and secure press-fit connections for natural gas and LPG systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Elbow 54mm - GAS

The MacPress 54mm Gas Elbow features a yellow O-ring and gas conformity marking, offering a reliable, flame-free solution for directional changes in copper gas pipework for both domestic and commercial applications.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Street Elbow 54mm - GAS

The MacPress 54mm Street Elbow is designed for gas installations, featuring a yellow O-ring and gas conformity marking, ensuring a safe and secure press-fit connection for natural gas and LPG systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Equal Tee 54mm - GAS

The MacPress 54mm Equal Tee is a high-quality gas fitting featuring a yellow O-ring and gas conformity marking, designed for safe and secure press-fit connections in gas systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Equal Tee 35mm - GAS

The MacPress 35mm Equal Tee is a high-quality gas fitting featuring a yellow O-ring and gas conformity marking, designed for safe and secure press-fit connections in gas systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Coupling 54mm - GAS

The MacPress 54mm Gas Coupling features a yellow O-ring and gas conformity marking, offering a safe and certified solution for connecting copper pipe in domestic and commercial gas installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Obtuse Elbow 42mm - GAS

The MacPress 42mm Obtuse Gas Elbow is BS EN 1254-7 approved, featuring a yellow O-ring and gas marking for clear gas system identification. Ideal for gentle directional changes in gas pipework, it delivers a secure, flame-free press connection.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Obtuse Street Elbow 42mm - GAS

The MacPress 42mm Obtuse Street Elbow is designed for gas pipe installations. Featuring a yellow O-ring and clear gas markings, this fitting offers reliable and secure press-fit connections for natural gas and LPG systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Elbow 42mm - GAS

The MacPress 42mm Gas Elbow features a yellow O-ring and gas conformity marking, offering a reliable, flame-free solution for directional changes in copper gas pipework for both domestic and commercial applications.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Street Elbow 42mm - GAS

The MacPress 42mm Street Elbow is designed for gas installations, featuring a yellow O-ring and gas conformity marking, ensuring a safe and secure press-fit connection for natural gas and LPG systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducer 42mm x 28mm - GAS

The MacPress Reducer 42mm x 28mm – GAS offers a reliable solution for reducing the gas supply from 42mm to 28mm. Featuring a yellow gas O-ring for easy identification and guaranteed compliance with industry standards.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Reducer 35mm x 22mm - GAS

The MacPress Reducer 35mm x 22mm – GAS offers a reliable solution for reducing the gas supply from 35mm to 22mm. Featuring a yellow gas O-ring for easy identification and guaranteed compliance with industry standards.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Coupling 42mm - GAS

The MacPress 42mm Gas Coupling features a yellow O-ring and gas conformity marking, offering a safe and certified solution for connecting copper pipe in domestic and commercial gas installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Obtuse Elbow 35mm - GAS

The MacPress 35mm Obtuse Gas Elbow is BS EN 1254-7 approved, featuring a yellow O-ring and gas marking for clear gas system identification. Ideal for gentle directional changes in gas pipework, it delivers a secure, flame-free press connection.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Elbow 35mm - GAS

The MacPress 35mm Gas Elbow features a yellow O-ring and gas conformity marking, offering a reliable, flame-free solution for directional changes in copper gas pipework for both domestic and commercial applications.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Obtuse Street Elbow 35mm - GAS

The MacPress 35mm Obtuse Street Elbow is designed for gas pipe installations. Featuring a yellow O-ring and clear gas markings, this fitting offers reliable and secure press-fit connections for natural gas and LPG systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Street Elbow 35mm - GAS

The MacPress 35mm Street Elbow is designed for gas installations, featuring a yellow O-ring and gas conformity marking, ensuring a safe and secure press-fit connection for natural gas and LPG systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducer 54mm x 42mm - GAS

