MacDonald Plumbing Supplies MacPress Obtuse Elbow 54mm - WATER

The MacPress 54mm Obtuse Elbow is a WRAS approved press fitting ideal for heating, hot water, and potable systems. Designed with the trusted M-Profile for a secure, leak-free connection. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Obtuse Elbow 42mm - WATER

The MacPress 42mm Obtuse Elbow is a WRAS approved press fitting ideal for heating, hot water, and potable systems. Designed with the trusted M-Profile for a secure, leak-free connection. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Obtuse Elbow 35mm - WATER

The MacPress 35mm Obtuse Elbow is a WRAS approved press fitting ideal for heating, hot water, and potable systems. Designed with the trusted M-Profile for a secure, leak-free connection. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Obtuse Elbow 28mm - WATER

The MacPress 28mm Obtuse Elbow is a WRAS approved press fitting ideal for heating, hot water, and potable systems. Designed with the trusted M-Profile for a secure, leak-free connection. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Obtuse Elbow 22mm - WATER

The MacPress 22mm Obtuse Elbow is a WRAS approved press fitting ideal for heating, hot water, and potable systems. Designed with the trusted M-Profile for a secure, leak-free connection. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.

MacDonald Plumbing Supplies MacPress Obtuse Elbow 15mm - WATER

The MacPress 15mm Obtuse Elbow is a WRAS approved press fitting ideal for heating, hot water, and potable systems. Designed with the trusted M-Profile for a secure, leak-free connection. Installation Instructions for Press Fittings   1. Ensure the copper tube is cut squarely. 2. Deburr the pipe internally and externally to form a smooth edge. 3. Check that the ‘O’ ring of the fitting is seated correctly and free from impurities. 4. Do not use jointing compound, oil or grease. 5. Insert the tube to the full depth of the socket. 6. Clearly mark the tube at full depth. 7. Aline the fitting with the jaw of the tool correctly. 8. Make the press connection, using a suitable M profile jaw.