The MacPress Reducer 54mm x 42mm – GAS offers a reliable solution for reducing the gas supply from 54mm to 42mm. Featuring a yellow gas O-ring for easy identification and guaranteed compliance with industry standards.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Coupling 35mm - GAS

The MacPress 35mm Gas Coupling features a yellow O-ring and gas conformity marking, offering a safe and certified solution for connecting copper pipe in domestic and commercial gas installations. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Reducer 35mm x 28mm - GAS

The MacPress Reducer 35mm x 28mm – GAS offers a reliable solution for reducing the gas supply from 35mm to 28mm. Featuring a yellow gas O-ring for easy identification and guaranteed compliance with industry standards.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Stop End 54mm - WATER

The MacPress Stop End 54mm provides a clean and secure termination point for copper pipework in water systems. Ideal for heating, hot water and potable water applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Stop End 42mm - WATER

The MacPress Stop End 42mm provides a clean and secure termination point for copper pipework in water systems. Ideal for heating, hot water and potable water applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacCompression Stop End 54mm

Discover top-quality Compression Stop Ends, perfect for various applications including central heating and hot & cold water supplies. No soldering or heat required, these fittings are convenient for confined spaces, offering a cost-effective and reliable solution. WRAS approved and compliant with BSEN1254-2 standards, ensuring suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacPress Obtuse Elbow 28mm - GAS

The MacPress 28mm Obtuse Gas Elbow is BS EN 1254-7 approved, featuring a yellow O-ring and gas marking for clear gas system identification. Ideal for gentle directional changes in gas pipework, it delivers a secure, flame-free press connection.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Equal Tee 28mm - GAS

The MacPress 28mm Equal Tee is a high-quality gas fitting featuring a yellow O-ring and gas conformity marking, designed for safe and secure press-fit connections in gas systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Obtuse Street Elbow 28mm - GAS

The MacPress 28mm Obtuse Street Elbow is designed for gas pipe installations. Featuring a yellow O-ring and clear gas markings, this fitting offers reliable and secure press-fit connections for natural gas and LPG systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Street Elbow 28mm - GAS

The MacPress 28mm Street Elbow is designed for gas installations, featuring a yellow O-ring and gas conformity marking, ensuring a safe and secure press-fit connection for natural gas and LPG systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Elbow 28mm - GAS

The MacPress 28mm Gas Elbow features a yellow O-ring and gas conformity marking, offering a reliable, flame-free solution for directional changes in copper gas pipework for both domestic and commercial applications.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies Red & Blue Lever Ball Valve 22mm Full Bore WRAS Approved

The Red & Blue Lever Ball Valve 22mm Full Bore WRAS Approved provides a reliable and efficient solution for controlling water flow in plumbing systems. Featuring a full bore design, it allows unrestricted water passage, minimising pressure drop and maximising system efficiency. The dual-colour lever handles (red for hot and blue for cold) ensure clear identification, simplifying installation and maintenance. WRAS approved, this valve meets stringent UK standards for potable water, ensuring safety and compliance. Suitable for both domestic and commercial applications, it delivers long-lasting performance, durability, and ease of use.

MacDonald Plumbing Supplies MacCompression Stop End 42mm

Discover top-quality Compression Stop Ends, perfect for various applications including central heating and hot & cold water supplies. No soldering or heat required, these fittings are convenient for confined spaces, offering a cost-effective and reliable solution. WRAS approved and compliant with BSEN1254-2 standards, ensuring suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacPress Stop End 28mm - GAS

The MacPress 28mm Stop End is a robust and reliable press-fit fitting designed for safely terminating gas pipe runs, featuring a yellow O-ring and gas conformity marking for clear identification.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Stop End 35mm - WATER

The MacPress Stop End 35mm provides a clean and secure termination point for copper pipework in water systems. Ideal for heating, hot water and potable water applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Coupling 28mm - GAS

The MacPress 28mm Gas Coupling features a yellow O-ring and gas conformity marking, offering a safe and certified solution for connecting copper pipe in domestic and commercial gas installations. Installation Instructions for Press Fittings 1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Reducer 28mm x 15mm - GAS

The MacPress Reducer 28mm x 15mm – GAS offers a reliable solution for reducing the gas supply from 28mm to 15mm. Featuring a yellow gas O-ring for easy identification and guaranteed compliance with industry standards.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Reducer 28mm x 22mm - GAS

The MacPress Reducer 28mm x 22mm – GAS offers a reliable solution for reducing the gas supply from 28mm to 22mm. Featuring a yellow gas O-ring for easy identification and guaranteed compliance with industry standards.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Equal Tee 22mm - GAS

The MacPress 22mm Equal Tee is a high-quality gas fitting featuring a yellow O-ring and gas conformity marking, designed for safe and secure press-fit connections in gas systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacCompression Stop End 35mm

Discover top-quality Compression Stop Ends, perfect for various applications including central heating and hot & cold water supplies. No soldering or heat required, these fittings are convenient for confined spaces, offering a cost-effective and reliable solution. WRAS approved and compliant with BSEN1254-2 standards, ensuring suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacPress Stop End 28mm - WATER

The MacPress Stop End 28mm provides a clean and secure termination point for copper pipework in water systems. Ideal for heating, hot water and potable water applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Stop End 22mm - GAS

The MacPress 22mm Stop End is a robust and reliable press-fit fitting designed for safely terminating gas pipe runs, featuring a yellow O-ring and gas conformity marking for clear identification.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Street Elbow 22mm - GAS

The MacPress 22mm Street Elbow is designed for gas installations, featuring a yellow O-ring and gas conformity marking, ensuring a safe and secure press-fit connection for natural gas and LPG systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Stop End 15mm - GAS

The MacPress 15mm Stop End is a robust and reliable press-fit fitting designed for safely terminating gas pipe runs, featuring a yellow O-ring and gas conformity marking for clear identification.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Obtuse Elbow 22mm - GAS

The MacPress 22mm Obtuse Gas Elbow is BS EN 1254-7 approved, featuring a yellow O-ring and gas marking for clear gas system identification. Ideal for gentle directional changes in gas pipework, it delivers a secure, flame-free press connection.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Obtuse Street Elbow 22mm - GAS

The MacPress 22mm Obtuse Street Elbow is designed for gas pipe installations. Featuring a yellow O-ring and clear gas markings, this fitting offers reliable and secure press-fit connections for natural gas and LPG systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Equal Tee 15mm - GAS

The MacPress 15mm Equal Tee is a high-quality gas fitting featuring a yellow O-ring and gas conformity marking, designed for safe and secure press-fit connections in gas systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Stop End 22mm - WATER

The MacPress Stop End 22mm provides a clean and secure termination point for copper pipework in water systems. Ideal for heating, hot water and potable water applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Elbow 22mm - GAS

The MacPress 22mm Gas Elbow features a yellow O-ring and gas conformity marking, offering a reliable, flame-free solution for directional changes in copper gas pipework for both domestic and commercial applications.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Coupling 22mm - GAS

The MacPress 22mm Gas Coupling features a yellow O-ring and gas conformity marking, offering a safe and certified solution for connecting copper pipe in domestic and commercial gas installations. Installation Instructions for Press Fittings 1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Stop End 15mm - WATER

The MacPress Stop End 15mm provides a clean and secure termination point for copper pipework in water systems. Ideal for heating, hot water and potable water applications. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Reducer 22mm x 15mm - GAS

Compatibility: Connection: ‘M’ Profile Tube: Copper tube made in accordance with EN1057 Parameters: Temperature Range: -20°C to 70°C Maximum Pressure: 5 Bar Materials: ‘O’ Ring: HNBR (Hydrogenated Nitrile Butadiene Rubber) Copper: CW024A Brass: CW511L Approvals: Made in accordance with EN 1254 Applications: 1st, 2nd & 3rd Family Gases Compressed Air *For above ground use only*

MacDonald Plumbing Supplies MacPress Obtuse Elbow 15mm - GAS

The MacPress 15mm Obtuse Gas Elbow is BS EN 1254-7 approved, featuring a yellow O-ring and gas marking for clear gas system identification. Ideal for gentle directional changes in gas pipework, it delivers a secure, flame-free press connection.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Street Elbow 15mm - GAS

The MacPress 15mm Street Elbow is designed for gas installations, featuring a yellow O-ring and gas conformity marking, ensuring a safe and secure press-fit connection for natural gas and LPG systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies Red & Blue Lever Ball Valve 15mm Full Bore WRAS Approved

The Red & Blue Lever Ball Valve 15mm Full Bore WRAS Approved is a high-quality valve designed for reliable flow control in plumbing systems. With a full bore design, it allows unrestricted water flow, reducing pressure loss and enhancing system efficiency. The dual-colour lever handles (red for hot and blue for cold) provide clear identification, making installation and maintenance simple and safe. WRAS approved, this valve meets strict UK standards for potable water applications, ensuring compliance and safety. Ideal for both domestic and commercial installations, it delivers robust performance, long service life, and ease of use.

MacDonald Plumbing Supplies MacPress Elbow 15mm - GAS

The MacPress 15mm Gas Elbow features a yellow O-ring and gas conformity marking, offering a reliable, flame-free solution for directional changes in copper gas pipework for both domestic and commercial applications.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Obtuse Street Elbow 15mm - GAS

The MacPress 15mm Obtuse Street Elbow is designed for gas pipe installations. Featuring a yellow O-ring and clear gas markings, this fitting offers reliable and secure press-fit connections for natural gas and LPG systems.  Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.  

MacDonald Plumbing Supplies MacPress Coupling 15mm - GAS

The MacPress 15mm Gas Coupling features a yellow O-ring and gas conformity marking, offering a safe and certified solution for connecting copper pipe in domestic and commercial gas installations. Installation Instructions for Press Fittings 1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacCompression Stop End 28mm

Discover top-quality Compression Stop Ends, perfect for various applications including central heating and hot & cold water supplies. No soldering or heat required, these fittings are convenient for confined spaces, offering a cost-effective and reliable solution. WRAS approved and compliant with BSEN1254-2 standards, ensuring suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacSolder Ring Stop End 28mm

Our Solder Ring fittings are manufactured with lead free solder and are suitable for use with potable water, central heating and gas. Solder Ring Fittings benefit from a pre-soldered ring that saves time when installing new pipework or repairing and old run.

MacDonald Plumbing Supplies MacCompression Stop End 22mm

Discover top-quality Compression Stop Ends, perfect for various applications including central heating and hot & cold water supplies. No soldering or heat required, these fittings are convenient for confined spaces, offering a cost-effective and reliable solution. WRAS approved and compliant with BSEN1254-2 standards, ensuring suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacCompression Stop End 8mm

Discover top-quality Compression Stop Ends, perfect for various applications including central heating and hot & cold water supplies. No soldering or heat required, these fittings are convenient for confined spaces, offering a cost-effective and reliable solution. WRAS approved and compliant with BSEN1254-2 standards, ensuring suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacCompression Stop End 10mm

Discover top-quality Compression Stop Ends, perfect for various applications including central heating and hot & cold water supplies. No soldering or heat required, these fittings are convenient for confined spaces, offering a cost-effective and reliable solution. WRAS approved and compliant with BSEN1254-2 standards, ensuring suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacCompression Stop End 15mm

Discover top-quality Compression Stop Ends, perfect for various applications including central heating and hot & cold water supplies. No soldering or heat required, these fittings are convenient for confined spaces, offering a cost-effective and reliable solution. WRAS approved and compliant with BSEN1254-2 standards, ensuring suitability for potable water and central heating systems.

MacDonald Plumbing Supplies MacSolder Ring Stop End 22mm

Our Solder Ring fittings are manufactured with lead free solder and are suitable for use with potable water, central heating and gas. Solder Ring Fittings benefit from a pre-soldered ring that saves time when installing new pipework or repairing and old run.

MacDonald Plumbing Supplies MacEndfeed Stop End 28mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacEndfeed Stop End 22mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies MacSolder Ring Stop End 15mm

Our Solder Ring fittings are manufactured with lead free solder and are suitable for use with potable water, central heating and gas. Solder Ring Fittings benefit from a pre-soldered ring that saves time when installing new pipework or repairing and old run.

MacDonald Plumbing Supplies Chrome Plated Isolating Valve With Black Lever 15mm WRAS

Chrome Plated Isolating Valve With Black Lever 15mm WRAS. Designed for both form and function, this high-quality valve features a sleek chrome-plated finish paired with a striking black lever handle for effortless control and modern appeal. Engineered for 15mm pipework, it provides easy isolation of water flow during maintenance or repairs. Suitable for both domestic and commercial systems, this WRAS approved valve delivers reliable performance and refined aesthetics.

MacDonald Plumbing Supplies MacEndfeed Stop End 15mm WRAS APPROVED

Our Endfeed fittings are suitable for use on a wide variety of applications. They are of a compact design ideal for use in areas of limited space. Endfeed fittings from MacDonald Plumbing Supplies are WRAS approved

MacDonald Plumbing Supplies WRAS Approved Flexi Tap Connector 15mm x 1/2" x 300mm

The WRAS Approved Flexi Tap Connector 15mm x 1/2" x 300mm is a high-quality flexible plumbing connector designed to provide a secure and leak-free connection between a tap and the water supply pipe. With a durable stainless steel braided outer layer and EPDM rubber inner tube, it offers excellent flexibility, strength, and resistance to corrosion. WRAS approval ensures suitability for potable water systems and compliance with water regulations.

MacDonald Plumbing Supplies WRAS Approved Flexi Tap Connector with Isolator 15mm x 1/2" x 300mm

The WRAS Approved Flexi Tap Connector with Isolator 15mm x 1/2" x 300mm is a high-quality flexible plumbing connector designed to provide a secure and convenient connection between a tap and the water supply. Featuring an integrated isolator valve, it allows water flow to be shut off at the point of connection for easy maintenance and servicing. Constructed with a stainless steel braided outer layer and EPDM inner tube, it offers durability, flexibility, and WRAS approved safety for potable water systems.

Speedfit 15mm Stop End PSE4615W (Pack of 10)

The Speedfit 15mm Stop End PSE4615W offers a simple and secure solution for capping off 15mm pipework in both temporary and permanent installations. This push-fit fitting can be easily installed and demounted without tools, making it perfect for situations where you need to pause work or perform pressure testing. It is WRAS approved for use with hot and cold water and central heating systems. Manufactured in the UK and backed by a 50-year guarantee.  

Speedfit 22mm Stop End PSE4622W (Pack of 5)

The Speedfit 22mm Stop End PSE4622W offers a reliable solution for capping off 22mm pipework at termination points, ideal for both temporary and permanent installations. This push-fit fitting ensures a quick, tool-free installation and removal, perfect for situations where work needs to pause or pressure testing is required. It is WRAS approved for use with hot and cold water systems, offering a secure and corrosion-resistant seal. Designed, manufactured, and assembled in the UK, and supported by a 50-year guarantee.  

Speedfit 28mm Stop End PSE4628W (Pack of 5)

The Speedfit 28mm Stop End PSE4628W offers an efficient solution for capping off 28mm pipework at termination points, whether temporarily or permanently. This tool-free push-fit fitting allows for fast installation and removal, making it ideal for situations requiring water to be turned off temporarily or for pressure testing systems before appliances are connected. WRAS approved, it is compatible with hot and cold water systems and comes with a 50-year guarantee. Designed and manufactured in the UK.  

Speedfit 15mm Emergency Shut Off Tap 15ESOT (Pack of 5)

The Speedfit 15mm Emergency Shut Off Tap offers instant water isolation with a simple quarter-turn knob, making it ideal for emergency or maintenance situations. Quick to install and remove without tools or hot works, this compact valve is suitable for hot and cold water systems and is WRAS approved for reliability. Compatible with both copper and plastic pipework, it's perfect for tight or inaccessible spaces.  

Speedfit 15mm Double Check Valve 15DCV (Pack of 5)

The Speedfit 15mm Double Check Valve is designed to prevent the backflow of potentially contaminated water, offering reliable fluid category 3 protection. Its push-fit connection enables rapid, tool-free installation and easy demounting, saving time and effort on site. Compatible with both copper and plastic pipe systems, this compact valve is ideal for domestic and commercial plumbing setups, offering a flame-free and secure fitting without the need for glue or solder. Not suitable for central heating.  

Speedfit 15mm Double Check Service Valve 15DCSV

The Speedfit 15mm Double Check Service Valve offers reliable fluid category 3 backflow protection with integrated isolation, ideal for preventing contamination in domestic and commercial plumbing systems. With a tool-free push-fit design, it allows for quick installation and demounting, saving time and labour. Compatible with copper and plastic pipe systems, this NON WRAS-compliant valve features a flame-free, secure Grip & Seal™ connection and is perfect for hot and cold water systems (excluding central heating).  

Speedfit 15mm Brass Chrome Plated Ball Valve 15BV

The Speedfit 15mm Brass Chrome Plated Ball Valve is a premium push-fit isolation valve, designed to quickly stop water flow for maintenance or emergencies. With a robust brass body and a stylish chrome finish, it connects seamlessly to copper or plastic pipe without tools or hot works. The integrated handle offers instant control, and the valve is fully demountable, making it ideal for both new installs and retrofits. WRAS approved and manufactured in the UK for lasting performance.  

Speedfit 10mm Stop End PSE4610W (Pack of 10)

The Speedfit 10mm Stop End PSE4610W provides a fast, secure solution for capping off 10mm pipework in both temporary and permanent installations. Its push-fit design allows for easy installation and removal without tools, making it ideal for situations where work needs to be paused or when pressure testing a system. The fitting is made to the highest standards in the UK and is WRAS approved for both hot and cold water and central heating systems. Backed by a 50-year guarantee.  

Rob Pond Self Cutting Drain Off Cock

The Self Cutting Drain Off Cock is a practical and efficient solution for draining water from plumbing and heating systems without the need for pipe cutting or system dismantling. Designed for quick installation on 15mm copper pipe, it allows plumbers to create an instant drain point even when existing drain valves are inaccessible. Ideal for emergency work and maintenance tasks, this reusable tool enables fast, clean system draining with minimal spillage, making it an essential addition to any professional plumbing kit.

MacDonald Plumbing Supplies MacValve 15mm WRAS Filling Loop Part L

The MacValve 15mm WRAS Filling Loop Part L is a reliable and compliant solution for refilling and maintaining pressure in domestic and commercial heating systems. Designed to meet Part L regulations and fully WRAS approved, it ensures safe operation while preventing backflow contamination. Suitable for use with boilers and other pressurised systems, this filling loop offers a straightforward and dependable method for topping up system pressure.

MacDonald Plumbing Supplies MacPress Long Tail Drain Off Valve Type A 15mm

The MacPress Long Tail Drain Off Valve Type A 15mm offers efficient drainage for gas, LPG, and fuel oil systems. Approved by British Gas to EN 331 standards, this durable valve is ideal for residential and commercial applications, providing reliable performance in demanding environments.     Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.